| 00:24.59 | Notify | 03GCI: Titi: Compile and run BRL-CAD on a Raspberry Pi - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/8003218 |
| 01:26.41 | *** join/#brlcad zero57 (~an@209.101-ppp.3menatwork.com) | |
| 01:48.22 | zero57 | exit |
| 02:20.06 | *** join/#brlcad bhlegm (~bhlegm@d108-180-27-19.bchsia.telus.net) | |
| 02:27.45 | *** join/#brlcad zero57 (~an@209.101-ppp.3menatwork.com) | |
| 02:28.40 | *** part/#brlcad zero57 (~an@209.101-ppp.3menatwork.com) | |
| 02:29.29 | *** join/#brlcad archivist (~archivist@host81-149-189-98.in-addr.btopenworld.com) | |
| 03:03.44 | brlcad | maths22: not yet, but some should be up in a couple hours |
| 03:36.33 | Notify | 03GCI: Sean: Find and fix at least 10 spelling mistakes in at least 10 different files - he count So, we'll give you the grammatical errors since they're good catches, but not capitalization. There are thousands of places all over the code where statements are intentionally written in all lowercase out of convenience or insignificance.... http://www.google-melange.com/gci/task/view/google/gci2012/7959223 |
| 03:37.23 | Notify | 03GCI: Sean: Find and fix at least 10 spelling mistakes in at least 10 different files - Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once you re-submit... http://www.google-melange.com/gci/task/view/google/gci2012/7959223 |
| 03:40.25 | Notify | 03GCI: Sean: Write a BRL-CAD showcase article - so... No full name, just "John"? See earlier question about how to properly credit you in our authorship documentation and announcements. http://www.google-melange.com/gci/task/view/google/gci2012/8022213 |
| 03:40.30 | Notify | 03GCI: Sean: Write a BRL-CAD showcase article - Task Closed Congratulations, this task has been completed successfully. http://www.google-melange.com/gci/task/view/google/gci2012/8022213 |
| 03:49.17 | Notify | 03GCI: Aaron Keesing: Implement a primitive centroid function ... for hyperboloids of one sheet (HYP) - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/8030210 |
| 03:53.53 | Notify | 03GCI: Ambar Pal: Compile BRL-CAD using GCC 4.8 - Okay Ok I will do that http://www.google-melange.com/gci/task/view/google/gci2012/7982223 |
| 03:55.09 | Notify | 03GCI: Aaron Keesing: Implement a primitive centroid function ... for hyperboloids of one sheet (HYP) - Question Sean, I'm not sure exactly what you mean when you suggest I might be confusing object types. I think I have solved the build crash issue as when I built it it did not come up with any hyp related errors (although I was building it... http://www.google-melange.com/gci/task/view/google/gci2012/8030210 |
| 03:55.24 | *** join/#brlcad caen23 (~caen23@92.81.202.220) | |
| 03:56.24 | Notify | 03GCI: Sean: Compile and run BRL-CAD on a Raspberry Pi - You didn't compile? Titi, the logs you provided only indicate that you ran cmake, but not make. Did you compile BRL-CAD? Please provide that log as well because your benchmark logs indicate there was a problem, but none of the logs indicate what the problem was. Also, you'll want to... http://www.google-melange.com/gci/task/view/google/gci2012/8003218 |
| 03:56.25 | Notify | 03GCI: Sean: Compile and run BRL-CAD on a Raspberry Pi - Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once you re-submit your work. http://www.google-melange.com/gci/task/view/google/gci2012/8003218 |
| 03:56.29 | Notify | 03GCI: Sean: Compile and run BRL-CAD on a Raspberry Pi - Deadline extended The deadline of the task has been extended with 1 days and 0 hours. http://www.google-melange.com/gci/task/view/google/gci2012/8003218 |
