IRC log for #brlcad on 20121207

00:40.22 Notify 03GCI: Glass: Find, reliably reproduce, and report any bug in Archer - Contact Hi Sean. I was wondering if there was a way to contact you other than these comments. Do you have an IRC that we can talk on? http://www.google-melange.com/gci/task/view/google/gci2012/8027205
01:22.31 Notify 03GCI: Willie Zhu: Implement a primitive volume function ... for hyperboloids of one sheet (HYP) - Still confused... Hi, I read a bit about the volume forms, but I still don't quite understand, can you please help? Thanks! http://www.google-melange.com/gci/task/view/google/gci2012/8009213
02:30.03 Notify 03GCI: Glass: Find, reliably reproduce, and report any bug in Archer - Claim Removed The claim on this task has been removed, someone else can claim it now. http://www.google-melange.com/gci/task/view/google/gci2012/8027205
02:46.50 Notify 03GCI: Chris Kloehn: Crash MGED reliably (#3) - Claim Removed The claim on this task has been removed, someone else can claim it now. http://www.google-melange.com/gci/task/view/google/gci2012/7958221
03:01.40 Notify 03GCI: Arjun Govindjee: Implement mutex locking for Windows - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/7999206
03:08.18 Notify 03BRL-CAD:brlcad * 54016 brlcad/trunk/AUTHORS: confirmed after a bit of research that NRTC was indeed the northrOp research and technology center of the northrop corportation, prior to being merged into northrop grumman (1994), not northrup. tracing back through ancient usenet and arpanet postings also confirms that Willson (two ell's) is indeed correct too.
03:09.47 Notify 03GCI: Sean: Implement mutex locking for Windows - Task Assigned This task has been assigned to Arjun Govindjee. You have 48 hours to complete this task, good luck! http://www.google-melange.com/gci/task/view/google/gci2012/7999206
03:12.20 Notify 03BRL-CAD:jordisayol * 54017 brlcad/trunk/sh/make_rpm.sh: Improve rpm install and remove scripts
03:14.35 Notify 03BRL-CAD:jordisayol * 54018 (brlcad/trunk/misc/debian/archer.desktop brlcad/trunk/misc/debian/brlcad-db.desktop and 5 others): simplify Linux "desktop" files
03:17.51 Notify 03BRL-CAD:jordisayol * 54019 (brlcad/trunk/misc/debian/brlcad.postinst brlcad/trunk/misc/debian/brlcad.postrm): Use "mimeapps.list" instead "defaults.list" on Debian install and remove scripts
03:18.56 Notify 03BRL-CAD:jordisayol * 54020 brlcad/trunk/misc/debian/control: Add "xterm" dependency on Debian packages.
03:21.58 brlcad ~seen math
03:22.00 ibot i haven't seen 'math', brlcad
03:22.09 brlcad ~seen maths22
03:22.09 ibot maths22 <~maths22@173-167-152-209-illinois.hfc.comcastbusiness.net> was last seen on IRC in channel #brlcad, 2d 10h 47m 59s ago, saying: 'yes.'.
03:34.31 brlcad bah, he broke the wiki and took off
03:37.38 Notify 03GCI: Sean: Upgrade Mediawiki website - Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once you re-submit your work. http://www.google-melange.com/gci/task/view/google/gci2012/7974236
03:38.33 Notify 03GCI: Sean: Upgrade Mediawiki website - Um. You apparently broke the main wiki. Do you recall what you did? http://www.google-melange.com/gci/task/view/google/gci2012/7974236
03:42.18 *** join/#brlcad nyanfly (472e46d5@gateway/web/freenode/ip.71.46.70.213)
04:26.18 Notify 03GCI: fernozzle: Implement a primitive volume function ... for gridded volumes (VOL) - Claim Removed The claim on this task has been removed, someone else can claim it now. http://www.google-melange.com/gci/task/view/google/gci2012/7998215
04:37.08 Notify 03GCI: Sean: Implement a primitive volume function ... for gridded volumes (VOL) - give up? It sounds like you were close to compiling cleanly. The error daniel posted is because you have to only declare variables at the top of a function. http://www.google-melange.com/gci/task/view/google/gci2012/7998215
04:42.35 Notify 03BRL-CAD Wiki:Sean * 4738 /wiki/Mailing_Lists: Reverted edits by [[Special:Contributions/118.99.66.128|118.99.66.128]] ([[User talk:118.99.66.128|Talk]]); changed back to last version by [[User:Sean|Sean]]
04:43.30 Notify 03BRL-CAD Wiki:Sean * 0 /wiki/Special:Log/block: blocked [[User:118.99.66.128]] with an expiry time of infinite (anonymous users only, account creation disabled): Spamming links to external sites
04:47.45 Notify 03GCI: Sean: Upgrade Mediawiki website - fixed I fixed the problems by restoring from backup. Go ahead and submit the task again as completed. http://www.google-melange.com/gci/task/view/google/gci2012/7974236
05:00.19 Notify 03GCI: Melange: Implement thread creation for Windows - No more Work can be submitted Melange has detected that the deadline has passed and no more work can be submitted. The submitted work should be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/8030203
05:01.34 Notify 03GCI: Melange: Create an artistic screenshot - No more Work can be submitted Melange has detected that the deadline has passed and no more work can be submitted. The submitted work should be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/8025213
05:01.59 Notify 03GCI: Sean: Fix <author> tags in our Docbook documentation - Task Closed Congratulations, this task has been completed successfully. http://www.google-melange.com/gci/task/view/google/gci2012/7964207
05:04.20 Notify 03GCI: Sean: Create an RTWizard screenshot - Task Closed Congratulations, this task has been completed successfully. http://www.google-melange.com/gci/task/view/google/gci2012/8034204
05:06.01 Notify 03GCI: Sean: Create an artistic screenshot - Deadline extended The deadline of the task has been extended with 1 days and 0 hours. http://www.google-melange.com/gci/task/view/google/gci2012/8025213
05:11.07 Notify 03GCI: Sean: Create an artistic screenshot - woah That's rather unexpected. Would you also provide the .g file you used to make the image? Lastly, would you also make the camera nearly fill more of the view? 20-30% bigger should do. Those should be the last two things to close out this task. Thank you for your efforts! http://www.google-melange.com/gci/task/view/google/gci2012/8025213
05:11.22 Notify 03GCI: Sean: Create an artistic screenshot - Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once you re-submit your work. http://www.google-melange.com/gci/task/view/google/gci2012/8025213
05:16.59 Notify 03GCI: Aaron Keesing: Implement a primitive centroid function ... for hyperboloids of one sheet (HYP) - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/8030210
05:22.41 Notify 03GCI: javamonn: Make tables.c not call system("cat ...") - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/7966235
05:28.02 Notify 03GCI: Sean: Create prototype 2D CAD drawing(s) - still not in a usable state So this is still not in a usable state as you don't provide any information on why you chose this particular layout. You also merely copy-pasted information from wikipedia without citing them as a source. That is never acceptable. You're on the right track with the... http://www.google-melange.com/gci/task/view/google/gci2012/7985229
