| 00:19.36 | Twingy | hrm |
| 00:19.39 | Twingy | opteron build problems |
| 00:19.46 | Twingy | Making all in db |
| 00:19.47 | Twingy | ../src/conv/asc2g axis.asc axis.g |
| 00:19.47 | Twingy | ../src/conv/asc2g boolean-ops.asc boolean-ops.g |
| 00:19.47 | Twingy | ../src/conv/asc2g castle.asc castle.g |
| 00:19.47 | Twingy | ../src/conv/asc2g cornell.asc cornell.g |
| 00:19.47 | Twingy | ../src/conv/asc2g cray.asc cray.g |
| 00:19.49 | Twingy | Floating point exception (core dumped) |
| 00:19.50 | *** join/#brlcad Obscene_CNN (n=DiscoBan@66.15.214.167) | |
| 00:19.51 | Twingy | *** Error code 136 |
| 00:19.53 | Twingy | Floating point exception (core dumped) |
| 00:19.55 | Twingy | *** Error code 136 |
| 00:19.57 | Twingy | Floating point exception (core dumped) |
| 00:20.03 | Twingy | *** Error code 136 |
| 00:20.05 | Twingy | Floating point exception (core dumped) |
| 00:20.07 | Twingy | *** Error code 136 |
| 00:20.10 | Twingy | Floating point exception (core dumped) |
| 00:20.12 | Twingy | *** Error code 136 |
| 00:20.15 | Twingy | 5 errors |
| 00:20.17 | Twingy | *** Error code 1 |
| 00:20.19 | Twingy | 1 error |
| 00:32.35 | brlcad | nice |
| 00:32.50 | brlcad | this the new box? |
| 01:10.32 | Twingy | yah |
| 01:10.37 | Twingy | any clue what that's about? |
| 01:13.17 | silvap_ | i love coughing up blood |
| 01:13.18 | brlcad | i'd need a debugger |
| 01:13.24 | silvap_ | so did lisa fire me yet? |
| 01:13.29 | brlcad | silvap_: taste like chicken? |
| 01:13.45 | Twingy | silva, she only fires employees that cough up blood |
| 01:14.10 | brlcad | silvap_: no, but there are 15 cuban refugees in your office now |
| 01:14.11 | Twingy | so... it's not mono? |
| 01:14.24 | silvap_ | apparently not |
| 01:14.39 | silvap_ | i was taken down by unknown bacteria |
| 01:14.41 | Twingy | you been taste testing anthrax again? |
| 01:14.49 | Twingy | hrm, ed is taking antibiotics |
| 01:15.13 | brlcad | gotta stop putting things in your mouth that aren't food :) |
| 01:15.13 | Twingy | wonder if the two are linked |
| 01:15.20 | silvap_ | im on antibiotics too |
| 01:15.26 | silvap_ | two in fact |
| 01:15.28 | Twingy | maybe it was that cheese I gave you |
| 01:15.35 | silvap_ | it was |
| 01:15.45 | silvap_ | in fact ull be hearing from my lawyer soon |
| 01:15.46 | Twingy | then my plan worked |
| 01:15.55 | brlcad | probably 3 year old pieces of toast falling out of the toaster |
| 01:16.01 | Twingy | hehehe |
| 01:16.13 | Twingy | old than the animal crackers |
| 01:16.16 | Twingy | *older |
| 01:16.37 | Twingy | where is libwdb |
| 01:16.38 | silvap_ | i plan on coming to the office tomorrow |
| 01:16.44 | Twingy | you've got a wall now |
| 01:16.49 | Twingy | so we can quarantine your ass |
| 01:16.54 | silvap_ | woot |
| 01:16.59 | silvap_ | is there a door? |
| 01:17.09 | Twingy | that's what the trash bags are for |
| 01:17.11 | brlcad | src/libwdb |
| 01:18.01 | Twingy | hrm |