| 04:08.23 | Notify | 03GCI: Sean: Implement a primitive centroid function ... for hyperboloids of one sheet (HYP) - difference Aaron, so the distinction comes down to what fields are in a hyp_specific struct and which are in an rt_hyp_internal struct. You do mimic another bit of code, which is probably what caused some misunderstanding earlier. You add half the... http://www.google-melange.com/gci/task/view/google/gci2012/8030210 |
| 04:08.28 | Notify | 03GCI: Sean: Implement a primitive centroid function ... for hyperboloids of one sheet (HYP) - Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once you... http://www.google-melange.com/gci/task/view/google/gci2012/8030210 |
| 05:09.44 | Notify | 03BRL-CAD Wiki:Matt s * 0 /wiki/Special:Log/upload: uploaded a new version of "[[Image:Affine transformations.pdf]]": Typos fixed, source .tex file included as well. |
| 05:11.13 | Notify | 03GCI: Aaron Keesing: Implement a primitive centroid function ... for hyperboloids of one sheet (HYP) - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/8030210 |
| 05:12.50 | Notify | 03BRL-CAD Wiki:Matt s * 4743 /wiki/Image_talk:Affine_transformations.pdf: .tex source file |
| 05:13.09 | Notify | 03GCI: Aaron Keesing: Implement a primitive centroid function ... for hyperboloids of one sheet (HYP) - Issues I think I have fixed all the issues you mentioned. I wasn't sure exactly how to implement the null checking, so I just made it return if either argument was NULL. If this is bad please let me know so I can fix it. Thanks Aaron K http://www.google-melange.com/gci/task/view/google/gci2012/8030210 |
| 05:15.21 | Notify | 03BRL-CAD Wiki:Matt s * 4744 /wiki/Image_talk:Affine_transformations.pdf: |
| 05:26.34 | Notify | 03BRL-CAD Wiki:Matt s * 4745 /wiki/Image_talk:Affine_transformations.pdf: |
| 05:28.16 | Notify | 03BRL-CAD Wiki:Matt s * 0 /wiki/Special:Log/upload: uploaded "[[Image:Volume computation.pdf]]": First draft, may have many mistakes. |
| 05:29.10 | Notify | 03GCI: Matt S.: Implement a primitive volume function ... for hyperboloids of one sheet (HYP) - This may help Then again, it may all be wrong as well. http://brlcad.org/wiki/Image:Volume_computation.pdf http://www.google-melange.com/gci/task/view/google/gci2012/8009213 |
| 06:50.13 | Notify | 03GCI: John: Write a BRL-CAD showcase article - where are those? Can you tell me where to find that documentation? Thanks in advance. http://www.google-melange.com/gci/task/view/google/gci2012/8022213 |
| 08:03.04 | *** join/#brlcad xavortm (xavortm@93.155.146.15) | |
| 09:03.26 | *** join/#brlcad Skriptkid (~Skriptkid@117.202.107.98) | |
| 09:29.39 | Notify | 03GCI: Melange: Create an artistic screenshot - No more Work can be submitted Melange has detected that the deadline has passed and no more work can be submitted. The submitted work should be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/8025213 |
| 09:38.33 | *** join/#brlcad Skriptkid (~Skriptkid@117.202.107.98) | |
| 09:40.22 | Notify | 03GCI: Ashish: Categorize all of BRL-CAD's commands into a spreadsheet - Done But i didnt know which format to put it in ```` cause i asked many times in the IRC but every one was busy and no one answered :( http://www.google-melange.com/gci/task/view/google/gci2012/7970237 |
| 10:20.17 | *** join/#brlcad Silvrous (4f706699@gateway/web/freenode/ip.79.112.102.153) | |
| 10:40.57 | *** join/#brlcad archivist (~archivist@host81-149-189-98.in-addr.btopenworld.com) | |
| 11:00.14 | Skriptkid | ``Erik: Everytime I try to checkout the brlcad src from buildbot, I get a "Server certificate verification failed: issuer is not trusted."(for brlcad.svn.sourceforge.net) Also, there's no 'accept' in buildbot as in the command line version. Can you disable certificate check only for the repo brlcad.svn.sourceforge.net in the svn config file on the server? |
| 11:09.43 | Skriptkid | ``Erik: Not required. I came up with something else |
| 12:01.11 | *** join/#brlcad cristina (~quassel@188.24.79.46) | |
