| 00:22.41 | CIA-38 | BRL-CAD: 03brlcad * r37197 10/brlcad/trunk/regress/ (Makefile.am library.sh): initial library file to refactor the code common to most all of the tests, to help search for binaries they use and set up the runtime library search path |
| 00:23.32 | CIA-38 | BRL-CAD: 03brlcad * r37198 10/brlcad/trunk/regress/fastgen.sh: use the new library 'ensearch' function to find fast4-g and g_diff |
| 00:31.14 | *** join/#brlcad R0b0t1 (n=Enigma@unaffiliated/r0b0t1) | |
| 01:00.23 | CIA-38 | BRL-CAD: 03brlcad * r37199 10/brlcad/trunk/regress/ (11 files): make all of the tests use the same searching mechanism to find the binaries they use. |
| 01:03.12 | CIA-38 | BRL-CAD: 03brlcad * r37200 10/brlcad/trunk/regress/library.sh: library path will go too quickly if we search for too many binaries (since we don't check for duplicates), so only add the one that should work |
| 01:09.49 | CIA-38 | BRL-CAD: 03brlcad * r37201 10/brlcad/trunk/regress/solids.sh: search for all the binaries we use instead of assuming relative |
| 01:22.46 | CIA-38 | BRL-CAD: 03brlcad * r37202 10/brlcad/trunk/regress/ (11 files): need to be able to find library for out-of-dir builds, so source from /regress |
| 02:04.56 | CIA-38 | BRL-CAD: 03brlcad * r37203 10/brlcad/trunk/regress/mged.sh: minor |
| 02:05.31 | CIA-38 | BRL-CAD: 03brlcad * r37204 10/brlcad/trunk/regress/library.sh: vars exported within a function do not transfer to the parent scope, push the library path up. try a simple relative dir for now. |
| 02:10.06 | starseeker | brlcad: should I look at moving the existing sh logic into tcl or is that a no-go? (understand if you're not waiting for the tcl stuff, just want to know if that part of regress is planned to stay in sh regardless) |
| 02:53.18 | CIA-38 | BRL-CAD: 03brlcad * r37205 10/brlcad/trunk/src/gtools/g_diff.c: |
| 02:53.18 | CIA-38 | BRL-CAD: if Tcl_Init() fails, don't halt .. just report the warning (it's probably just |
| 02:53.18 | CIA-38 | BRL-CAD: failure to find itcl.tcl when regression testing out-of-dir). quell the |
| 02:53.18 | CIA-38 | BRL-CAD: remainder of compilation warnings too including a couple exact floating point |
| 02:53.19 | CIA-38 | BRL-CAD: comparisons. |
| 02:55.28 | brlcad | starseeker: implement whatever you need -- I wouldn't mess with the existing tests unless they're the last piece remaining |
| 02:55.40 | starseeker | cool |
| 02:55.52 | brlcad | wouldn't convert them just for the sake of converting them |
| 02:56.04 | brlcad | until there's some stronger testing benefit |
| 02:56.16 | starseeker | nods |
| 03:08.41 | *** join/#brlcad PrezKennedy (i=Matthew@whitecalf.net) [NETSPLIT VICTIM] | |
| 03:08.41 | *** join/#brlcad SWPadnos (n=Me@emc/developer/SWPadnos) [NETSPLIT VICTIM] | |
| 03:08.47 | *** join/#brlcad Nohla (n=jesica@168.226.179.216) | |
| 03:08.47 | CIA-38 | BRL-CAD: 03brlcad * r37206 10/brlcad/trunk/regress/fastgen.sh: fastgen_dos.fastf4 is a reference file in the source dir |
| 03:09.36 | *** join/#brlcad ChanServ (ChanServ@services.) | |
