| 00:02.50 | brlcad | maths22: that's not meant to be frustrating or discouraging, just trying to understand where you're at in your development |
| 00:05.23 | brlcad | you're definitely tackling one of the hardest tasks in our list skillwise :) |
| 00:09.45 | Notify | 03GCI: Jjca: Find and Fix 10 spelling mistakes in at least 10 different files (#2) - All documentation? I've to check all the documentation? http://www.google-melange.com/gci/task/view/google/gci2012/8103205 |
| 00:30.41 | *** join/#brlcad stevegt_ (~stevegt@cislunar.TerraLuna.Org) | |
| 00:52.58 | Notify | 03GCI: javamonn: cmake case cleanup - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/7985244 |
| 00:55.23 | Notify | 03GCI: javamonn: cmake case cleanup - A couple notes: I converted everything that I could to lower case. Arguements in cmake are case sensitive so I left them alone. All commands and macros, both user defined and system were changed to lower case. Everything compiles fine on my end. Let me know if anything should be changed. Thanks, Daniel http://www.google-melange.com/gci/task/view/google/gci2012/7985244 |
| 01:01.12 | *** join/#brlcad milamber (~devlin@d118-75-244-176.try.wideopenwest.com) | |
| 01:19.29 | *** join/#brlcad stevenkou (~stevenkou@175.156.156.148) | |
| 01:24.11 | Notify | 03GCI: BrendenD15: Write a "BRL-CAD Commands Quick Reference" document - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/7991205 |
| 01:25.13 | maths22 | I have never used git before. |
| 01:25.20 | maths22 | I have used subversion some. |
| 01:25.32 | maths22 | Learning LISP was fun :) |
| 01:25.51 | Notify | 03GCI: Melange: Write a "BRL-CAD Commands Quick Reference" document - No more Work can be submitted Melange has detected that the deadline has passed and no more work can be submitted. The submitted work should be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/7991205 |
| 01:27.57 | ``Erik | it stopped being LISP in the 80's :D but it is an awesome language... |
| 01:28.42 | Notify | 03GCI: BrendenD15: Write a "BRL-CAD Commands Quick Reference" document - My work so far This is what I've got so far. Since these commands are the minimal requirements, I thought I would add how to start MGED in console mode as well as close it. Once I figure out the other commands, I will add them to the list. Finally after I have all of the... http://www.google-melange.com/gci/task/view/google/gci2012/7991205 |
| 01:28.54 | ``Erik | "Lisp is worth learning for the profound enlightenment experience you will have when you finally get it; that experience will make you a better programmer for the rest of your days, even if you never actually use Lisp itself a lot." -esr |
| 01:29.32 | ``Erik | http://xkcd.com/224/ http://xkcd.com/297/ |
| 01:30.09 | Notify | 03GCI: BrendenD15: Write a "BRL-CAD Commands Quick Reference" document - Final format The final version can be in PDF format if you would prefer that. http://www.google-melange.com/gci/task/view/google/gci2012/7991205 |
| 01:30.54 | Notify | 03GCI: Steven Kou: Compile BRL-CAD on Windows using Cygwin (attempt #2) - Update I have uploaded my latest findings, hope that the mentors can take a look. I am quite busy these few days so I may not be able to finish the task on time, is it possible to have an extension? If it is not possible then perhaps I will try my luck to claim the... http://www.google-melange.com/gci/task/view/google/gci2012/7961226 |
| 01:40.24 | ``Erik | http://www.tcl.tk/software/tcltk/8.6.html tcl86 is out |
| 01:41.11 | ``Erik | looks like tkpng can go away |
| 02:00.11 | Notify | 03GCI: Sharan: Create an Extrusion Model and Diagram - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/8059204 |
| 02:00.22 | Notify | 03GCI: Richard Akira Heru: Create a Hyperbolic Cylinder Model and Diagram - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/8063202 |
| 02:11.36 | stevenkou | I don't quite understand the last error while building brlcad, it says something about all, can anyone explain? |
| 02:13.22 | ``Erik | stevenkou: can you paste it on a pastebin somewhere, like http://paste.lisp.org ? |
| 02:19.50 | Notify | 03GCI: Ying Liu: Improve geometry database loading behavior - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/7945230 |
| 02:28.34 | Notify | 03GCI: Sean: Improve geometry database loading behavior - Task Assigned This task has been assigned to Ying Liu. You have 72 hours to complete this task, good luck! http://www.google-melange.com/gci/task/view/google/gci2012/7945230 |