| 01:18.09 | Twingy | maybe I'll comment out db stuff |
| 01:18.09 | silvap_ | brlcad, create the project yet? |
| 01:18.20 | silvap_ | ive got plans for a n level decision tree |
| 01:18.24 | silvap_ | an* |
| 01:18.25 | brlcad | Twingy: I've seen that before, a long time ago |
| 01:18.47 | Twingy | hrm |
| 01:18.50 | brlcad | it that fails, rt aint gonna work |
| 01:19.00 | Twingy | I know, I just wanna compile g-adrt |
| 01:19.04 | brlcad | i think it's a machine.h define |
| 01:19.13 | brlcad | so cd src/conv and make g-adrt |
| 01:19.25 | Twingy | ah nm, just got it installed |
| 01:20.09 | brlcad | silvap_: i aint forgotten |
| 01:20.09 | Twingy | ah grumble cakes |
| 01:20.11 | brlcad | but I aint done it yet either |
| 01:20.25 | brlcad | i was offline for like 5 days |
| 01:21.14 | Twingy | is lee still making weird noises? |
| 01:22.08 | Twingy | prasad, $20 and I'll make you an account on this opteron machine |
| 01:22.16 | Twingy | :) |
| 02:32.19 | Twingy | 1.5 million rays / sec on 1 core |
| 02:33.59 | Twingy | so effectively 6M/sec on a single box |
| 02:34.27 | Twingy | hrm, upwards of 30fps @ 512x384, not bad |
| 02:34.55 | Twingy | should be 30-40 fps @ 640x480 on both |
| 14:21.33 | *** join/#brlcad ibot (i=ibot@pdpc/supporter/active/TimRiker/bot/apt) | |
| 14:21.33 | *** topic/#brlcad is http://brlcad.org/ || BRL-CAD is now Open Source! || Release 7.6.0 is now being prepared | |
| 15:12.07 | CIA-5 | BRL-CAD: 03lbutler * 10brlcad/src/gtools/ (g_qa.1 g_qa.c): Fixes for overlap-only calculations. Improvements to the man page. |
| 15:27.52 | CIA-5 | BRL-CAD: 03bob1961 07bobWinPort * 10brlcad/src/libpkg/pkg.c: Mods for windows port |
| 15:30.55 | CIA-5 | BRL-CAD: 03bob1961 07bobWinPort * 10brlcad/src/libfb/ (fb_generic.c fb_log.c if_ogl_win32.c if_remote.c tcl.c): Mods for windows port |
| 15:45.47 | CIA-5 | BRL-CAD: 03bob1961 07bobWinPort * 10brlcad/src/libdm/ (clip.c dm-ogl_win.c dm_obj.c): Mods for windows port |
| 15:49.23 | CIA-5 | BRL-CAD: 03bob1961 07bobWinPort * 10brlcad/src/mged/utility1.c: bu_opt??? declared in bu.h |
| 15:51.37 | CIA-5 | BRL-CAD: 03bob1961 07bobWinPort * 10brlcad/src/mged/rtif.c: Mods to use nirt from librt |
| 15:56.34 | CIA-5 | BRL-CAD: 03bob1961 07bobWinPort * 10brlcad/src/mged/ (facedef.c inside.c edarb.c edsol.c): Mods to use rt_arb_calc_planes from librt |
| 15:58.11 | CIA-5 | BRL-CAD: 03bob1961 07bobWinPort * 10brlcad/src/mged/rect.c: fb_refresh declared in fb.h |
| 16:02.29 | CIA-5 | BRL-CAD: 03bob1961 07bobWinPort * 10brlcad/src/mged/mater.c: rt_material_head and rt_insert_color are declared in mater.h |
| 16:10.22 | CIA-5 | BRL-CAD: 03bob1961 07bobWinPort * 10brlcad/src/mged/ (11 files): Mods for windows port |
| 16:12.22 | CIA-5 | BRL-CAD: 03bob1961 07bobWinPort * 10brlcad/include/ (8 files): Mods for windows port |
| 16:15.28 | CIA-5 | BRL-CAD: 03lbutler * 10brlcad/src/gtools/g_qa.1: Documented -N option but not so much that people will start to use it. |
