| 01:14.33 | starseeker | vtts: rtedge |
| 03:43.26 | brlcad | starseeker: so good news is I figured out the cause for why the combination editor no longer works, bad news is it was the pacakge require replacements you put in leu of ITcl_Init() in mged's setup.c |
| 03:56.28 | CIA-14 | BRL-CAD: 03brlcad * r43737 10/brlcad/trunk/ (NEWS TODO src/mged/setup.c): |
| 03:56.29 | CIA-14 | BRL-CAD: fixed the combination editor. didn't achieve understanding into the underlying |
| 03:56.29 | CIA-14 | BRL-CAD: cause (left as an exercise to the reader), but changing Itcl_Init() to a |
| 03:56.29 | CIA-14 | BRL-CAD: 'package require Itcl' was not equivalent. iwidgets ends up attempting to |
| 03:56.29 | CIA-14 | BRL-CAD: create a class twice (LabeledFrame) causing a runtime error. changed back so |
| 03:56.29 | CIA-14 | BRL-CAD: release can progres. |
| 04:03.00 | CIA-14 | BRL-CAD: 03brlcad * r43738 10/brlcad/trunk/src/util/: rtwizard moved to tclscripts |
| 04:08.36 | CIA-14 | BRL-CAD: 03brlcad * r43739 10/brlcad/trunk/src/tclscripts/rtwizard/rtwizard.tcl: use the same initialization approach archer uses so rtwizard will run prior to installation |
| 04:19.24 | CIA-14 | BRL-CAD: 03brlcad * r43740 10/brlcad/trunk/src/bwish/ (cadAppInit.c main.c): |
| 04:19.24 | CIA-14 | BRL-CAD: same patch applied to mged for unbreaking the Combination Editor applies here. |
| 04:19.24 | CIA-14 | BRL-CAD: confirmed that archer and rtwizard were non-functional, would not start, due to |
| 04:19.24 | CIA-14 | BRL-CAD: multiple class errors. this reverts the package require back to an Itcl_Init(), |
| 04:19.24 | CIA-14 | BRL-CAD: itk too. archer/rtwizard now start up again. |
| 04:23.05 | brlcad | vtts: the bug you reported here is now fixed, thanks |
| 04:26.52 | CIA-14 | BRL-CAD: 03brlcad * r43741 10/brlcad/trunk/NEWS: (log message trimmed) |
| 04:26.53 | CIA-14 | BRL-CAD: may or may not be specific to Mac OS X, but the bug report and confirmation were |
| 04:26.53 | CIA-14 | BRL-CAD: both on Mac OS X. the bug prevented both archer and rtwizard (both bwish-based) |
| 04:26.53 | CIA-14 | BRL-CAD: from running. they'd abort out during initialization with a multiple class |
| 04:26.53 | CIA-14 | BRL-CAD: error. problem was isolated as a change to the way bwish initialized. thanks |
| 04:26.53 | CIA-14 | BRL-CAD: to vtts for reporting the related combination editor bug via IRC. Runtime |
| 04:26.54 | CIA-14 | BRL-CAD: release testing for the previous release presumably happened on Linux, so this |
| 04:30.52 | starseeker | is getting rather tired of Itcl/Itk |
| 04:31.04 | *** join/#brlcad brlcad (~sean@BZ.BZFLAG.BZ) | |
| 04:31.10 | brlcad | oops |
| 04:31.15 | starseeker | is getting rather tired of Itcl/Itk |
| 04:32.19 | brlcad | I presume those package require changes were tested on Linux? |
| 04:32.39 | starseeker | I've been using them to do everything for a while now |
| 04:32.58 | starseeker | Windows, Mac and Linux |
| 04:33.14 | brlcad | on Mac? rtwizard loads? |
| 04:33.33 | starseeker | dunno about rtwizard - will have to check tomorrow if I can make it in |
| 04:33.42 | starseeker | has a leak somewhere |
| 04:33.47 | brlcad | mged would start just fine, it wasn't until it hit a panel that used iwidgets |
| 04:33.49 | starseeker | basement carpet is wet |
| 04:33.55 | brlcad | fun! |
| 04:33.57 | brlcad | not |
| 04:34.07 | starseeker | and we found out one of our cats has gone blind |
| 04:34.13 | starseeker | this has been a real kicker of a weekend |
| 04:34.14 | brlcad | aw |
