| 00:07.44 | louipc | steve jobs must be rolling in his grave |
| 01:09.47 | *** join/#brlcad hsrai (~tcc@202.164.53.117) | |
| 01:45.07 | *** join/#brlcad hsrai (~tcc@202.164.53.117) | |
| 02:10.59 | *** join/#brlcad hsrai (~tcc@202.164.53.117) | |
| 03:04.56 | starseeker | MakerSlide -- Open Source Linear Bearing System - http://makerslide.com/ |
| 03:05.10 | starseeker | has a couple step files, CC licensed |
| 06:54.00 | *** join/#brlcad andrei (~andrei@79.118.113.219) | |
| 08:11.23 | *** join/#brlcad stas (~stas@188.24.45.30) | |
| 09:19.47 | CIA-23 | BRL-CAD: 03phoenixyjll * r51882 10/brlcad/trunk/src/librt/primitives/brep/brep.cpp: Add trims, vertices, edges, etc. to the b-rep structure and check its validity. |
| 09:19.58 | CIA-23 | BRL-CAD: 03Phoenix 07http://brlcad.org * r4306 10/wiki/User:Phoenix/GSoc2012/Reports: /* Week 12 */ |
| 10:24.06 | *** join/#brlcad stas (~stas@82.208.133.12) | |
| 11:58.45 | CIA-23 | BRL-CAD: 03bob1961 * r51883 10/brlcad/trunk/src/libged/edpipe.c: ged_move_pipept() now expects the passed in point to be in local units. This fixes an error in Archer that shows up when trying to move a pipe point in a database that has the units set to something other than mm. |
| 12:25.00 | CIA-23 | BRL-CAD: 03bob1961 * r51884 10/brlcad/trunk/src/libged/edpipe.c: ged_move_pipept was using the wrong argv item for the "bad pipe segment index" error message. |
| 13:17.11 | CIA-23 | BRL-CAD: 03bob1961 * r51885 10/brlcad/trunk/src/tclscripts/archer/ArcherCore.tcl: Fixed typo in ArcherCore::shootRay. |
| 13:49.30 | CIA-23 | BRL-CAD: 03carlmoore * r51886 10/brlcad/trunk/sh/ws.sh: remove 'f' because of the preceding comment -- undoing mistaken change I made |
| 13:55.56 | *** join/#brlcad cristina (~quassel@86.127.164.155) | |
| 13:57.04 | CIA-23 | BRL-CAD: 03carlmoore * r51887 10/brlcad/trunk/misc/nsis/brlcad.nsi: remove trailing blanks |
| 13:59.32 | CIA-23 | BRL-CAD: 03carlmoore * r51888 10/brlcad/trunk/misc/CMake/tcltest.tcl.in: remove trailing blank |
| 14:01.29 | CIA-23 | BRL-CAD: 03carlmoore * r51889 10/brlcad/trunk/doc/docbook/README: remove trailing blanks |
| 14:02.42 | CIA-23 | BRL-CAD: 03carlmoore * r51890 10/brlcad/trunk/doc/docbook/fop.xconf.in: remove trailing blanks |
| 15:07.24 | CIA-23 | BRL-CAD: 03bob1961 * r51891 10/brlcad/trunk/src/tclscripts/archer/Archer.tcl: Fixed a problem that occurs when moving pipe points in Archer. |
| 17:25.28 | *** join/#brlcad ksuzee (~ksu@193.151.105.83) | |
| 18:10.24 | CIA-23 | BRL-CAD: 03Ksuzee 07http://brlcad.org * r4307 10/wiki/User:Ksuzee/Reports: /* 12 week */ |
| 19:08.14 | CIA-23 | BRL-CAD: 03carlmoore * r51892 10/brlcad/trunk/misc/macosx/openUp.c: remove trailing blanks |