| 02:35.42 | Notify | 03GCI: Sean: Review and post "Blender to BRL-CAD" tutorial on our wiki - check the steps Note that the commands shown to rotate the model were a rough guess -- they should be verified. You might want to make one leg shorter when testing just to make sure the table is oriented correctly. The last image should be the table rendered and looking... http://www.google-melange.com/gci/task/view/google/gci2012/8079211 |
| 02:36.02 | Notify | 03GCI: Sean: Find and Fix 10 spelling mistakes in at least 10 different files (#2) - Task Assigned This task has been assigned to Jjca. You have 72 hours to complete this task, good luck! http://www.google-melange.com/gci/task/view/google/gci2012/8103205 |
| 02:37.02 | stevenkou | ``Erik: my log is present on my task page at http://www.google-melange.com/gci/task/view/google/gci2012/7961226 , if you do require me to post it on pastebin, i can do so |
| 02:37.44 | Notify | 03GCI: Sean: Find and Fix 10 spelling mistakes in at least 10 different files (#2) - Anywhere You can check any and all files that belong to us. That means ignore EVERYTHING in src/other, some of the files the misc/ subdirectory, and a few others spread throughout our tree. http://www.google-melange.com/gci/task/view/google/gci2012/8103205 |
| 02:40.09 | Notify | 03GCI: Sean: Fix CMake build system auto-disabling of GLEW - Task Closed Congratulations, this task has been completed successfully. http://www.google-melange.com/gci/task/view/google/gci2012/7999218 |
| 02:40.17 | brlcad | caen23: name was a little ambiguous, but that looked better/good enough |
| 02:40.44 | Notify | 03GCI: Melange: Implement a primitive centroid function ... for elliptical hyperboloids (EHY) - Task Reopened Melange has detected that the final deadline has passed and it has reopened the task. http://www.google-melange.com/gci/task/view/google/gci2012/7975237 |
| 02:41.34 | caen23 | what name? :D of the patch? |
| 02:44.11 | Notify | 03GCI: Sean: Implement a primitive centroid function ... for elliptical hyperboloids (EHY) - reclaim it Aaron, you're encouraged to reclaim the task so we can mark you as having completing it. Even a picture of a piece of paper where you worked out the math would be good. It would be great to include the derivation in the source code... http://www.google-melange.com/gci/task/view/google/gci2012/7975237 |
| 02:44.12 | Notify | 03GCI: bill_cooperman: Create a utility library (LIBBU) API unit test ... for malloc.c - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/7953237 |
| 02:44.42 | Notify | 03GCI: Sean: Create a utility library (LIBBU) API unit test ... for malloc.c - Task Assigned This task has been assigned to bill_cooperman. You have 48 hours to complete this task, good luck! http://www.google-melange.com/gci/task/view/google/gci2012/7953237 |
| 02:44.48 | brlcad | caen23: the variable name |
| 02:46.57 | Notify | 03GCI: Sean: Write a "BRL-CAD Commands Quick Reference" document - Deadline extended The deadline of the task has been extended with 2 days and 0 hours. http://www.google-melange.com/gci/task/view/google/gci2012/7991205 |
| 02:47.02 | Notify | 03GCI: Sean: Write a "BRL-CAD Commands Quick Reference" document - Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once you re-submit your work. http://www.google-melange.com/gci/task/view/google/gci2012/7991205 |
| 02:58.02 | Notify | 03GCI: Jjca: Find and Fix 10 spelling mistakes in at least 10 different files (#2) - Do I Have to register? If is yes, I can't... The error "<minnamelength-error>" always appears. http://www.google-melange.com/gci/task/view/google/gci2012/8103205 |
| 03:00.26 | *** join/#brlcad crdueck (~cdk@24-212-219-10.cable.teksavvy.com) | |
| 03:06.32 | stevenkou | brlcad: thanks for your help for my patch, you guided me to learn and not just give me the answer straight. by the way, I have updated the log for my task and I would like to know what possible ways do I have to resolve the error? |
| 03:15.56 | Notify | 03BRL-CAD Wiki:201.248.31.6 * 4795 /wiki/Overview: |
| 03:20.48 | Notify | 03GCI: Jjca: Find and Fix 10 spelling mistakes in at least 10 different files (#2) - I'm sorry I really want to help but I can't, maybe the next year... I don't want to make more mistakes in the documentation so, I unclaim this task. Because, my English isn't good a lot. Maybe I've mistakes here and I don't know... http://www.google-melange.com/gci/task/view/google/gci2012/8103205 |
