| 01:14.31 | *** join/#brlcad bhlegm (~bhlegm@d108-180-27-19.bchsia.telus.net) | |
| 02:04.25 | Notify | 03GCI: Sharan: Create the BRL-CAD Logo in BRL-CAD (#3) - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/7993222 |
| 03:58.26 | Notify | 03GCI: javamonn: Make tables.c not call system("cat ...") - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/7966235 |
| 04:01.47 | Notify | 03GCI: javamonn: Make tables.c not call system("cat ...") - Hopefully... Hopefully tables4 is alright. That bu_mapped_file struct is pretty handy. To my understanding, I still had to open the file to write to in the normal fasion, correct? Unless you have another struct I would rather use, since bu_mapped_file is read only. Let me know if... http://www.google-melange.com/gci/task/view/google/gci2012/7966235 |
| 04:04.43 | Notify | 03GCI: Sean: Create the BRL-CAD Logo in BRL-CAD (#3) - Task Assigned This task has been assigned to Sharan. You have 72 hours to complete this task, good luck! http://www.google-melange.com/gci/task/view/google/gci2012/7993222 |
| 05:11.46 | *** join/#brlcad harmanpreet (~chatzilla@202.164.53.117) | |
| 05:46.04 | Notify | 03GCI: Melange: Implement mutex locking for Windows - No more Work can be submitted Melange has detected that the deadline has passed and no more work can be submitted. The submitted work should be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/7999206 |
| 06:07.37 | Notify | 03GCI: Melange: Add a primitive surface area function ... for elliptical hyperboloids (EHY) - Task Reopened Melange has detected that the final deadline has passed and it has reopened the task. http://www.google-melange.com/gci/task/view/google/gci2012/7970238 |
| 06:20.07 | *** part/#brlcad matt_s (cb3af1be@gateway/web/freenode/ip.203.58.241.190) | |
| 07:42.39 | *** join/#brlcad harmanpreet (~chatzilla@202.164.53.117) | |
| 08:28.54 | *** join/#brlcad d_rossberg (~rossberg@BZ.BZFLAG.BZ) | |
| 09:12.30 | Notify | 03GCI: Mrowqa: Doxygen cleanup ... for LIBBN - Which doxygen output? I don't know what you mean 'doxygen output', so I uploaded generated documentation and output from console by: brlcad@brlcad-vm:~/brlcad-svn$ doxygen misc/Doxyfile 2> doxygen.output Stdout is clear, all output from console is in stderr. http://www.google-melange.com/gci/task/view/google/gci2012/8031203 |
| 09:46.24 | *** join/#brlcad harmanpreet (~chatzilla@202.164.53.117) | |
| 10:12.24 | Notify | 03GCI: Daniel Rossberg: Implement mutex locking for Windows - I can't apply your patch because it refers to files I don't have ;) Desktop/semaphore.old.c Desktop/semaphore.c Please modify the file inside your subversion checkout (ie src/libbu/semaphore.c). Subversion will take care of your lokal changes and should generate a nice patchfile... http://www.google-melange.com/gci/task/view/google/gci2012/7999206 |
| 10:12.39 | Notify | 03GCI: Daniel Rossberg: Implement mutex locking for Windows - Deadline extended The deadline of the task has been extended with 1 days and 0 hours. http://www.google-melange.com/gci/task/view/google/gci2012/7999206 |
| 10:12.44 | Notify | 03GCI: Daniel Rossberg: Implement mutex locking for Windows - Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once you re-submit your work. http://www.google-melange.com/gci/task/view/google/gci2012/7999206 |
| 10:12.59 | Notify | 03GCI: Aaron Keesing: Implement a primitive volume function ... for hyperboloids of one sheet (HYP) - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/7987216 |
| 10:14.46 | Notify | 03GCI: Aaron Keesing: Implement a primitive volume function ... for hyperboloids of one sheet (HYP) - Identical Task I noticed there was another identically named and described task as well, so what is the difference between this one and that one? Aaron K http://www.google-melange.com/gci/task/view/google/gci2012/7987216 |
| 10:17.18 | *** join/#brlcad agkphysics (~agkphysic@118-93-169-70.dsl.dyn.ihug.co.nz) | |