| 19:11.15 | CIA-23 | BRL-CAD: 03carlmoore * r51893 10/brlcad/trunk/m4/ax_boost_base.m4: remove trailing blanks/tabs |
| 19:12.10 | CIA-23 | BRL-CAD: 03carlmoore * r51894 10/brlcad/trunk/sh/orbit.sh: remove trailing tab |
| 19:13.15 | CIA-23 | BRL-CAD: 03carlmoore * r51895 10/brlcad/trunk/sh/trimconfig.sh: remove trailing blanks/tabs |
| 19:18.24 | CIA-23 | BRL-CAD: 03carlmoore * r51896 10/brlcad/trunk/sh/ws.sh: remove trailing tabs -- the omitted 'f' STAYS omitted! |
| 19:19.36 | CIA-23 | BRL-CAD: 03carlmoore * r51897 10/brlcad/trunk/misc/CMake/BRLCAD_Options.cmake: remove trailing blanks/tabs |
| 19:21.53 | CIA-23 | BRL-CAD: 03carlmoore * r51898 10/brlcad/trunk/misc/CMake/FindTCL.cmake: remove trailing blanks/tabs, and fix 2 spellings |
| 19:23.28 | CIA-23 | BRL-CAD: 03carlmoore * r51899 10/brlcad/trunk/misc/CMake/FindYACC.cmake: remove trailing blanks/tabs |
| 19:26.49 | CIA-23 | BRL-CAD: 03carlmoore * r51900 10/brlcad/trunk/misc/CMake/NSIS.template.in: remove trailing blanks/tabs, and fix spellings |
| 19:28.00 | CIA-23 | BRL-CAD: 03carlmoore * r51901 10/brlcad/trunk/misc/CMake/ThirdParty_TCL.cmake: remove trailing blanks/tabs, and fix 1 spelling |
| 19:29.16 | CIA-23 | BRL-CAD: 03carlmoore * r51902 10/brlcad/trunk/src/adrt/load_g.c: remove trailing blanks/tabs |
| 19:30.54 | CIA-23 | BRL-CAD: 03carlmoore * r51903 10/brlcad/trunk/src/fbed/fbed.c: remove trailing blanks/tabs |
| 19:33.02 | CIA-23 | BRL-CAD: 03carlmoore * r51904 10/brlcad/trunk/src/libbu/sscanf.c: remove trailing blanks/tabs and fix spellings |
| 19:34.15 | CIA-23 | BRL-CAD: 03carlmoore * r51905 10/brlcad/trunk/src/libfb/if_remote.c: remove trailing blanks/tabs |
| 19:37.12 | CIA-23 | BRL-CAD: 03carlmoore * r51906 10/brlcad/trunk/src/libged/brep.c: remove trailing blanks/tabs and fix 'doesnt' remarks |
| 19:39.23 | CIA-23 | BRL-CAD: 03carlmoore * r51907 10/brlcad/trunk/src/liboptical/liboslrend.cpp: remove trailing blanks/tabs |
| 19:41.14 | CIA-23 | BRL-CAD: 03carlmoore * r51908 10/brlcad/trunk/src/liboptical/sh_osl.cpp: remove trailing blanks/tabs, and fix 1 spelling in a comment |
| 19:42.41 | CIA-23 | BRL-CAD: 03carlmoore * r51909 10/brlcad/trunk/src/tclscripts/rtwizard/rtwizard.tcl: remove trailing blanks/tabs, and fix a spelling |
| 19:44.30 | CIA-23 | BRL-CAD: 03carlmoore * r51910 10/brlcad/trunk/src/liborle/rle.c: remove trailing blanks/tabs and fix a spelling |
| 19:45.29 | *** join/#brlcad andrei (andrei@79.118.113.219) | |
| 19:45.32 | CIA-23 | BRL-CAD: 03carlmoore * r51911 10/brlcad/trunk/src/libpc/pcConstraint.cpp: remove trailing blanks/tabs |
| 19:46.41 | CIA-23 | BRL-CAD: 03carlmoore * r51912 10/brlcad/trunk/src/libpc/pcMathVM.cpp: remove trailing blanks/tabs, and fix a spelling |