| 03:09.36 | *** join/#brlcad R0b0t1 (n=Enigma@unaffiliated/r0b0t1) [NETSPLIT VICTIM] | |
| 03:09.37 | *** join/#brlcad cosurgi (n=cosurgi@atak.bl.pg.gda.pl) [NETSPLIT VICTIM] | |
| 03:09.37 | *** join/#brlcad Phurl (n=mdupont@ip-81-210-245-60.unitymediagroup.de) [NETSPLIT VICTIM] | |
| 03:09.37 | *** join/#brlcad archivist (n=archivis@host81-149-119-172.in-addr.btopenworld.com) [NETSPLIT VICTIM] | |
| 03:09.37 | *** join/#brlcad Ralith (n=ralith@69.90.48.97) [NETSPLIT VICTIM] | |
| 03:09.37 | *** join/#brlcad Computer (n=Computer@unaffiliated/computer) [NETSPLIT VICTIM] | |
| 03:09.37 | *** join/#brlcad ``Erik (n=erik@c-69-140-109-104.hsd1.md.comcast.net) [NETSPLIT VICTIM] | |
| 03:09.37 | *** join/#brlcad d-lo (n=claymore@BZ.BZFLAG.BZ) [NETSPLIT VICTIM] | |
| 03:09.37 | *** join/#brlcad roberthl (n=robert@silentflame/member/roberthl) [NETSPLIT VICTIM] | |
| 03:09.37 | *** join/#brlcad yukonbob (i=1000@s142-179-54-198.bc.hsia.telus.net) [NETSPLIT VICTIM] | |
| 03:09.37 | *** join/#brlcad Maloeran (n=maloeran@glvortex.net) [NETSPLIT VICTIM] | |
| 03:09.37 | *** join/#brlcad indianla1ry (n=indianla@BZ.BZFLAG.BZ) [NETSPLIT VICTIM] | |
| 03:09.37 | *** join/#brlcad alex_joni (n=alex_jon@emc/board-of-directors/alexjoni) [NETSPLIT VICTIM] | |
| 03:09.37 | *** join/#brlcad brlcad (n=sean@BZ.BZFLAG.BZ) [NETSPLIT VICTIM] | |
| 03:09.37 | *** join/#brlcad poolio (n=poolio@BZ.BZFLAG.BZ) [NETSPLIT VICTIM] | |
| 03:09.37 | *** join/#brlcad stevegt` (n=stevegt@cislunar.TerraLuna.Org) [NETSPLIT VICTIM] | |
| 03:09.37 | *** mode/#brlcad [+o ChanServ] by irc.freenode.net | |
| 03:10.02 | brlcad | mm, so the regression tests are close to working again, just solids and shaders failing |
| 03:12.04 | Nohla | brlcad holas! |
| 03:12.14 | brlcad | hola Nohla |
| 03:12.34 | Nohla | como estas? |
| 03:18.56 | Nohla | ok, how are you? :) |
| 03:21.21 | brlcad | bien! |
| 03:22.10 | brlcad | I saw the new translations, looks great! |
| 03:29.22 | *** join/#brlcad Computer_ (n=Computer@209-16-114-100.net.bhntampa.com) | |
| 03:43.55 | ``Erik | brlcad: just in-dir, not out of dir? |
| 03:47.44 | Nohla | brlcad I'm finishing the 3rd |
| 03:48.02 | Nohla | and finished #7 |
| 03:48.24 | Nohla | a friend helped with this |
| 03:48.48 | Nohla | but I cant run make succesfully |
| 03:49.30 | Nohla | could I send you both, makefile and tutos by email? |
| 03:59.34 | brlcad | ``Erik: what? |
| 03:59.58 | brlcad | Nohla: how you've been sending to the mailing list works fine |
| 04:00.08 | ``Erik | regress in an out-of-dir build, that's still on the todo queue? |
| 04:00.29 | brlcad | nope, I have that working now |
| 04:00.50 | brlcad | that was the slew of commits earlier |
| 04:00.55 | ``Erik | swank, there were a lot of assumptions in the shell scripts |
| 04:01.07 | ``Erik | yehhhh, I figured I'd catch up on those after tomorrows meeting :) |
| 04:01.08 | brlcad | the solids and shader tests are failing with the tolerance changes, isolating |