| 12:09.02 | Skriptkid | I'm unable to build the brlcad source on the server because it says the file 'ansidecl.h' is not found. Error occurs in file src/other/xmltools/libxml/include/libxml.h:33. Any solutions? Here's the complete log: http://crit.brlcad.org:8001/builders/runtests/builds/30/steps/shell_4/logs/stdio |
| 12:25.00 | ``Erik | erik@crit ~$ ls -lk /usr/local/include/ansidecl.h |
| 12:25.01 | ``Erik | -r--r--r-- 1 root wheel 14180 Oct 10 12:18 /usr/local/include/ansidecl.h |
| 12:25.17 | Notify | 03GCI: Ashish: Categorize all of BRL-CAD's commands into a spreadsheet - Soo Is it right ?? Am i doing it right?? http://www.google-melange.com/gci/task/view/google/gci2012/7970237 |
| 13:13.03 | ``Erik | hm, togl build failure |
| 13:17.00 | Notify | 03GCI: Petar Stanev: Create an artistic screenshot - Claim Removed The claim on this task has been removed, someone else can claim it now. http://www.google-melange.com/gci/task/view/google/gci2012/8025213 |
| 13:20.43 | Skriptkid | ``Erik: make still isn't finding it. (This might be lame, but) is make configured to look in /usr/local/include? |
| 13:25.42 | ``Erik | should be... how did you generate the makefiles? |
| 13:28.18 | Skriptkid | I didnt. I've configured buildbot to checkout/update brlcad from svn and compile as given on the wiki |
| 13:28.27 | Skriptkid | same commands |
| 13:30.33 | ``Erik | I d'no what the wiki says... there're old automake bits still in the source that are only semi-supported. CMake is the preferred approach now, I'd check to see which one buildbot is using and if it can be forced to use cmake |
| 13:30.58 | ``Erik | if it is using cmake, then the CMakeCache.txt might hold clues, or make VERBOSE=1 |
| 13:32.11 | Skriptkid | so you want buildbot to use cmake instead of make? |
| 13:33.13 | ``Erik | cmake instead of automake, cmake generates the make files |
| 13:34.38 | Skriptkid | oh. For that, I've used cmake. Cmake generated the makefiles. I used make to compile it. |
| 13:35.14 | Skriptkid | http://brlcad.org/wiki/Compiling#Compile' |
| 14:17.15 | Notify | 03GCI: VN: Create an ISST screenshot or animation - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/7945221 |
| 14:20.33 | *** join/#brlcad VN_ (75c85088@gateway/web/freenode/ip.117.200.80.136) | |
| 14:20.52 | Notify | 03GCI: Sean: Create an ISST screenshot or animation - Task Assigned This task has been assigned to VN. You have 48 hours to complete this task, good luck! http://www.google-melange.com/gci/task/view/google/gci2012/7945221 |
| 14:21.05 | VN_ | i have to create a isst screenshot.....where do i get it? |
| 14:22.21 | VN_ | ???.....help |
| 14:23.08 | brlcad | VN_: you have to ask and wait for a response (which might take minutes or hours, be patient) |
| 14:23.23 | brlcad | see http://brlcad.org/wiki/IRC etiquette |
| 14:23.36 | brlcad | then go to http://brlcad.org/wiki/Deuces to get started |
| 14:25.27 | VN_ | what is isst ? |
| 14:26.03 | Notify | 03GCI: Sean: Create an artistic screenshot - would you like us to hold it? We'll hold the task until Tuesday. Let us know if there's a delay or other problem so we can keep others from completing the task in the meantime. http://www.google-melange.com/gci/task/view/google/gci2012/8025213 |
| 14:26.45 | brlcad | VN_: there are over 400 tools in brl-cad, isst is one of them |
| 14:26.59 | brlcad | you need to build and install brl-cad, then run that tool |
| 14:27.18 | brlcad | did you read the task description? it includes that information |
| 14:27.30 | brlcad | we don't write that for fun... expected to read it in full ;) |
| 14:30.14 | *** join/#brlcad Ashish101 (75c22243@gateway/web/freenode/ip.117.194.34.67) | |
| 14:33.42 | Ashish101 | hello can anyone check the file and tell if this is what i should be doing ?? |
