| 00:00.12 | *** join/#brlcad PrezKennedyII (i=Matthew@whitecalf.net) | |
| 00:35.21 | *** join/#brlcad ``Erik (i=Here@c-69-140-109-104.hsd1.md.comcast.net) [NETSPLIT VICTIM] | |
| 00:35.21 | *** join/#brlcad PrezKennedy (i=Matthew@whitecalf.net) [NETSPLIT VICTIM] | |
| 00:35.21 | *** join/#brlcad Yoshi47 (n=jan@firewall.walinga.com) [NETSPLIT VICTIM] | |
| 00:35.21 | *** join/#brlcad starseeker (n=starseek@bz.bzflag.bz) [NETSPLIT VICTIM] | |
| 00:35.21 | *** join/#brlcad archivist (n=archivis@host81-149-119-172.in-addr.btopenworld.com) [NETSPLIT VICTIM] | |
| 00:35.21 | *** join/#brlcad alex_joni (n=alex_jon@emc/board-of-directors/alexjoni) [NETSPLIT VICTIM] | |
| 00:35.21 | *** join/#brlcad kanzure (i=bryan@146.6.84.36) [NETSPLIT VICTIM] | |
| 00:35.21 | *** join/#brlcad CIA-28 (n=CIA@208.69.182.149) [NETSPLIT VICTIM] | |
| 00:36.04 | *** join/#brlcad BigAToo (n=BigAToo@pool-96-230-124-74.sbndin.btas.verizon.net) | |
| 06:58.31 | *** join/#brlcad Ralith (n=ralith@69.90.48.127) | |
| 10:13.27 | *** join/#brlcad _clock_ (n=_sushi_@80-218-244-105.dclient.hispeed.ch) | |
| 10:58.45 | *** join/#brlcad parigaudi (n=quassel@pd95b7f5e.dip0.t-ipconnect.de) | |
| 11:34.59 | *** join/#brlcad BigAToo (n=BigAToo@pool-96-230-124-74.sbndin.btas.verizon.net) | |
| 11:51.37 | CIA-28 | BRL-CAD: 03Jlfranks 07http://brlcad.org * r1627 10/wiki/Main_Page: /* Getting started */ |
| 12:02.11 | CIA-28 | BRL-CAD: 03Jlfranks 07http://brlcad.org * r1628 10/wiki/Forums: Added a list of links to BRL-CAD Forums |
| 12:12.18 | Yoshi47 | 17161:21 mged |
| 12:13.37 | CIA-28 | BRL-CAD: 03Jlfranks 07http://brlcad.org * r1629 10/wiki/Main_Page: /* Getting started */ |
| 12:14.46 | brlcad | Yoshi47: heh, that's pretty insane |
| 12:15.04 | brlcad | so do you let it keep going, or pull a knife? |
| 12:15.13 | Yoshi47 | its a good thing im not running m$ |
| 12:15.18 | Yoshi47 | i don't know |
| 12:15.19 | brlcad | rest assured, it should eventually finish :) |
| 12:15.24 | Yoshi47 | i might have to restart my X |
| 12:15.36 | Yoshi47 | eventually... |
| 12:15.44 | Yoshi47 | i might retire by then or get fired |
| 12:15.45 | brlcad | the time is exponential based on the complexity of the mesh |
| 12:16.12 | Yoshi47 | oh i just seen the cpu dip |
| 12:16.18 | Yoshi47 | onto the next part im guessing |
| 12:16.37 | brlcad | it was just taking a breather |
| 12:16.48 | Yoshi47 | ah, well im compiling too! |
| 12:17.09 | CIA-28 | BRL-CAD: 03Jlfranks 07http://brlcad.org * r1630 10/wiki/Main_Page: /* Getting started */ |
| 12:19.53 | CIA-28 | BRL-CAD: 03Jlfranks 07http://brlcad.org * r1631 10/wiki/Main_Page: /* Getting started */ |
| 12:21.55 | CIA-28 | BRL-CAD: 03Sean 07http://brlcad.org * r1632 10/wiki/Documentation: added installation instructions, link to INSTALL file |
| 13:09.23 | ``Erik | brlcad: nikki is trying to set up lunch at japan house, ya gonna be in the area? |
| 13:11.46 | *** join/#brlcad PrezKennedyII (i=Matthew@whitecalf.net) | |