| 03:20.53 | Notify | 03GCI: Jjca: Find and Fix 10 spelling mistakes in at least 10 different files (#2) - Claim Removed The claim on this task has been removed, someone else can claim it now. http://www.google-melange.com/gci/task/view/google/gci2012/8103205 |
| 03:21.47 | *** join/#brlcad milamber (~devlin@d118-75-244-176.try.wideopenwest.com) | |
| 03:23.14 | Notify | 03GCI: Sean: Write a "BRL-CAD Commands Quick Reference" document - more work needed Don't worry about the mged commands (quit, etc) nor referencing the cheet sheet. That isn't useful to repeat here and there's so much more we hope to explain. You have a BIG uphill battle because you're (understandably) not familiar with BRL-CAD and it sounds... http://www.google-melange.com/gci/task/view/google/gci2012/7991205 |
| 03:25.15 | Notify | 03BRL-CAD Wiki:Sean * 4796 /wiki/Overview: |
| 03:51.23 | *** part/#brlcad stevenkou (~stevenkou@175.156.156.148) | |
| 04:27.48 | Notify | 03GCI: Sean: Create a Hyperbolic Cylinder Model and Diagram - Task Closed Congratulations, this task has been completed successfully. http://www.google-melange.com/gci/task/view/google/gci2012/8063202 |
| 04:38.02 | Notify | 03GCI: Gmercer015: Create a numerics library (LIBBN) API unit test ... for poly.c - Very close to finishing task I almost have the task completed, i just need another days time however to completely finish. Only things left are to impliment one more function test and changing around some calls, thank you very much if you can extend the time. http://www.google-melange.com/gci/task/view/google/gci2012/7984226 |
| 04:45.45 | Notify | 03GCI: Sean: Create an Extrusion Model and Diagram - Task Closed Congratulations, this task has been completed successfully. http://www.google-melange.com/gci/task/view/google/gci2012/8059204 |
| 04:45.50 | Notify | 03GCI: Melange: cmake case cleanup - No more Work can be submitted Melange has detected that the deadline has passed and no more work can be submitted. The submitted work should be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/7985244 |
| 04:56.46 | Notify | 03GCI: Aaron Keesing: Implement a primitive centroid function ... for elliptical hyperboloids (EHY) - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/7975237 |
| 05:00.27 | Notify | 03GCI: Sean: Find and Fix 10 spelling mistakes in at least 10 different files (#2) - don't have to register Hi Jjca, we're also here to help you learn, so there's no need to worry. I think you misunderstood the task just a little bit because you don't need to register on our website. This task involved fixing spelling mistakes in our project... http://www.google-melange.com/gci/task/view/google/gci2012/8103205 |
| 05:00.52 | Notify | 03GCI: Sean: Implement a primitive centroid function ... for elliptical hyperboloids (EHY) - Task Assigned This task has been assigned to Aaron Keesing. You have 72 hours to complete this task, good luck! http://www.google-melange.com/gci/task/view/google/gci2012/7975237 |
| 05:02.28 | Notify | 03GCI: Sean: Design an MGED command spreadsheet - once compiled Once you compile successfully, you'll be able to run that bin/mged line which will help to itemize all of mged's available commands. http://www.google-melange.com/gci/task/view/google/gci2012/7985228 |
| 05:04.04 | Notify | 03GCI: Sean: Append CMake build flags to the end of a compile line - more time Let us know if you need more time. This one may be a little tricky as you'll probably have to edit other files and/or put commands into a macro. http://www.google-melange.com/gci/task/view/google/gci2012/8106206 |
| 05:09.01 | Notify | 03GCI: Sean: Identify 10 places to post an open source solicitation - hank you Thank you for working on the task. Hopefully, you'll try to work on other tasks as well. Note that some tasks are easier than others, so check over our list and ask questions if anything is confusing. http://www.google-melange.com/gci/task/view/google/gci2012/8104204 |
| 05:11.57 | Notify | 03GCI: Sean: Reproduce any 10 unconfirmed open bug reports - 6/10 Wow, you were on a roll it seemed. What happened? How long did it take you to confirm those 6 reports? http://www.google-melange.com/gci/task/view/google/gci2012/7971223 |
| 05:19.15 | *** join/#brlcad stevegt_ (~stevegt@c-69-181-134-76.hsd1.ca.comcast.net) | |