| 04:43.46 | CIA-14 | BRL-CAD: 03brlcad * r43742 10/brlcad/trunk/TODO: search seems to be working much better now, but noticed several non-critical test failures that current usage docs (and reasonable expectations) indicate they should work. most are pretty simple. |
| 07:10.55 | *** join/#brlcad ibot (~ibot@198.60.114.207) | |
| 07:10.55 | *** topic/#brlcad is BRL-CAD Open Source Solid Modeling || http://brlcad.org || http://sf.net/projects/brlcad || #brlcad logs: http://ibot.rikers.org/%23brlcad/ || BRL-CAD release prep for 7.18.2 under way (20110202) | |
| 09:06.27 | *** join/#brlcad epileg (~epileg@unaffiliated/epileg) | |
| 09:15.17 | *** join/#brlcad Stattrav (~Stattrav@117.192.250.99) | |
| 09:15.17 | *** join/#brlcad Stattrav (~Stattrav@unaffiliated/stattrav) | |
| 10:23.05 | *** join/#brlcad Stattrav (~Stattrav@122.172.203.101) | |
| 10:23.05 | *** join/#brlcad Stattrav (~Stattrav@unaffiliated/stattrav) | |
| 11:06.05 | dloman | yawns |
| 11:08.33 | dloman | So.... if a cmake find script isn't finding libraries... where should i put the paths to the libs? in PATH or LD_LIBRARY_PATH ? |
| 11:21.26 | Ralith | might as well try and see |
| 11:27.04 | *** join/#brlcad Stattrav (~Stattrav@117.192.225.133) | |
| 11:27.04 | *** join/#brlcad Stattrav (~Stattrav@unaffiliated/stattrav) | |
| 11:56.19 | *** join/#brlcad Stattrav (~Stattrav@117.192.238.155) | |
| 11:56.19 | *** join/#brlcad Stattrav (~Stattrav@unaffiliated/stattrav) | |
| 12:13.44 | starseeker | dloman: depends on the script |
| 12:13.49 | starseeker | which script is failing? |
| 12:19.21 | dloman | findqt |
| 12:19.38 | starseeker | try putting the bin directory that has the qt binaries in PATH |
| 12:19.39 | dloman | at i verified qt is in /usr/lib32 |
| 12:19.44 | dloman | right on |
| 12:19.49 | dloman | just sat back down |
| 12:19.54 | dloman | gonna try that very thing :) |
| 12:20.01 | starseeker | heh |
| 12:22.08 | dloman | so yeah.... lots of rain + sudden temp drop + stupid winds == nastly little mess up here. |
| 12:22.41 | dloman | one entire side of my jeep is coated in 1/2" of snow/ice stuff that's hard as a rock. |
| 12:22.48 | starseeker | ow |
| 12:22.50 | dloman | broke both my ice chippers on it. |
| 12:23.15 | starseeker | is trying to figure out where the water that soaked his closet carpet is coming from... |
| 12:23.35 | dloman | check the walls. |
| 12:23.42 | dloman | we just had a leak fixed. |
| 12:23.42 | starseeker | guessing either the roof finally gave up the ghost or a hole in the siding over the front door... |
| 12:23.54 | starseeker | walls are pretty dry |
| 12:24.00 | dloman | ours were too :) |
| 12:24.12 | dloman | leaking in the second story (of 3 stories) |
| 12:24.24 | dloman | was running down a beam or two in the main load bearing wall. |
| 12:24.28 | dloman | crazy |
| 12:24.38 | starseeker | dloman: who did you call to get it taken care of? |
| 12:24.57 | dloman | oh man. Its the contractor that originally put our roof on. |
| 12:25.08 | starseeker | ah |
| 12:25.11 | dloman | name is down stairs, but its a MD contractor |
| 12:25.28 | dloman | $200 min visit fee, but that covers 90% of leak fixes and shingle replacements. |
| 12:25.55 | starseeker | sounds interesting |
| 12:30.07 | dloman | ill dig up the name the next time I head downstairs. |
| 12:32.35 | starseeker | dloman: awesome, thanks |
| 12:36.34 | dloman | So who knew: Batman Begins score == great coding music :) |
| 12:37.01 | starseeker | hehe |
| 12:37.20 | starseeker | probably won't be in today, or if he is it'll be later |
| 12:37.41 | starseeker | need to schedule leak fix due and get dehumidifier rented |
| 12:47.21 | dloman | Cranford Contractors: 410 792 7663 |