| 13:14.37 | brlcad | ``Erik: okay, yeah |
| 13:42.33 | CIA-28 | BRL-CAD: 03brlcad * r35995 10/brlcad/trunk/src/mged/mged.c: this is wrong and breaks things for classic mode, but commit it now so I'll have it on the road to work on later today. there's a problem where it prompts for attach too many times (among other outstanding issues). |
| 13:42.45 | CIA-28 | BRL-CAD: 03brlcad * r35996 10/brlcad/trunk/src/libdm/color.c: don't include dm_color.h |
| 13:44.42 | Yoshi47 | japan house? |
| 13:51.06 | brlcad | Yoshi47: local sushi place |
| 13:51.28 | Yoshi47 | sushi... ick, who's nikki? |
| 13:51.43 | brlcad | just some crazy girl |
| 13:51.51 | Yoshi47 | brlcad programmer? |
| 13:51.56 | brlcad | heh, no |
| 13:52.13 | Yoshi47 | in your building? |
| 13:52.18 | brlcad | just a mutual friend |
| 13:52.31 | Yoshi47 | ah |
| 13:53.30 | Yoshi47 | you know anyone that can hack in and revert the 1 trillion dollar print? |
| 13:54.16 | Yoshi47 | then hire MIB to brainwash everyone that it didn't happen so the US dollar can go up again |
| 13:54.55 | CIA-28 | BRL-CAD: 03erikgreenwald * r35997 10/brlcad/trunk/src/librt/primitives/sketch/sketch_brep.cpp: wrap declarations in braces to avoid case label cross initialization error |
| 14:39.27 | *** join/#brlcad BigAToo (n=BigAToo@pool-96-230-124-74.sbndin.btas.verizon.net) | |
| 14:57.22 | brlcad | Yoshi47: I already answered that question to you, hired them, then had them wipe your memory |
| 14:57.40 | Yoshi47 | thought so |
| 15:06.20 | *** join/#brlcad BigAToo1 (n=BigAToo@pool-96-230-124-72.sbndin.btas.verizon.net) | |
| 15:12.11 | CIA-28 | BRL-CAD: 03starseeker * r35998 10/brlcad/trunk/src/librt/primitives/sketch/sketch_brep.cpp: Think about loop building using the ON_Brep edges - simpler than trying to do it with the csg data structures and then attempting translation. |
| 16:00.07 | *** join/#brlcad BigAToo (n=BigAToo@pool-96-230-124-72.sbndin.btas.verizon.net) | |
| 16:04.27 | CIA-28 | BRL-CAD: 03starseeker * r35999 10/brlcad/trunk/src/librt/primitives/sketch/sketch_brep.cpp: |
| 16:04.27 | CIA-28 | BRL-CAD: Going to need 2d and 3d curves for all the sketch components - need the surface |
| 16:04.27 | CIA-28 | BRL-CAD: extents to get uv coordinates. Start building 3 space bounding box from |
| 16:04.27 | CIA-28 | BRL-CAD: components to get information about what extents the surface will need to have. |
| 16:39.04 | *** join/#brlcad parigaudi (n=quassel@pd95b7f5e.dip0.t-ipconnect.de) | |
| 16:42.34 | CIA-28 | BRL-CAD: 03starseeker * r36000 10/brlcad/trunk/src/librt/primitives/sketch/sketch_brep.cpp: Start trying to create appropriate 2d curves for trimming purposes. |
| 16:52.33 | CIA-28 | BRL-CAD: 03starseeker * r36001 10/brlcad/trunk/BUGS: hyp tesselation is producing something that doesn't raytrace |
| 16:54.33 | CIA-28 | BRL-CAD: 03bob1961 * r36002 10/brlcad/trunk/src/librt/primitives/hyp/hyp.c: Removed a few unused variables. Identified a problem in the tessellation routine (i.e. RoS and invRoS are being used without initialization. |