| 05:39.08 | Notify | 03GCI: Sean: cmake case cleanup - impressive Hi Daniel, Impressive! How'd you convert everything so quickly? How long did it take? It'll take a lil bit to verify a few things but it looks good on a quick read through. http://www.google-melange.com/gci/task/view/google/gci2012/7985244 |
| 05:44.23 | *** join/#brlcad stevegt_ (~stevegt@c-69-181-134-76.hsd1.ca.comcast.net) | |
| 05:46.41 | Notify | 03GCI: Sean: Create a numerics library (LIBBN) API unit test ... for poly.c - Deadline extended The deadline of the task has been extended with 1 days and 0 hours. http://www.google-melange.com/gci/task/view/google/gci2012/7984226 |
| 05:48.02 | Notify | 03GCI: Sean: Compile BRL-CAD on Windows using Cygwin (attempt #2) - Deadline extended The deadline of the task has been extended with 2 days and 0 hours. http://www.google-melange.com/gci/task/view/google/gci2012/7961226 |
| 05:52.54 | Notify | 03GCI: gcking: Append CMake build flags to the end of a compile line - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/8106206 |
| 05:56.55 | Notify | 03GCI: gcking: Append CMake build flags to the end of a compile line - est under both debug and release mode I tested the script under both debug and release mode, but I did not find out the error you mentioned below. I attached the result log file including both debug and release mode, please review it. http://www.google-melange.com/gci/task/view/google/gci2012/8106206 |
| 06:12.17 | Notify | 03GCI: Richard Akira Heru: Add a primitive surface area function ... for right hyperbolic cylinders (RHC) - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/7982218 |
| 06:53.07 | Notify | 03GCI: Sean: cmake case cleanup - found a problem I've found several problems in all the instances of ResolveCompilerPaths.cmake and FindTCL.cmake where an internal option was changed in case and is incorrect. You should re-review the changes (yeah, all lines.. somewhat tedious) to make sure all are intentional, particularly the lines with... http://www.google-melange.com/gci/task/view/google/gci2012/7985244 |
| 06:53.12 | Notify | 03GCI: Sean: cmake case cleanup - Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once you re-submit your work. http://www.google-melange.com/gci/task/view/google/gci2012/7985244 |
| 06:53.22 | Notify | 03GCI: Sean: cmake case cleanup - Deadline extended The deadline of the task has been extended with 2 days and 0 hours. http://www.google-melange.com/gci/task/view/google/gci2012/7985244 |
| 06:56.19 | Notify | 03GCI: Sean: Add a primitive surface area function ... for right hyperbolic cylinders (RHC) - Task Assigned This task has been assigned to Richard Akira Heru. You have 72 hours to complete this task, good luck! http://www.google-melange.com/gci/task/view/google/gci2012/7982218 |
| 07:14.18 | *** join/#brlcad justinjuncl (7c376cb2@gateway/web/freenode/ip.124.55.108.178) | |
| 07:39.16 | *** join/#brlcad YatharthROCK (~YatharthR@95.175.92.238) | |
| 07:41.49 | Notify | 03GCI: Deep Inder Singh: Document MGED's 'saveview' command options - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/7998205 |
| 07:43.14 | *** join/#brlcad caen23_ (~caen23@92.81.172.242) | |
| 07:50.38 | Notify | 03GCI: Daniel Rossberg: Document MGED's 'saveview' command options - Task Assigned This task has been assigned to Deep Inder Singh. You have 48 hours to complete this task, good luck! http://www.google-melange.com/gci/task/view/google/gci2012/7998205 |
| 07:54.53 | YatharthROCK | brlcad, The making of the DocBook man page is screwing up. It switched bold and italics seemingly randomly and doesn't use RS and Re for blockquotes even after adding the remap attribute. What's happening? |
| 07:56.11 | YatharthROCK | Not just for my file, but others to. BTW this only happens when I use man to inspect the files in the share/man/man1 folder. |
| 08:14.19 | YatharthROCK | brlcad, If I upload the patch file to SourceForge, what do I submit for the task? |
| 08:17.48 | *** join/#brlcad d_rossberg (~rossberg@BZ.BZFLAG.BZ) | |
| 08:19.19 | Notify | 03GCI: Yatharth Agarwal: Add missing documentation for any one command (#2) - What do I submit? I've created the diff/patch file. The wiki says to upload it to SourceForge, but the task description says to just upload it over here. Should I just upload to SourceForge and submit the URL to the patch here? Also, I completely agree with you on... http://www.google-melange.com/gci/task/view/google/gci2012/8126204 |
| 08:29.13 | Notify | 03GCI: Yatharth Agarwal: Add missing documentation for any one command (#2) - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/8126204 |