| 10:19.23 | Notify | 03GCI: Daniel Rossberg: Investigate performance of setting thread affinity - Could you please provide the output of 'benchmark' too Ie we need 2 outputs: benchmark with and without your changes to parallel.c http://www.google-melange.com/gci/task/view/google/gci2012/7960222 |
| 10:19.28 | Notify | 03GCI: Daniel Rossberg: Investigate performance of setting thread affinity - Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once you re-submit your work. http://www.google-melange.com/gci/task/view/google/gci2012/7960222 |
| 10:24.33 | *** join/#brlcad PrezKennedy (~DarkCalf@173.231.40.98) | |
| 10:25.24 | Notify | 03GCI: Harmanpreet Singh: Implement a primitive volume function ... for hyperboloids of one sheet (HYP) - Task Assigned This task has been assigned to Aaron Keesing. You have 72 hours to complete this task, good luck! http://www.google-melange.com/gci/task/view/google/gci2012/7987216 |
| 10:57.50 | *** join/#brlcad Skriptkid (~Skriptkid@117.202.109.244) | |
| 10:59.46 | Notify | 03GCI: Skriptkid: Investigate performance of setting thread affinity - Function Where should the function for setting the affinity be called in parallel.c? At the beginning? At the end? http://www.google-melange.com/gci/task/view/google/gci2012/7960222 |
| 11:05.59 | Skriptkid | In order to compile a program that uses threading, I need to use -lpthread in gcc. But if I'm adding a threading function to a brlcad file, Make fails since the -lpthread flag is not passed. How do I pass it to make? Or what else can be done to solve this? |
| 11:06.21 | *** join/#brlcad harmanpreet (~chatzilla@124.253.219.160) | |
| 11:17.33 | *** join/#brlcad archivist (~archivist@host81-149-189-98.in-addr.btopenworld.com) | |
| 11:20.29 | Skriptkid | Don't bother answering that. Got it. |
| 11:39.27 | *** join/#brlcad archivist (~archivist@host81-149-189-98.in-addr.btopenworld.com) | |
| 11:44.31 | Notify | 03GCI: Daniel Rossberg: Implement a primitive volume function ... for hyperboloids of one sheet (HYP) - Duplicate task Aaron, I don't know whats the difference between these two tasks. I think, the intention was to split this task in two or more parts becasuse of the mathematical difficulty. You should know that a HYP is something similar to... http://www.google-melange.com/gci/task/view/google/gci2012/7987216 |
| 11:45.25 | Skriptkid | ``Erik brlcad: Can you turn on compiling Tcl, Tk, libpng, libregex and zlib on in Cmake on the server? These are off and I highly doubt this is causing make to fail. |
| 11:50.30 | Skriptkid | d_rossberg: Where should I call the affinity setting function in parallel.c? |
| 11:51.04 | Skriptkid | ``Erik brlcad: Make to fail in the buildbot, that is. |
| 12:13.08 | d_rossberg | Skriptkid: i'm not sure, in something what is called by the benchmark, probable in the rt program (?) |
| 12:14.41 | Skriptkid | Semaphore is called I think,, because it has a semaphore initialisation function. I'll put in that? |
| 12:15.40 | d_rossberg | or in the function parameter of bzu_parallel() ? |
| 12:15.58 | d_rossberg | bu_parallel() |
| 12:17.15 | Skriptkid | ok |
| 12:19.13 | Skriptkid | Could you please xplain the format for passing the function as a pramter to bu_parallel? I see this: "void (*func)(int, genptr_t)" |
| 12:21.05 | d_rossberg | you should use an existing call (e.g. grep for bu_parallel in src/rt) and add your fubction to the function used there |
| 12:22.04 | Skriptkid | I found bu_parallel. It's in src/libbu/parallel.c. Do i just add a call to my function in that? |
| 12:23.48 | d_rossberg | no, bu_parallel() creates the threads but isn't called by any of these threads |
| 12:24.31 | Skriptkid | OK. There are 2 other bu_parallels in src/rt. I just need to write my function in one of these two files(they are in) and call it from bu_parallel? |
| 12:25.30 | Skriptkid | hang on. Are you saying bu_parallel is used to create threads and I need to create one for this? |
| 12:25.57 | Skriptkid | bu_parallel(myfunction)? |
