| 00:12.53 | *** part/#brlcad bobbens (n=bobbens@84.16.237.134) | |
| 00:27.27 | IriX64 | dinner had me for lunch ;) |
| 00:28.28 | IriX64 | mmm +e = eavesdrop mode ? :) |
| 00:30.20 | IriX64 | question... when you enable-almost-everything does with-x still need to be specified (goof try it and see but im lazy) |
| 00:31.01 | CIA-5 | BRL-CAD: 03brlcad * 10brlcad/autogen.sh: gah, search the configure.ac file instead of just sitting there idle |
| 00:33.30 | ``Erik | if X is in a 'normal' place, it should just be included... if it's in a weird place, it needs to be specified |
| 00:33.54 | ``Erik | <-- has a few machines with /usr/Xorg to intentionally break stuff that assumes /usr/X11R6 /usr/X11 /usr/X |
| 00:34.07 | IriX64 | so even with-x isn't needed? |
| 00:34.23 | IriX64 | got it thanks. |
| 00:39.38 | IriX64 | doh X is already up. |
| 00:39.47 | CIA-5 | BRL-CAD: 03brlcad * 10brlcad/autogen.sh: missing var init when printing summary of invalid macros in use |
| 00:41.13 | IriX64 | just out of curiosity, how many ppl have managed to get brlcad to compile on a cygwin installation? |
| 00:43.07 | IriX64 | I sent ValarQ some screen shots of my attempts. :) |
| 00:44.14 | ``Erik | not a clue, there are msvc 6 and 7 things |
| 00:44.39 | IriX64 | man msvc does not apply here. |
| 00:45.01 | IriX64 | visual c on cygwin? :) |
| 00:45.28 | dtidrow | cygwin ought to be using the makefiless, I would imagine |
| 00:45.49 | IriX64 | started from autogen compiling now. |
| 00:46.38 | IriX64 | all the nurb stuff going by. |
| 00:47.48 | IriX64 | mc |
| 00:49.12 | IriX64 | if winsock.h is defined it bombs till i comment out that define, multiple defintions errors |
| 01:09.22 | brlcad | IriX64: i've compiled (fully) and run under cygwin several times |
| 01:09.56 | brlcad | sometimes requires a few patches, sometimes it's been clean .. depends on the state of things |
| 01:11.51 | brlcad | couldn't get mged tk interface to come up due to some tk run-time problems (wrong compilation flags), but it compiles and classic runs fine |
| 01:38.03 | IriX64 | 24 minutes 46 seconds compile time |
| 01:38.55 | IriX64 | just about installed the channel :) |
| 01:39.59 | IriX64 | usually compiles clean here (cept for that winsock thing) and runs fine. |
| 01:40.44 | IriX64 | importF4gSection.c tho has some functions that are defined already in fast4g |
| 01:43.34 | Maloeran | Hey IriX64, we haven't seen you around for a while |
| 01:44.37 | Maloeran | I never realized Mark was rewording my progress reports, "too technical" apparently |
| 01:50.31 | ``Erik | 'progress reports' are for nontechnical people to say "oh, cool, ti's all good" or "ohs noes, do we need to find him some help?" |
| 01:56.56 | IriX64 | Maloeran: been busy.. |
| 01:58.25 | Maloeran | *nods* I thought it was mostly read by you, Lee, Mark |
| 01:58.36 | IriX64 | well, it's up now what do I do with it :) |
| 02:05.40 | louipc | hmm none of the three sites listed for URToolkit sources work |
| 04:47.51 | Maloeran | Ah, no big deal Erik |
| 04:47.57 | Maloeran | Mark : "I needed to reword progress report since management didn't understand most of what was in it :). Please review my update (attached) [...]" |
| 07:09.32 | brlcad | mm |
| 08:00.03 | CIA-5 | BRL-CAD: 03brlcad * 10brlcad/src/tclscripts/archer/pkgIndex.tcl: force specification of the Archer package, even though there's a processing error related to env(ARCHER_HOME) that still has to be fixed. this issue was noticed and fixed by Yugami - marcbritten, sf patch #1612642. |
| 08:13.42 | *** join/#brlcad elderrr (n=usr@89.36.21.119) | |
| 08:13.56 | *** part/#brlcad elderrr (n=usr@89.36.21.119) | |
| 08:20.58 | CIA-5 | BRL-CAD: 03brlcad * 10brlcad/AUTHORS: |
| 08:20.58 | CIA-5 | BRL-CAD: noticed that src/tclscripts/bgerror.tcl is documented to have been written by |
| 08:20.58 | CIA-5 | BRL-CAD: Rick Garriques, Jr. so credit him accordingly. although initially written in |
| 08:20.58 | CIA-5 | BRL-CAD: 2000, the file was added (by bob) as part of the windows port effort. |
| 08:22.54 | CIA-5 | BRL-CAD: 03brlcad * 10brlcad/src/tclscripts/archer/Archer.tcl: |
| 08:22.54 | CIA-5 | BRL-CAD: env(ARCHER_HOME) needs to get set to something even if the set in the catch |
| 08:22.54 | CIA-5 | BRL-CAD: statement fails in order for a pkgIndex.tcl to have the appropriate package |