| 08:29.43 | Notify | 03GCI: Daniel Rossberg: Add missing documentation for any one command (#2) - Upload it here ... http://www.google-melange.com/gci/task/view/google/gci2012/8126204 |
| 08:38.00 | *** join/#brlcad milamber (~devlin@d118-75-244-176.try.wideopenwest.com) | |
| 08:38.35 | Notify | 03GCI: Yatharth Agarwal: Add missing documentation for any one command (#2) - Summary Here are the things I did:- added a asc2g.xml DocBook file in the brlcad/doc/docbook/system/man1/en/ folder modified CMakeLists.txt (which in the task description was mistakingly mentioned as CMakeFiles.txt) to compile asc2g.xml when making and to comment... http://www.google-melange.com/gci/task/view/google/gci2012/8126204 |
| 08:46.12 | *** join/#brlcad YatharthROCK (~YatharthR@95.175.92.238) | |
| 08:46.59 | Notify | 03GCI: Daniel Rossberg: Add missing documentation for any one command (#2) - Ok, about the patch-v1 Simply remove the set_source_files_properties() line. Keeping senseless code in a filemakes it hard to read. The version control system (Subversion for BRL-CAD) will keep track of it. It looks like you need to make changes to the g2asc.xml too... http://www.google-melange.com/gci/task/view/google/gci2012/8126204 |
| 08:47.04 | Notify | 03GCI: Daniel Rossberg: Add missing documentation for any one command (#2) - Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once you re-submit your work. http://www.google-melange.com/gci/task/view/google/gci2012/8126204 |
| 08:52.26 | Notify | 03GCI: Yatharth Agarwal: Add missing documentation for any one command (#2) - Modify g2asc.xml? So I modify the g2asc man page to make it only for that command? http://www.google-melange.com/gci/task/view/google/gci2012/8126204 |
| 08:56.02 | Notify | 03GCI: Daniel Rossberg: Add missing documentation for any one command (#2) - Yes It was the man page for two commands (asc2g and g2asc). Now asc2g gets its own man page. http://www.google-melange.com/gci/task/view/google/gci2012/8126204 |
| 09:00.15 | Notify | 03GCI: Sharan: Create an Halfspace Model and Diagram - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/8043208 |
| 09:08.23 | *** join/#brlcad devlin (~devlin@d118-75-244-176.try.wideopenwest.com) | |
| 09:15.52 | Notify | 03GCI: Daniel Rossberg: Create an Halfspace Model and Diagram - Task Assigned This task has been assigned to Sharan. You have 48 hours to complete this task, good luck! http://www.google-melange.com/gci/task/view/google/gci2012/8043208 |
| 09:28.43 | Notify | 03GCI: Yatharth Agarwal: Add missing documentation for any one command (#2) - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/8126204 |
| 09:30.38 | Notify | 03GCI: Yatharth Agarwal: Add missing documentation for any one command (#2) - Deadline Extension requested If the task gets rejected now, can I have a deadline extension of 1 day or so, please? http://www.google-melange.com/gci/task/view/google/gci2012/8126204 |
| 09:35.06 | Notify | 03GCI: Melange: Categorize all of BRL-CAD's commands into a spreadsheet - Task Reopened Melange has detected that the final deadline has passed and it has reopened the task. http://www.google-melange.com/gci/task/view/google/gci2012/7970237 |
| 09:55.10 | Notify | 03GCI: Daniel Rossberg: Add missing documentation for any one command (#2) - Deadline extended The deadline of the task has been extended with 1 days and 0 hours. http://www.google-melange.com/gci/task/view/google/gci2012/8126204 |
| 10:21.51 | Notify | 03GCI: Sharan: Create an Halfspace Model and Diagram - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/8043208 |
| 10:24.50 | *** join/#brlcad YatharthROCK (~YatharthR@37.39.27.137) | |
| 10:25.46 | *** join/#brlcad YatharthROCK (~YatharthR@37.39.27.137) | |
| 10:31.00 | Notify | 03GCI: Yatharth Agarwal: Add missing documentation for any one command (#2) - Can you review it? patch-v2 includes the new, updated g2asc.xml file. Can you please review it? Also, the deadline extension wasn't necessary. I managed to convince my mom to let me take my laptop :) http://www.google-melange.com/gci/task/view/google/gci2012/8126204 |
| 11:23.00 | *** join/#brlcad YatharthROCK (~YatharthR@178.161.100.247) | |
| 11:23.22 | YatharthROCK | d_rossberg, Could you please review my task? |
| 11:23.42 | YatharthROCK | brlcad, How it it that you're always online? |
| 11:35.14 | Notify | 03GCI: Cezar: Enable our fbthreadtest tool for compilation - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/7994227 |