| 12:47.40 | dloman | they got here pretty quick (2 day turnaround) considering all the wind we've been having lately |
| 12:48.02 | dloman | this is my first experience with them, but they seemed to have fixed up the roof pretty well. |
| 12:50.52 | starseeker | hmm... I probably need somebody to deal with siding as well as roof |
| 12:53.40 | dloman | ah bloody hell. |
| 12:53.52 | dloman | :/ gotta get QT. |
| 12:53.59 | starseeker | hehe |
| 12:54.17 | dloman | thought it was installed, but noooooo. nothing can be that easy |
| 12:55.28 | dloman | I so need an 8 core laptop..... |
| 13:12.38 | brlcad | PATH is binaries, LD_LIBRARY_PATH is libraries (for linux/bsd, not other platforms) |
| 13:13.17 | dloman | brlcad: kk awesome |
| 13:23.34 | dloman | hahaha, just a a film trailer for "Inner city vs Outer space" |
| 13:23.47 | dloman | street thugs vs space aliens |
| 13:23.54 | dloman | aaaahahahaha, i love it. |
| 13:24.06 | dloman | "Attack the Block" i think its called. |
| 14:38.20 | *** join/#brlcad ezzieyguywuf (~wolfie@unaffiliated/ezzieyguywuf) | |
| 14:42.36 | epileg | brlcad: actual trunk successfully compile in ubuntu and fedora, but i get errors in opensuse, and i'm a bit lost. Can You help me please? |
| 14:42.36 | epileg | http://paste.debian.net/109872/ |
| 15:08.37 | ezzieyguywuf | [10:08:27] IRCnet: irc.freenode.net:6667 (IRCnet) |
| 15:08.39 | ezzieyguywuf | whoops |
| 15:14.57 | CIA-14 | BRL-CAD: 03davidloman * r43743 10/geomcore/trunk/src/utility/ (Config.cxx GSUuid.cxx): Add some includes to make compiling on Ubuntu 10.10 work. |
| 15:21.33 | CIA-14 | BRL-CAD: 03davidloman * r43744 10/geomcore/trunk/ (2 files in 2 dirs): More includes to make compiling on Ubuntu 10.10 work. |
| 15:25.38 | CIA-14 | BRL-CAD: 03davidloman * r43745 10/geomcore/trunk/src/GS/GSClient.cxx: cast uint64_t to long long to make printf happy |
| 15:30.43 | CIA-14 | BRL-CAD: 03davidloman * r43746 10/geomcore/trunk/ (3 files in 2 dirs): Final round of adding includes to make compiling on Ubuntu 10.10 work. |
| 15:49.30 | CIA-14 | BRL-CAD: 03erikgreenwald * r43747 10/brlcad/trunk/misc/win32-msvc8/librt/librt.vcproj: add search.c |
| 16:12.37 | brlcad | epileg: sure, the key there is "warnings being treated as errors" |
| 16:13.21 | brlcad | so either "make STRICT_FLAGS=" or run configure with --disable-strict |
| 16:14.41 | epileg | ok, i'll try with "--disable-strict" |
| 16:31.24 | CIA-14 | BRL-CAD: 03brlcad * r43748 10/brlcad/trunk/src/libfb/tcl.c: expand the function declarations from K&R form to complete 'real' prototypes. these probably belong in a lifb_private.h header or (better) wrapped into a callback btable. |
| 16:31.46 | brlcad | that should quell the warning too |
| 16:41.08 | epileg | brlcad: solved! successfully compile and install on openSUSE |
| 16:42.34 | epileg | BTW I do not find the way to make an application as default for some mime-type in KDE. no problem in GNOME. Someone nows how to do it? |
| 16:42.46 | epileg | *knows |
| 16:50.36 | *** join/#brlcad Stattrav (~Stattrav@117.192.144.236) | |
| 16:50.36 | *** join/#brlcad Stattrav (~Stattrav@unaffiliated/stattrav) | |
| 17:03.13 | *** join/#brlcad Stattrav_ (~Stattrav@117.192.145.13) | |
| 17:11.23 | *** join/#brlcad Stattrav (~Stattrav@unaffiliated/stattrav) | |
| 17:30.51 | dloman | Is there a built in try/catch framework inside the TCL we use? |
| 17:40.24 | vtts | brlcad, thanks for the fix, just checked it, works like a charm |
| 17:43.54 | vtts | if you are in the mood, there is another one, with "archer -h": http://pastebin.com/unDAYkfJ |
| 17:44.17 | vtts | mac os x, r43748 build with --enable-all |
