| 01:45.37 | *** join/#brlcad abhi2011 (~chatzilla@117.200.83.94) | |
| 07:20.18 | *** join/#brlcad abhi2011 (~chatzilla@117.200.83.219) | |
| 10:29.56 | cvds_ | just omitting the 2 arb6 and just use and arb8 as the center part makes it a lot easier |
| 11:47.30 | *** join/#brlcad abhi2011 (~chatzilla@117.200.83.227) | |
| 11:56.43 | *** join/#brlcad hackrat (~packrator@c-98-209-146-133.hsd1.mi.comcast.net) | |
| 12:34.58 | *** join/#brlcad packrat (~packrator@c-98-209-146-133.hsd1.mi.comcast.net) | |
| 12:55.05 | *** join/#brlcad hackrat (~packrator@c-98-209-146-133.hsd1.mi.comcast.net) | |
| 13:24.07 | *** join/#brlcad jordisayol (~jordisayo@unaffiliated/jordisayol) | |
| 13:39.45 | ``Erik | starseeker: no... 3840x2400, impressive... wiki page says it's several dvi plugs striped together, the 221 has linux drivers, even... just make sure you have enough DVI out ports to drive it? *shrug* |
| 13:42.49 | ``Erik | (204dpi, not bad at all... overkill, even... human discrepency is roughly 287 dpi at 1' distance, iphone4 is 324dpi, average monitor I believe is 72dpi...) |
| 14:26.27 | starseeker | nods - I'm thinking at 204ppi, I'd never need another monitor until it died for some reason :-) |
| 14:26.41 | starseeker | (or I couldn't connect it to modern hardware, I suppose...) |
| 14:27.21 | starseeker | had better not die, considering they don't make 'em anymore... grr |
| 14:28.21 | starseeker | basically the monitor equalivent to my Model M keyboard :-) |
| 14:29.16 | cvds_ | Model M that is a good keyboard |
| 14:30.13 | starseeker | still has and uses an original - probably will have to switch to one of the newer ones I got a while back because they're discontinuing the old-style connectors and this sucker draws too much power for a USB plug |
| 15:11.02 | *** join/#brlcad merzo (~merzo@42-90-132-95.pool.ukrtel.net) | |
| 17:05.54 | *** join/#brlcad abhi2011 (~chatzilla@117.200.80.176) | |