| 17:44.25 | *** join/#brlcad PrezKennedy (i=Matthew@whitecalf.net) | |
| 17:45.46 | *** join/#brlcad roberthl (n=robert@cpc4-flit1-0-0-cust283.lutn.cable.ntl.com) | |
| 17:50.56 | *** join/#brlcad roberthl_ (n=robert@rhl.me.uk) | |
| 18:02.14 | *** join/#brlcad roberthl (n=robert@rhl.me.uk) | |
| 18:20.05 | *** join/#brlcad talcite (n=Matthew@134.117.143.147) | |
| 19:07.17 | CIA-28 | BRL-CAD: 03starseeker * r36003 10/brlcad/trunk/src/librt/primitives/sketch/sketch_brep.cpp: OK, starting to build loops, but trims aren't valid. |
| 19:20.32 | *** join/#brlcad samrose (n=samrose@c-24-11-185-57.hsd1.mi.comcast.net) | |
| 19:33.52 | brlcad | interesting, http://www.youtube.com/watch?v=w7GErbdNRrE&feature=player_embedded |
| 19:34.23 | brlcad | whole new realm of a CAD model catalog :) |
| 19:44.29 | Yoshi47 | neat |
| 19:45.51 | *** join/#brlcad cpc26 (n=cpc26@72.170.156.242) | |
| 19:47.44 | *** join/#brlcad cpc26 (n=cpc26@72.170.156.242) | |
| 21:10.36 | CIA-28 | BRL-CAD: 03starseeker * r36004 10/brlcad/trunk/src/librt/primitives/sketch/sketch_brep.cpp: Still not getting valid loops. Grr. |
| 21:19.22 | *** join/#brlcad BigAToo (n=BigAToo@pool-96-230-124-72.sbndin.btas.verizon.net) | |
| 21:25.20 | CIA-28 | BRL-CAD: 03starseeker * r36005 10/brlcad/trunk/src/librt/primitives/sketch/sketch_brep.cpp: OK, the wrong loop is getting removed. need to sort this out. |
| 21:26.38 | CIA-28 | BRL-CAD: 03brlcad * r36006 10/brlcad/trunk/src/rt/ (read-rtlog.c rtregis.c): refactor, cleanup, indent, sort. |
| 21:28.17 | CIA-28 | BRL-CAD: 03starseeker * r36007 10/brlcad/trunk/src/librt/primitives/sketch/sketch_brep.cpp: Er, yeah - use m_c2i from the trim. Doesn't fix the problem but does duplicate correctly. |
| 21:40.47 | CIA-28 | BRL-CAD: 03starseeker * r36008 10/brlcad/trunk/src/librt/primitives/sketch/sketch_brep.cpp: Ah, of course - inserting the outer loop at the beginning of m_li, so bump the count by one to get rid of the correct loop. |
| 21:45.09 | CIA-28 | BRL-CAD: 03brlcad * r36009 10/brlcad/trunk/src/rt/viewpp.c: more format tweakage. |
| 21:51.17 | CIA-28 | BRL-CAD: 03starseeker * r36010 10/brlcad/trunk/src/librt/primitives/sketch/sketch_brep.cpp: Crud, will have to rethink edge creation. |
| 22:39.58 | CIA-28 | BRL-CAD: 03starseeker * r36011 10/brlcad/trunk/src/librt/primitives/sketch/sketch_brep.cpp: OK, progress (sort of) - it wasn't edge creation, but a disconnect between edge and 3d curve selection. Now the complaint is m_T[0] being different from the start of the 3d curve. |
| 22:41.32 | CIA-28 | BRL-CAD: 03brlcad * r36012 10/brlcad/trunk/src/fb/fb-png.c: clean up formatting, indent, style. |
| 22:46.21 | louipc | ehh americhip doesn't look as good as I was expecting |
| 22:46.38 | CIA-28 | BRL-CAD: 03brlcad * r36013 10/brlcad/trunk/src/util/pix-png.c: clean up formatting, indent, style. |