| 11:36.17 | *** join/#brlcad YatharthROCK (~YatharthR@178.161.100.247) | |
| 11:39.25 | Notify | 03GCI: Daniel Rossberg: Enable our fbthreadtest tool for compilation - Task Assigned This task has been assigned to Cezar. You have 48 hours to complete this task, good luck! http://www.google-melange.com/gci/task/view/google/gci2012/7994227 |
| 11:40.50 | d_rossberg | YatharthROCK: patience, we've some real work to do too |
| 11:41.23 | d_rossberg | i'm not a full-time brl-cad developer |
| 11:41.36 | YatharthROCK | d_rossberg, k, no prob. |
| 11:42.29 | YatharthROCK | d_rossberg, Ohh... then you're like a volunteer? Or part-time dev? |
| 11:43.22 | Notify | 03GCI: AGENT UM: Review and post "Blender to BRL-CAD" tutorial on our wiki - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/8079211 |
| 11:43.30 | d_rossberg | volunteer |
| 11:44.14 | YatharthROCK | d_rossberg, Cool :) Any other projects you work on? What do you do as a job? And where doyou live? |
| 11:44.49 | YatharthROCK | Sorry if I'm like, disturbing you or somethin', I'm just bored right now |
| 11:45.28 | d_rossberg | you'll find some answers in the AUTHORS file |
| 11:50.06 | Notify | 03GCI: Cezar: Enable our fbthreadtest tool for compilation - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/7994227 |
| 11:51.03 | Notify | 03BRL-CAD:caen23 * 54106 brlcad/trunk/src/fb/CMakeLists.txt: Enable fbthreadtest for compilation (GCI: http://www.google-melange.com/gci/task/view/google/gci2012/7994227) |
| 11:51.19 | YatharthROCK | d_rossberg, Why is your name written as Roßberg? |
| 11:52.52 | d_rossberg | ? why not? |
| 11:53.39 | ``Erik | not all terminal encodings support ß ? |
| 11:55.10 | d_rossberg | ah, in gci: because it's an US (Google) program |
| 11:55.27 | YatharthROCK | d_rossberg, Is that some letter for S? I |
| 11:56.08 | YatharthROCK | ``Erik, Unicode solves a lot of problems and UTF-8 is pretty much everywhere nowadays |
| 11:56.19 | d_rossberg | it's a ligature for "sz" |
| 11:56.45 | ``Erik | still has systems without utf8... :D |
| 11:57.42 | d_rossberg | e.g. my terinal here |
| 11:59.02 | YatharthROCK | d_rossberg, The line about Erik's terminal was highlighted and there was a start where th nicks normally are. What did you do? |
| 11:59.56 | d_rossberg | typed the ß letter and removed it with backspaces |
| 12:00.16 | YatharthROCK | d_rossberg, Your terminal doesn't support UTF-8? So you're accessing IRC via a terminal? |
| 12:00.35 | YatharthROCK | d_rossberg, I didn't get it |
| 12:00.49 | YatharthROCK | Why did it appear like that |
| 12:02.01 | YatharthROCK | d_rossberg, BTW, can I work on the other documentation task? Pleease? |
| 12:02.20 | d_rossberg | i'm using irssi |
| 12:05.22 | Notify | 03GCI: Aaron Keesing: Implement a primitive centroid function ... for elliptical hyperboloids (EHY) - Centroid Derivation Here is the link to a document which hopefully explains how I derived the formula. https://docs.google.com/open?id=0BydeQ6BPlVejRWt6NlJLVDl0d28 Sean, I'm not sure how I would include such a lengthy derivation in comments... http://www.google-melange.com/gci/task/view/google/gci2012/7975237 |
| 12:05.42 | Notify | 03GCI: Aaron Keesing: Implement a primitive centroid function ... for elliptical hyperboloids (EHY) - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/7975237 |
| 12:26.51 | Notify | 03GCI: Daniel Rossberg: Add missing documentation for any one command (#2) - The USAGE section refers to g2asc (in asc2g man-page). http://www.google-melange.com/gci/task/view/google/gci2012/8126204 |
| 12:27.01 | Notify | 03GCI: Daniel Rossberg: Add missing documentation for any one command (#2) - Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once you re-submit your work. http://www.google-melange.com/gci/task/view/google/gci2012/8126204 |
| 12:29.31 | YatharthROCK | d_rossberg, About your comment, I gave the full example to show an example of the workflow. We already know how to use it form the Synopsis and why to use it from the Description, I was giving sample situations for the command to be used as is recommended in the Usage section of manuals. |
| 12:31.57 | *** join/#brlcad justinjuncl (7c376cb2@gateway/web/freenode/ip.124.55.108.178) | |
| 12:32.47 | YatharthROCK | d_rossberg, What do you propose I change it to? |
| 12:33.36 | d_rossberg | YatharthROCK: what's the difference between an USAGE and an EXAMPLE section? |
