| 00:05.46 | *** join/#brlcad louipc_ (n=louipc@bas8-toronto63-1177705948.dsl.bell.ca) | |
| 01:19.24 | CIA-4 | BRL-CAD: 03brlcad * 10brlcad/src/librt/db_open.c: db_get_version() was intentionally getting passed a partially initialized dbip -- require it be initialized before we pass it around anywywhere. clean up during failure cleanup on db_open() while we're at it. |
| 01:31.29 | CIA-4 | BRL-CAD: 03brlcad * 10brlcad/include/bu.h: add BU_DEBUG_ATTACH for the backtrace crash dump routines as a means for them to spin and wait for a debugger to attach. |
| 01:32.51 | CIA-4 | BRL-CAD: 03brlcad * 10brlcad/src/libbu/backtrace.c: utilize BU_DEBUG_ATTACH to allow for run-time attaching a debugger to apps that will potentially crash. this sends the app looping until a signal is received, or a variable is manually set in the debugger. |
| 01:46.06 | CIA-4 | BRL-CAD: 03brlcad * 10brlcad/include/ (36 files): |
| 01:46.06 | CIA-4 | BRL-CAD: get rid of RCS variables from the public header files. this is done in part to |
| 01:46.07 | CIA-4 | BRL-CAD: reduce recompilation during interface changes, but also to move towards not |
| 01:46.07 | CIA-4 | BRL-CAD: relying on or publishing the information contained in the variables |
| 01:46.07 | CIA-4 | BRL-CAD: interface-wise. (they're fine for c sources and private headers) |
| 01:52.12 | CIA-4 | BRL-CAD: 03brlcad * 10brlcad/ (TODO include/shortvect-pr.h include/shortvect.h): |
| 01:52.12 | CIA-4 | BRL-CAD: shortvect.h and shortvect-pr.h are both rather obsolete headers -- mark them as |
| 01:52.12 | CIA-4 | BRL-CAD: such with a #warning and make a note to remove them. if we're ever compiling on |
| 01:52.12 | CIA-4 | BRL-CAD: a cray again and need those features, they more appropriately belong in the |
| 01:52.12 | CIA-4 | BRL-CAD: config header. |
| 01:59.41 | MinstrelGypsy | ./bak/cvscheckout |
| 02:01.02 | MinstrelGypsy | been bust in include have you brlcad: |
| 02:01.07 | MinstrelGypsy | err busy too |
| 02:02.15 | MinstrelGypsy | urff failed to remove a lock file? |
| 02:02.41 | MinstrelGypsy | collision immenent :) |
| 02:06.16 | MinstrelGypsy | forgot the .sh anyway but it pays to checkout the channel occaisionally :) |
| 02:09.04 | CIA-4 | BRL-CAD: 03brlcad * 10brlcad/include/ (28 files): clean up the header protections so that they are all now more consistent with one another via use of __HEADER_H__ for the define names. |
| 02:09.15 | CIA-4 | BRL-CAD: 03brlcad * 10brlcad/src/mged/ged.h: don't declare the same thing that the public header declares for us |
| 02:11.05 | brlcad | making final preparations for 7.10.2 |
| 02:13.35 | CIA-4 | BRL-CAD: 03brlcad * 10brlcad/include/rtgeom.h: missed the endif |
| 02:17.30 | MinstrelGypsy | what's that old saying? "Love to watch my work work" :) (when it *does work) |
| 02:21.26 | CIA-4 | BRL-CAD: 03brlcad * 10brlcad/include/ (plot3.h raytrace.h): more consistency cleanup |
| 02:28.19 | b0ef | does brlcad do any form of uv mapping? |
| 02:46.14 | brlcad | yes, but generally only relevant when you use the various texture/projection shaders |
| 02:46.42 | brlcad | all the primitives have a routine that reports uv information for any given shotline |
| 02:50.21 | CIA-4 | BRL-CAD: 03brlcad * 10brlcad/src/librt/bigE.c: minor header cleanup |
| 02:59.51 | b0ef | brlcad: not sure I understand; I'm looking to uv map a set of meshes; can I use an image and have it tile over the mesh? |
| 03:00.15 | b0ef | like for example asphalt texture |
| 03:35.07 | MinstrelGypsy | a little "yea" is heard :) |
| 03:59.58 | *** join/#brlcad louipc (n=louipc@bas8-toronto63-1088754155.dsl.bell.ca) | |
| 05:16.05 | *** join/#brlcad ibot (i=ibot@pdpc/supporter/active/TimRiker/bot/apt) | |
| 05:16.06 | *** topic/#brlcad is BRL-CAD Open Source Solid Modeling || http://brlcad.org || http://sf.net/projects/brlcad || http://fisheye1.cenqua.com/browse/brlcad/brlcad || 7.10 is now released! .. e-mail announcements will follow posting of binary distributions | |
| 06:57.35 | *** join/#brlcad clock_ (i=clock@217-162-204-235.dclient.hispeed.ch) | |
| 08:58.26 | *** join/#brlcad elite01 (n=elite01@dslc-082-082-084-183.pools.arcor-ip.net) | |
| 12:20.28 | *** join/#brlcad elite01 (n=elite01@dslb-088-070-004-147.pools.arcor-ip.net) | |
| 14:27.49 | CIA-4 | BRL-CAD: 03brlcad * 10brlcad/src/libbu/bomb.c: move the variables off the stack, making them static globals, just to be more safe. Also, be more assertive about informing the user that a stack trace has been saved (since mged captures std output). |