05:28.07 Notify 03GCI: Sean: Create prototype 2D CAD drawing(s) - Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once you re-submit your work. http://www.google-melange.com/gci/task/view/google/gci2012/7985229
05:32.39 Notify 03GCI: Sean: Write a BRL-CAD showcase article - problems not fixed So several of the problems I pointed out are still problems. This including expanding ALL acronyms prior to use, 'maths', no pictures, and more. Please go through the list again more carefully. http://www.google-melange.com/gci/task/view/google/gci2012/8022213
05:32.49 Notify 03GCI: Sean: Write a BRL-CAD showcase article - Deadline extended The deadline of the task has been extended with 2 days and 0 hours. http://www.google-melange.com/gci/task/view/google/gci2012/8022213
05:32.50 Notify 03GCI: Sean: Write a BRL-CAD showcase article - Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once you re-submit your work. http://www.google-melange.com/gci/task/view/google/gci2012/8022213
05:34.19 Notify 03GCI: Sean: Add missing documentation (for any ONE command) - Deadline extended The deadline of the task has been extended with 2 days and 0 hours. http://www.google-melange.com/gci/task/view/google/gci2012/7972228
05:34.24 Notify 03GCI: Sean: Add missing documentation (for any ONE command) - Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once you re-submit your work. http://www.google-melange.com/gci/task/view/google/gci2012/7972228
05:39.57 Notify 03GCI: Sean: Add missing documentation (for any ONE command) - not template So you said you "rewrote into template", but not according to what i'm seeing. Your file is not valid XML. You also didn't modify the build system files (CMakeLists.txt and Makefile.am). The template I was referring to is... http://www.google-melange.com/gci/task/view/google/gci2012/7972228
05:49.19 Notify 03GCI: Sean: Implement thread creation for Windows - now that's... Now that's looking like a proper patch! I haven't tested whether it actually compiles, but the patch applied cleanly. There were STILL three problems with the patch including an outright syntax error, so it certainly doesn't compile in its latest final form. Other problems... http://www.google-melange.com/gci/task/view/google/gci2012/8030203
05:49.20 Notify 03GCI: Sean: Implement thread creation for Windows - Task Closed Congratulations, this task has been completed successfully. http://www.google-melange.com/gci/task/view/google/gci2012/8030203
05:51.41 Notify 03BRL-CAD:brlcad * 54021 (brlcad/trunk/AUTHORS brlcad/trunk/src/libbu/parallel.c): accept gci task http://www.google-melange.com/gci/task/view/google/gci2012/8030203 from Adri?\195?\161n Arroyo Calle that reportedly (untested) implements for creating threads on windows. this is the first of two critical pieces that get us closer to SMP on windows.
06:00.28 Notify 03GCI: Sean: Make tables.c not call system("cat ...") - few problems I noticed a few problems that need to be fixed with the patch: don't remove the blank line after the common.h include using double-quotes (eg, #include "header") is bad-form for system headers should be bio.h instead of stdio.h and come after all of the sytems headers the... http://www.google-melange.com/gci/task/view/google/gci2012/7966235
06:00.38 Notify 03GCI: Sean: Make tables.c not call system("cat ...") - Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once you re-submit your work. http://www.google-melange.com/gci/task/view/google/gci2012/7966235
06:11.58 brlcad woot, all tasks processed that were waiting
06:12.56 Notify 03GCI: Sean: Implement a primitive centroid function ... for hyperboloids of one sheet (HYP) - not right So a few problems. First and foremost, it looks like the centroid is wrong. It's not just the Vi point as that's on the base. Next, the indentation is wrong in the hyp.c file. See our HACKING file or other source files for details and... http://www.google-melange.com/gci/task/view/google/gci2012/8030210
06:12.57 Notify 03GCI: Sean: Implement a primitive centroid function ... for hyperboloids of one sheet (HYP) - Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once you... http://www.google-melange.com/gci/task/view/google/gci2012/8030210
06:14.01 Notify 03GCI: Andrei Tudorica: Create prototype 2D CAD drawing(s) - I am sorry I am sorry if I annoyed you or something, I will avoid this kind of tasks from now on, but I can't give up on this one. :D I changed the text so I wouldn't be the same with the one on wikipedia. http://www.google-melange.com/gci/task/view/google/gci2012/7985229
06:26.06 Notify 03GCI: Andrei Tudorica: Create prototype 2D CAD drawing(s) - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/7985229
06:54.29 Notify 03GCI: Andrei Tudorica: Create prototype 2D CAD drawing(s) - ... I am not usualy that stupid...:D http://www.google-melange.com/gci/task/view/google/gci2012/7985229
07:35.47 Notify 03GCI: Melange: Compile BRL-CAD using GCC 4.8 - Initial Deadline passed Melange has detected that the initial deadline has passed and it has set the task status to ActionNeeded. The student has 24 hours to submit the work before the task is reopened and sent back to the pool for other students to claim. http://www.google-melange.com/gci/task/view/google/gci2012/7982223
07:41.21 *** join/#brlcad d_rossberg (~rossberg@BZ.BZFLAG.BZ)
09:13.34 Notify 03GCI: Ashish: Categorize all of BRL-CAD's commands into a spreadsheet - Extension Can i Please can i get an extension i am doing my work but the school work is getting more specially before the holidays I am doing all the work but there are lots of commands. Can i get a days extension ?? http://www.google-melange.com/gci/task/view/google/gci2012/7970237
09:15.49 Notify 03GCI: Daniel Rossberg: Categorize all of BRL-CAD's commands into a spreadsheet - Deadline extended The deadline of the task has been extended with 2 days and 0 hours. http://www.google-melange.com/gci/task/view/google/gci2012/7970237
09:18.06 Notify 03GCI: Ashish: Categorize all of BRL-CAD's commands into a spreadsheet - Thanks Well that was fast :) http://www.google-melange.com/gci/task/view/google/gci2012/7970237
09:24.08 *** join/#brlcad Al_Da_Best (~Al_Da_Bes@cpc2-shep12-2-0-cust21.8-3.cable.virginmedia.com)
09:43.28 *** join/#brlcad agkphysics (~agkphysic@118-92-82-28.dsl.dyn.ihug.co.nz)
10:17.40 *** join/#brlcad archivist (~archivist@host81-149-189-98.in-addr.btopenworld.com)
10:37.14 Notify 03GCI: Aaron Keesing: Implement a primitive centroid function ... for hyperboloids of one sheet (HYP) - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/8030210
10:45.32 Notify 03GCI: Aaron Keesing: Implement a primitive centroid function ... for hyperboloids of one sheet (HYP) - Centroid Function I only uploaded the patch file this time, so hyp.c and table.c are still my original ones. I think I have also fixed the indentation problem; I was using tabs instead of spaces. Looking at the code already in hyp.c I... http://www.google-melange.com/gci/task/view/google/gci2012/8030210
10:47.06 *** part/#brlcad agkphysics (~agkphysic@118-92-82-28.dsl.dyn.ihug.co.nz)
11:25.43 *** join/#brlcad Skriptkid (~Skriptkid@117.202.56.12)
11:26.34 Skriptkid brlcad: Did that work?