| 16:17.09 | CIA-5 | BRL-CAD: 03bob1961 07bobWinPort * 10brlcad/src/other/incrTcl/ (itcl/generic/itcl_cmds.c itk/generic/itk_cmds.c): Mods to split large strings into smaller ones for compilation, then concat at runtime |
| 16:19.04 | CIA-5 | BRL-CAD: 03bob1961 07bobWinPort * 10brlcad/src/tclscripts/lib/ (QuadDisplay.tcl Display.tcl): Add methods for rtarea and rtweight |
| 16:19.51 | CIA-5 | BRL-CAD: 03bob1961 07bobWinPort * 10brlcad/src/tclscripts/lib/Drawable.tcl: Minor mods |
| 16:21.51 | CIA-5 | BRL-CAD: 03bob1961 07bobWinPort * 10brlcad/src/other/libtk/win/tkWinMenu.c: Add code for double-bar |
| 16:23.51 | CIA-5 | BRL-CAD: 03bob1961 07bobWinPort * 10brlcad/src/ (22 files in 8 dirs): Mods for windows port |
| 16:24.51 | *** join/#brlcad IngMan (n=a8b0a00f@bz.bzflag.bz) | |
| 16:25.06 | IngMan | Hi |
| 16:25.12 | IngMan | Alguien que hable español |
| 16:29.12 | brlcad | claro |
| 16:29.28 | brlcad | que tal? |
| 16:36.39 | IngMan | lo que pasa es que tengo unas preguntas |
| 16:36.53 | brlcad | ok, dale |
| 16:37.02 | IngMan | listo para dibujar, brlcad es muy bueno, no necesito mas |
| 16:37.31 | brlcad | glad to hear it |
| 16:37.39 | brlcad | gracias |
| 16:37.46 | brlcad | pues que es la pregunta ;) |
| 16:38.05 | IngMan | el problema es cuando trato de usarlo para diseño, cosas como volumen, linea media, distancias y esas cosas no se como usarlas, o es que no tiene esas herramientas |
| 16:39.35 | IngMan | hay algun comando que me devuelva el volumen del solido que estoy trabajando |
| 16:40.15 | brlcad | si |
| 16:40.20 | brlcad | rtweight |
| 16:40.20 | IngMan | cual |
| 16:40.39 | IngMan | y para acotar que usas usted |
| 16:40.46 | brlcad | oo, el volumen |
| 16:41.52 | IngMan | longitudes |
| 16:43.26 | brlcad | ah, bueno, depende |
| 16:43.54 | brlcad | hay varias comandos |
| 16:43.55 | IngMan | ??? |
| 16:44.21 | brlcad | nirt y rtshot para empezar |
| 16:45.23 | brlcad | tiran un rayo y dan informacion de los objectos |
| 16:46.25 | brlcad | rtweight calcula el peso, el centro de figura, y el volumen |
| 16:47.17 | brlcad | tienes que usar un .density tabla de la densidad |
| 16:47.58 | IngMan | y para hacer planos con vistas y dodo eso, como lo acoto |
| 16:50.44 | brlcad | aqui es un .density para comenzar http://ftp.brlcad.org/tmp/.density |
| 16:51.19 | CIA-5 | BRL-CAD: 03bob1961 07bobWinPort * 10brlcad/misc/win32-msvc6/asc2g/asc2g.dsp: Initial check-in |
| 16:51.37 | IngMan | donde encuentro mas informacion de esto |
| 16:53.15 | brlcad | rtedge produces imagenes con lineas al borde |
| 16:53.30 | brlcad | hay manpages por todo los comandos |
| 16:53.36 | brlcad | man rtweight |
| 16:53.43 | brlcad | man rtedge |
| 16:54.06 | brlcad | (en ingles, por supuesto..) |
| 16:54.30 | IngMan | por lo menos cuando lo leo lo enrtiendo jaja |
| 16:54.38 | brlcad | (traducciones are very welcome!) :) |
| 16:54.52 | brlcad | jeje |
