| 00:23.19 | narnia | brlcad, well after numerous reading of -11ed2 i think i finally understand 'total_over' and 'andor'. |
| 02:01.23 | brlcad | cool |
| 02:05.52 | CIA-3 | BRL-CAD: 03brlcad * 10brlcad/sh/make_pkg.sh: root authorization and yes, it's required for the compat folks too |
| 02:53.24 | CIA-3 | BRL-CAD: 03brlcad * 10brlcad/sh/make_pkg.sh: create pax files in cpio format and strip the leading slash so that the stored archive loation is relative |
| 03:51.14 | CIA-3 | BRL-CAD: 03brlcad * 10brlcad/src/mged/cmd.c: avoid segment violation on a short argv[1] |
| 04:03.55 | brlcad | ouch |
| 04:48.03 | narnia | brlcad, for a first draft of the express interface for brl-cad instead of attempting both ap203/ap214 would just ap203 be acceptable? |
| 04:49.25 | narnia | brlcad, the reason i ask that is because the by learning from the mistakes i make with a simple ap would allow additional aps to go more smoothly. |
| 04:56.12 | narnia | brlcad, s/simple/single/ |
| 05:25.23 | brlcad | narnia: of course |
| 05:29.18 | brlcad | that makes sense regardless to just get one working first |
| 05:33.09 | brlcad | ap214 is less common since it was ratified a couple years after, though it is the one with csg |
| 05:37.06 | narnia | brlcad, i am writing some perl scripts to help me work through the changes to libexpress. |
| 05:39.42 | narnia | i was looking at ap210 not sure about that on. it is mainly electronic. that was the one a member of step-os suggested. |
| 05:40.37 | narnia | i still am trying to figure out what STEPmod on sourceforge is all about. i am not into xml or dtd. |
| 05:42.12 | narnia | i have come to the conclusion that there is alot of verbose meaningless junk on the internet about step. the wg11 mailing list. talk about egos. |
| 08:54.40 | *** join/#brlcad cad754 (~d9c90ba5@bz.bzflag.bz) | |
| 09:20.52 | CIA-3 | BRL-CAD: 03brlcad * 10brlcad/sh/make_pkg.sh: copy the archive into a temporary root for creating a proper bill of materials |
| 10:10.09 | *** join/#brlcad Pimpinella (~frank@p5082073D.dip0.t-ipconnect.de) | |
| 17:16.41 | *** join/#brlcad asheron (~asheron@82-197-206-191.dsl.cambrium.nl) | |
| 19:06.25 | brlcad | hello asheron |
| 19:18.04 | *** join/#brlcad EricWilhelm (~ewilhelm@adsl-68-93-193-152.dsl.tpkaks.swbell.net) | |
| 19:18.22 | EricWilhelm | anybody know of some open-source cam software? |
| 19:19.04 | EricWilhelm | (I know, what a great Sunday-afternoon question.) |
| 19:21.56 | brlcad | EricWilhelm: nope, not a one |
| 19:23.28 | brlcad | that's part of what's being worked on now with the step converter and g-code converter |
| 19:41.16 | *** join/#brlcad Koolosh (~renato@200164252211.user.veloxzone.com.br) | |
| 19:45.02 | narnia | EricWilhelm, i am working on that. |
| 19:45.55 | narnia | EricWilhelm, just in the last week we have received significant help in that area. |
| 19:47.01 | narnia | EricWilhelm, basically three separate projects are being either merged or glued together to give us opensource cad-cam. |
| 19:47.41 | narnia | EricWilhelm, brl-cad, emc, and my project http://sourceforge.net/projects/gnu-cad-cam |
| 19:49.41 | narnia | EricWilhelm, emc http://sourceforge.net/projects/emc and of course brl-cad http://sourceforge.net/projects/brlcad |
| 19:49.56 | narnia | brlcad, did i miss anything? |
| 19:50.23 | brlcad | that's about right |
| 19:58.52 | *** part/#brlcad Koolosh (~renato@200164252211.user.veloxzone.com.br) | |
| 20:01.33 | narnia | brlcad, it is beautiful here today, 60+f, sunny, lite breeze. |
| 20:01.56 | brlcad | yeah, gorgeous here too .. looking to wander out |
| 20:02.01 | narnia | i am going outside to enjoy it with tom, the new puppy. ;-) |
| 20:03.13 | narnia | tell you what let's go play outside and pick things up later. ;-) |
| 20:10.00 | brlcad | heh, :) |
| 20:40.50 | EricWilhelm | that sounds awesome! |
| 20:43.09 | narnia | EricWilhelm, it is. ;-) |
| 20:43.41 | EricWilhelm | both the weather and the collaboration :-) |
| 20:44.04 | brlcad | ~weather kbwi |