| 19:48.53 | CIA-23 | BRL-CAD: 03carlmoore * r51913 10/brlcad/trunk/src/libpc/pcMathVM.h: remove trailing blanks/tabs and fix spellings |
| 19:49.53 | CIA-23 | BRL-CAD: 03carlmoore * r51914 10/brlcad/trunk/src/libpc/pcSolver.h: remove trailing blanks/tabs |
| 19:51.58 | CIA-23 | BRL-CAD: 03carlmoore * r51915 10/brlcad/trunk/ (3 files in 3 dirs): remove trailing blanks/tabs and fix spelling |
| 20:06.08 | CIA-23 | BRL-CAD: 03carlmoore * r51916 10/brlcad/trunk/src/libtclcad/tclcad_obj.c: remove trailing blanks/tabs and fix spellings |
| 20:08.06 | CIA-23 | BRL-CAD: 03carlmoore * r51917 10/brlcad/trunk/src/mged/chgview.c: remove trailing tab |
| 20:09.31 | CIA-23 | BRL-CAD: 03carlmoore * r51918 10/brlcad/trunk/src/mged/tedit.c: remove trailing blanks/tabs and fix spelling |
| 20:11.00 | CIA-23 | BRL-CAD: 03carlmoore * r51919 10/brlcad/trunk/src/rt/main.c: remove trailing tab |
| 20:19.22 | CIA-23 | BRL-CAD: 03carlmoore * r51920 10/brlcad/trunk/src/rt/view.c: remove trailing blanks/tabs and fix spelling |
| 20:20.54 | CIA-23 | BRL-CAD: 03carlmoore * r51921 10/brlcad/trunk/src/rt/worker.c: remove trailing blanks/tabs and fix spelling |
| 20:21.54 | CIA-23 | BRL-CAD: 03carlmoore * r51922 10/brlcad/trunk/src/shapes/coil.c: remove trailing blanks/tabs, and fix 1 spelling |
| 20:23.20 | CIA-23 | BRL-CAD: 03carlmoore * r51923 10/brlcad/trunk/src/tclscripts/man_browser.tcl: remove trailing blanks/tabs |
| 20:25.00 | CIA-23 | BRL-CAD: 03carlmoore * r51924 10/brlcad/trunk/src/util/pix-png.c: remove trailing blanks/tabs |
| 20:26.07 | CIA-23 | BRL-CAD: 03carlmoore * r51925 10/brlcad/trunk/doc/docbook/books/README: remove trailing blanks/tabs |
| 20:26.48 | CIA-23 | BRL-CAD: 03carlmoore * r51926 10/brlcad/trunk/src/conv/intaval/write_brl.cpp: remove trailing tab |
| 20:30.09 | CIA-23 | BRL-CAD: 03carlmoore * r51927 10/brlcad/trunk/src/external/ProEngineer/proe-brl.c: remove trailing blanks/tabs and fix spelling |
| 20:33.03 | CIA-23 | BRL-CAD: 03carlmoore * r51928 10/brlcad/trunk/src/other/hv3/combobox.tcl: remove trailing blanks/tabs & change ie to i.e. & fix spelling |
| 20:37.09 | CIA-23 | BRL-CAD: 03carlmoore * r51929 10/brlcad/trunk/src/other/incrTcl/ChangeLog: remove trailing blanks/tabs; fix spellings (make sure I changed no comments' meanings) |
| 20:43.46 | CIA-23 | BRL-CAD: 03carlmoore * r51930 10/brlcad/trunk/src/other/iwidgets/CHANGES: remove trailing blanks/tabs & fix spelling including that of 'disabledforeground' in comments |
| 20:47.30 | CIA-23 | BRL-CAD: 03carlmoore * r51931 10/brlcad/trunk/src/other/iwidgets/ChangeLog: remove trailing blanks/tabs and fix spellings including changing '-oritent' to '-orient' |
| 20:49.07 | CIA-23 | BRL-CAD: 03carlmoore * r51932 10/brlcad/trunk/src/other/openNURBS/opennurbs.h: remove trailing blanks & tabs, and fix spellings |