11:29.12 Skriptkid brlcad: Need it done ASAP. I have just 2 hours.
11:39.41 Skriptkid I need a certain program installed on the brlcad server. Can anybody do that?(Since brlcad is away.)
11:41.54 Notify 03GCI: Daniel Rossberg: Implement a primitive centroid function ... for hyperboloids of one sheet (HYP) - hyp.c breaks the build [ 27%] Building C object src/librt/CMakeFiles/librt.dir/primitives/hyp/hyp.co /home/rossberg/Devel/brlcad/src/librt/primitives/hyp/hyp.c: In function 'rt_hyp_centroid': ... http://www.google-melange.com/gci/task/view/google/gci2012/8030210
11:42.04 Notify 03GCI: Daniel Rossberg: Implement a primitive centroid function ... for hyperboloids of one sheet (HYP) - Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once... http://www.google-melange.com/gci/task/view/google/gci2012/8030210
11:42.44 Notify 03GCI: Daniel Rossberg: Set up BuildBot continuous integration for BRL-CAD - Deadline extended The deadline of the task has been extended with 2 days and 0 hours. http://www.google-melange.com/gci/task/view/google/gci2012/8006217
11:43.17 Skriptkid thanks, d_rossberg
11:44.39 d_rossberg but i can't help with the brlcad server :(
11:45.06 Skriptkid oh :( okay
11:48.35 *** join/#brlcad Silvrous (4f706699@gateway/web/freenode/ip.79.112.102.153)
11:54.58 Silvrous Could I get an extension on my current task ( http://www.google-melange.com/gci/task/view/google/gci2012/7982218 ) ? I was occupied the last couple of days and couldn't properly get to it.
12:08.44 *** join/#brlcad caen23_ (~caen23@92.81.202.220)
12:19.34 *** join/#brlcad Skriptkid (~Skriptkid@117.202.56.12)
12:31.24 *** join/#brlcad xavortm (xavortm@93.155.146.15)
12:34.49 Notify 03GCI: Daniel Rossberg: Add a primitive surface area function ... for right hyperbolic cylinders (RHC) - Deadline extended The deadline of the task has been extended with 2 days and 0 hours. http://www.google-melange.com/gci/task/view/google/gci2012/7982218
12:35.17 Silvrous d_rossberg: Thank you.
12:56.24 *** join/#brlcad Skriptkid (~Skriptkid@117.202.56.12)
12:57.07 Notify 03BRL-CAD Wiki:Jacksixb * 4739 /wiki/User:Jacksixb/Independent_Study_2012-13_Log:
12:58.53 *** join/#brlcad titi_ (4f640cda@gateway/web/freenode/ip.79.100.12.218)
12:59.23 titi_ I want someone to help me http://www.google-melange.com/gci/task/view/google/gci2012/8003218
13:09.14 *** join/#brlcad Skriptkid (~Skriptkid@117.202.56.12)
13:14.51 Notify 03GCI: John: Write a BRL-CAD showcase article - Everything on the list is completed Sean, I've now fulfilled all tasks on the list. The images are on the URL. Also, I can't find the meaning of BREP. http://www.google-melange.com/gci/task/view/google/gci2012/8022213
13:17.31 *** join/#brlcad titi_ (4f640cda@gateway/web/freenode/ip.79.100.12.218)
13:17.33 Notify 03BRL-CAD Wiki:62.28.72.245 * 4740 /wiki/Community_Publication_Portal: /* GSoC: Jianbang Wu */
13:18.38 Notify 03GCI: John: Write a BRL-CAD showcase article - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/8022213
13:19.54 titi_ Can someone help me with this http://www.google-melange.com/gci/task/view/google/gci2012/8003218
13:28.41 Notify 03GCI: Jacob B: Upgrade Mediawiki website - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/7974236
13:29.26 Notify 03GCI: Jacob B: Upgrade Mediawiki website - Broken wiki I'm not sure what I did. I was careful to only read from the main server, but I must have pressed the wrong button/command. http://www.google-melange.com/gci/task/view/google/gci2012/7974236
13:30.26 Notify 03GCI: javamonn: Make tables.c not call system("cat ...") - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/7966235
13:39.04 Notify 03GCI: Ambar Pal: Compile BRL-CAD using GCC 4.8 - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/7982223
13:41.04 Notify 03GCI: Melange: Find and fix at least 10 spelling mistakes in at least 10 different files - Task Reopened Melange has detected that the final deadline has passed and it has reopened the task. http://www.google-melange.com/gci/task/view/google/gci2012/7959223
13:46.15 xavortm I just uploaded my work in http://www.google-melange.com/gci/task/view/google/gci2012/7960223 Added: CAD interface + selecting options before project
13:47.28 xavortm And, can some one tell me what Daniel Rossberg wanted to say with "It contains two screenshots (from an Apple computer?)" That i copied? What i did is my design. Nothing is copied (i was using reference to know how cad soft looks ofc), i did the designs in photoshop and saved as jpg files.
13:51.43 *** join/#brlcad Skriptkid (~Skriptkid@117.202.56.12)
13:57.14 Notify 03GCI: Melange: Make tables.c not call system("cat ...") - No more Work can be submitted Melange has detected that the deadline has passed and no more work can be submitted. The submitted work should be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/7966235
13:59.56 brlcad titi_: what help do you need?
