| 00:37.54 | archivist | our computers do most of the lurking for us |
| 01:09.52 | ``Erik | *autolurk* |
| 01:26.51 | *** join/#brlcad tegtmeye (n=tegtmeye@pool-70-17-225-27.balt.east.verizon.net) | |
| 01:29.24 | ``Erik | argle blargle nawdle zous |
| 01:48.00 | pra5ad | what he said |
| 01:50.54 | justin_ | mmm, only 3 pieces of drywall left |
| 01:51.18 | justin_ | the disturbing part is the gym is going to require 3x this work |
| 01:56.50 | tegtmeye | what is a gym for? never heard of one before |
| 01:57.03 | tegtmeye | <- munching on a twinky |
| 01:58.52 | ``Erik | hah |
| 01:59.44 | justin_ | bah, I have no junk food |
| 02:01.13 | justin_ | I think I will start installing drop ceiling on thursday |
| 02:01.47 | tegtmeye | mmmmm calcium sulfate (in best Homer voice) |
| 02:02.12 | justin_ | I wish my promotion would hurry up and go through, I want to bring in my homer slippers |
| 02:03.23 | justin_ | with liquid air foot cooling system |
| 02:03.49 | tegtmeye | lol |
| 02:04.36 | tegtmeye | I'll get you the water powered pecking bird for your keyboard as a promotion gift |
| 02:04.59 | justin_ | ooh |
| 02:05.37 | justin_ | if I get 2, I'd get twice the work done |
| 02:06.47 | justin_ | mike, when we make liquid air, we can be cool and overclock our processors to 10 gigglehurts |
| 02:07.02 | justin_ | and watch them blow a hole through the building |
| 02:07.20 | tegtmeye | as long as i can get a really big exhaust pipe for my computer |
| 02:07.26 | pra5ad | b238? halleluah! |
| 02:07.38 | justin_ | I got dibs on a big tail fin |
| 02:07.52 | justin_ | (with racing stripes) |
| 02:08.00 | tegtmeye | type 'R' |
| 02:08.09 | justin_ | for Riceronni |
| 02:09.18 | justin_ | first thing I do when I become filthy rich, is slap a fin on the trooper, and make it a big R/C car |
| 02:10.18 | justin_ | and uses my ray-tracing engine to target innocent pedestrians to shoot nerf arrows at |
| 02:10.44 | tegtmeye | lol |
| 02:11.18 | tegtmeye | 1 millliion innocent bystanders per sec... |
| 02:11.41 | justin_ | indeed |
| 02:12.04 | justin_ | with SSE instructions I could shoot 4 pedestrians at once! |
| 02:16.16 | justin_ | dried seamonkey's |
| 03:42.35 | justin_ | I need to get me one of them new fangled graphics cards |
| 03:51.01 | *** join/#brlcad Guu (i=guu@myth.gibbscam.com) | |
| 03:52.07 | *** join/#brlcad justin_ (n=justin@pcp0011649600pcs.aberdn01.md.comcast.net) | |
| 05:02.52 | *** join/#brlcad justin_ (n=justin@pcp0011649600pcs.aberdn01.md.comcast.net) | |
| 06:43.22 | CIA-6 | BRL-CAD: 03brlcad * 10brlcad/sh/copyright.sh: |
| 06:43.23 | CIA-6 | BRL-CAD: convert/update the copyright script from a BSD sed using the -E option for |
| 06:43.23 | CIA-6 | BRL-CAD: extended regular expressions (an option which the GNU sed doesn't recognize). |
| 06:43.23 | CIA-6 | BRL-CAD: convert the sed expressions to basic regular expressions instead so it works |
| 06:43.24 | CIA-6 | BRL-CAD: with either without needing to test sed for option support or limiting to one |
| 06:43.25 | CIA-6 | BRL-CAD: versus the other. |
| 06:44.09 | *** join/#brlcad DTRemenak (n=DTRemena@DHCP-170-143.caltech.edu) | |
| 06:46.46 | CIA-6 | BRL-CAD: 03brlcad * 10brlcad/ (1646 files in 72 dirs): update copyright to 2006 |
| 07:26.00 | *** join/#brlcad clock_ (n=clock@84-72-91-16.dclient.hispeed.ch) | |
| 08:37.41 | *** join/#brlcad CIA-13 (i=cia@flapjack.navi.cx) | |
| 08:50.49 | *** join/#brlcad CIA-13 (i=cia@flapjack.navi.cx) | |
| 09:19.20 | *** join/#brlcad clock_ (n=clock@zux221-122-143.adsl.green.ch) | |
| 14:22.32 | *** join/#brlcad MaDrense (n=d53aec0d@bz.bzflag.bz) | |
| 14:23.25 | MaDrense | hi |
| 14:23.41 | MaDrense | can BRL-CAD be used as a C++ modelling kernel ? |
| 14:23.53 | MaDrense | similar to Spatial's ACIS or Open Cascade ? |
| 14:33.37 | brlcad | MaDrense: hello and yes/no |
| 14:34.55 | brlcad | MaDrense: there is a relatively simple API to the geometry services in BRL-CAD |