| 17:45.00 | vtts | although launching it with other options doesn't cause this |
| 17:45.47 | vtts | unfortunately i don't have ogl support, so cannot see anyting past the startup screen |
| 18:03.01 | *** join/#brlcad Stattrav_ (~Stattrav@117.192.142.105) | |
| 18:12.10 | *** join/#brlcad Stattrav (~Stattrav@117.192.137.168) | |
| 18:12.10 | *** join/#brlcad Stattrav (~Stattrav@unaffiliated/stattrav) | |
| 18:25.43 | ``Erik | well, poop, tcl ignores --disable-64bit-build |
| 18:35.13 | dloman | So it turns out that the Children of Dune OST is pretty darn good. |
| 18:41.15 | *** join/#brlcad Stattrav_ (~Stattrav@117.192.138.0) | |
| 18:51.14 | CIA-14 | BRL-CAD: 03davidloman * r43749 10/geomcore/trunk/src/libJob/JobManager.cxx: QT ripout cleanup: JobManager *should* start workers when JobManager::start() is called. |
| 18:57.43 | CIA-14 | BRL-CAD: 03brlcad * r43750 10/brlcad/trunk/BUGS: archer's kill command seems to be working better now |
| 18:59.04 | CIA-14 | BRL-CAD: 03brlcad * r43751 10/brlcad/trunk/TODO: write up a bunch of archer to-do tasks that are necessary before archer can go into beta (some are even alpha blockers). mostly focusing on usability and migration. |
| 19:01.33 | CIA-14 | BRL-CAD: 03davidloman * r43752 10/geomcore/trunk/ (include/AbstractJob.h src/libJob/AbstractJob.cxx): Wire UUIDs back into abstractjob. |
| 19:13.19 | CIA-14 | BRL-CAD: 03davidloman * r43753 10/geomcore/trunk/tests/libJob/ (BasicJMTest.cxx PrintToStdOutJob.cxx): Get BasicJMTest working again. |
| 19:15.04 | CIA-14 | BRL-CAD: 03davidloman * r43754 10/geomcore/trunk/tests/libJob/BasicJMTest.cxx: Bad Developer: Redundant delete calls for JM. Forgot to delete PrintToStdOutJob objects on exit. |
| 19:25.38 | CIA-14 | BRL-CAD: 03davidloman * r43755 10/geomcore/trunk/docs/CMakeLists-Template.txt: Drop template. Very outdated. |
| 19:29.11 | CIA-14 | BRL-CAD: 03davidloman * r43756 10/geomcore/trunk/tests/coreInterface/: Drop coreInterface test ....dunno how I missed removing this earlier. |
| 19:30.35 | CIA-14 | BRL-CAD: 03davidloman * r43757 10/geomcore/trunk/tests/ (libEvent/BasicEventTest.cxx libNet/PrintingMsgHandler.h): Remove a few lingering QT ghosts |
| 19:34.46 | CIA-14 | BRL-CAD: 03davidloman * r43758 10/geomcore/trunk/src/ (CMakeLists.txt adminpanel/): Drop Adminpanel. Old research project that is no longer useful. |
| 19:36.53 | CIA-14 | BRL-CAD: 03davidloman * r43759 10/geomcore/trunk/include/ (AppLauncher.h BaseApp.h): Drop unused application launch framework. |
| 19:37.36 | CIA-14 | BRL-CAD: 03davidloman * r43760 10/geomcore/trunk/src/libJob/ (JobWorker.cxx JobWorker.h): Remove a few more lingering QT ghosts |
| 19:43.14 | CIA-14 | BRL-CAD: 03davidloman * r43761 10/geomcore/trunk/CMakeLists.txt: Remove CMake's search for QT. ....and with that, Geomcore is 100% qt free. |
| 19:43.45 | brlcad | woot |
| 19:44.03 | brlcad | horay for simplified dependency management ;) |
| 19:46.47 | CIA-14 | BRL-CAD: 03brlcad * r43762 10/brlcad/trunk/src/librt/primitives/nmg/nmg.c: unnecessary cast |
| 19:48.05 | ``Erik | adminpanel doesn't require qt? or is it not part? |
| 19:48.32 | dloman | it was a research thingy |
| 19:48.39 | dloman | already been superseded |
| 19:48.48 | dloman | so i just deleted it. |
| 19:49.43 | ``Erik | aight, cool.. saw some gui pieces, so I wasn't touching it |
| 19:54.54 | dloman | ``Erik: starseeker thanks for all the help! |
| 19:57.33 | starseeker | that reminds me - the assembly and region trial on Friday succeed in something like 30 seconds as opposed to 5 minutes for havoc |
| 19:59.08 | starseeker | dloman: you're welcome :-) |