14:00.53 titi_ I want login credentials
14:01.21 brlcad ah, very good
14:04.29 xavortm brlcad, if you have the time, can you guve me some feedback for the designs? ^^
14:07.05 titi_ brlcad, ?
14:18.15 d_rossberg xavortm: i don't believe you that you have designed the Google homepage on your "Browse the web" image
14:25.16 xavortm haha well, the google home page is not my design, i could put some mine, but as i saw in the preview folder there was also google page
14:28.29 d_rossberg brlcad said that this image was not meant as an result but as an example for a GUI layout you like, is this right?
14:35.35 brlcad titi_: give me a few minutes .. have to find the credentials
14:35.57 titi_ okay, thanks :)
14:41.02 xavortm yes, this is how i emagine it sould look like :)
14:46.13 d_rossberg this was a little bit confusing for me: i expected a CAD and got a browser ;)
14:47.01 xavortm haha well, i uploaded cad omterface (i make the browser before i fully understand what i have to do)
14:57.23 *** join/#brlcad Skriptkid (~Skriptkid@117.202.56.12)
15:00.33 brlcad titi: don't be shy to ask questions in the channel or share progress
15:00.38 brlcad i'm really curious to see how things go
15:02.02 brlcad titi_: do you know how to enable optimization?
15:03.44 brlcad d_rossberg: I figured that patch needed more work (the windows threading), but was going to let a follow-up task demonstrate that it works
15:04.06 brlcad I think they'd put more than 2+ hours in already
15:04.28 *** join/#brlcad Skriptkid (~Skriptkid@117.202.56.12)
15:04.32 brlcad so once it was clean, i thought it was okay to "move on" and get someone to try
15:05.13 brlcad someone took on the semaphore task, so maybe they'll do a better job and they can fix it
15:07.03 Skriptkid brlcad: Installed?
15:11.04 brlcad Skriptkid: so there's a queue of every comment and action that gets taken
15:11.16 brlcad i've not gotten to whatever it is your referring to so you'll need to say it here...
15:11.22 brlcad titi_: you away?
15:11.51 titi_ no
15:12.03 brlcad excellent
15:12.05 Skriptkid brlcad: http://www.google-melange.com/gci/work/download/google/gci2012/8006217?id=6001
15:12.13 brlcad titi_: do you know how to enable opt?
15:12.22 brlcad or how to find out
15:12.37 brlcad ``Erik: uh oh
15:12.46 titi_ no can you help me
15:12.55 Skriptkid brlcad: accept the file if the link doesnt open up
15:14.02 Skriptkid brlcda: got it?
15:14.19 brlcad titi_: so start with the INSTALL file, that has the general instructions including how to turn on optimization
15:14.27 brlcad Skriptkid: I have something...
15:14.50 brlcad titi_: i forget the exact name, but you're going to first just compile normally
15:14.53 brlcad and run the benchmark
15:15.02 brlcad see if that works, and hopefully it all does without issue
15:15.17 Skriptkid its just a plain txt file
15:15.19 brlcad regardless of whether it does or doesn't, keep you logs
15:15.32 brlcad titi_: keep the cmake output in particular
15:15.40 brlcad and the 'make' output
15:15.58 titi_ okay
15:16.08 *** join/#brlcad Notify (~notify@66-118-151-70.static.sagonet.net)
15:16.09 brlcad titi_: try that first and we'll see how it goes before worrying about optimization
15:16.14 brlcad hugs Notify
15:17.04 brlcad Skriptkid: so I'm looking at a lot of steps and many of them don't require superuser
15:17.31 Skriptkid the installation parts do. I get a 'permission denied'
15:17.53 brlcad i'm sure they do
15:17.58 brlcad so I can run those for you
15:18.19 brlcad i'm not going to download ez_setup and create directories, though -- that's all stuff that you're supposed to do
15:18.40 brlcad just tell me what command needs to be run as sudo, from which directory, and what exactly that command does
15:18.48 brlcad why it needs sudo
15:18.53 Skriptkid I've downloaded it. It's on my home directory(~gciskriptkid)
15:18.57 Skriptkid ok
15:19.00 Skriptkid hang on
15:19.14 Skriptkid in section (a) Master:
15:19.17 Skriptkid sorry
15:19.19 brlcad if it gave you permission denied, what was that on?
15:19.21 Skriptkid that emoticon wasnt meant
15:19.23 Skriptkid anyway
15:19.26 Skriptkid in section a
15:19.26 brlcad permission denied doing what?
15:19.31 Skriptkid installing
15:19.47 Skriptkid it adds certain files to /usr/local/bin, I think
15:19.57 Skriptkid step 2 needs sudo
15:19.59 brlcad what files?
15:20.24 Skriptkid buildbot executable
15:20.34 brlcad these are all things we need to know, not just blindly following some install instructions someone posted to a website.. ;)
15:20.43 brlcad it's probably a script, no?
15:20.48 Skriptkid thats fine
15:20.50 Skriptkid yep
15:20.59 Skriptkid and adds it to path
15:21.11 ``Erik is this the same buildbot that's in ports?
15:21.14 Skriptkid so theres no need to change path to where buildbot is everytime it has to be run
15:21.24 brlcad ``Erik: probably
15:21.29 ``Erik /usr/ports/devel/buildbot
15:21.43 ``Erik http://buildbot.net/ ?
15:21.44 brlcad now that I'm willing to run ;)
15:21.47 brlcad yep
15:21.59 ``Erik installing not
15:22.00 ``Erik now
15:22.32 ``Erik py-twisted* heh
15:22.44 brlcad yay, another twisted...
15:23.38 ``Erik quite a few deps, it'll take a few minutes
15:23.43 Skriptkid brlcad: Simply put : i) ez_setup.py installs 'easy_install' and ii) easy_install installs buildbot. And these installations need permissions because they add executables to bin
15:24.02 Skriptkid ez_setup.py is on my home folder
15:24.20 Skriptkid thats the only file you'll really need downloaded(whcih is done)
15:25.24 Skriptkid brlcad: Any more explanation needed?
15:26.18 ``Erik Skriptkid: we're going to do something different, buildbot is available in the "ports" package management system, so we're installing from there, instead...
15:26.36 Skriptkid ok
15:26.40 Skriptkid I just need it installed
15:27.43 brlcad Skriptkid: the point would have been to not install them into a system bin folder (because they're not managed)
15:28.02 brlcad you could have installed them into your home directory, for example
15:28.11 brlcad but since they're in ports, that makes a managed install easy
15:28.23 brlcad always a good idea to see if there's a managed install...
