| 00:01.14 | brlcad | one of these if you need to borrow it, http://www.productwiki.com/upload/images/dewalt_dc385k.jpg |
| 00:04.41 | ``Erik | I have a fistful of smaller ones that do that kinda job, I have to cut a damage eastern in half and off at the roots :/ so I need a big tearing kinda saw |
| 00:05.23 | ``Erik | basically a vertical juniper bush, lots of branches tightly bundles and leaves |
| 00:05.29 | ``Erik | http://www.naturehills.com/images/productImages/Eastern_Red_Cedar_New_1.jpg |
| 00:27.02 | starseeker | brlcad: heh - he mentioned that he prefers it that way, and wasn't sure what you'd do |
| 01:21.22 | ``Erik | http://failbooking.com/2010/02/17/funny-facebook-fails-24-mall-edition/ nice. like an effin' zork walkthrough |
| 01:32.52 | *** join/#brlcad Nohla (~jesica@201.255.252.136) | |
| 02:24.16 | *** join/#brlcad Nohla (~jesica@201.255.213.142) | |
| 03:07.25 | *** join/#brlcad fredcylinder (~FredCylin@unaffiliated/fredcylinder) | |
| 03:07.46 | *** part/#brlcad fredcylinder (~FredCylin@unaffiliated/fredcylinder) | |
| 03:21.11 | *** join/#brlcad ``Erik_ (~erik@c-69-140-109-104.hsd1.md.comcast.net) | |
| 03:43.34 | starseeker | blinks - autotools completed without the problems observed earlier |
| 03:43.52 | starseeker | whadya know, all it needed was a total system redo on new hardware |
| 03:45.40 | brlcad | starseeker: I know he prefers it that way, he's been doing it for as long as I've known him |
| 03:45.52 | brlcad | I've been slowly undoing them :) |
| 03:46.51 | brlcad | they're a pita to read like that as an API, though there are some benefits to them as well |
| 03:46.54 | brlcad | it's a tradeoff |
| 03:47.06 | brlcad | bikeshed issue, not a big deal |
| 03:47.21 | starseeker | ah :-) |
| 03:47.55 | brlcad | ``Erik_: if you want me to bring it in, lemme know |
| 03:48.47 | starseeker | prepares to do his very first 64 bit build on a home machine :-) |
| 04:27.21 | starseeker | sweeet |
| 06:02.11 | brlcad | oof, he changed db_i |
| 06:15.35 | CIA-43 | BRL-CAD: 03brlcad * r37650 10/brlcad/trunk/src/librt/ (5 files in 4 dirs): quell verbose compilation warnings |
| 06:17.47 | *** join/#brlcad Stattrav (~Stattrav@202.3.77.132) | |
| 06:55.34 | CIA-43 | BRL-CAD: 03Sean 07http://brlcad.org * r2200 10/wiki/Projecto_VeRDE: add the interview responses that raquel responded to |
| 07:13.14 | CIA-43 | BRL-CAD: 03Sean 07http://brlcad.org * r2201 10/wiki/Projecto_VeRDE: reformat survey, add verbage to animation section so it formats up better |
| 07:15.09 | yukonbob | ^--- very cool. |
| 07:31.12 | CIA-43 | BRL-CAD: 03brlcad * r37651 10/brlcad/trunk/TODO: need a means (other than get/put) for creating and editing BoT meshes |
| 08:51.39 | CIA-43 | BRL-CAD: 03brlcad * r37652 10/brlcad/trunk/ (BUGS TODO): |
| 08:51.39 | CIA-43 | BRL-CAD: annotate two issues reported by Bob Anderson (SURVICE), one being a libged |
| 08:51.40 | CIA-43 | BRL-CAD: refactoring change where l and analyze no longer use the current highlight and |
| 08:51.40 | CIA-43 | BRL-CAD: require the user specify the primitive; the other is a bug where mged fails to |
| 08:51.40 | CIA-43 | BRL-CAD: shoot a ray from within mged after a region is modified. |
| 09:02.26 | CIA-43 | BRL-CAD: 03brlcad * r37653 10/brlcad/trunk/src/libbn/poly.c: merge the 'div' warning fix that couldn't be committed with other poly changes, by itself. |
| 09:04.17 | CIA-43 | BRL-CAD: 03brlcad * r37654 10/brlcad/trunk/src/librt/roots.c: merge the other 'div' warning fix that couldn't be committed quite yet. |
| 10:11.58 | *** join/#brlcad Nohla (~jesica@201.255.252.136) | |
| 10:22.09 | *** join/#brlcad Maloeran (~maloeran@glvortex.net) | |
| 10:58.16 | *** join/#brlcad Phurl (~mdupont@cl-1773.dus-01.de.sixxs.net) | |
| 11:49.33 | *** join/#brlcad ``Erik (~erik@c-69-140-109-104.hsd1.md.comcast.net) | |
| 13:07.10 | *** join/#brlcad Stattrav (~Stattrav@202.3.77.161) | |
| 13:45.08 | ``Erik | brlcad: nah, indianlarry is going to look to see if he has a bow saw handy, if not, I'll stop by sears and pick one up... this is shrubbery hacking, not making outlet holes in drywall :D and axe might be better suited than a saw like that O.o |