| 12:26.50 | d_rossberg | yes, bu_parallel _creates_ the threads but you function (as you wrote it) has to be called inside of the thread, therefore inside of "myfunction" |
| 12:28.31 | Skriptkid | in worker.c, I see "bu_parallel(worker, npsw, NULL);" So this means that bu_parallel is creating a thread for the function "worker()" right? So I need to call my function in worker so that it will be run |
| 12:29.46 | d_rossberg | exactly |
| 12:29.51 | Skriptkid | ok. thanks :) |
| 12:32.33 | d_rossberg | maybe you should do the same with reproject_worker and see if this has any effect to the benchmark |
| 12:33.37 | Skriptkid | ok. But the function I'll be using has to be in the files I'm calling it in right? I need to put my function in worker.c so that it's called by worker() |
| 12:35.05 | d_rossberg | yes |
| 12:36.36 | Skriptkid | there's a function in parallel.c that gives maximum no of CPUs on the system. Can I directly call it in worker.c?(This is stupid, but asked because bu_parallel has been used here, although it's in parallel.c) |
| 12:38.31 | d_rossberg | this should be ok |
| 12:41.49 | Skriptkid | Is there any specific place I need to call the function on in worker.c and reproject_worker()? Like at the beginning or at the end? |
| 12:41.53 | Skriptkid | *worker() |
| 12:44.47 | d_rossberg | probable at the beginning |
| 12:45.34 | d_rossberg | (i hope it's all right i'm telling you here) |
| 12:46.22 | Skriptkid | Why wouldn't it be? |
| 12:48.06 | d_rossberg | e.g. i don't really know what benchmark does, i think it calles rt, what else should it do? ... it's on you to find out ;) |
| 12:49.03 | Skriptkid | Hehe :) I think it does, because it finds speeds of rays |
| 13:00.55 | Skriptkid | d_rossberg: Are reductions in time by milliseconds significant in raytracing? |
| 13:05.11 | d_rossberg | no, especially as you aren't on a realtime OS |
| 13:07.42 | Skriptkid | Okay. Thanks for all the help. Could you review my work if you're free? |
| 13:08.09 | Notify | 03GCI: Skriptkid: Investigate performance of setting thread affinity - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/7960222 |
| 13:12.37 | Notify | 03BRL-CAD:bob1961 * 54033 brlcad/trunk/src/tclscripts/archer/SketchEditFrame.tcl: Added code to save things back to the database. Added line creation to Archer's sketch editor. More mods to come. |
| 14:10.03 | *** join/#brlcad harmanpreet (~chatzilla@124.253.17.150) | |
| 14:18.49 | *** join/#brlcad PrezKennedy (~DarkCalf@2002:ade7:2862::ade7:2862) | |
| 14:32.22 | *** join/#brlcad merzo (~merzo@240-191-133-95.pool.ukrtel.net) | |
| 14:57.18 | *** join/#brlcad merzo (~merzo@250-198-132-95.pool.ukrtel.net) | |
| 15:36.10 | *** join/#brlcad n_reed (~molto_cre@BZ.BZFLAG.BZ) | |
| 15:53.52 | *** join/#brlcad Skriptkid (~Skriptkid@117.202.109.244) | |
| 15:57.55 | Skriptkid | d_rossberg: How can I not include pthread.h? It won't compile without that. |
| 16:00.26 | *** join/#brlcad harmanpreet (~chatzilla@124.253.17.150) | |
| 16:05.16 | d_rossberg | it's already there? (line 155) |
| 16:07.43 | Skriptkid | Oh, so you mean I need to write function in parallel.c(where line 155 has pthread.h) and call it in worker.c and view.c? On it. |
| 16:16.31 | Skriptkid | d_rossberg: Fixed it. Could you apply the new patch and see it? |
| 16:18.51 | d_rossberg | Skriptkid: you provided a patch for parallel.c so i thought your function was in this file ... ??? |
| 16:20.22 | Skriptkid | That was the old one. The latest was the .tar.gz file. The current latest patch 'new.patch'. Dont apply the last to. Apply 'new.patch' Also, I'll be submitting a new benchmark comparison file, because I made a change |
| 16:30.18 | *** join/#brlcad maths22 (~gcimaths@66-118-151-70.static.sagonet.net) | |
| 16:47.14 | *** join/#brlcad jordisayol (~jordisayo@unaffiliated/jordisayol) | |
| 17:04.10 | brlcad | bunch of new tasks added yesterday: test our animation system, merge git repo, implement a gethostname function, and three code cleanup tasks |
| 17:10.25 | caen23 | brlcad: have you had time to look over my commits? :D |