15:28.31 Skriptkid ko
15:28.33 Skriptkid *ok
15:28.45 brlcad and you don't "just need it installed"
15:28.54 brlcad that's playing a blind eye to the entire problem
15:29.07 Notify 03GCI: Cristian: Find and fix at least 20 spelling mistakes in at least 5 different files - Claim Removed The claim on this task has been removed, someone else can claim it now. http://www.google-melange.com/gci/task/view/google/gci2012/8033204
15:29.13 ``Erik done
15:29.20 brlcad it needs to be installed properly or we have a maintenance burden far greater than you setting up buildbot
15:29.48 Skriptkid Sorry, hadn't seen that far :)
15:29.56 ``Erik manifest is in /var/db/pkg/buildbot-0.8.6p1/+CONTENTS
15:29.57 Notify 03GCI: Cristian: Find and fix at least 20 spelling mistakes in at least 5 different files - Sorry I remove the claim on the task due to personal problems, sorry. http://www.google-melange.com/gci/task/view/google/gci2012/8033204
15:30.54 Skriptkid Woohoo! It's installed and running fine. thanks, brlcad and ``Erik :D
15:31.27 Skriptkid Could you please install buildbot-slave also? It was right below buildbot, I think, in ports
15:32.16 brlcad for anyone that hasn't seen it yet: http://www.army.mil/article/92288/BRL_CAD__the_world_s_oldest_open_source_software_system/
15:33.13 ``Erik done
15:34.40 ``Erik heh, so that thing finally went out :) cool
15:37.34 *** join/#brlcad Skriptkid (~Skriptkid@117.202.56.12)
15:37.39 brlcad finally? public affairs picke up on it just a few weeks ago
15:37.48 brlcad we interviewed and iterated a couple times, then it posted
15:38.07 brlcad pjt had to inject some words at the last minute, of course ;)
15:38.18 ``Erik ah, I probably just noticed the first bit of it
15:39.07 brlcad this is what prompted it: http://opensourcedelivers.com/2012/10/02/oldies-but-goodies-seven-projects-still-rocking-open-source/
15:41.03 Skriptkid brlcad: where should the buildbot page be visible?(for now) ~gciskriptkid/public_html?
15:47.40 brlcad Skriptkid: you have to look at the manifest that erik pasted and see where you pick up from there in their setup instructions
15:47.52 brlcad they may have a page specifically on setting up on freebsd ports
15:47.56 brlcad you'll hae to look for it
15:48.02 brlcad s/hae/have/
15:48.21 Skriptkid ok
15:49.37 titi_ brlcad: when I try to build it I get: CMake Error: The following variables are used in this project, but they are set to NOTFOUND. If i want to fix this I must run this commands: aptitude install sed byacc flex xsltproc aptitude install libncursesw5-dev libfontconfig-dev aptitude install xserver-xorg-dev aptitude install libx11-dev libxi-dev libxt-dev libxau-dev libxext-dev libxmu-dev libxmu-headers but for this i must be root
15:58.40 xavortm Question: should i mark my task as compleeted to make some one view what i did? :)
15:59.07 xavortm ( i am not shure how the system works, that why i ask )
15:59.11 Notify 03BRL-CAD:starseeker * 54022 (brlcad/trunk/CMakeLists.txt brlcad/trunk/misc/CMake/DocBook.cmake and 3 others): Try a non-build-target based approach to the XML validation.
16:04.00 *** join/#brlcad maths22 (~maths22@173-167-152-209-illinois.hfc.comcastbusiness.net)
16:04.52 Skriptkid xavortm: Yes
16:04.58 maths22 brlcad: Are there goint to be any more web tasks?
16:05.18 xavortm And there are no problems if i mark my task as complited for secound time (i hope not more)
16:06.22 Notify 03GCI: Alexander Dimitrov: Create prototype CAD GUI layout diagram - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/7960223
16:08.41 Skriptkid xavortm: Every time you upload a new file for review, that button will appear. If you want someone to see it, Mark it as complete. No. of times doesnt matter
16:09.29 xavortm Hmm ... thanks for telling me. Now i wont rage if no one is looking what i do :D
16:10.09 Skriptkid No probs. Just wait until someone reviews it or else ask here if someone's free and can do it
16:10.44 xavortm Ok, i will wait, thanks for the help
16:11.22 Skriptkid Sure :)
16:12.01 brlcad maths22: yes there are
16:12.44 brlcad I have a sheet of paper with about 100 more tasks identified
16:12.56 brlcad i'm hoping to add many of them throughout today
16:13.04 brlcad several of them are web tasks
16:13.36 brlcad titi_: what was not found?
16:14.09 brlcad titi_: you shouldn't need to install anything, see whether you can actually just get a completed build
16:14.42 brlcad xavortm: you should ask a question or mark it as completed, otherwise we don't know it's there
16:14.44 *** join/#brlcad harmanpreet (~chatzilla@124.253.23.145)
16:15.24 titi_ brlcad: FONTCONFIG_LIBRARIES (ADVANCED) X11_X11_LIB (ADVANCED) X11_Xext_LIB (ADVANCED) X11_Xi_LIB (ADVANCED)
16:15.46 brlcad titi_: considering you're working over a remote ssh connection, I think compiling without X is just fine :)
16:15.56 brlcad in fact, you may need to explicitly disable it
16:18.16 maths22 brlcad: thanks
16:18.58 brlcad hi harmanpreet
16:19.02 brlcad maths22: yw
16:19.47 titi_ brlcad: how to disable it?
16:19.55 maths22 brlcad: I do not have acess to a server I can run a persistant IRC client on
16:21.42 *** join/#brlcad Ashish101 (75c223fd@gateway/web/freenode/ip.117.194.35.253)
16:22.02 Notify 03GCI: HS Rai: Write a BRL-CAD showcase article - Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once you re-submit your work. http://www.google-melange.com/gci/task/view/google/gci2012/8022213
16:22.31 Ashish101 I am supposed to make a spread sheet -- what format is good for submission ??
16:23.53 starseeker titi_: -DBRLCAD_ENABLE_X11=OFF
16:24.05 titi_ thanks :)
16:25.13 starseeker supposes he should disable X11 by default if those aren't found...