| 20:44.48 | EricWilhelm | I'll be lurking, hoping to do some good with the uber-converter. |
| 20:44.57 | EricWilhelm | ~weather kci |
| 20:45.21 | brlcad | ~weather kkci |
| 20:45.53 | brlcad | closest national airport is usually an easy icao code |
| 20:46.43 | EricWilhelm | ~weather klwc |
| 20:47.06 | brlcad | chilly |
| 20:47.50 | EricWilhelm | and since I just sold my house, next month's weather is in: |
| 20:47.55 | EricWilhelm | ~weather kpdx |
| 20:48.35 | brlcad | ahh, that's got to be an improvement :) |
| 20:48.41 | EricWilhelm | oo. hope it warms up a bit before I get there :-) |
| 20:50.21 | EricWilhelm | narnia, where are you keeping the code base? do you have a mailing list? |
| 21:03.12 | narnia | EricWilhelm, code base is currently on my computers. no mailing list as of yet. |
| 21:04.37 | narnia | -weather kdkb |
| 21:05.02 | narnia | ~weather kdkb |
| 21:30.52 | danfalck | EricWilhelm: so, you're moving to Portland, Or? |
| 21:32.12 | danfalck | EricWilhem: I'm interested in CAM and work in Portland, Or |
| 21:32.52 | danfalck | EricWilhelm: I use EMC to control machines and need an opensource CAM package. |
| 22:17.05 | EricWilhelm | danfalck, we should talk |
| 22:17.15 | EricWilhelm | http://scratchcomputing.com |
| 22:37.26 | danfalck | EricWilhelm: sorry I was out riding my bike for a bit |
| 22:39.05 | danfalck | EricWilhelm: you are on the linuxcad mailing list, right? |
| 22:39.35 | danfalck | or I should say the one that phrostie started for open source cad software |
| 22:40.24 | narnia | danfalck, hello, how goes it? was out playing with tom, the new puppy. beautiful day. |
| 22:40.44 | danfalck | narnia: it's a beautiful day here as well |
| 22:40.49 | narnia | danfalck, did you see my comments above? |
| 22:41.11 | danfalck | narnia: some of them |
| 22:41.22 | danfalck | narnia: how are you doing? |
| 22:42.02 | narnia | danfalck, this past week brlcad and i have been given access to the iso step documents. big help having those documents. |
| 22:42.27 | danfalck | narnia: so you are migrating some libraries (express?) |
| 22:43.01 | narnia | danfalck, i am working on getting the nist scl3-2 libexpress updated to 10303-11ed2. |
| 22:44.02 | narnia | danfalck, working on the parse, bison/yacc and flex/lex, to read in iso-10303-21 files. |
| 22:45.18 | narnia | danfalck, ap203 is the next milestone. once that is done map from ap203 to brl-cad database. |
| 22:46.03 | narnia | danfalck, scoping out the requirements to generate g-code from a bdl-cad database. |
| 22:46.34 | danfalck | narnia: wow. |
| 22:46.45 | narnia | danfalck, man need to rewrite some on the code i am recycling from my project. |
| 22:46.57 | danfalck | narnia: I'm not a programmer, so that all sounds like a lot of heavy lifting... |
| 22:47.25 | danfalck | narnia: I do appreciate your effort |
| 22:47.51 | narnia | danfalck, a large portion of the code exists, needs to be updated to latest editions of iso documents and glued together. |
| 22:48.12 | danfalck | narnia: the gnu_cad_cam code? |
| 22:48.22 | narnia | danfalck, yes |
| 22:48.36 | danfalck | narnia: is it on sourceforge? |
| 22:50.05 | narnia | danfalck, gnu_cad_cam design document is on sourceforge. trying to work through the projects. brl-cad and emc will be loosely coupled after the merge. |
| 22:50.28 | danfalck | narnia: great |
| 22:50.29 | narnia | danfalck, gnu_cad_cam will eventually go away. |
| 22:51.13 | narnia | danfalck, replaced by the new interfaces to brl-cad and between brl-cad and emc. |
| 22:52.49 | narnia | danfalck, eventually want brl-cad and emc to 'talk' step-nc. |
| 22:54.26 | danfalck | narnia: I need to step out for a bit. My kids and I are going to build cork guns. |
| 22:54.32 | danfalck | good chatting |
| 23:23.51 | *** join/#brlcad guu` (guu@myth.gibbscam.com) | |
| 23:29.24 | *** join/#brlcad danfalck (~danfalck@wbar1.sea1-4-5-017-067.sea1.dsl-verizon.net) [NETSPLIT VICTIM] | |
| 23:36.38 | *** join/#brlcad EricWilhelm (~ewilhelm@adsl-68-93-193-152.dsl.tpkaks.swbell.net) [NETSPLIT VICTIM] | |