| 00:24.29 | *** join/#brlcad namedrisk (n=arg@BHE201062173248.res-com.wayinternet.com.br) | |
| 00:24.38 | *** part/#brlcad namedrisk (n=arg@BHE201062173248.res-com.wayinternet.com.br) | |
| 00:41.33 | *** join/#brlcad Twingy (n=justin@74.92.144.217) | |
| 01:02.36 | *** join/#brlcad yukonbob (n=yukonbob@whthyt224-180.northwestel.net) | |
| 01:14.07 | *** join/#brlcad b0ef (n=b0ef@062016141081.customer.alfanett.no) | |
| 01:24.12 | *** join/#brlcad ewilhelm (n=ewilhelm@pool-71-111-49-155.ptldor.dsl-w.verizon.net) | |
| 02:14.22 | brlcad | poolio: you can't use the uniresource for multi-cpu |
| 02:14.47 | brlcad | it's specifically (and staticly) meant for single-cpu routines only |
| 02:15.09 | brlcad | any other use would probably fall under the "unexpected behavior" if not a slew of other .. "issues" |
| 03:46.36 | poolio | brlcad: yeah, but I've cut it down to one cpu while I test |
| 03:46.46 | poolio | I'm using uniresource and settings the number of CPUs to 1 |
| 04:09.41 | brlcad | k, thought I saw a patch that tried to used the uni for many is only reason I mentioned it |
| 04:10.47 | brlcad | I'm packing up now, getting ready for my flight, so I'll not be on-line much until Saturday "probably" .. airports are more connected these days and I did get ssh over ssl set up nicely so I might be on hand at least listening |
| 04:13.34 | PrezKennedy | where ya flying to? |
| 04:14.06 | poolio | brlcad: hmm alright, I'm flying to Chicago tomorrow :P |
| 04:14.12 | poolio | (just for the weekend) |
| 04:14.57 | poolio | brlcad: I guess I'll keep trying to see what I can get done on my own, although I'm not sure there's much. There's some more code that can be cleaned up, and I have some ideas for optimizations I can put in |
| 04:15.37 | poolio | brlcad: Do you want me to send you the monthly report or send it to Mary Jane as you'll be gone? |
| 04:16.41 | brlcad | tomorrow as in Sat? |
| 04:17.20 | poolio | ah no |
| 04:17.21 | poolio | later today |
| 04:17.23 | brlcad | :) |
| 04:17.25 | poolio | oops ... damn day changed. |
| 04:27.02 | *** join/#brlcad brlcad (n=sean@bz.bzflag.bz) | |
| 04:27.22 | brlcad | gah |
| 04:27.36 | brlcad | <PROTECTED> |
| 04:31.27 | poolio | hehe |
| 05:51.30 | *** join/#brlcad digitalfredy (n=digitalf@200.71.62.161) | |
| 05:54.10 | *** part/#brlcad digitalfredy (n=digitalf@200.71.62.161) | |
| 07:39.30 | *** join/#brlcad tarzeau_ (i=sengun@berlin.ethz.ch) | |
| 10:09.02 | *** join/#brlcad Laniakea (n=clock@zux221-122-143.adsl.green.ch) | |
| 11:08.01 | *** join/#brlcad elite01 (n=elite01@dslb-088-070-007-086.pools.arcor-ip.net) | |
| 11:43.38 | *** join/#brlcad thing0 (n=ric@203-59-184-168.dyn.iinet.net.au) | |
| 11:43.42 | thing0 | hey yall |
| 12:17.58 | poolio | mornin |
| 12:24.52 | thing0 | evening |
| 12:24.53 | thing0 | hehe |
| 14:27.29 | *** join/#brlcad PrezKennedy (n=Matt@74.86.45.130) | |
| 15:33.15 | *** join/#brlcad b0ef (n=b0ef@062016141081.customer.alfanett.no) | |
| 16:34.30 | *** join/#brlcad Laniakea (n=clock@zux221-122-143.adsl.green.ch) | |