16:27.23 Notify 03GCI: HS Rai: Write a BRL-CAD showcase article - Pictures You have not attended to Sr. NO 2 of Sean's comment dated December 6 2012 at 06:42 UTC: There are no pictures... there should be pictures, especially for Wu's work. Ideally something not already on his project page, but something exemplary from Wu. http://www.google-melange.com/gci/task/view/google/gci2012/8022213
16:28.29 *** join/#brlcad maths222 (~maths22@173-167-152-209-illinois.hfc.comcastbusiness.net)
16:33.27 Notify 03BRL-CAD:starseeker * 54023 brlcad/trunk/CMakeLists.txt: Move FindX11 up in the logic, don't enable by default if it isn't found.
16:35.55 *** join/#brlcad Skriptkid (~Skriptkid@117.202.56.12)
16:36.02 Skriptkid brlcad: Need some help from here
16:37.47 starseeker titi_: if you update to 54023 and try a clean cmake (without the disabling X11 option) does it work?
16:38.20 starseeker it's relatively rare someone tries to build on a machine without X11, so it's a good chance to shake out any issues
16:51.41 Notify 03GCI: Sean: Create prototype 2D CAD drawing(s) - it's a lesson to learn from Andrei, we're not annoyed nor do I think you're stupid. You may be unfamiliar with the seriousness of plagarism or simply not prepared for what this tasks requires. It is a bit of an advanced concept to follow a standard and come up with a template. You'd probably... http://www.google-melange.com/gci/task/view/google/gci2012/7985229
16:52.16 Notify 03GCI: Sean: Create prototype 2D CAD drawing(s) - Task Closed Congratulations, this task has been completed successfully. http://www.google-melange.com/gci/task/view/google/gci2012/7985229
16:52.19 brlcad maths22: yes you do
16:52.23 brlcad you've been working on one
16:53.16 brlcad titi_: yeah, see if it works by default before adding that option ... it should
16:53.48 brlcad you should start fresh if you already ran cmake, delete and start over
16:54.35 titi_ brlcad: I tryed and don't work
16:55.27 brlcad xavortm: now that's more like it!
16:55.28 titi_ brlcad: i am done with compilation and benchmark run without optimization
16:55.37 brlcad titi_: can you post those logs?
16:55.57 brlcad first the unoptimized benchmark log
16:56.06 titi_ how to get it from the server
16:56.20 titi_ i tryed with scp but permission denied
16:56.21 Skriptkid brlcad: If I start the buildmaster, It needs a URL which will point to it's internal server. Default is "http://localhost:8010/" Do I change that? If so to which port?
16:56.22 brlcad scp the file from your machine
16:56.33 brlcad xavortm: yours is the layout, right?
16:57.07 brlcad Skriptkid: good questions, I have no idea
16:57.12 brlcad it's what ever you set up
16:57.23 brlcad changing from the default would be good
16:57.45 brlcad perhaps port 8001
16:57.59 Skriptkid crit.brlcad.org:8001
16:58.03 Skriptkid Yes?
16:58.24 Notify 03GCI: Sean: Create prototype CAD GUI layout diagram - Task Closed Congratulations, this task has been completed successfully. http://www.google-melange.com/gci/task/view/google/gci2012/7960223
16:59.43 brlcad it should be localhost
16:59.49 Notify 03GCI: Sean: Create prototype CAD GUI layout diagram - hat's more like it So that's more like it and it's a decent evolution from the task manager. There are lots of particulars to sort out, but this should help spark some ideas. You are clearly skilled at design, so perhaps you'll take on some of our other design tasks. I'm adding one... http://www.google-melange.com/gci/task/view/google/gci2012/7960223
16:59.50 Skriptkid ok
17:01.11 Skriptkid brlcad: Check this Out http://crit.brlcad.org:8001/. Obviously not for brlcad, just the default test run
17:01.24 Notify 03GCI: Sean: Compile BRL-CAD using GCC 4.8 - Deadline extended The deadline of the task has been extended with 1 days and 0 hours. http://www.google-melange.com/gci/task/view/google/gci2012/7982223
17:01.29 Notify 03GCI: Sean: Compile BRL-CAD using GCC 4.8 - Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once you re-submit your work. http://www.google-melange.com/gci/task/view/google/gci2012/7982223
17:09.32 Notify 03GCI: Sean: Compile BRL-CAD using GCC 4.8 - make with continuation That looks good, but run "make -k VERBOSE=1" so that we can get all of the errors at once and with a lot more detail. http://www.google-melange.com/gci/task/view/google/gci2012/7982223
17:09.58 maths22 brlcad: can I run it on crit or bzflag?
17:10.02 brlcad Skriptkid: nice progress
17:10.06 brlcad maths22: yep
17:10.11 brlcad crit will work just fine
17:10.27 brlcad your account on bz is disabled at the moment after you broke the wiki and went running off :)
17:10.38 xavortm Thanks for accepting my task !!! I saw you are going to add some new design tasks. Please, write when you do it so i can claim them :)
17:11.32 brlcad keep an eye out for them
17:11.46 brlcad there's a lot of activity, but I try to announce them in here
17:11.48 maths22 Ok
17:13.35 Skriptkid thank you, brlcad
17:20.17 xavortm hey, brlcad, About the design of the site. I am working now on commersial project for themeforest (to sell there). Since i am the author i can use it for what ever i want. Can i send you example of the design (content has nothing common with brlcad yet, but i can change colors and images, elements and so to make it match the branging) and give me some feedback if this is what you are lookinf
17:20.17 xavortm for.
17:22.22 brlcad xavortm: sure
17:23.37 xavortm http://goo.gl/eZT0P = INDEX ; http://goo.gl/f4va3 = BLOG ; http://goo.gl/ndkSL = PORTFOLIO
17:23.42 brlcad xavortm: have you worked on any drupal or mediawiki themes?