| 04:01.11 | Nohla | I'll try not to forget "/" :) |
| 04:01.26 | brlcad | :) |
| 04:20.26 | *** join/#brlcad Nohla (n=jesica@168.226.178.50) | |
| 06:10.58 | CIA-38 | BRL-CAD: 03brlcad * r37207 10/brlcad/trunk/src/librt/roots.c: |
| 06:10.58 | CIA-38 | BRL-CAD: okay, so the root solver is SUPER sensitive to these two changes. one is an |
| 06:10.58 | CIA-38 | BRL-CAD: exact floating point comparison being made, the other was a tolerance tightened |
| 06:10.59 | CIA-38 | BRL-CAD: up from a value set loose in the mid-80's for irix2. this fixes the eto |
| 06:10.59 | CIA-38 | BRL-CAD: ray-tracing failures caught by the solids.sh regression test. the |
| 06:11.01 | CIA-38 | BRL-CAD: SQRT_SMALL_FASTF change notably seems to mostly cause subtle off-by-one changes |
| 06:11.03 | CIA-38 | BRL-CAD: which might be tolerable but will need more investigation. |
| 06:18.07 | CIA-38 | BRL-CAD: 03brlcad * r37208 10/brlcad/trunk/src/librt/Makefile.am: cannot be strict while that roots tolerance issue is unresolved. undo strictness to prepare for release. |
| 06:20.47 | CIA-38 | BRL-CAD: 03brlcad * r37209 10/brlcad/trunk/TODO: fix/address the src/librt/roots.c issues. |
| 06:21.22 | *** join/#brlcad akafubu (n=akafubu@unaffiliated/akafubu) | |
| 07:16.04 | *** join/#brlcad akafubu (n=akafubu@unaffiliated/akafubu) | |
| 12:35.14 | d-lo | Mornin all |
| 12:53.43 | ``Erik | blargh |
| 12:57.52 | Ralith | blargh indeed |
| 13:03.13 | starseeker | peals open his eyelids |
| 13:35.52 | d-lo | up late starseeker ? |
| 14:02.09 | CIA-38 | BRL-CAD: 0395.135.31.61 07http://brlcad.org * r2182 10/wiki/Main_Page: |
| 15:47.41 | CIA-38 | BRL-CAD: 03davidloman * r37210 10/rt^3/trunk/include/GS/GSCommon.h: Add in header file for GS global defines. |
| 15:51.01 | ``Erik | yet another ogre release |
| 16:09.35 | *** join/#brlcad PrezKennedyII (i=Matthew@whitecalf.net) | |
| 17:03.11 | *** join/#brlcad mafm (n=mafm@119.Red-81-34-12.dynamicIP.rima-tde.net) | |
| 17:32.08 | CIA-38 | BRL-CAD: 03davidloman * r37211 10/rt^3/trunk/ (9 files in 3 dirs): Drop 4 AbstractJob subclasses. |
| 17:41.55 | *** join/#brlcad PrezKennedy (i=Matthew@whitecalf.net) | |
| 18:00.40 | CIA-38 | BRL-CAD: 03davidloman * r37212 10/rt^3/trunk/include/GS/ (4 files in 2 dirs): JobManager/JobWorker work. |
| 18:55.36 | *** join/#brlcad __monty__ (n=toon@125.99-64-87.adsl-dyn.isp.belgacom.be) | |
| 19:03.55 | CIA-38 | BRL-CAD: 03bob1961 * r37213 10/brlcad/trunk/src/external/ProEngineer/win32-msvc8/ (4 files in 3 dirs): Add project for Wildfire 5.0 |
| 19:30.54 | starseeker | ``Erik: release candidate |
| 19:31.35 | CIA-38 | BRL-CAD: 03bob1961 * r37214 10/brlcad/trunk/src/libdm/dm-wgl.c: Added wgl_drawLine3D, wgl_drawLines3D and wgl_drawVListHiddenLine. |
| 19:32.22 | ``Erik | well, I saw the 1.6.5 and commented, saw the 1.7.0RC1 after digging in a bit |
| 19:35.00 | CIA-38 | BRL-CAD: 03bob1961 * r37215 10/brlcad/trunk/src/libdm/dm_obj.c: Updated dmo_drawDataAxes_tcl to use dm_draw_data_axes(). |