| 17:16.54 | *** join/#brlcad yukonbob (n=yukonbob@whthyt224-180.northwestel.net) | |
| 18:48.54 | *** join/#brlcad Laniakea (i=clock@77-56-106-16.dclient.hispeed.ch) | |
| 19:00.23 | Laniakea | ``Erik: have you succeeded installing OpenBSD? |
| 19:03.51 | ``Erik | heh, nope :) |
| 19:04.35 | ``Erik | *ponder* |
| 19:05.14 | ``Erik | I wonder if obsd can run diskless using PXE to boot and using an NFS share (on a fbsd box) as the core fs? |
| 19:19.27 | Laniakea | I don't know |
| 19:27.12 | ``Erik | SWEET, emacs crashed |
| 19:29.32 | Laniakea | ``Erik: but I would expect boot from network should be supported |
| 19:30.06 | Laniakea | I am actually now compiling Ronja with a non-functional brl-cad |
| 19:30.23 | Laniakea | seems that the pictures produced with rt are OK, makes a meaningful video. |
| 19:30.34 | Laniakea | maybe just the mged is screwed up because of the tcl/tk |
| 19:32.08 | ``Erik | rt doesn't use tcl |
| 19:32.34 | ``Erik | *ponder* |
| 19:32.36 | Laniakea | yeah |
| 19:32.50 | ``Erik | do you have autoconf, automake, and a lot of spare time? |
| 19:33.04 | Laniakea | autoconf automake yes |
| 19:33.16 | Laniakea | spare time do you mean human time or time running something in the background? |
| 19:33.25 | ``Erik | mostly machine time |
| 19:33.29 | Laniakea | yeah I have |
| 19:33.55 | ``Erik | if we were to, say, 'make distclean', edit configure.ac, change one line, run ./autogen.sh, then configure, then build... and see if that works? |
| 19:34.08 | Laniakea | but for about a week the Ronja will be compiled because a friend suggested the videos would look better from some elevation rather than from 0 elevation |
| 19:34.19 | Laniakea | so I am recompiling now everything with 15 deg elevation |
| 19:34.22 | ``Erik | configure.ac line 2530, and change where it says "*openbsd*" to "*openbsd-[[1-3]]*" ? (like the fbsd one) |
| 19:34.37 | *** join/#brlcad dtidrow (n=dtidrow@host131.objectsciences.com) | |
| 19:35.15 | ``Erik | and the same on line 2642 |
| 19:35.27 | ``Erik | and 2739 |
| 19:36.02 | ``Erik | and 2852... um, any line that has 'openbsd' |
| 19:36.09 | ``Erik | in fact |
| 19:36.24 | ``Erik | sed -i.bak 's/openbsd/openbsd-[[1-3]]/' configure.ac |
| 19:37.06 | ``Erik | <-- under the impression that obsd4 introduced new library naming |
| 20:03.01 | *** join/#brlcad IriX64 (n=IriX64@bas2-sudbury98-1096601569.dsl.bell.ca) | |
| 20:43.42 | IriX64 | http://rafb.net/p/vAxwK991.html <--- somethings missing here but i don't know the code so i'm stumped |
| 20:53.16 | *** join/#brlcad _jack- (i=jack@dub.minimal.nl) | |
| 20:54.38 | IriX64 | maybe it's me, if_wgl.c exhibits similar problems |
| 20:56.23 | IriX64 | bbl8r |
| 21:29.24 | *** join/#brlcad IriX64 (n=mariodot@bas2-sudbury98-1096601569.dsl.bell.ca) | |
| 21:30.25 | IriX64 | heh http://www3.sympatico.ca/mario.dulisse2/7-10.1inaction |
| 21:31.51 | IriX64 | thats with X-ming (chortle) |
| 21:39.44 | IriX64 | same url /editobject1.png :) |
| 21:39.59 | ``Erik | hum |
| 21:40.08 | IriX64 | boring eh? |
| 21:40.12 | IriX64 | :) |
| 21:40.41 | CIA-29 | BRL-CAD: 03erikgreenwald * 10brlcad/src/libfb/if_ogl.c: Skip if windows, if_wgl.c is for that |