| 14:33.43 | Ashish101 | http://www.google-melange.com/gci/task/view/google/gci2012/7970237 |
| 14:37.04 | VN_ | will brlcad be releasing a second wave of tasks for the students and when would it be?? |
| 14:41.47 | brlcad | VN_: we've been steadily releasing new tasks, but yes there is another huge wave coming |
| 14:42.54 | VN_ | thanks a lot... |
| 14:44.28 | Ashish101 | brlcad: should i continue wit my work or am i doing it all wrong !! |
| 14:58.09 | *** join/#brlcad Ashish101 (75c22243@gateway/web/freenode/ip.117.194.34.67) | |
| 15:03.20 | Skriptkid | brlcad: check out crit.brlcad.org:8001 :) Tell me how the progress is and what needs to be done further |
| 15:04.21 | Skriptkid | (except of course the problem I'm having with make) |
| 15:05.13 | brlcad | Ashish101: hold on that task, needs some redirection... |
| 15:05.28 | Ashish101 | OK.. |
| 15:05.30 | brlcad | Skriptkid: after food, bbs :) |
| 15:05.39 | Skriptkid | no problemo :) |
| 15:06.09 | Ashish101 | KK brlcad: before u go how much time am i expected to wait before i can continue my task ?? |
| 15:06.40 | Ashish101 | Till thn i coulod go out and get some air and maybe play wit my bro :) |
| 15:13.32 | *** join/#brlcad merzo (~merzo@108-166-132-95.pool.ukrtel.net) | |
| 15:34.59 | VN_ | i have downloaded brl cad on my macbook pro..i know how to take a screen shot...what exactly do i have to do now....just go to isst and create an interesting screen shot ? #GCI |
| 15:38.36 | VN_ | pls help... |
| 15:38.41 | Notify | 03GCI: Ambar Pal: Compile BRL-CAD using GCC 4.8 - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/7982223 |
| 15:48.31 | Ashish101 | VN: Skitch-- try it |
| 15:50.41 | brlcad | Ashish101: wait times are always variable and supposed to be passive (you did read the wiki/IRC page, right?) ... do what you need to do, what you can do, don't ever just wait |
| 15:51.00 | brlcad | unless you want to, but if you get frustrated or bored, it's on you :) |
| 15:51.09 | Ashish101 | KK :) |
| 15:52.13 | *** join/#brlcad zero57 (~an@209.101-ppp.3menatwork.com) | |
| 15:54.38 | *** join/#brlcad Skriptkid (~Skriptkid@117.202.107.98) | |
| 16:14.01 | Skriptkid | brlcad: Saw??(Sorry if you're still eating) |
| 16:35.23 | ``Erik | add a little proxy fu, and http://crit.brlcad.org/buildbot/ |
| 16:39.51 | Skriptkid | thanks :) |
| 16:41.17 | Notify | 03GCI: Harsh Vardhan: Reproduce any 10 unconfirmed open bug reports - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/7971223 |
| 16:46.29 | Notify | 03GCI: Harsh Vardhan: Reproduce any 10 unconfirmed open bug reports - query I just have to upload 10 bugs that are not confirmed.?? http://www.google-melange.com/gci/task/view/google/gci2012/7971223 |
| 16:51.45 | *** join/#brlcad zero57_ (~an@209.101-ppp.3menatwork.com) | |
| 16:55.12 | Notify | 03GCI: Shayantan: Layout "MGED Interface" Reference Document - Sorry I Completely Misunderstood the task cause i didnt have adobe reader to view the pdf files. very sorry. now t hat i have it, i can accomplish the task. can you please extend my deadline further ? http://www.google-melange.com/gci/task/view/google/gci2012/7953233 |
| 17:05.20 | Notify | 03GCI: Harsh Vardhan: Find and fix at least 20 spelling mistakes in at least 5 different files - files from which files do i have to find spelling mistakes?? http://www.google-melange.com/gci/task/view/google/gci2012/8033204 |
| 17:05.21 | Notify | 03GCI: Harmanpreet Singh: Layout "MGED Interface" Reference Document - Deadline extended The deadline of the task has been extended with 1 days and 0 hours. http://www.google-melange.com/gci/task/view/google/gci2012/7953233 |
| 17:57.37 | Notify | 03GCI: Skriptkid: Set up BuildBot continuous integration for BRL-CAD - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/8006217 |