17:23.58 xavortm No, i have experience only with wordpress ;(
17:24.13 brlcad error, 403 -- don't have access
17:24.26 xavortm Hmm, ok i will try something else (1 min)
17:25.11 brlcad so maybe an educational task -- create a theme demo, then another task to convert it to drupal and other to mediawiki ;)
17:25.21 xavortm http://store.picbg.net/pubpic/9E/A9/7c9b64869d0c9ea9.jpg = blog (single page) ; http://store.picbg.net/pubpic/AD/09/6ebb953197fbad09.jpg = blog page
17:25.31 xavortm http://store.picbg.net/pubpic/11/10/9e1dd9beaa031110.jpg = index page (there are 2 more designs)
17:26.11 Notify 03GCI: Sean: Make tables.c not call system("cat ...") - Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once you re-submit your work. http://www.google-melange.com/gci/task/view/google/gci2012/7966235
17:28.18 Notify 03GCI: Sean: Make tables.c not call system("cat ...") - I'm guessing I'm guessing that you haven't actually tried to compile your patch. Please re-review and test whether this actually works. Upon further inspection, I don't think your code is equivalent to what the system() call was doing. You're appending the name of the file, which the... http://www.google-melange.com/gci/task/view/google/gci2012/7966235
17:28.28 Notify 03GCI: Sean: Make tables.c not call system("cat ...") - Deadline extended The deadline of the task has been extended with 2 days and 0 hours. http://www.google-melange.com/gci/task/view/google/gci2012/7966235
17:31.44 Notify 03GCI: Sean: Write a BRL-CAD showcase article - Ah I see John, I see why it was confusing. You have text here and on the CPP. You should keep them in sync or provide the cpp url as the next upload so we know where to look for the latest. Your article needs to stand-alone, so pointing them to a URL saying there are some images there doesn't... http://www.google-melange.com/gci/task/view/google/gci2012/8022213
17:31.46 brlcad yay, no more needing review
17:32.41 brlcad xavortm: hm, that site isn't responding
17:33.01 brlcad oh it is, just REALLY slowly
17:33.18 xavortm well bulgarian server :( i am failing twice in a row (will work on that noe!) :)
17:34.07 xavortm Ok, please tell me you can open this link: https://www.dropbox.com/s/m7nv60h93ge8i7i/Blog%20-%20Single.jpg (the single blog page layoult)
17:48.24 Notify 03GCI: Shayantan: Layout "MGED Interface" Reference Document - Extension Please Give Me An Extension . http://www.google-melange.com/gci/task/view/google/gci2012/7953233
17:52.50 Notify 03GCI: Harmanpreet Singh: Layout "MGED Interface" Reference Document - Deadline extended The deadline of the task has been extended with 1 days and 0 hours. http://www.google-melange.com/gci/task/view/google/gci2012/7953233
17:53.51 Notify 03BRL-CAD Wiki:62.28.72.245 * 4741 /wiki/Community_Publication_Portal: /* Google Summer of Code: Jianbang Wu */
17:54.51 Notify 03GCI: John: Write a BRL-CAD showcase article - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/8022213
18:07.55 Notify 03GCI: Mrowqa: Doxygen cleanup ... for LIBBN - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/8031203
18:21.24 *** join/#brlcad maths22 (~gcimaths@66-118-151-70.static.sagonet.net)
18:30.54 Notify 03BRL-CAD:carlmoore * 54024 (brlcad/trunk/doc/docbook/lessons/es/mged09_esfera_en_caja_exhibidora.xml brlcad/trunk/include/raytrace.h and 3 others): fix spellings, including one in Spanish
18:36.03 *** join/#brlcad maths22 (~gcimaths@66-118-151-70.static.sagonet.net)
18:43.54 *** join/#brlcad gcimaths (~gcimaths@66-118-151-70.static.sagonet.net)
18:57.45 xavortm brlcad? Did yo check what i send as link? Or does any of the pictures load allready? Please tell me if this is something like the design you need. (else i will work on other :))
19:00.00 *** join/#brlcad merzo (~merzo@230-63-133-95.pool.ukrtel.net)
19:01.52 Notify 03GCI: Shayantan: Layout "MGED Interface" Reference Document - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/7953233
19:02.42 Notify 03GCI: Andrei Tudorica: Create prototype 2D CAD drawing(s) - . Thank you:) And yes, I'll try something closer to my knowledge http://www.google-melange.com/gci/task/view/google/gci2012/7985229
19:05.39 Notify 03GCI: Andrei Tudorica: Compile BRL-CAD using Dev-C++ - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/7945220
19:10.56 Notify 03GCI: Sean: Doxygen cleanup ... for LIBBN - Task Assigned This task has been assigned to Mrowqa. You have 48 hours to complete this task, good luck! http://www.google-melange.com/gci/task/view/google/gci2012/8031203
19:11.06 Notify 03GCI: Sean: Compile BRL-CAD using Dev-C++ - Task Assigned This task has been assigned to Andrei Tudorica. You have 48 hours to complete this task, good luck! http://www.google-melange.com/gci/task/view/google/gci2012/7945220
19:31.27 Notify 03GCI: Sean: Implement a primitive centroid function ... for hyperboloids of one sheet (HYP) - look again Aaron, I suggest looking that function over again and noting the object types. I may be mistaken as I only did a quick check, but I think you're confusing the V field on one struct with the Vi field on a different struct. Make a hyp... http://www.google-melange.com/gci/task/view/google/gci2012/8030210
19:31.43 Notify 03GCI: Sean: Implement a primitive centroid function ... for hyperboloids of one sheet (HYP) - Deadline extended The deadline of the task has been extended with 1 days and 0 hours. http://www.google-melange.com/gci/task/view/google/gci2012/8030210
19:33.44 Notify 03GCI: Sean: Add missing documentation (for any ONE command) - if you have any questions... If you have questions or need some assistance, we're here to help you. We won't do the work for you, but we'll gladly help you understand things. http://www.google-melange.com/gci/task/view/google/gci2012/7972228
19:34.04 Notify 03GCI: Melange: Compile BRL-CAD on Windows using Cygwin - Task Reopened Melange has detected that the final deadline has passed and it has reopened the task. http://www.google-melange.com/gci/task/view/google/gci2012/7972239
19:34.20 Notify 03BRL-CAD:carlmoore * 54025 brlcad/trunk/misc/CMake/DocBook.cmake: remove trailing blank/tab, and fix spelling
19:38.10 Notify 03GCI: Sean: Compile BRL-CAD on Windows using Cygwin - Reclaim Brenden, you're welcome to reclaim this task and since you've obviously put some work into it, I encourage you to do so. We don't want your efforts to be a waste. As for that error, there are way too many variables to diagnose from that little snippet of an error by itself.... http://www.google-melange.com/gci/task/view/google/gci2012/7972239
19:45.28 Notify 03BRL-CAD:carlmoore * 54026 brlcad/trunk/doc/html/manuals/cadwidgets/Command.html: fix spelling
19:49.54 Notify 03GCI: Sean: Find and fix at least 20 spelling mistakes in at least 5 different files - did you find any Cristian, did you find any spelling mistakes? If so, perhaps you can share them publicly here to help the next person. You're also welcome to reclaim the task if it's still available at your discretion. http://www.google-melange.com/gci/task/view/google/gci2012/8033204
19:51.39 Notify 03GCI: Sean: Layout "MGED Interface" Reference Document - Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once you re-submit your work. http://www.google-melange.com/gci/task/view/google/gci2012/7953233
19:53.56 Notify 03GCI: Sean: Layout "MGED Interface" Reference Document - what? Shayantan, Did you look at the provided references? I think you may be completely miunderstanding this task. The task is not to make a screenshot -- even if it were, this would be a terrible screenshot. :) The task is to document the interface like in the various examples. If... http://www.google-melange.com/gci/task/view/google/gci2012/7953233
19:55.06 Notify 03GCI: Sean: Find, reliably reproduce, and report any bug in Archer - of course Did you investigate whether we have an IRC channel for BRL-CAD? http://www.google-melange.com/gci/task/view/google/gci2012/8027205
19:55.07 Notify 03GCI: Melange: Implement a primitive volume function ... for hyperboloids of one sheet (HYP) - Task Reopened Melange has detected that the final deadline has passed and it has reopened the task. http://www.google-melange.com/gci/task/view/google/gci2012/8009213
19:57.36 Notify 03GCI: Sean: Implement a primitive volume function ... for hyperboloids of one sheet (HYP) - we're here to help Willie, of course we can help, but you need to ask a specific question. We'll help you understand, but you have to do the work. We're can't tell people what to do each step along the way or it'd be faster if we just did it... http://www.google-melange.com/gci/task/view/google/gci2012/8009213
19:58.17 Notify 03GCI: An Ha: Find and fix at least 10 spelling mistakes in at least 10 different files - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/7959223
20:03.10 Notify 03BRL-CAD:carlmoore * 54027 brlcad/trunk/src/libpc/Makefile.am: fix spelling (that is LTLIBRARIES, right?)