| 17:11.15 | *** join/#brlcad Skriptkid (~Skriptkid@117.202.109.244) | |
| 17:17.59 | jordisayol | I'm getting a problem with archer when I try to open a *.g file in a read only folder. |
| 17:19.48 | jordisayol | I got this: |
| 17:19.48 | jordisayol | /usr/brlcad/share/db $ /usr/brlcad/bin/archer moss.g |
| 17:19.48 | jordisayol | BBBBogusArcherTargetCopy~: Permission denied |
| 17:19.48 | jordisayol | _ged_open_dbip: failed to create BBBBogusArcherTargetCopy~ |
| 17:19.48 | jordisayol | Unable to open geometry database: BBBBogusArcherTargetCopy~ |
| 17:19.48 | jordisayol | Unexpected error encountered while running Archer. |
| 17:19.48 | jordisayol | Aborting. |
| 17:20.49 | jordisayol | mged program simply open it as read only without problems: |
| 17:20.53 | jordisayol | /usr/brlcad/share/db $ /usr/brlcad/bin/mged moss.g |
| 17:20.53 | jordisayol | Opened in READ ONLY mode |
| 17:22.22 | brlcad | jordisayol: nice, that's a bug |
| 17:22.32 | brlcad | caen23: nope |
| 17:22.54 | brlcad | caen23: and I probably won't for quite a while, I have a ton more new tasks to add |
| 17:23.37 | caen23 | brlcad: ok :D there's no rush |
| 17:27.54 | *** join/#brlcad Skriptkid (~Skriptkid@117.202.109.244) | |
| 17:32.46 | ``Erik | git repo? |
| 17:35.32 | brlcad | ``Erik: writing a tutorial to help with the stepcode merge |
| 17:35.48 | brlcad | http://www.google-melange.com/gci/task/view/google/gci2012/7992230 |
| 17:42.46 | brlcad | new task: fix llvm defects: http://www.google-melange.com/gci/task/view/google/gci2012/7987232 |
| 17:43.22 | brlcad | new task: cmake case cleanup: http://www.google-melange.com/gci/task/view/google/gci2012/7985244 |
| 17:46.02 | *** join/#brlcad maths222 (~maths22@173-167-152-209-illinois.hfc.comcastbusiness.net) | |
| 17:46.27 | maths22 | brlcad: are any new web tasks up? |
| 17:46.35 | Notify | 03BRL-CAD Wiki:Jacksixb * 4748 /wiki/User:Jacksixb/Independent_Study_2012-13_Log: |
| 17:46.38 | Notify | 03BRL-CAD Wiki:Jacksixb * 4749 /wiki/User:Jacksixb/Independent_Study_2012-13_Log: |
| 17:46.40 | Notify | 03BRL-CAD Wiki:Jacksixb * 4750 /wiki/User:Jacksixb/Proposal: Intial make |
| 17:46.42 | Notify | 03BRL-CAD Wiki:Jacksixb * 4751 /wiki/User:Jacksixb/Proposal: |
| 17:46.44 | Notify | 03BRL-CAD Wiki:Jacksixb * 4752 /wiki/User:Jacksixb/Independent_Study_2012-13_Log: update |
| 17:46.45 | Notify | 03GCI: Daniel Rossberg: Investigate performance of setting thread affinity - I looks like your patch works in general However ther are some shortfalls You shouldn't include pthread.h again. Especially not protected with defines. The code will be compiled with MS Visual C/C++ too. The usual whitespace, tabs vs. blanks problem ... (you know,... http://www.google-melange.com/gci/task/view/google/gci2012/7960222 |
| 17:46.46 | Notify | 03GCI: Daniel Rossberg: Investigate performance of setting thread affinity - Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once you re-submit your work. http://www.google-melange.com/gci/task/view/google/gci2012/7960222 |
| 17:46.47 | Notify | 03GCI: Melange: Implement a primitive centroid function ... for elliptical hyperboloids (EHY) - Task Reopened Melange has detected that the final deadline has passed and it has reopened the task. http://www.google-melange.com/gci/task/view/google/gci2012/7975237 |
| 17:46.48 | Notify | 03GCI: Skriptkid: Investigate performance of setting thread affinity - Didn't get the first part I didnt understand the first part. If i don't include pthread.h, it won't compile. http://www.google-melange.com/gci/task/view/google/gci2012/7960222 |
| 17:46.49 | Notify | 03GCI: Skriptkid: Investigate performance of setting thread affinity - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/7960222 |
| 17:46.50 | Notify | 03GCI: Skriptkid: Investigate performance of setting thread affinity - Small edit to note Now the function has been moved to parallel.c. they are not in worker.c or view.c. Just one function prototype in parallel.c http://www.google-melange.com/gci/task/view/google/gci2012/7960222 |