| 17:58.07 | Notify | 03GCI: An Ha: Find and fix at least 10 spelling mistakes in at least 10 different files - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/7959223 |
| 17:59.12 | Notify | 03GCI: Sean: Reproduce any 10 unconfirmed open bug reports - Task Reopened This task has been Reopened. http://www.google-melange.com/gci/task/view/google/gci2012/7971223 |
| 17:59.27 | Notify | 03GCI: Sean: Reproduce any 10 unconfirmed open bug reports - Task Assigned This task has been assigned to Harsh Vardhan. You have 48 hours to complete this task, good luck! http://www.google-melange.com/gci/task/view/google/gci2012/7971223 |
| 17:59.47 | Notify | 03GCI: Skriptkid: Set up BuildBot continuous integration for BRL-CAD - Bug There seems to be a bug in file src/other/togl/src/glew/glew.c. Some functions are undeclared in the file, which is why it's not being built. But the Buildbot system is installed and rolling fine. http://crit.brlcad.org/buildbot/. http://www.google-melange.com/gci/task/view/google/gci2012/8006217 |
| 18:00.08 | Notify | 03GCI: Sean: Reproduce any 10 unconfirmed open bug reports - oops Sorry, Harsh! The website wasn't responding and a second click unassigned the task. http://www.google-melange.com/gci/task/view/google/gci2012/7971223 |
| 18:01.29 | Notify | 03GCI: Sean: Reproduce any 10 unconfirmed open bug reports - and no you don't have to upload anything. We have many bugs already reported. See the reference link, our Sourceforge bugs page. The task involves going though that list and confirming that you can reproduce 10 of them. http://www.google-melange.com/gci/task/view/google/gci2012/7971223 |
| 18:12.52 | Notify | 03GCI: Sean: Layout "MGED Interface" Reference Document - Deadline extended The deadline of the task has been extended with 1 days and 0 hours. http://www.google-melange.com/gci/task/view/google/gci2012/7953233 |
| 18:13.57 | Notify | 03GCI: Sean: Find and fix at least 20 spelling mistakes in at least 5 different files - read the comment history Harsh, you need to read the comment history. This has already been answered. http://www.google-melange.com/gci/task/view/google/gci2012/8033204 |
| 18:17.34 | Skriptkid | Can someone please help with this: |
| 18:17.38 | Skriptkid | 4%] Building C object src/other/togl/src/CMakeFiles/togl.dir/glew/glew.c.o |
| 18:17.39 | Skriptkid | /usr/home/gciscriptkid/public_html/slave/brlcad-tester/build/src/other/togl/src/glew/glew.c:1866: error: expected '=', ',', ';', 'asm' or '__attribute__' before '__glewBufferRegionEnabledEXT' |
| 18:17.39 | Skriptkid | /usr/home/gciscriptkid/public_html/slave/brlcad-tester/build/src/other/togl/src/glew/glew.c:1867: error: expected '=', ',', ';', 'asm' or '__attribute__' before '__glewDeleteBufferRegionEXT' |
| 18:17.39 | Skriptkid | /usr/home/gciscriptkid/public_html/slave/brlcad-tester/build/src/other/togl/src/glew/glew.c:1868: error: expected '=', ',', ';', 'asm' or '__attribute__' before '__glewDrawBufferRegionEXT' |
| 18:17.39 | Skriptkid | /usr/home/gciscriptkid/public_html/slave/brlcad-tester/build/src/other/togl/src/glew/glew.c:1869: error: expected '=', ',', ';', 'asm' or '__attribute__' before '__glewNewBufferRegionEXT' |
| 18:17.39 | Skriptkid | /usr/home/gciscriptkid/public_html/slave/brlcad-tester/build/src/other/togl/src/glew/glew.c:1870: error: expected '=', ',', ';', 'asm' or '__attribute__' before '__glewReadBufferRegionEXT' |
| 18:17.39 | Skriptkid | /usr/home/gciscriptkid/public_html/slave/brlcad-tester/build/src/other/togl/src/glew/glew.c: In function '_glewInit_GL_KTX_buffer_region': |
| 18:17.41 | Skriptkid | /usr/home/gciscriptkid/public_html/slave/brlcad-tester/build/src/other/togl/src/glew/glew.c:6503: error: 'glBufferRegionEnabledEXT' undeclared (first use in this function) |