| 16:55.04 | IngMan | deberiamos hacer un proyectico de traducciones |
| 16:55.23 | CIA-5 | BRL-CAD: 03bob1961 07bobWinPort * 10brlcad/misc/win32-msvc6/g2asc/g2asc.dsp: Initial check-in |
| 16:55.29 | IngMan | y traduccir los documentos o hacer unos basados en esos |
| 16:55.50 | brlcad | si.. he quierdo hacer un distribucion en español |
| 16:56.12 | IngMan | hagamosle, |
| 16:56.20 | brlcad | :) |
| 16:57.05 | IngMan | seguro, regalame tu mail y estamos en contacto |
| 16:57.14 | IngMan | y la sacamos |
| 16:57.18 | brlcad | sabes programar? |
| 16:57.23 | IngMan | si |
| 16:57.27 | brlcad | que bien :) |
| 16:58.38 | brlcad | lo mande en privado |
| 16:59.07 | IngMan | pero no llego |
| 16:59.27 | brlcad | debes tener un "tab" que dice brlcad |
| 16:59.37 | brlcad | en rojo quiza |
| 16:59.56 | CIA-5 | BRL-CAD: 03bob1961 07bobWinPort * 10brlcad/misc/win32-msvc6/tclsh/tclsh.dsp: Initial check-in |
| 17:00.15 | IngMan | dale de nuevo |
| 17:01.32 | brlcad | lo tienes? |
| 17:01.45 | CIA-5 | BRL-CAD: 03bob1961 07bobWinPort * 10brlcad/misc/win32-msvc6/tkimg/tkimg.dsp: Initial check-in |
| 17:01.55 | IngMan | No yo te envie el mio, No ???? |
| 17:02.02 | brlcad | nope :) |
| 17:02.20 | brlcad | oooh... |
| 17:02.21 | brlcad | 13:00 -!- Private messages from unregistered users are currently blocked due to spam problems, but you can always message a |
| 17:02.24 | brlcad | <PROTECTED> |
| 17:02.31 | brlcad | el nuevo limitacion.. |
| 17:02.38 | brlcad | perate |
| 17:02.49 | *** mode/#brlcad [+o brlcad] by ChanServ | |
| 17:05.18 | IngMan | No me llega nada |
| 17:05.24 | brlcad | heh |
| 17:05.25 | brlcad | ta bien |
| 17:05.27 | brlcad | morrison |
| 17:05.32 | brlcad | at brlcad |
| 17:05.34 | brlcad | dot org ;) |
| 17:13.09 | CIA-5 | BRL-CAD: 03bob1961 07bobWinPort * 10brlcad/misc/win32-msvc6/librt/librt.dsp: Initial check-in |
| 17:14.08 | IngMan | listo |
| 17:14.16 | IngMan | que quieres tu con el manual |
| 17:18.30 | CIA-5 | BRL-CAD: 03bob1961 07bobWinPort * 10brlcad/misc/win32-msvc6/ (34 files in 34 dirs): Initial check-in |
| 17:21.13 | brlcad | bueno, lo que piensa sera mas util.. |
| 17:22.05 | brlcad | me imagino que traduciendo un comando o mged o los documentos (como los que estan en http://brlcad.org) |
| 17:24.54 | IngMan | tu eres ingeniero |
| 17:26.27 | IngMan | o aque te dedicas |
| 17:27.15 | brlcad | :) |
| 17:27.35 | CIA-5 | BRL-CAD: 03bob1961 07bobWinPort * 10brlcad/misc/win32-msvc6/wish/wish.dsp: Initial check-in |
| 17:27.48 | IngMan | espara saber en que estamos deacuerdo y en que no |
| 17:28.10 | brlcad | depende en lo que te interesa mas.. pienso que los documentos serán má util para empezar |
| 17:28.41 | IngMan | si pero me parece que esos ejemplos no son muy de ingerieria |
| 17:28.56 | IngMan | mas bien parecen de diseño grafico o algo asi |
| 17:29.25 | brlcad | that would work too |
| 17:29.34 | CIA-5 | BRL-CAD: 03bob1961 07bobWinPort * 10brlcad/misc/win32-msvc6/zlibtcl/zlibtcl.dsp: Initial check-in |