| 17:46.51 | Notify | 03GCI: Daniel Rossberg: Investigate performance of setting thread affinity - There are still some issues the line-indents are wrong (8 blanks => 1 tab) undo your change to semaphore.c: you only added 4 spaces remove the #define _GNU_SOURCE from parallel.c http://www.google-melange.com/gci/task/view/google/gci2012/7960222 |
| 17:46.52 | Notify | 03GCI: Daniel Rossberg: Investigate performance of setting thread affinity - Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once you re-submit your work. http://www.google-melange.com/gci/task/view/google/gci2012/7960222 |
| 17:46.53 | Notify | 03GCI: Skriptkid: Investigate performance of setting thread affinity - aaf_new aaf_new.tar.gz is the latest. The specified fixes have been done. Also, a small change to the note. The function prototype is in worker.c and view.c no more, but in parallel.c. It is only called in worker.c and view.c http://www.google-melange.com/gci/task/view/google/gci2012/7960222 |
| 17:46.54 | Notify | 03GCI: Skriptkid: Investigate performance of setting thread affinity - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/7960222 |
| 17:46.55 | Notify | 03GCI: Skriptkid: Investigate performance of setting thread affinity - Latest aaf_latest.tar.gz is the latest. **** DO NOT USE ANYTHING SUBMITTED BEFORE THAT. IGNORE ALL OTHER FILES **** Sorry for any confusion. http://www.google-melange.com/gci/task/view/google/gci2012/7960222 |
| 17:46.56 | Notify | 03GCI: Skriptkid: Investigate performance of setting thread affinity - #define _GNU_SOURCE Removed it, but I doubt it will compile without that statement. It doesn't on my computer. Shall I include it in the #ifdef HAVE_PTHREAD_H or #ifdef linux condition block? http://www.google-melange.com/gci/task/view/google/gci2012/7960222 |
| 17:46.57 | Notify | 03GCI: Andrei Tudorica: Compile BRL-CAD using Dev-C++ - ime I got no response to the rquest for contact data (IRC) so I'm afraid I will need more time to get this task done. http://www.google-melange.com/gci/task/view/google/gci2012/7945220 |
| 17:46.58 | Notify | 03GCI: Melange: Categorize all of BRL-CAD's commands into a spreadsheet - Initial Deadline passed Melange has detected that the initial deadline has passed and it has set the task status to ActionNeeded. The student has 24 hours to submit the work before the task is reopened and sent back to the pool for other students to claim. http://www.google-melange.com/gci/task/view/google/gci2012/7970237 |
| 17:46.59 | Notify | 03GCI: Ashish: Categorize all of BRL-CAD's commands into a spreadsheet - Sorry I am sooo sorry I cant complete the work :( Currrently busy with my school's upcoming fest I think ill join google code in after 12th only :( http://www.google-melange.com/gci/task/view/google/gci2012/7970237 |
| 17:47.00 | Notify | 03GCI: Ashish: Categorize all of BRL-CAD's commands into a spreadsheet - Claim Removed The claim on this task has been removed, someone else can claim it now. http://www.google-melange.com/gci/task/view/google/gci2012/7970237 |
| 17:47.04 | brlcad | eek |
| 17:47.28 | brlcad | maths22: hmm.. not sure, a lot have been added and there are a lot more to go |
| 17:47.49 | maths22 | brlcad: why do you not show on the list of users? |
| 17:48.20 | maths22 | I don't think I saw any, but I wanted to make sure I had not just been too slow to claim them. |
| 17:53.50 | Notify | 03BRL-CAD:carlmoore * 54034 brlcad/trunk/misc/CMake/CompilerFlags.cmake: remove trailing blanks/tabs |
| 18:10.14 | Notify | 03GCI: Sharan: Create the BRL-CAD Logo in BRL-CAD (#3) - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/7993222 |
| 18:13.25 | *** join/#brlcad Al_Da_Best (Al_Da_Best@cpc2-shep12-2-0-cust21.8-3.cable.virginmedia.com) | |
| 18:16.22 | Notify | 03GCI: Sharan: Create the BRL-CAD Logo in BRL-CAD (#3) - Completed in 15 hrs :-) I was new to this software. The Documentation files helped me alot. My previous experience in MAYA made it a lot easier. http://www.google-melange.com/gci/task/view/google/gci2012/7993222 |