| 18:17.41 | Skriptkid | /usr/home/gciscriptkid/public_html/slave/brlcad-tester/build/src/other/togl/src/glew/glew.c:6503: error: (Each undeclared identifier is reported only once |
| 18:17.41 | Skriptkid | /usr/home/gciscriptkid/public_html/slave/brlcad-tester/build/src/other/togl/src/glew/glew.c:6503: error: for each function it appears in.) |
| 18:17.41 | Skriptkid | /usr/home/gciscriptkid/public_html/slave/brlcad-tester/build/src/other/togl/src/glew/glew.c:6503: error: 'PFNGLBUFFERREGIONENABLEDEXTPROC' undeclared (first use in this function) |
| 18:17.42 | Skriptkid | /usr/home/gciscriptkid/public_html/slave/brlcad-tester/build/src/other/togl/src/glew/glew.c:6504: error: 'glDeleteBufferRegionEXT' undeclared (first use in this function) |
| 18:17.42 | Skriptkid | /usr/home/gciscriptkid/public_html/slave/brlcad-tester/build/src/other/togl/src/glew/glew.c:6504: error: 'PFNGLDELETEBUFFERREGIONEXTPROC' undeclared (first use in this function) |
| 18:17.43 | Skriptkid | /usr/home/gciscriptkid/public_html/slave/brlcad-tester/build/src/other/togl/src/glew/glew.c:6505: error: 'glDrawBufferRegionEXT' undeclared (first use in this function) |
| 18:18.08 | Skriptkid | whole thing is here: http://crit.brlcad.org/buildbot/builders/brlcad-tester/builds/7/steps/shell_2/logs/stdio |
| 18:21.25 | Notify | 03GCI: Harsh Vardhan: Reproduce any 10 unconfirmed open bug reports - .. "reproduce" means that I have to post the names of bugs that are not confirmed.?? http://www.google-melange.com/gci/task/view/google/gci2012/7971223 |
| 18:23.15 | Notify | 03GCI: Skriptkid: Set up BuildBot continuous integration for BRL-CAD - Make log http://crit.brlcad.org/buildbot/builders/brlcad-tester/builds/7/steps/shell_2/logs/stdio The bug's there at the end http://www.google-melange.com/gci/task/view/google/gci2012/8006217 |
| 18:26.56 | Notify | 03GCI: Sean: Write a BRL-CAD showcase article - I can Of course I can. However, I've asked you a question several times now and you keep ignoring it... If you want to remain anonymous, THAT IS FINE. Just say so. I completely understand the desire to protect your identity and maintain privacy. If you provide your full name, it'll potentially... http://www.google-melange.com/gci/task/view/google/gci2012/8022213 |
| 18:29.58 | Notify | 03GCI: Sean: Reproduce any 10 unconfirmed open bug reports - no No. You have to read the bug, understand what it means, compile and run BRL-CAD, and see if you observe the same bad behavior that was reported. You have to find 10 bugs that you CAN confirm are still bugs by running the tools. http://www.google-melange.com/gci/task/view/google/gci2012/7971223 |
| 18:36.42 | *** join/#brlcad Skriptkid (~Skriptkid@117.202.107.98) | |
| 18:41.20 | *** join/#brlcad archivist (~archivist@host81-149-189-98.in-addr.btopenworld.com) | |
| 18:48.04 | Notify | 03GCI: Sean: Set up BuildBot continuous integration for BRL-CAD - Task Closed Congratulations, this task has been completed successfully. http://www.google-melange.com/gci/task/view/google/gci2012/8006217 |
| 18:48.05 | Notify | 03GCI: John: Write a BRL-CAD showcase article - I'll remain anonymous Ahh! Finaly I understood what you wanted. Then I'll remain semi-anonymous, using only the name John. Sorry for the misunderstanding. http://www.google-melange.com/gci/task/view/google/gci2012/8022213 |
| 18:50.25 | Skriptkid | Brlcad: so it's good? :) |
| 18:50.49 | Skriptkid | (Good enough at least?) |
| 18:52.40 | Notify | 03GCI: Sean: Find and fix at least 10 spelling mistakes in at least 10 different files - which three? Which three others did you find? I see sigle and acutal but what's the third? http://www.google-melange.com/gci/task/view/google/gci2012/7959223 |
| 19:02.05 | *** join/#brlcad Skriptkid1 (~Skriptkid@117.202.107.98) | |