| 17:29.53 | brlcad | si, ejemplos de uso para casos especificos |
| 17:30.02 | IngMan | mas de ingerieria |
| 17:30.09 | brlcad | quieres hacer eso.. haga eso |
| 17:30.29 | IngMan | pero se supone que lo vamos hacer entre los 2 o no |
| 17:31.11 | brlcad | si, me interesa .. great idea |
| 17:31.51 | IngMan | Ok |
| 17:32.06 | IngMan | que ideas tienes tu |
| 17:32.13 | brlcad | solo no lo he puesto una tanda de atencion ni pensamiento todavia en la mejor manera de empezar |
| 17:32.46 | brlcad | there's just so much that could be done, all good |
| 17:33.26 | CIA-5 | BRL-CAD: 03bob1961 07bobWinPort * 10brlcad/misc/win32-msvc6/tkstub/tkstub.dsp: Initial check-in |
| 17:34.17 | IngMan | Y tu que haces |
| 17:34.33 | CIA-5 | BRL-CAD: 03bob1961 07bobWinPort * 10brlcad/misc/win32-msvc6/tkimgpng/tkimgpng.dsp: Initial check-in |
| 17:34.51 | IngMan | A que te dedics |
| 17:36.15 | brlcad | soy el lider del open source proyecto |
| 17:36.44 | IngMan | Que bien |
| 17:36.54 | brlcad | "el arquitecto de la base" ? |
| 17:37.07 | IngMan | pero me refiero a que profesion tienes |
| 17:37.57 | Twingy_ | lavar los platinos |
| 17:38.17 | IngMan | yo estudio ingenieria mecanica, y por eso es que te preguntaba las otras herramientas |
| 17:38.28 | brlcad | arcquitecto de software, programmacion, desenyo |
| 17:38.56 | Twingy_ | lavar los platinos |
| 17:39.47 | brlcad | project management and planning tambien |
| 17:39.59 | IngMan | por lo que estudio mecanica es que te decia del enfoque que le queremos dar |
| 17:40.01 | Twingy_ | natalie imbrugllibaidhgaia |
| 17:40.26 | silvap_ | hasbeen |
| 17:40.51 | Twingy_ | prasad, aka dances with pigs, shouldn't you be coding muves and not wasting time on chat channels? |
| 17:41.00 | silvap_ | john kicked me out |
| 17:41.02 | silvap_ | so im home |
| 17:41.09 | CIA-5 | BRL-CAD: 03bob1961 07bobWinPort * 10brlcad/misc/win32-msvc6/brlcad/.cvsignore: Initial check-in |
| 17:41.15 | Twingy_ | ah, in that case, carry on |
| 17:41.34 | brlcad | IngMan: la programa fue construido para ingenieria mecanica y deseño de vehiculos militares |
| 17:42.22 | Twingy_ | hrm, I'm going to benchmark cas2.5@400 vs cas2@333 soon |
| 17:43.06 | IngMan | si eso lo sabia |
| 17:43.11 | Twingy_ | I have no soda left :( |
| 17:43.20 | IngMan | pero no encontraba las herramientas que te decia |
| 17:43.45 | brlcad | no encontraste rtweight/rtarea/rtedge? |
| 17:43.53 | Twingy_ | I think that bulgogi gave me heart burn |
| 17:43.57 | brlcad | no estan en mged, estan fuera de mged |
| 17:44.10 | Twingy_ | MJED |
| 17:44.17 | Twingy_ | :D |
| 17:44.33 | brlcad | multi juice extrapolation device |
| 17:45.09 | Twingy_ | multiplexing joint eggnog detector |
| 17:46.07 | IngMan | no he probado por que no estoy en la casa |
| 17:46.30 | Twingy_ | su casa es mi casa |
| 17:47.30 | brlcad | IngMan: ahh, ta bien |
| 17:47.45 | Twingy_ | my computer is posessed |