| 18:19.40 | brlcad | new task: step-g regression test: http://www.google-melange.com/gci/task/view/google/gci2012/8048207 |
| 18:20.17 | maths22 | brlcad: why is your away status set? |
| 18:20.51 | maths22 | you appear to be online. :) |
| 18:22.27 | brlcad | because I just haven't bothered to unset it yet |
| 18:22.29 | brlcad | happens |
| 18:24.05 | maths22 | OK. Just wanted to make sure you were aware |
| 18:31.50 | brlcad | new task: nurbs regression test: http://www.google-melange.com/gci/task/view/google/gci2012/7989209 |
| 18:33.28 | brlcad | maths22: so you upgraded drupal and mediawiki and ... ? |
| 18:34.19 | maths22 | what is the and ... about? |
| 18:34.27 | brlcad | and anything else? |
| 18:35.09 | brlcad | notices the titles are misaligned on the drupal site.. hm |
| 18:37.26 | maths22 | Let me look. I thought I fixed that. |
| 18:37.31 | brlcad | maths22: there are lots of students, just wondering what other tasks you've completed :) |
| 18:37.40 | brlcad | reminder and what not ;) |
| 18:38.26 | maths22 | I have done the mysql task, the drupal task, the mediawiki task, and the gallery task. |
| 18:38.26 | maths22 | I am fixing the titles now. |
| 18:38.35 | brlcad | okay |
| 18:38.52 | brlcad | that should be enough to flip the switch on BRL-CAD's DNS |
| 18:39.17 | brlcad | maybe one final database and file sync |
| 18:41.28 | maths22 | I fixed the titles/ |
| 18:46.38 | brlcad | awesome! what was it? |
| 18:56.29 | *** join/#brlcad alezakos (~kongr45gp@unaffiliated/alezakos) | |
| 19:00.24 | brlcad | new task: 'brep' manual page: http://www.google-melange.com/gci/task/view/google/gci2012/8013221 |
| 19:11.16 | Notify | 03GCI: Melange: Compile BRL-CAD using Dev-C++ - Task Reopened Melange has detected that the final deadline has passed and it has reopened the task. http://www.google-melange.com/gci/task/view/google/gci2012/7945220 |
| 19:11.31 | Notify | 03GCI: Andrei Tudorica: Compile BRL-CAD using Dev-C++ - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/7945220 |
| 19:19.50 | Notify | 03GCI: Melange: Doxygen cleanup ... for LIBBN - No more Work can be submitted Melange has detected that the deadline has passed and no more work can be submitted. The submitted work should be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/8031203 |
| 19:22.11 | ``Erik | cl |
| 19:24.09 | brlcad | brep man page task number changed: http://www.google-melange.com/gci/task/view/google/gci2012/7948232 |
| 19:24.24 | brlcad | the other is now to update our vm: http://www.google-melange.com/gci/task/view/google/gci2012/8013221 |
| 19:33.06 | brlcad | new task: qemu deployment testing: http://www.google-melange.com/gci/task/view/google/gci2012/8023219 |
| 19:41.05 | *** join/#brlcad twitch (~javamonn@adsl-68-90-24-186.dsl.rcsntx.swbell.net) | |
| 19:49.14 | *** join/#brlcad andrei (andrei@188.25.27.142) | |
| 19:57.42 | *** join/#brlcad archivist (~archivist@host81-149-189-98.in-addr.btopenworld.com) | |
| 20:08.56 | ``Erik | O.o is the new task something that should come through the tracker mailing list? |
| 20:11.26 | brlcad | new task: design new web interface: http://www.google-melange.com/gci/task/view/google/gci2012/7958235 |
| 20:11.31 | brlcad | ``Erik: they don't yet post them |
| 20:11.37 | brlcad | i put in a request, so maybe |
| 20:20.51 | Notify | 03GCI: Melange: Compile BRL-CAD on Windows using Cygwin - Initial Deadline passed Melange has detected that the initial deadline has passed and it has set the task status to ActionNeeded. The student has 24 hours to submit the work before the task is reopened and sent back to the pool for other students to claim. http://www.google-melange.com/gci/task/view/google/gci2012/7972239 |
| 20:30.43 | maths22 | I forgot to include a class specifier in the css file. I added a left align but did not say what to apply it to. |
| 20:34.31 | Notify | 03GCI: Jacob B: Mock up new BRL-CAD website interface design - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/7958235 |