| 19:02.08 | Notify | 03GCI: Skriptkid: Set up BuildBot continuous integration for BRL-CAD - Cleaned up Cleaned up my account. Only the buildmaster and slave dirs are there. Deleted everthing else. They both are in public_html. Also, the master is listening on port 8001 and slave on 8090(All info is in master.cfg, in which I've changed the comments according to... http://www.google-melange.com/gci/task/view/google/gci2012/8006217 |
| 19:15.06 | Notify | 03GCI: Silvrous: Add a primitive surface area function ... for right hyperbolic cylinders (RHC) - breadth vector What does the breadth vector signify, exactly? Is its magnitude the distance from the vertex to the back rectangle? http://www.google-melange.com/gci/task/view/google/gci2012/7982218 |
| 19:16.13 | Notify | 03GCI: Skriptkid: Investigate performance of setting thread affinity - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/7960222 |
| 19:17.58 | Notify | 03GCI: Sean: Compile BRL-CAD using GCC 4.8 - Task Closed Congratulations, this task has been completed successfully. http://www.google-melange.com/gci/task/view/google/gci2012/7982223 |
| 19:21.44 | Notify | 03GCI: Sean: Implement a primitive centroid function ... for hyperboloids of one sheet (HYP) - nope, that's good What you did looks good now. Thanks for going through the revisions to get it fixed up! http://www.google-melange.com/gci/task/view/google/gci2012/8030210 |
| 19:21.58 | *** join/#brlcad Skriptkid (~Skriptkid@117.202.107.98) | |
| 19:22.44 | Notify | 03GCI: Sean: Implement a primitive centroid function ... for hyperboloids of one sheet (HYP) - Task Closed Congratulations, this task has been completed successfully. http://www.google-melange.com/gci/task/view/google/gci2012/8030210 |
| 19:22.58 | brlcad | Skriptkid: yep, that's good enough for now -- most of the task was to get it set up |
| 19:23.15 | brlcad | the problems you ran into are easily overcome with cmake settings that should have been added |
| 19:23.28 | brlcad | and one of the errors was in the script you wrote (mkdir existing dir) |
| 19:24.19 | brlcad | but we'll just add another task to fix up the tests/scripts to be something different |
| 19:24.38 | brlcad | the glew error should be fixed independently, perhaps yet another task |
| 19:26.26 | Notify | 03GCI: Sean: Investigate performance of setting thread affinity - Task Assigned This task has been assigned to Skriptkid. You have 72 hours to complete this task, good luck! http://www.google-melange.com/gci/task/view/google/gci2012/7960222 |
| 19:26.50 | Skriptkid | Ok. Thanks for the help along the way :) |
| 19:31.07 | Notify | 03GCI: Sean: Write a BRL-CAD showcase article - you should ask OK. Glad to have that finally sorted out. For future reference, please say you don't understand or ask for clarification when you don't understand. Otherwise, it will easily be perceived as being rude, and I'm sure that's not your intention or desire. http://www.google-melange.com/gci/task/view/google/gci2012/8022213 |
| 21:18.58 | brlcad | makes a delicious cup of mochaspresso |
| 21:25.14 | Notify | 03GCI: Alex Ozer: Create a utility library (LIBBU) API unit test ... for hash.c - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/8031205 |
| 21:27.50 | Notify | 03GCI: An Ha: Find and fix at least 10 spelling mistakes in at least 10 different files - The third one is sigle-click The third one is sigle-click, which should be single-click http://www.google-melange.com/gci/task/view/google/gci2012/7959223 |
| 21:28.45 | Notify | 03GCI: An Ha: Find and fix at least 10 spelling mistakes in at least 10 different files - If you want... If you want, I can find one more if you don't accept that one as another spelling mistake. http://www.google-melange.com/gci/task/view/google/gci2012/7959223 |
| 21:30.20 | Notify | 03GCI: Mrowqa: Doxygen cleanup ... for LIBBN - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/8031203 |