| 12:36.47 | YatharthROCK | d_rossberg, There is an example section? |
| 12:37.07 | YatharthROCK | OK, I'll find out about it and get back to you with another patch |
| 12:39.56 | d_rossberg | there are many man-pages in share/doc/html/man1/en with an EXAMPLE section but only two with USAGE: asc2g and g2asc |
| 12:44.53 | Notify | 03GCI: dmusan: Crash our raytracer application reliably - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/8018211 |
| 12:50.06 | Notify | 03GCI: Daniel Rossberg: Review and post "Blender to BRL-CAD" tutorial on our wiki - Task Assigned This task has been assigned to AGENT UM. You have 72 hours to complete this task, good luck! http://www.google-melange.com/gci/task/view/google/gci2012/8079211 |
| 12:50.21 | Notify | 03GCI: Daniel Rossberg: Crash our raytracer application reliably - Task Assigned This task has been assigned to dmusan. You have 48 hours to complete this task, good luck! http://www.google-melange.com/gci/task/view/google/gci2012/8018211 |
| 12:50.33 | YatharthROCK | d_rossberg, Umm... so should I just rename USAGE to EXAMPLE? |
| 12:51.07 | *** join/#brlcad Skriptkid (~Skriptkid@117.202.106.44) | |
| 12:52.31 | Skriptkid | Could anyone please review my task? I had submitted yesterday and deadline's almost up. http://www.google-melange.com/gci/task/view/google/gci2012/8070202 |
| 12:52.54 | d_rossberg | i'm not an exper for manual pages but i was a little bit surprised to find g2asc in the _USAGE_ section og asc2g |
| 12:56.02 | YatharthROCK | d_rossberg, I dunno. I looked into some man pages that came with my system and they all had workflows under that section. mged is one example. |
| 12:56.24 | YatharthROCK | So after renaming that, will my task be accepted... |
| 12:56.31 | YatharthROCK | ? |
| 12:57.19 | d_rossberg | mged has an EXAMPLES section, hasn't it? |
| 13:00.27 | YatharthROCK | d_rossberg, Yeah, and it has examples of workflow inside that? |
| 13:05.07 | d_rossberg | do you know any other man-page with an USAGE section? |
| 13:05.25 | d_rossberg | g2asc was example too |
| 13:07.18 | Notify | 03BRL-CAD:bob1961 * 54107 brlcad/trunk/src/tclscripts/archer/SketchEditFrame.tcl: Collapsed the "Move Arbitrary", "Move Selected", "Select Points" and "Select Segments" modes into a single "Move" mode. |
| 13:09.27 | YatharthROCK | d_rossberg, I agree with you that USAGE should've been EXAMPLES for the sake of consistency. I've submitted an updated patch. Is there anything else? |
| 13:09.59 | Notify | 03GCI: Yatharth Agarwal: Add missing documentation for any one command (#2) - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/8126204 |
| 13:10.20 | YatharthROCK | I didn't change the content in that section, though. Should I have? |
| 13:14.05 | d_rossberg | shouldn't be the xml:id example too? |
| 13:20.36 | YatharthROCK | d_rossberg, ... |
| 13:20.45 | Notify | 03GCI: Daniel Rossberg: Add missing documentation for any one command (#2) - You forgot to change the xml:id too <refsect1 xml:id= ... http://www.google-melange.com/gci/task/view/google/gci2012/8126204 |
| 13:20.50 | Notify | 03GCI: Daniel Rossberg: Add missing documentation for any one command (#2) - Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once you re-submit your work. http://www.google-melange.com/gci/task/view/google/gci2012/8126204 |
| 13:22.32 | Notify | 03BRL-CAD:bob1961 * 54108 brlcad/trunk/src/tclscripts/archer/SketchEditFrame.tcl: Move the cursor configure commands from SketchEditFrame::initEditState to their respective mode setting methods. |
| 13:24.02 | Notify | 03GCI: Yatharth Agarwal: Add missing documentation for any one command (#2) - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/8126204 |
| 13:26.22 | YatharthROCK | d_rossberg, You must be getting really annoyed by now... |
| 13:28.32 | d_rossberg | YatharthROCK: it's nothing special, that's the usual process ;) |
| 13:29.11 | YatharthROCK | d_rossberg, Good to know. I hope my task *finally* gets accepted |
| 13:31.03 | maths22 | to 20:20 |
| 13:33.01 | *** join/#brlcad andrei (~andrei@86.123.127.50) | |
| 13:36.19 | *** join/#brlcad Al_Da_Best (Al_Da_Best@5e0e48c8.bb.sky.com) | |
| 13:37.35 | Notify | 03GCI: dmusan: Crash our raytracer application reliably - Raytrace Failed Raytrace fails on three tested computers running Ubuntu, Windows 7 or Mac OS X. BRL-CAD Release 7.22.0 The BRL-CAD Raytracer RT Thu, 05 Jul 2012 07:32:12 Eastern Daylight Time, Compilation 0 robert.g.parker@ARLANBNB15095:C:/Program Files (x86)/BRL-CAD 7.22.0 ... http://www.google-melange.com/gci/task/view/google/gci2012/8018211 |