| 20:34.36 | Notify | 03GCI: Kristaps: Categorize all of BRL-CAD's commands into a spreadsheet - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/7987215 |
| 20:35.42 | Notify | 03GCI: Jacob B: Mock up new BRL-CAD website interface design - Mockup Would I be able to duplicate the site and make this as a drupal theme from the start? http://www.google-melange.com/gci/task/view/google/gci2012/7958235 |
| 20:41.14 | Notify | 03GCI: Brandon Gonzalez: Write a BRL-CAD to RAW converter - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/7945223 |
| 20:42.59 | brlcad | new task: model an ellipsoid: http://www.google-melange.com/gci/task/view/google/gci2012/7959254 |
| 20:43.23 | brlcad | maths22: did our existing css not translate? |
| 20:43.35 | brlcad | or did they add new divs/spans that had to be associated? |
| 20:45.15 | maths22 | it did, but the structure changed so I had to rework the css to be compatible |
| 20:48.11 | brlcad | new task: model a fresnel lens: http://www.google-melange.com/gci/task/view/google/gci2012/8049208 |
| 21:05.01 | Notify | 03GCI: Brandon Gonzalez: Write a BRL-CAD to RAW converter - Claim Removed The claim on this task has been removed, someone else can claim it now. http://www.google-melange.com/gci/task/view/google/gci2012/7945223 |
| 21:44.26 | Notify | 03GCI: Melange: Create a utility library (LIBBU) API unit test ... for hash.c - Initial Deadline passed Melange has detected that the initial deadline has passed and it has set the task status to ActionNeeded. The student has 24 hours to submit the work before the task is reopened and sent back to the pool for other students to claim. http://www.google-melange.com/gci/task/view/google/gci2012/8031205 |
| 21:48.26 | starseeker | brlcad: dunno if it's a 2 hour type task, but someone could hunt down why tire is adding a duplicate subtraction to one of the csg hierarchies (I think it showed up that one time you did a graphviz visualization...) |
| 21:50.29 | Notify | 03BRL-CAD:bob1961 * 54035 brlcad/trunk/src/tclscripts/archer/SketchEditFrame.tcl: More updates for Archer's sketch editor. This adds functionality to delete points and segments. |
| 22:03.49 | brlcad | new task: model an hourglass: http://www.google-melange.com/gci/task/view/google/gci2012/8017215 |
| 22:04.18 | brlcad | starseeker: it'd probably take longer to explain it, but I'll add it if you write something up |
| 22:34.58 | Notify | 03GCI: BrendenD15: Compile BRL-CAD on Windows using Cygwin - Still not working I've tried "make" again and I still don't get anything. I'll send in what I have so that it can get looked over. The log for the makeflie build is near the very end of the document. http://www.google-melange.com/gci/task/view/google/gci2012/7972239 |
| 22:37.30 | Notify | 03GCI: BrendenD15: Compile BRL-CAD on Windows using Cygwin - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/7972239 |
| 22:48.55 | brlcad | new task: model caffeine: http://www.google-melange.com/gci/task/view/google/gci2012/7998227 |
| 22:58.27 | brlcad | new task: model a diamond: http://www.google-melange.com/gci/task/view/google/gci2012/8034208 |
| 23:06.30 | *** join/#brlcad alezakosz (~kongr45gp@helit.org) | |
| 23:10.03 | brlcad | new task: model a gear: http://www.google-melange.com/gci/task/view/google/gci2012/8050205 |
| 23:16.42 | brlcad | new task: opengl gears: http://www.google-melange.com/gci/task/view/google/gci2012/8012227 |
| 23:23.17 | *** join/#brlcad rptynan (~poiuyt@92.251.255.5.threembb.ie) | |
| 23:34.04 | Notify | 03GCI: Matt S.: Implement a primitive volume function ... for hyperboloids of one sheet (HYP) - It does indeed seem to be a duplicate Also, for what it's worth, I've sketched up a possible solution strategy here: http://brlcad.org/wiki/Image:Volume_computation.pdf I'm not sure it's correct though--it was done in a rush and I have not worked... http://www.google-melange.com/gci/task/view/google/gci2012/7987216 |