| 21:43.40 | Notify | 03GCI: Sean: Categorize all of BRL-CAD's commands into a spreadsheet - have to stay on IRC If you read http://brlcad.org/wiki/IRC you'll notice one of the etiquette expectations of IRC is to be patient. I know a couple of times when someone attempted to respond to you and you'd already disconnected from IRC. People that use IRC are often... http://www.google-melange.com/gci/task/view/google/gci2012/7970237 |
| 21:43.50 | Notify | 03GCI: Sean: Categorize all of BRL-CAD's commands into a spreadsheet - Deadline extended The deadline of the task has been extended with 1 days and 0 hours. http://www.google-melange.com/gci/task/view/google/gci2012/7970237 |
| 21:44.25 | Notify | 03GCI: Sean: Create a utility library (LIBBU) API unit test ... for hash.c - Task Assigned This task has been assigned to Alex Ozer. You have 48 hours to complete this task, good luck! http://www.google-melange.com/gci/task/view/google/gci2012/8031205 |
| 21:47.56 | Notify | 03GCI: Sean: Find and fix at least 10 spelling mistakes in at least 10 different files - all good Nope, that's all good. I just couldn't find it. The src/other changes don't count as they're not our sources to modify, but that one was fortunately also in one of our files. Nicely done. Approximately how long did it take you to find and fix... http://www.google-melange.com/gci/task/view/google/gci2012/7959223 |
| 21:48.01 | Notify | 03GCI: Sean: Find and fix at least 10 spelling mistakes in at least 10 different files - Task Closed Congratulations, this task has been completed successfully. http://www.google-melange.com/gci/task/view/google/gci2012/7959223 |
| 21:59.54 | Notify | 03GCI: Sean: Add a primitive surface area function ... for right hyperbolic cylinders (RHC) - see appendix C Near the end of our Intro to MGED is an appendix C that provides a graphical depiction of the RHC's parameters. There you can see what B is in terms of the object's shape. The B vector is described in more mathematical terms at the top... http://www.google-melange.com/gci/task/view/google/gci2012/7982218 |
| 22:02.31 | Notify | 03GCI: An Ha: Find and fix at least 10 spelling mistakes in at least 10 different files - The time it took The time it took me for those 10 mistakes and 10 files was about 5-6 hours just quickly skimming through the files via vim and the spell check feature it has :) The other task I did was 5 mistakes and 40 files and that was in total... http://www.google-melange.com/gci/task/view/google/gci2012/7959223 |
| 22:10.59 | Notify | 03GCI: Sean: Find and fix at least 10 spelling mistakes in at least 10 different files - excellent Thanks for the information. It sounds like the tasks are roughly scoped appropriately. I hope that once you found a mistake, you ran a recursive grep on our files to find multiple occurences. ;) http://www.google-melange.com/gci/task/view/google/gci2012/7959223 |
| 22:19.04 | *** join/#brlcad matt_s (~Matt@120.21.243.205) | |
| 22:28.54 | matt_s | Testing if this mobile client works. I know, poor etiquette... |
| 22:33.44 | *** join/#brlcad bhlegm (~bhlegm@d108-180-27-19.bchsia.telus.net) | |
| 22:35.06 | brlcad | matt_s: it's alright ;) |
| 22:35.32 | brlcad | getting set up with a proper client isn't poor etiquette |
| 22:36.14 | brlcad | starseeker: unless I'm mistaken, it looks like all three appendices aren't included |
| 22:45.02 | Notify | 03GCI: An Ha: Find and fix at least 10 spelling mistakes in at least 10 different files - Yes Yeah, I just ran find and sed and it will do the rest for me :) http://www.google-melange.com/gci/task/view/google/gci2012/7959223 |
| 22:55.50 | *** join/#brlcad matt_s (~Matt@120.20.246.237) | |
| 23:01.41 | starseeker | brlcad: you mean in Volume II? |