| 14:36.28 | brlcad | for creating geometry only, there is libwdb (Write DataBase library) which is a set of C functions that create geometry, e.g. mk_sph() to create a sphere |
| 14:37.57 | MaDrense | and does it have csg functions ?! |
| 14:38.06 | MaDrense | do they operate on the mesh ? |
| 15:07.55 | brlcad | er |
| 15:07.58 | brlcad | yes and yes |
| 15:20.31 | *** join/#brlcad Twingy (n=justin@pcp0011649600pcs.aberdn01.md.comcast.net) | |
| 15:58.49 | *** join/#brlcad learner (n=brlcad@pcp0011649376pcs.aberdn01.md.comcast.net) | |
| 15:58.50 | *** mode/#brlcad [+o learner] by ChanServ | |
| 16:10.03 | *** join/#brlcad cad648 (n=43621c7a@bz.bzflag.bz) | |
| 16:11.10 | cad648 | I've been having trouble with IRC. Just want to confirm: was I told days ago Windows release was anticipated "in a few weeks" |
| 16:13.10 | archivist | so why are you asking again |
| 16:15.31 | cad648 | Because I've been having trouble with IRC ... asking into the void (or so it seems). |
| 16:15.55 | cad648 | and because I didn't note down the previous answer |
| 16:20.20 | archivist | well have patience 2-3 weeks is not too long |
| 16:21.20 | cad648 | Thanks ... just wanted to double check and copy to the bosses. |
| 16:50.13 | *** join/#brlcad pier (n=pier@151.56.215.162) | |
| 18:09.53 | brlcad | pier: pong |
| 18:41.04 | *** join/#brlcad pier_ (n=pier@151.56.240.205) | |
| 18:56.35 | *** join/#brlcad pier (n=pier@151.56.222.41) | |
| 19:13.40 | *** join/#brlcad pier_ (n=pier@151.56.217.136) | |
| 19:35.23 | pier | brlcad |
| 19:44.12 | *** join/#brlcad Maloeran (n=maloeran@glvortex.net) [NETSPLIT VICTIM] | |
| 19:45.04 | CIA-13 | BRL-CAD: 03brlcad * 10brlcad/src/archer/ (5 files in 5 dirs): include the files in the distribution |
| 19:46.58 | brlcad | pier: best to just ask/speak :) I'll respond |
| 19:47.53 | pier | ok sorry, it is about the II vol |
| 19:49.04 | pier | I'm running through some problem with html conversion from pdf format |
| 19:49.16 | brlcad | eekage |
| 19:49.21 | brlcad | i can imagine |
| 19:49.27 | brlcad | i wouldn't start with that ;) |
| 19:49.32 | pier | I wanted to preserve the template of the document as well as the figures and so on |
| 19:50.22 | brlcad | how about I provide the document in word format, convert from that to html first |
| 19:50.30 | pier | the program I've found doesn't want to compile and all I've got is pure txt |
| 19:50.50 | pier | that woud b great |
| 19:51.30 | brlcad | let me see if I can find it |
| 19:51.57 | pier | ok |
| 20:01.56 | brlcad | found the files, but waiting from another guy to see which file is the "latest" |
| 20:02.36 | pier | ok |
| 20:23.42 | pier | si, la linguetta americana, a mezza luna anche detta woodruff key |
| 20:58.36 | ``Erik | (yeah, it was the mime type) |
| 21:04.05 | *** join/#brlcad clock_ (n=clock@84-72-63-174.dclient.hispeed.ch) | |
| 21:05.23 | CIA-13 | BRL-CAD: 03brlcad * 10brlcad/doc/html/manuals/ (Makefile.am archer/Makefile.am): include missing stuff in the distribution, add the Makefile.defs for fast builds |
| 21:10.03 | pier | ? |
| 21:10.06 | brlcad | at least how la linguetta americana has anything to do with woodruff keys :) |
| 21:10.30 | brlcad | found the file |
| 21:10.31 | pier | sorry typed into the wrong window :( |
| 21:10.34 | brlcad | i know :) |
| 21:10.37 | pier | ok |
| 21:11.35 | pier | how can I get hold of it? :) |
| 21:15.09 | brlcad | exporting, give me a couple minutes |
| 21:16.20 | pier | take it easy |
| 21:26.36 | brlcad | okay, good to go |
| 22:11.20 | *** part/#brlcad pier (n=pier@151.56.217.136) | |
| 22:32.13 | ``Erik | brlcad, 7.6.8 ? |
| 22:41.55 | brlcad | ``Erik: yeah |
| 22:42.04 | brlcad | debating it today |
| 22:42.37 | brlcad | i wasn't going to make a jan release, letting Dec/Jan be our one "downtime" longer iteration |
| 22:51.47 | brlcad | but then 'someone' complained, so I've been thinking how to do it without stopping what i'm already doing |
| 23:01.10 | ``Erik | heh, 'someone'? o.O |