| 19:38.07 | CIA-38 | BRL-CAD: 03erikgreenwald * r37216 10/brlcad/trunk/src/librt/primitives/nmg/nmg_tri_mc.c: add dates, mark milestones, and check off done stuff in plan |
| 19:42.05 | CIA-38 | BRL-CAD: 03bob1961 * r37217 10/brlcad/trunk/src/libdm/axes.c: Using struct ged_data_axes_state instead of struct ged_axes_state. |
| 19:43.20 | CIA-38 | BRL-CAD: 03bob1961 * r37218 10/brlcad/trunk/ (7 files in 2 dirs): Added hidden line drawing. |
| 19:44.30 | CIA-38 | BRL-CAD: 03bob1961 * r37219 10/brlcad/trunk/include/solid.h: Added a flag for hidden line. |
| 19:47.47 | CIA-38 | BRL-CAD: 03bob1961 * r37220 10/brlcad/trunk/src/libged/ (draw.c ged_private.h): Added an option for drawing hidden lines. |
| 20:08.24 | CIA-38 | BRL-CAD: 03bob1961 * r37221 10/brlcad/trunk/ (include/ged.h src/libtclcad/ged_obj.c): Added support for data_arrows, data_axes, data_lines and data_labels. |
| 20:16.57 | CIA-38 | BRL-CAD: 03bob1961 * r37222 10/brlcad/trunk/src/tclscripts/lib/Ged.tcl: Added support for data_arrows, data_axes, data_lines and data_labels. |
| 20:18.37 | CIA-38 | BRL-CAD: 03bob1961 * r37223 10/brlcad/trunk/src/archer/plugins/Utility/attrGroupsDisplayUtilityP/AttrGroupsDisplayUtilityP.tcl: Minor mod. |
| 20:38.47 | CIA-38 | BRL-CAD: 03davidloman * r37224 10/rt^3/trunk/ (4 files in 2 dirs): More JobManager/JobWorker/AbstractJob work. |
| 20:44.25 | CIA-38 | BRL-CAD: 03bob1961 * r37225 10/brlcad/trunk/src/tclscripts/archer/images/Themes/ (6 files in 3 dirs): Added an image for component exclude. |
| 20:45.42 | CIA-38 | BRL-CAD: 03bob1961 * r37226 10/brlcad/trunk/src/tclscripts/archer/images/Themes/ (3 files in 3 dirs): Added an image for component exclude. |
| 20:45.58 | ``Erik | heh, src/conv/proe-g.c grabbing src/other/tcl/generic/regex.h on #include <regex.h> ... lame |
| 20:49.48 | CIA-38 | BRL-CAD: 03bob1961 * r37227 10/brlcad/trunk/src/tclscripts/archer/ArcherCore.tcl: Added setStatusString, colorMenuStatusCB, transparencyMenuStatusCB, initViewMeasure and endViewMeasure methods. |
| 21:03.17 | CIA-38 | BRL-CAD: 03bob1961 * r37228 10/brlcad/trunk/src/tclscripts/archer/Archer.tcl: Added global_undo_callback, modesMenuStatusCB, rtCheckMenuStatusCB, rtEdgeMenuStatusCB and rtMenuStatusCB |
| 21:05.42 | CIA-38 | BRL-CAD: 03bob1961 * r37229 10/brlcad/trunk/src/tclscripts/archer/AttrGroupsDisplayUtility.tcl: Added highlightSelectedAttr, selectHighlightedAttr, getAttrList, getSelectedAttr and selectCurrentGroup methods. |
| 21:39.16 | *** join/#brlcad Ralith (n=ralith@d142-058-080-041.wireless.sfu.ca) | |
| 22:21.47 | *** join/#brlcad iammaxus (n=chatzill@dhcp-8-196.media.mit.edu) | |
| 22:28.28 | CIA-38 | BRL-CAD: 03irpguardian * r37230 10/brlcad/trunk/src/rt/view.c: Starting to work on a heat-graph of the time it takes to compute pixels in a raytrace. |
| 23:06.02 | *** join/#brlcad Nohla (n=jesica@168.226.178.50) | |
| 23:11.35 | *** join/#brlcad talcite (n=matthew@dhcp-143-147.mcme-students.carleton.ca) | |
| 23:28.02 | Nohla | brlcad holas |
| 23:39.44 | *** join/#brlcad Ralith (n=ralith@69.90.48.97) | |