| 17:47.59 | brlcad | ignora el mono alli que dice tonterias ;) |
| 17:48.17 | IngMan | o leo |
| 17:48.18 | IngMan | si eso veo |
| 17:49.10 | Twingy_ | bon jovi is the gayest cowboy ever |
| 17:50.08 | silvap_ | that must be one heck of a heartburn |
| 17:51.29 | Twingy_ | yah |
| 17:51.38 | Twingy_ | the soda helped alot |
| 17:52.02 | IngMan | Te envio un mail con las ideas que tengo para el manual |
| 17:52.12 | brlcad | IngMan: he pensado un poco en lo que necesitariamos para producir mged en varias lenguas, lo más facil sera tener un archivo de las palabras/frases para cada lengu. tendriamos que cambiar como mged usa titulos y labels, un poco complicado |
| 17:52.31 | IngMan | y hay vemos que hacemos |
| 17:52.46 | brlcad | o pudieramos empezar con los herramientas primero que mged usa como comandos |
| 17:53.01 | IngMan | y cuantas personas estan trabajando contigo |
| 17:54.03 | IngMan | en ese proyecto |
| 17:54.29 | brlcad | hmm.. |
| 17:55.49 | brlcad | hay como 8-10 developers en total y como 3-4 participando activamente en cualquier mes |
| 17:56.24 | brlcad | como vente involucrada de vez en cuando |
| 17:57.05 | IngMan | yo no se si sea tan buen programador como para entrar en el "selecto grupo", pero tengo ganas y muchas ideas |
| 17:57.48 | brlcad | ganas y ideas son todo lo que se necesita, lo demas se puede aprender ;) |
| 17:58.06 | IngMan | listo |
| 17:58.14 | brlcad | tampoco tendrias que ser un programador |
| 17:58.32 | IngMan | te mando un mail para ponernos de acuerdo como hacemos el manual |
| 17:58.40 | brlcad | siempre hay mucho que hacer ;) |
| 17:59.06 | brlcad | ta bien |
| 17:59.32 | IngMan | y que programas PROPIETARIOS sabes usr |
| 18:00.39 | brlcad | pro-engineer y unigraphics principalmente |
| 18:01.13 | IngMan | y de elementos finitos que usas |
| 18:02.44 | brlcad | no he usado mucho para elementos finitos aunque tengo acceso a casi todas |
| 18:02.57 | IngMan | y libres que usas |
| 18:03.04 | IngMan | has probado Z88 o Impact |
| 18:03.12 | IngMan | son bien interesantes |
| 18:03.22 | IngMan | Calculix |
| 18:04.13 | brlcad | el año que viene tiene financiamiento asignado al analisis de elementos finitos |
| 18:04.39 | IngMan | BRLCAD |
| 18:05.16 | brlcad | si |
| 18:05.34 | IngMan | que bueno eso me anima mas a trabajar con ustedes |
| 18:06.06 | IngMan | Como es tu nombtre |
| 18:06.07 | brlcad | no el analisis directamente quiza, pero al conversion y creacion de los meshes |
| 18:06.22 | brlcad | por lo menos |
| 18:06.30 | IngMan | si para que hacer cosas que ya estan hechas |
| 18:06.53 | CIA-5 | BRL-CAD: 03bob1961 07bobWinPort * 10brlcad/misc/win32-msvc6/asc2g/.cvsignore: Initial check-in |
| 18:06.55 | brlcad | exacto |
| 18:07.13 | IngMan | Como es tu nombre |
| 18:07.29 | brlcad | Me llamo Sean |
| 18:07.37 | brlcad | y el tuyo? |
| 18:07.53 | IngMan | Mucho gusto Sean, yo me llamo Manuel |
| 18:08.02 | brlcad | tambien |