| 08:22.54 | CIA-5 | BRL-CAD: ifneeded generated. it was failing because argv0 is not necessarily set. |
| 08:47.59 | *** join/#brlcad clock_ (i=clock@84-72-63-61.dclient.hispeed.ch) | |
| 08:53.41 | *** join/#brlcad clock__ (i=clock@84-72-63-61.dclient.hispeed.ch) | |
| 08:54.32 | clock__ | brlcad: when I do some editing and then type "reset", it resets only the active pane |
| 08:54.42 | clock__ | When I select reset from the menu it resets all of them |
| 08:54.44 | clock__ | Is this a bug? |
| 08:55.15 | brlcad | not really |
| 08:55.23 | brlcad | it is inconsistent, but expected |
| 08:55.42 | brlcad | commands are (almost entirely?) written to only apply to the current pane |
| 08:55.52 | brlcad | menu options are a mix |
| 08:55.59 | brlcad | depending on the checkbox |
| 08:57.05 | brlcad | the commands should/could be modified to respect the "apply to all panes" checkbox, but that would be a new improvement |
| 09:20.44 | CIA-5 | BRL-CAD: 03brlcad * 10brlcad/AUTHORS: f. hartley |
| 10:48.50 | brlcad | mm.. breakfast |
| 11:22.59 | clock__ | hartley is it the guy who invented the hartley oscillator? |
| 11:26.21 | brlcad | nah, he was a summer student that work on the initial code conversion from k&r syntax to ansi |
| 11:28.44 | archivist | hartley oscillator goes way to valve(tube) days |
| 11:29.13 | archivist | way back |
| 11:38.18 | *** join/#brlcad zapp (n=zap@pool-72-64-253-55.tampfl.fios.verizon.net) | |
| 12:44.08 | *** join/#brlcad docelic (n=docelic@212.91.112.86) | |
| 13:20.28 | archivist | It was invented by Ralph Hartley, who filed for a patent on June 1, 1915 and was awarded patent number 1,356,763 on October 26, 1920. |
| 13:20.41 | archivist | way way way back |
| 13:32.14 | clock__ | Who got the patent #1, when and for what? For the wheel? For the fire? |
| 13:32.26 | clock__ | For sex? |
| 13:32.51 | clock__ | Method and apparatus for automated procreation in mammal species "Homo Sapiens" in extralaboratory conditions |
| 14:44.35 | *** join/#brlcad brlcad (n=sean@pdpc/supporter/silver/brlcad) | |
| 14:44.35 | *** join/#brlcad deltazap (n=zap@pool-72-64-253-55.tampfl.fios.verizon.net) [NETSPLIT VICTIM] | |
| 14:44.35 | *** join/#brlcad SWPadnos (n=Me@dsl245.esjtvtli.sover.net) [NETSPLIT VICTIM] | |
| 14:44.36 | *** join/#brlcad ``Erik (i=erik@c-69-250-155-85.hsd1.md.comcast.net) [NETSPLIT VICTIM] | |
| 14:44.36 | *** join/#brlcad b0ef (n=b0ef@084202024060.customer.alfanett.no) [NETSPLIT VICTIM] | |
| 14:44.36 | *** join/#brlcad CIA-5 (i=cia@cia.navi.cx) | |
| 14:44.36 | *** mode/#brlcad [+o brlcad] by irc.freenode.net | |
| 14:46.54 | *** join/#brlcad bjorkBSD (n=bjork@ip70-178-168-191.ks.ks.cox.net) [NETSPLIT VICTIM] | |
| 14:46.54 | *** join/#brlcad Maloeran (n=maloeran@c510091F5.inet.catch.no) [NETSPLIT VICTIM] | |
| 17:35.56 | *** join/#brlcad docelic (n=docelic@212.91.114.162) | |
| 19:42.07 | *** join/#brlcad docelic (n=docelic@212.15.170.127) | |
| 22:00.53 | CIA-5 | BRL-CAD: 03brlcad * 10brlcad/autogen.sh: stash a cvs id for version reporting |
| 22:12.39 | *** join/#brlcad Twingy (n=justin@74.92.144.217) | |
| 22:41.33 | CIA-5 | BRL-CAD: 03brlcad * 10brlcad/autogen.sh: |
| 22:41.33 | CIA-5 | BRL-CAD: make autogen.sh now report a version number based on the last commit date as |
| 22:41.33 | CIA-5 | BRL-CAD: well as an auto-extracted copyright range. turn the version error reporting |
| 22:41.33 | CIA-5 | BRL-CAD: into a function so it can be updated in one place and fix/remove the trailing |
| 22:41.33 | CIA-5 | BRL-CAD: _SH that didn't belong. add comments at the beginning of each of the manual |
| 22:41.36 | CIA-5 | BRL-CAD: steps. when stashing COPYING and INSTALL in memory, make sure they actually fit |
| 22:41.38 | CIA-5 | BRL-CAD: -- irix seems to have issues. |
| 22:59.53 | *** join/#brlcad SWAT (n=SWAT@a80-100-68-159.adsl.xs4all.nl) | |
| 23:12.16 | *** join/#brlcad IriX64 (n=IriX64@bas3-sudbury98-1168057882.dsl.bell.ca) | |
| 23:46.19 | SWAT | how can I open an .igs file with brlcad? (and for that matter, how can I turn/view it, and afterwards print it?) |
| 23:48.06 | SWAT | and is there a way to convert an .igs file to .dwg or .dxf so it can be opened in other applications? (in combination with this, is it possible that a commercial tool would use it's own (incompatible) version of IGES which can't be read by brlcad?) |