| 23:18.53 | CIA-28 | BRL-CAD: 03brlcad * r36014 10/brlcad/trunk/src/conv/iges/n_iges.cpp: swap it back to manifold solid brep objects instead of rational bspline surfaces while testing import. |
| 23:21.26 | CIA-28 | BRL-CAD: 03brlcad * r36015 10/brlcad/trunk/src/conv/dem-g.c: eliminate the mk_dsp2() stub by just calling mk_dsp() now that it has whatever change necessitated creating the fork. also applied some commment cleanup. |
| 23:36.12 | CIA-28 | BRL-CAD: 03starseeker * r36016 10/brlcad/trunk/src/librt/primitives/sketch/sketch_brep.cpp: Not correct, but the error distance changed so it's clear that changing the surface domain will have an impact. |
| 23:38.05 | *** join/#brlcad Axman6 (n=Axman6@pdpc/supporter/student/Axman6) | |
| 23:41.05 | CIA-28 | BRL-CAD: 03brlcad * r36017 10/brlcad/trunk/ (NEWS src/util/pix-png.1 src/util/pix-png.c): |
| 23:41.05 | CIA-28 | BRL-CAD: add a -g gamma correction option to pix-png similar to fb-png so that a user can |
| 23:41.05 | CIA-28 | BRL-CAD: override and specify a desired gamma value. change the default behavior from |
| 23:41.05 | CIA-28 | BRL-CAD: writing out a hard-coded 0.6 gamma value to instead not write out any gAMA chunk |
| 23:41.06 | CIA-28 | BRL-CAD: information (via a default negative value). this lets it display the same |
| 23:41.08 | CIA-28 | BRL-CAD: intensity pixel values on a host system as the originating pix data and avoids |
| 23:41.10 | CIA-28 | BRL-CAD: the (semi-arbitrary) 0.6 magic value that 'does not quite match..' |
| 23:41.58 | *** join/#brlcad Ralith (n=ralith@69.90.48.127) | |
| 23:46.16 | CIA-28 | BRL-CAD: 03brlcad * r36018 10/brlcad/trunk/src/util/: ignore the generated rtwizard script |
| 23:49.56 | CIA-28 | BRL-CAD: 03brlcad * r36019 10/brlcad/trunk/ (NEWS src/fb/fb-png.1 src/fb/fb-png.c): |
| 23:49.56 | CIA-28 | BRL-CAD: default to no gamma correction, no gAMA chunk, so that the png pixel values |
| 23:49.56 | CIA-28 | BRL-CAD: should match what was in the framebuffer. looks like 1.0 is overpowered for |
| 23:49.56 | CIA-28 | BRL-CAD: mac, 0.6 is closer but still slightly too bright. turning the chunk off gives |
| 23:49.57 | CIA-28 | BRL-CAD: correct pixel values. turns out the -g option was never documented either, so |
| 23:49.59 | CIA-28 | BRL-CAD: document it along with the new info. this should reduce surprises due to |
| 23:50.01 | CIA-28 | BRL-CAD: unexpected color shifts in output images. |
| 23:52.20 | CIA-28 | BRL-CAD: 03brlcad * r36020 10/brlcad/trunk/BUGS: |
| 23:52.20 | CIA-28 | BRL-CAD: the fb-png gamma correction 'bug' turns out to not be a bug after all, just a |
| 23:52.20 | CIA-28 | BRL-CAD: bad default gamma value coupled with an undocumented command-line option. |
| 23:52.20 | CIA-28 | BRL-CAD: either way, it's changed/fixed now that no gAMA chunk is getting written by |
| 23:52.20 | CIA-28 | BRL-CAD: default. |
| 23:57.17 | CIA-28 | BRL-CAD: 03starseeker * r36021 10/brlcad/trunk/src/librt/primitives/sketch/sketch_brep.cpp: Hmm - back to 22.36 for the offset. Something odd here... |