| 18:08.27 | IngMan | te mando un mail con las ideas para el manual |
| 18:10.18 | IngMan | Listo quedamos asi, ya tengo que irmen |
| 18:10.29 | IngMan | Chao, Bye |
| 18:10.35 | brlcad | esta bien, ha sido un placer mio |
| 18:10.51 | IngMan | igual for me |
| 18:10.56 | brlcad | ciao |
| 18:22.51 | CIA-5 | BRL-CAD: 03bob1961 07bobWinPort * 10brlcad/misc/win32-msvc6/all/.cvsignore: Initial check-in |
| 18:35.19 | CIA-5 | BRL-CAD: 03bob1961 07bobWinPort * 10brlcad/misc/win32-msvc6/ (40 files in 40 dirs): Initial check-in |
| 18:36.53 | *** join/#brlcad brad2901 (i=brad@unaffiliated/brad2901) | |
| 18:37.01 | *** part/#brlcad brad2901 (i=brad@unaffiliated/brad2901) | |
| 19:39.18 | CIA-5 | BRL-CAD: 03bob1961 07bobWinPort * 10brlcad/src/other/blt/ (374 files in 17 dirs): Initial check-in |
| 20:18.00 | CIA-5 | BRL-CAD: 03lbutler * 10brlcad/src/gtools/ (g_qa.1 g_qa.c): Stop refining grid if overlaps have been found. |
| 20:49.59 | *** join/#brlcad cad303 (n=51d04ab0@bz.bzflag.bz) | |
| 20:51.06 | CIA-5 | BRL-CAD: 03bob1961 07bobWinPort * 10brlcad/src/other/tkimg/ (39 files in 5 dirs): Initial check-in |
| 20:54.30 | CIA-5 | BRL-CAD: 03bob1961 07bobWinPort * 10brlcad/src/other/tkimg/base/ (4 files in 2 dirs): Initial check-in |
| 21:00.08 | CIA-5 | BRL-CAD: 03bob1961 07bobWinPort * 10brlcad/misc/win32-msvc6/zlibtcl/zlibtcl.dsp: Not needed |
| 21:02.24 | CIA-5 | BRL-CAD: 03bob1961 07bobWinPort * 10brlcad/misc/win32-msvc6/zlibtcl/.cvsignore: No needed |
| 21:04.13 | CIA-5 | BRL-CAD: 03bob1961 07bobWinPort * 10brlcad/misc/win32-msvc6/pngtcl/ (.cvsignore pngtcl.dsp): Not needed |
| 21:07.00 | CIA-5 | BRL-CAD: 03bob1961 07bobWinPort * 10brlcad/misc/win32-msvc6/brlcad/brlcad.dsw: Remove unneeded projects |
| 21:08.58 | CIA-5 | BRL-CAD: 03bob1961 07bobWinPort * 10brlcad/misc/win32-msvc6/tkimgpng/tkimgpng.dsp: Mods to use libz and libpng |
| 21:11.16 | CIA-5 | BRL-CAD: 03bob1961 07bobWinPort * 10brlcad/misc/win32-msvc6/ (rt/rt.dsp rtcheck/rtcheck.dsp rtedge/rtedge.dsp): Minor mods |
| 21:17.17 | CIA-5 | BRL-CAD: 03bob1961 07bobWinPort * 10brlcad/src/tclscripts/archer/ (204 files in 5 dirs): Initial check-in |
| 21:32.37 | *** join/#brlcad Obscene_CNN (n=DiscoBan@66.15.214.167) | |
| 21:59.14 | CIA-5 | BRL-CAD: 03twingy * 10brlcad/src/adrt/ (5 files in 2 dirs): |
| 21:59.15 | CIA-5 | BRL-CAD: adrt now uses a mesh map, no properties embedded in adrt file. Transformation matrices being applied in unpack |
| 21:59.15 | CIA-5 | BRL-CAD: again. |
| 22:23.51 | CIA-5 | BRL-CAD: 03lbutler * 10brlcad/ (include/config_win.h HACKING NEWS configure.ac): Release 7.6.0 Wahoo! |
| 22:28.01 | CIA-5 | BRL-CAD: 03lbutler * 10brlcad/ (HACKING NEWS ChangeLog): Release 7.6.0 Wahoo!!! |
| 23:48.18 | Twingy | grumble smacks |
| 23:51.22 | *** join/#brlcad testtest (n=5253e918@bz.bzflag.bz) | |
| 23:51.39 | *** part/#brlcad testtest (n=5253e918@bz.bzflag.bz) | |
| 23:58.56 | *** join/#brlcad cad308 (n=5253e918@bz.bzflag.bz) | |