| 21:41.05 | IriX64 | thank you |
| 21:41.16 | ``Erik | hopefully that fixes things, heh |
| 21:41.29 | IriX64 | but if_wgl.c has same type of issues, would you like a paste |
| 21:41.49 | IriX64 | heh fixed for unixland |
| 21:42.17 | IriX64 | ill do an update and try again |
| 21:44.38 | IriX64 | l8r |
| 21:46.52 | *** join/#brlcad Twingy (n=justin@74.92.144.217) | |
| 21:48.56 | ``Erik | oi, twingy |
| 21:49.03 | Twingy | greetings |
| 21:49.15 | ``Erik | I sent ya an email this morning, looking for the latest isst, is that on sf? |
| 21:49.31 | Twingy | um |
| 21:49.37 | Twingy | it's probably in my home directory |
| 21:50.28 | ``Erik | hum, if you get some free time on monday, think you could tar up a drop for me? ed wnats me to look at the cone/region thing |
| 21:51.00 | Twingy | well, I'm working sunday and taking monday off |
| 21:51.10 | Twingy | that way I can get some work done without being disturbed |
| 21:51.14 | ``Erik | <-- not in until tuesday and about to go home |
| 21:51.23 | ``Erik | if you happen to have 5 minutes *shrug* :) |
| 21:51.30 | Twingy | 5 minutes when? |
| 21:51.40 | ``Erik | um, whenever? heh |
| 21:51.47 | Twingy | you just need the files? |
| 21:51.49 | ``Erik | yeah |
| 21:51.55 | Twingy | I can send them to you tonight |
| 21:51.58 | ``Erik | ok |
| 21:52.09 | Twingy | I'll make a tar.gz and make sure they compile |
| 21:52.19 | Twingy | all the code is documented |
| 21:52.20 | ``Erik | cool, thanks |
| 21:52.29 | Twingy | there should be instructions on usage in the README |
| 21:52.36 | ``Erik | sweet |
| 21:53.02 | Twingy | if you look at the visible region shader |
| 21:53.26 | Twingy | that is a 20-30 line file that shows how to plug in your own code for visualization of whatever |
| 21:54.04 | ``Erik | at the moment, I'll probably do the q&d 'fire lots of rays in the cone and record what gets hit, then paint that a funny color on visualization' approach |
| 21:54.09 | Twingy | it may be prudent to throw away libtie with 5 functions and plug in rayforce |
| 21:54.36 | ``Erik | possibly, but that might take longer than I care to take :D |
| 21:54.45 | Twingy | otherwise you will be limited to a few million rays/sec |
| 21:56.19 | ``Erik | 'filevault' is a little off in its time estimates :/ by a factor of ~2 |
| 21:57.06 | *** join/#brlcad IriX64 (n=mariodot@bas2-sudbury98-1096601569.dsl.bell.ca) | |
| 21:57.46 | IriX64 | ``Erik? shouldn't the logic be if ogl and !wgl ? |
| 21:58.08 | IriX64 | stead of or |
| 22:03.36 | IriX64 | errand to run be back in 5 |
| 22:14.28 | ``Erik | erm |
| 22:14.34 | ``Erik | woops |
| 22:15.11 | IriX64 | heh |
| 22:15.19 | IriX64 | thatll still work :) |
| 22:15.41 | CIA-29 | BRL-CAD: 03erikgreenwald * 10brlcad/src/libfb/if_ogl.c: oops, "and", not "or" |
| 22:39.17 | IriX64 | true beauty of this is it'll be running the unix code and with a handfull of dll's and an xserver for windows, anybody can have this on their desktop |
| 22:54.54 | IriX64 | hex.c on that site will make threaded bolts for you (not my effort) |