20:03.13 *** join/#brlcad brlcad (~sean@BZ.BZFLAG.BZ)
20:03.29 brlcad ISP woes
20:08.47 Notify 03BRL-CAD:carlmoore * 54028 (brlcad/trunk/include/bn.h brlcad/trunk/src/libbn/vectfont.c): Henrikson spelling
20:11.41 Notify 03GCI: Sean: Find and fix at least 10 spelling mistakes in at least 10 different files - latest sources Be sure to use our very latest sources from a Subversion checkout. Good luck! http://www.google-melange.com/gci/task/view/google/gci2012/7959223
20:20.09 Notify 03GCI: BrendenD15: Compile BRL-CAD on Windows using Cygwin - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/7972239
20:20.55 Notify 03GCI: Sean: Compile BRL-CAD on Windows using Cygwin - Task Assigned This task has been assigned to BrendenD15. You have 72 hours to complete this task, good luck! http://www.google-melange.com/gci/task/view/google/gci2012/7972239
20:35.14 Notify 03GCI: BrendenD15: Compile BRL-CAD on Windows using Cygwin - Thanks for the suggestion I'll try what you suggested and try again. http://www.google-melange.com/gci/task/view/google/gci2012/7972239
20:44.47 Notify 03GCI: Sean: Categorize all of BRL-CAD's commands into a spreadsheet - post what you have? Ashish, post what you already have so we can make sure you're on the right track. We don't want you to work for hours only to do something we don't want. http://www.google-melange.com/gci/task/view/google/gci2012/7970237
20:44.48 Notify 03GCI: Sean: Find and fix at least 10 spelling mistakes in at least 10 different files - Task Assigned This task has been assigned to An Ha. You have 48 hours to complete this task, good luck! http://www.google-melange.com/gci/task/view/google/gci2012/7959223
21:23.46 gcimaths brlcad: has anything happened with the new tasks?
21:39.47 *** join/#brlcad zero57 (~an@209.101-ppp.3menatwork.com)
21:40.27 zero57 brlcad: Hi, for the finding and fixing spelling mistakes, would that also count as forgetting to capitalize a word?
21:40.45 zero57 brlcad: Pronouns, such as Canada, United States of America, etc
21:41.35 zero57 brlcad: Also, does grammatical mistakes count too? Such as two "the"'s in a sentence? so "The the cat is running"?
21:54.04 Notify 03GCI: Petar Stanev: Create an artistic screenshot - ask Yesterday when I try to start my computer it shows blue screen,so I send it to the computer store for repair they tell me it's gone be ready next monday . I'm writhing this from my phone and the .g files ,screenshots and original files are on my computer. I realy want to complete this... http://www.google-melange.com/gci/task/view/google/gci2012/8025213
21:54.24 Notify 03GCI: Petar Stanev: Create an artistic screenshot - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/8025213
22:11.53 *** join/#brlcad agkphysics (~agkphysic@118-92-149-45.dsl.dyn.ihug.co.nz)
22:27.30 Notify 03GCI: Sean: Create an artistic screenshot - We can wait We can wait until then. I look forward to seeing the .g file. http://www.google-melange.com/gci/task/view/google/gci2012/8025213
22:28.31 Notify 03GCI: Algorithum: Close MGED when both windows are closed - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/7945212
22:29.06 Notify 03GCI: Algorithum: Close MGED when both windows are closed - Claim Removed The claim on this task has been removed, someone else can claim it now. http://www.google-melange.com/gci/task/view/google/gci2012/7945212
22:31.12 Notify 03GCI: An Ha: Find and fix at least 10 spelling mistakes in at least 10 different files - A few questions Hi, when finding and fixing spelling mistakes, would it count if the word needs to be capitalized? Also, does grammatical mistakes count too? Such as two "the"'s in a sentence? So for example, "The the cat is running"? Also, in the last... http://www.google-melange.com/gci/task/view/google/gci2012/7959223
22:50.58 Notify 03GCI: An Ha: Find and fix at least 10 spelling mistakes in at least 10 different files - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/7959223
22:52.02 *** part/#brlcad zero57 (~an@209.101-ppp.3menatwork.com)
22:58.42 Notify 03BRL-CAD:starseeker * 54029 (brlcad/trunk/misc/CMake/BRLCAD_CompilerFlags.cmake brlcad/trunk/misc/CMake/CompilerFlags.cmake): Needs more testing, but use CMakeParseArguments macro to simplify the CompilerFlags logic. Consolidate the C and CXX macros into a single macro.
23:02.41 *** join/#brlcad starseeker (~starseeke@BZ.BZFLAG.BZ)
23:02.57 starseeker humph
23:56.08 *** join/#brlcad louipc (~louipc@archlinux/fellow/louipc)

Generated by irclog2html.pl Modified by Tim Riker to work with infobot.