| 20:01.14 | starseeker | brlcad: are you volunteering to make new icons? :-P |
| 20:01.15 | CIA-14 | BRL-CAD: 03jordisayol * r43763 10/brlcad/trunk/misc/debian/brlcad.sh: add brlcad man path to manpath env. variable in GNU/Linux |
| 20:25.12 | *** join/#brlcad ezzieyguywuf (~wolfie@cpe-071-070-255-232.nc.res.rr.com) | |
| 20:43.37 | *** join/#brlcad Stattrav (~Stattrav@117.192.129.10) | |
| 20:43.37 | *** join/#brlcad Stattrav (~Stattrav@unaffiliated/stattrav) | |
| 20:48.41 | brlcad | starseeker: if it's holding up beta, sure |
| 20:48.57 | brlcad | that one isn't an alpha hold-up, but should be fixed by beta |
| 20:49.51 | starseeker | <PROTECTED> |
| 20:50.10 | CIA-14 | BRL-CAD: 03erikgreenwald * r43764 10/brlcad/trunk/src/librt/primitives/bot/tie_kdtree.c: clean up #if0 blocks, commented out printfs, etc |
| 20:50.11 | starseeker | those were mostly just "better than grey pixels" |
| 20:54.37 | brlcad | I noticed that there were a bunch of icons missing, I only listed the few that had some bigger issue |
| 20:55.29 | brlcad | isolates the nmg bug down to ~100 lines |
| 21:01.52 | yukonbob1 | brlcad: what's the script and what are it's requirements (ie: needs certain database, certain brl-cad version, certain env?) |
| 21:11.40 | brlcad | yukonbob1: it's our tcl test suite |
| 21:11.55 | brlcad | runs hundreds of commands through mged |
| 21:12.20 | brlcad | one of the hundreds is crashing, and it wasn't immediately obvious which one exactly |
| 21:25.06 | *** join/#brlcad Ralith (~ralith@d142-58-35-248.burnaby.sfu.ca) | |
| 21:33.37 | *** part/#brlcad epileg (~epileg@unaffiliated/epileg) | |
| 21:36.43 | yukonbob1 | brlcad: ah -- is this only w/ most recent versions of brl-cad, or would I be able to witness w/ 7.18.0 |
| 21:36.47 | yukonbob1 | ? |
| 21:41.45 | brlcad | it's been in there for over a year, it's part of our regression testing |
| 21:41.50 | starseeker | brlcad: missing? you mean primitives without icons? |
| 21:43.00 | brlcad | yeah |
| 21:43.31 | brlcad | e.g., not a big deal that rpp doesn't have an icon |
| 21:43.37 | starseeker | ah |
| 21:44.01 | brlcad | expecially since it'd then have to be rectified against arb8's icon since they'd look identical |
| 21:44.05 | starseeker | tried to at least get something for most of the significant ones, although adimttedly some of them suck... |
| 21:44.46 | brlcad | I was just listing the things that might affect release, not a critique or comment on the progress made to great |
| 21:44.56 | brlcad | to *date .. great stuff |
| 21:45.16 | starseeker | nods - we really need a proper graphic artist for "release quality" graphics |
| 21:45.27 | starseeker | that's a skill all its own |
| 21:45.51 | brlcad | since we were talking about release issues the other day, I thought I'd offload several things that I've noticed |
| 21:47.29 | starseeker | cool - thanks! |
| 21:47.30 | brlcad | making proper graphics isn't hard - you just have to be hyper observant, obsessive attention to detail, or decent amount of experience |
| 21:47.38 | starseeker | now if only we could get time to work on them... |
| 21:48.25 | brlcad | yep |
| 21:48.43 | brlcad | it takes a long time to make good graphics |
| 21:49.37 | brlcad | coders undervalue graphics designers (oh that's easy, just takes a couple hours..) as often as managers undervalue coders (oh that's easy, just takes a couple days) |
| 21:50.12 | CIA-14 | BRL-CAD: 03starseeker * r43765 10/brlcad/branches/cmake/ (27 files in 15 dirs): MFC r43764 |
| 21:52.52 | *** join/#brlcad indianlarry (~indianlar@BZ.BZFLAG.BZ) | |
| 21:55.16 | starseeker | brlcad: I don't suppose we can bsd license common.h by any chance? |