| 14:29.51 | CIA-4 | BRL-CAD: 03brlcad * 10brlcad/ (Makefile.am bench/Makefile.am): delegate benchmark rules down to the bench dir so they're only in one place (and so files aren't generated in the top-level), mirroring what regress does. inform the user when benchmark completes about the clobber rule. |
| 15:31.46 | *** join/#brlcad louipc_ (n=louipc@bas8-toronto63-1096735497.dsl.bell.ca) | |
| 16:00.59 | *** join/#brlcad clock_ (i=clock@217-162-228-53.dclient.hispeed.ch) | |
| 16:55.52 | *** join/#brlcad smallfoot- (i=smallfoo@clamwin/translator/smallfoot) | |
| 17:32.08 | *** join/#brlcad ibot (i=ibot@pdpc/supporter/active/TimRiker/bot/apt) | |
| 17:32.08 | *** topic/#brlcad is BRL-CAD Open Source Solid Modeling || http://brlcad.org || http://sf.net/projects/brlcad || http://fisheye1.cenqua.com/browse/brlcad/brlcad || 7.10 is now released! .. e-mail announcements will follow posting of binary distributions | |
| 18:30.41 | *** join/#brlcad MinstrelGypsy (n=mario_du@bas2-sudbury98-1096601318.dsl.bell.ca) | |
| 18:30.42 | MinstrelGypsy | http://www.pastebin.ca/512083 <----- BrlCad : This is the one you fixed last night right? |
| 19:18.07 | *** join/#brlcad louipc_ (n=louipc@bas8-toronto63-1096735026.dsl.bell.ca) | |
| 20:00.33 | CIA-4 | BRL-CAD: 03brlcad * 10brlcad/bench/run.sh: add sanity checks for commands that are required, add ability to quell output entirely via QUIET and verbosely with VERBOSE. |
| 20:06.28 | *** join/#brlcad Elperion (n=Bary@84.135.66.22) | |
| 20:18.25 | CIA-4 | BRL-CAD: 03brlcad * 10brlcad/bench/run.sh: add support for a clobber command argument so the benchmark tool can clean up after itself no matter where it's run from |
| 20:27.13 | CIA-4 | BRL-CAD: 03brlcad * 10brlcad/bench/Makefile.am: build system no longer needs to know or care -- delegate cleanup to the benchmark tool directly |
| 20:28.10 | CIA-4 | BRL-CAD: 03brlcad * 10brlcad/NEWS: added 'clobber' cleanup command to benchmark tool |
| 20:30.55 | *** join/#brlcad yukonbob (n=bch@whthyt247-240.northwestel.net) | |
| 20:59.21 | CIA-4 | BRL-CAD: 03brlcad * 10brlcad/configure.ac: force the tk interface off for now, there are still many issues to resolve -- particularly crashes under os x |
| 21:04.47 | MinstrelGypsy | ;) |
| 21:07.01 | MinstrelGypsy | you need to add an item on the summary to indicate same |
| 21:56.31 | MinstrelGypsy | http://www.pastebin.ca/512474 <----- show stopper, latest checkout |
| 21:57.08 | MinstrelGypsy | err roots.c in librt |
| 21:57.55 | MinstrelGypsy | urfff i should support LOCAL? |
| 21:58.50 | CIA-4 | BRL-CAD: 03brlcad * 10brlcad/src/libfb/if_tk.c: libfb interface files are conditionally empty, so add the appropriate IF_TK protection |
| 21:59.16 | MinstrelGypsy | i do :) |
| 22:02.21 | CIA-4 | BRL-CAD: 03brlcad * 10brlcad/AUTHORS: bonomo's last name first, credit tim for his extensive tk interface contributions |
| 22:05.40 | CIA-4 | BRL-CAD: 03brlcad * 10brlcad/src/libdm/dm-tk.c: credit tim, ws |
| 22:05.53 | MinstrelGypsy | why on earth does taking LOCAL out fix it |
| 22:08.45 | *** join/#brlcad elite01 (n=elite01@dslb-088-070-004-147.pools.arcor-ip.net) | |
| 22:13.16 | CIA-4 | BRL-CAD: 03brlcad * 10brlcad/src/librt/roots.c: FAST and LOCAL are no longer really useful, adding more burden than they provide, so begin a move towards deprecation. |
| 22:15.27 | *** join/#brlcad louipc_ (n=louipc@bas8-toronto63-1096782493.dsl.bell.ca) | |
| 22:28.06 | *** join/#brlcad louipc__ (n=louipc@bas8-toronto63-1096667539.dsl.bell.ca) | |
| 22:40.20 | CIA-4 | BRL-CAD: 03brlcad * 10brlcad/autogen.sh: search for sed and pwd |
| 22:41.56 | CIA-4 | BRL-CAD: 03brlcad * 10brlcad/bench/run.sh: saying 'this' sounds quirky when running through make, use pwd instead |
| 22:50.10 | CIA-4 | BRL-CAD: 03brlcad * 10brlcad/TODO: investigate/fix db_walk_dispather crash in rt |
| 22:56.11 | *** join/#brlcad louipc (n=louipc@bas8-toronto63-1096669307.dsl.bell.ca) | |
| 23:18.35 | *** join/#brlcad poolio (n=poolio@c-69-251-3-107.hsd1.md.comcast.net) | |
| 23:29.00 | *** join/#brlcad louipc (n=louipc@bas8-toronto63-1088754040.dsl.bell.ca) | |
| 23:29.09 | MinstrelGypsy | http://www.pastebin.ca/512587 <--- will this actually allow system tcl/tk use? |
| 23:35.28 | *** join/#brlcad louipc_ (n=louipc@bas8-toronto63-1096669926.dsl.bell.ca) | |