| 20:50.27 | CIA-23 | BRL-CAD: 03carlmoore * r51933 10/brlcad/trunk/src/other/openNURBS/opennurbs_3dm.h: remove trailing blanks/tabs, fix spellings |
| 20:51.34 | CIA-23 | BRL-CAD: 03carlmoore * r51934 10/brlcad/trunk/src/other/openNURBS/opennurbs_3dm_attributes.cpp: remove trailing blanks/tabs, fix spelling |
| 20:57.50 | CIA-23 | BRL-CAD: 03carlmoore * r51935 10/brlcad/trunk/src/other/openNURBS/opennurbs_3dm_attributes.h: remove trailing blanks/tabs, fix spelling |
| 20:58.52 | CIA-23 | BRL-CAD: 03carlmoore * r51936 10/brlcad/trunk/src/other/openNURBS/opennurbs_3dm_properties.cpp: remove trailing blanks/tabs, and fix spelling |
| 21:00.51 | CIA-23 | BRL-CAD: 03carlmoore * r51937 10/brlcad/trunk/src/other/openNURBS/opennurbs_3dm_properties.h: remove trailing blanks/tabs and fix spelling |
| 21:02.37 | CIA-23 | BRL-CAD: 03carlmoore * r51938 10/brlcad/trunk/src/other/openNURBS/opennurbs_3dm_settings.cpp: remove trailing blanks/tabs and fix spelling |
| 21:04.11 | CIA-23 | BRL-CAD: 03carlmoore * r51939 10/brlcad/trunk/src/other/openNURBS/opennurbs_3dm_settings.h: remove trailing blanks/tabs & fix spelling |
| 21:14.40 | CIA-23 | BRL-CAD: 03carlmoore * r51940 10/brlcad/trunk/src/other/openNURBS/opennurbs_annotation.cpp: remove trailing blanks/tabs and fix a spelling |
| 21:15.57 | CIA-23 | BRL-CAD: 03carlmoore * r51941 10/brlcad/trunk/src/other/openNURBS/opennurbs_annotation.h: remove trailing blanks/tabs and fix spellings |
| 21:18.24 | CIA-23 | BRL-CAD: 03carlmoore * r51942 10/brlcad/trunk/src/other/openNURBS/opennurbs_annotation2.cpp: remove trailing blanks/tabs and fix spelling and remove a period |
| 21:20.19 | CIA-23 | BRL-CAD: 03carlmoore * r51943 10/brlcad/trunk/src/other/openNURBS/opennurbs_annotation2.h: remove trailing blanks/tabs & fix spellings |
| 21:20.41 | CIA-23 | BRL-CAD: 03r_weiss * r51944 10/brlcad/trunk/ (include/bn.h src/libbn/plane.c): Added a new function to libbn called "bn_lseg3_lseg3_parallel". This function tests for parallel line segments without using the dot product. |
| 21:21.16 | CIA-23 | BRL-CAD: 03carlmoore * r51945 10/brlcad/trunk/src/other/openNURBS/opennurbs_arc.cpp: remove trailing blanks/tabs and fix spelling |
| 21:21.55 | *** join/#brlcad louipc (~louipc@archlinux/fellow/louipc) | |
| 21:27.11 | CIA-23 | BRL-CAD: 03r_weiss * r51946 10/brlcad/trunk/src/libged/bot_fuse.c: Added function "_ged_show_dangling_edges" to file "bot_fuse.c" within libged. This function will display open edges within NMG objects. |
| 23:06.17 | *** join/#brlcad stas (~stas@188.24.33.151) | |
| 23:49.52 | CIA-23 | BRL-CAD: 03r_weiss * r51947 10/brlcad/trunk/src/libged/bot_fuse.c: Code cleanup to fix compile errors. |