| 22:00.08 | *** join/#brlcad ibot (~ibot@rikers.org) | |
| 22:00.08 | *** topic/#brlcad is BRL-CAD Open Source Solid Modeling || http://brlcad.org || http://sf.net/projects/brlcad || #brlcad logs: http://ibot.rikers.org/%23brlcad/ || BRL-CAD release prep for 7.18.2 under way (20110202) | |
| 22:22.21 | CIA-14 | BRL-CAD: 03brlcad * r43766 10/brlcad/trunk/src/librt/ (Makefile.am primitives/nmg/nmg.c): partial revert of the ntohl/htonl conversions made to NMG since they cause a crash. turn off strict since we're temporarily reverting back to bu xdr routines. |
| 22:23.08 | starseeker | brlcad: after release, do you mind if I try to straighten out whatever the issue was with package require Itcl and go back to that approach? |
| 22:23.38 | starseeker | is taking a stab at updating the CMake logic for current code and now remembers why he went the other route... |
| 22:27.09 | brlcad | starseeker: there's not really copyright-worthy in common.h, at least nothing I'd worry about reusing on a whim :) |
| 22:27.21 | starseeker | ah, cool :-) |
| 22:27.39 | starseeker | will need the UNUSED macro or something like it to make openNURBS happy with strict flags... |
| 22:28.02 | brlcad | starseeker: you can sort it out before or after the release (preferably on a platform where you can reproduce), the issue was really just getting back to a stable point |
| 22:28.21 | starseeker | nods - I'll wait for now |
| 22:28.32 | brlcad | i have my suspicion as to the cause |
| 22:28.43 | starseeker | what's that? |
| 22:28.46 | brlcad | it's double declaration of classes |
| 22:28.53 | brlcad | so basically inconsistency |
| 22:28.57 | starseeker | ah |
| 22:29.03 | brlcad | I think you just didn't take it far enough |
| 22:29.14 | brlcad | you make itcl and itk package require but not iwidgets |
| 22:29.29 | brlcad | so iwidgets was static loaded, but the other two not |
| 22:29.31 | starseeker | O.o |
| 22:29.45 | brlcad | so something went awry in tcl's book-keeping of what is loaded |
| 22:29.47 | starseeker | I didn't realize there was a library to be statically loaded with iwidgets |
| 22:29.59 | starseeker | thought it was just a bunch of tcl scripts |
| 22:30.19 | brlcad | it is |
| 22:30.37 | brlcad | but it does a Tcl_Import of iwidgets |
| 22:30.50 | starseeker | ahhh |
| 22:31.14 | brlcad | I don't know -- I could be way off, but that's something that came to mind |
| 22:31.33 | starseeker | wonders how the heck it works for him... |
| 22:31.44 | brlcad | should frankly be able to remove itcl/itk/iwidgets from bwish/mged |
| 22:31.54 | brlcad | make the scripts package require correctly |
| 22:32.16 | starseeker | oh, you mean do it "normally" in the src/tclscripts files? |
| 22:32.25 | brlcad | right |
| 22:32.52 | brlcad | there's no benefit for the cad commands to be auto-loaded on instantiation of an interpreter |
| 22:33.00 | brlcad | I mean, no major one at least |
| 22:36.11 | starseeker | should be fair to package require BRL-CAD or some such... |
| 22:38.29 | CIA-14 | BRL-CAD: 03brlcad * r43767 10/brlcad/trunk/src/fbed/Makefile.am: per-target cppflags wasn't added until 1.7+ so use AM_CPPFLAGS instead |
| 22:42.35 | starseeker | rtwizard runs here - I wonder if that's due to the screwy install setup I have... |
| 22:48.36 | starseeker | brlcad: remind me why we're importing itcl/itk/iwidgets into the global namespace? |
| 22:49.33 | brlcad | better question is what will break if we don't import it, and that I do not know |
| 22:49.49 | starseeker | hmm |
| 22:50.28 | brlcad | plenty broke from what should have been an equivalent change ;) |