| 14:03.11 | *** join/#brlcad Stattrav (~Stattrav@202.3.77.161) | |
| 14:27.56 | brlcad | ``Erik: you sure? this thing is way more fun and faster than a bow saw... |
| 14:29.01 | brlcad | i've used it for cutting up 8" diameter fallen limbs |
| 15:19.00 | ``Erik | yeh, I'm sure, thanks though |
| 15:19.38 | starseeker | he's gonna get the exercise ;-) |
| 15:20.05 | starseeker | needs to train for cat juggling |
| 19:16.41 | CIA-43 | BRL-CAD: 03bob1961 * r37655 10/brlcad/trunk/src/libbu/brlcad_path.c: In bu_argv0_full_path(), check if argv0 is not NULL before using. |
| 20:08.59 | CIA-43 | BRL-CAD: 03bob1961 * r37656 10/brlcad/trunk/regress/weight.sh: Updates to the part that generates the weight.ref file. Theses changes correspond to a valid change to rtweight. |
| 20:26.21 | *** join/#brlcad Phurl_ (~mdupont@cl-1773.dus-01.de.sixxs.net) | |
| 21:22.10 | *** join/#brlcad R0b0t1 (~Enigma@unaffiliated/r0b0t1) | |
| 22:45.31 | CIA-43 | BRL-CAD: 03brlcad * r37657 10/brlcad/trunk/doc/deprecation.txt: deprecate the short-lived bu_argv0().. it's ill defined and provides somewhat overlapping functionality. |
| 22:46.17 | CIA-43 | BRL-CAD: 03brlcad * r37658 10/brlcad/trunk/include/raytrace.h: declare a soon-to-be-added db_tree_list() and db_tree_parse() to replace db_tcl_tree_describe() and db_tcl_tree_parse() respectively. |
| 22:49.35 | CIA-43 | BRL-CAD: 03brlcad * r37659 10/brlcad/trunk/include/bu.h: clarify the API noting that bu_which() and bu_whereis() will return null if they cannot find the executable, but bu_argv0() should never return NULL (and is now a deprecated interface). |
| 22:50.02 | CIA-43 | BRL-CAD: 03brlcad * r37660 10/brlcad/trunk/src/libbu/ (whereis.c which.c): return NULL, not zero, for the char* |
| 22:50.38 | CIA-43 | BRL-CAD: 03brlcad * r37661 10/brlcad/trunk/src/libbu/backtrace.c: call bu_argv0_full_path() instead of bu_argv0() since it's deprecated. |
| 22:51.15 | CIA-43 | BRL-CAD: 03brlcad * r37662 10/brlcad/trunk/src/libbu/crashreport.c: similarly, call bu_argv0_full_path() and bu_getprogname() instead of bu_argv0() since it's a deprecated interface. |
| 22:53.58 | CIA-43 | BRL-CAD: 03brlcad * r37663 10/brlcad/trunk/src/libbu/brlcad_path.c: make bu_argv0() be deprecated as a public interface. ensure that it never returns null and more consistently set program name to '(unknown)' if argv0 is not known. |
| 22:55.51 | CIA-43 | BRL-CAD: 03brlcad * r37664 10/brlcad/trunk/src/libbu/brlcad_path.c: make _bu_argv0() hidden and use it. |
| 22:57.01 | CIA-43 | BRL-CAD: 03brlcad * r37665 10/brlcad/trunk/src/mged/tedit.c: if we get this far down into the logic, we're already pretty much screwed. don't rely on bu_argv0(), just punt with the jove in the root. |
| 23:00.24 | CIA-43 | BRL-CAD: 03brlcad * r37666 10/brlcad/trunk/src/libtclcad/tclcadAutoPath.c: this sort of half-assery really is lame.. it's a steaming pile of unrelated shitcode right in the middle of a function. i mean, c'mon.. fix it right. |
| 23:02.05 | CIA-43 | BRL-CAD: 03brlcad * r37667 10/brlcad/trunk/src/librt/wdb.c: remove big dead code section. |
| 23:02.23 | CIA-43 | BRL-CAD: 03brlcad * r37668 10/brlcad/trunk/src/librt/db_comb.c: ws |
| 23:03.03 | CIA-43 | BRL-CAD: 03brlcad * r37669 10/brlcad/trunk/src/libbu/brlcad_path.c: _bu_argv0() no longer has the potential to return NULL |
| 23:09.27 | CIA-43 | BRL-CAD: 03brlcad * r37670 10/brlcad/trunk/src/librt/ (db5_comb.c db_tree.c tcl.c): |
| 23:09.27 | CIA-43 | BRL-CAD: remove all of the rt_comb_*() functions out of tcl and back over with other comb |
| 23:09.27 | CIA-43 | BRL-CAD: routines in db5_comb.c and db_tree.c; begin rewriting db_tcl_tree_describe() as |
| 23:09.27 | CIA-43 | BRL-CAD: db_tree_list() with the implementation NOT using a Tcl_DString. basic mirrored |
| 23:09.27 | CIA-43 | BRL-CAD: support for beginnging and ending a list scope are implemented along with a |
| 23:09.27 | CIA-43 | BRL-CAD: matching routine to determine if a space needs to be added. one piece |
| 23:09.28 | CIA-43 | BRL-CAD: remaining, to add a new element. |
| 23:11.56 | CIA-43 | BRL-CAD: 03brlcad * r37671 10/brlcad/trunk/ (BUGS TODO): link to randerson's sf bug and feature requests numbers. |