| 22:52.53 | starseeker | Oh, I wasn't planning on doing it now :-P |
| 22:53.03 | starseeker | we have enough release problems without borrowing more |
| 22:53.29 | starseeker | I'd just really like to get to where our Tcl/Tk stuff isn't so cranky and fragile anymore |
| 22:54.57 | starseeker | O.o I can't reproduce the failure here - what platform did you see it on? |
| 22:57.04 | brlcad | mac, 10.6 |
| 22:57.25 | brlcad | vtts was also on mac iirc, dunno which version |
| 22:57.48 | brlcad | mine is usually an enable-all build for testing |
| 23:18.28 | brlcad | starseeker: when you wrote the tcl mged tests .. what state did you leave them in? |
| 23:18.43 | brlcad | i.e., were they working? |
| 23:23.18 | starseeker | at the time they were, I believe |
| 23:23.25 | starseeker | that was a long time ago |
| 23:23.50 | starseeker | Pro/Batch sucks |
| 23:24.40 | brlcad | interesting |
| 23:25.06 | brlcad | because I got a magic bomb translating halfspaces, null parameter, that I can't see having ever worked |
| 23:26.16 | starseeker | huh |
| 23:26.34 | starseeker | shrugs - I may have messed it up somehow |
| 23:27.26 | brlcad | no no |
| 23:27.33 | brlcad | the problem was in librt |
| 23:28.01 | starseeker | oh, you mean an actual problem with the halfspace, not the test scripts? |
| 23:28.12 | brlcad | I added the support, I just don't see how translating a half ever worked with the out pointer was null |
| 23:28.18 | brlcad | right |
| 23:39.21 | brlcad | hm, well that's positive.. seems to be crashing on linux too |
| 23:39.37 | brlcad | starseeker: if you have a build, can you test what make test in regress/mged does? |
| 23:43.31 | CIA-14 | BRL-CAD: 03brlcad * r43768 10/brlcad/trunk/src/librt/primitives/half/half.c: how did this ever work? if the out pointer is null, we need to initialize and create one. nearly identical to what extrude does now. |
| 23:43.43 | starseeker | um... need to make an autotools build, one sec |
| 23:45.32 | brlcad | try without that change first |
| 23:45.35 | CIA-14 | BRL-CAD: 03starseeker * r43769 10/brlcad/branches/cmake/src/ (bwish/cadAppInit.c bwish/main.c mged/cmd.c mged/setup.c): CMake branch isn't set up to build with itcl/itk C api - need to resolve the package require issues. |
| 23:45.43 | starseeker | k |
| 23:48.16 | starseeker | brlcad: when rtwizard is crashing, is it from an installed location or the build dir? |
| 23:49.17 | starseeker | heh - just noticed, shapelib is actually an lgpl dependency |
| 23:49.25 | starseeker | looks like our first |
| 23:54.13 | starseeker | interesting - comb.tcl already has a package require Iwidgets |
| 23:54.21 | brlcad | starseeker: actually it's dual-licensed |
| 23:54.22 | brlcad | MIT |
| 23:54.29 | starseeker | ah, cool |
| 23:54.44 | brlcad | an odd dual-license, but I wasn't going to complain |
| 23:54.46 | starseeker | wonders what the point of a dual LGPL/MIT license is... |
| 23:55.16 | starseeker | autotools build clunking along |
| 23:55.31 | starseeker | will have to remember how to run those tests again - completely forgotten |
| 23:56.55 | brlcad | cd regress/mged && make test :) |
| 23:56.56 | starseeker | iirc, I had notions of replacing the sh regression logic with tcl regression logic for cross-platform compatibility... |
| 23:57.04 | starseeker | oh, I got it that far? cool |
| 23:57.19 | brlcad | looks like my linux failure has been fixed with recent changes |
| 23:57.55 | starseeker | rtwizard appears to have package require calls too |
| 23:58.48 | starseeker | somewhat bemusingly, I don't see such a call in archer |
| 23:59.46 | brlcad | iirc, my rtwizard invoke was pre-install |