| 13:38.56 | maths22 | lastlog 20:20 |
| 13:39.53 | maths22 | .loto end |
| 13:40.10 | maths22 | sorry about these weird posts |
| 13:42.13 | YatharthROCK | d_rossberg, I have like 15 minutes and then I can't come online. Could you please tell whther my task will be accepted or not? |
| 13:45.58 | andrei | YatharthROCK, what do you mean? |
| 13:46.06 | andrei | you mean claimRequest? |
| 14:07.49 | Notify | 03GCI: Daniel Rossberg: Add missing documentation for any one command (#2) - Example vs. Examples You called the section exaples (plural). But comparin it with the other man-pages and the g2asc as it was before I'm fairly sure that it should be example (singular). http://www.google-melange.com/gci/task/view/google/gci2012/8126204 |
| 14:07.54 | Notify | 03GCI: Daniel Rossberg: Add missing documentation for any one command (#2) - Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once you re-submit your work. http://www.google-melange.com/gci/task/view/google/gci2012/8126204 |
| 14:24.47 | *** join/#brlcad Skriptkid (~Skriptkid@117.202.106.44) | |
| 14:27.34 | Notify | 03GCI: Deep Inder Singh: Document MGED's 'saveview' command options - Claim Removed The claim on this task has been removed, someone else can claim it now. http://www.google-melange.com/gci/task/view/google/gci2012/7998205 |
| 14:28.21 | maths22 | ``Erik: On my current computer (not yesterday's) split-mail-to-head-and-body returns nil |
| 14:37.35 | *** join/#brlcad YatharthROCK (~YatharthR@95.175.83.246) | |
| 14:53.15 | ``Erik | maths22: I'd think the only two ways that could happen are if the file wasn't readable or if it couldn't find an empty line (could be due to line ending issues if windows or a really old mac were somehow involved) |
| 14:55.07 | ``Erik | you could put some debug printing inside each of those when-let's to see where things go squirrely... (format or princ/terpri... I'd use format, something like: (format t "File was read: ~d lines~%" (length lines)) and (format t "Empty line found: ~d~%" p) ) |
| 14:57.03 | YatharthROCK | d_rossberg, I think EXAMPLES should remain in plural. It's more consistent with the other man pages. |
| 14:57.35 | d_rossberg | which other? do you have an example? |
| 14:57.41 | YatharthROCK | Are you thinking that there's one example, so we should use the singular? |
| 14:58.10 | YatharthROCK | d_rossberg, mged, pixcut, |
| 14:58.23 | YatharthROCK | But wait, ir-X uses Example |
| 14:58.32 | YatharthROCK | OK, fine. I'll change it. |
| 14:58.49 | d_rossberg | ok, i've two examples for the singular: the old g2asc and patch-g |
| 14:59.50 | *** join/#brlcad Silvrous (4f704459@gateway/web/freenode/ip.79.112.68.89) | |
| 15:00.19 | ``Erik | the 'normal' section name is EXAMPLES, even if it's singular |
| 15:00.29 | d_rossberg | in the case of mged and pixcut there are really more than one comand example with mged or pixcut |
| 15:01.34 | Notify | 03GCI: dmusan: Crash our raytracer application reliably - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/8018211 |
| 15:01.54 | YatharthROCK | d_rossberg, I see. Should there be any other changes? |
| 15:02.30 | d_rossberg | ``Erik: do you have an example for EXAMPLES where the command is only used once? (as in g2asc, asc2g, patch-g) |
| 15:02.59 | ``Erik | man diff |
| 15:04.24 | d_rossberg | there is no example at all: http://unixhelp.ed.ac.uk/CGI/man-cgi?diff |
| 15:04.32 | ``Erik | erik@bz /usr/share/man/man1$ zgrep EXAMPLES * 2>/dev/null | wc -l ; zgrep 'EXAMPLE[^S]' * 2>/dev/null | wc -l |
| 15:04.36 | ``Erik | <PROTECTED> |
| 15:04.38 | ``Erik | <PROTECTED> |
| 15:05.06 | ``Erik | the man page on bz has a single example in the EXAMPLES section |
| 15:08.58 | ``Erik | hm, krb5 seems to use EXAMPLE as a section name, and 3 other manpages in the entire set |
| 15:09.35 | ``Erik | would think that EXAMPLES is far more common and would be nicer to semantic parsers *shrug* |
| 15:11.38 | d_rossberg | YatharthROCK: ok, leave it at examples, we found somebody guilty |
| 15:11.57 | ``Erik | I can ask starseeker how it relates to docbook when he gets out of his meeting, I believe a long term goal is to generate roff manpages from docbook sources |
| 15:13.25 | d_rossberg | YatharthROCK: set the task to "needs review" again |
| 15:14.11 | d_rossberg | if there is a standard it would be another gci task to change our man-pages accordingly |
| 15:16.04 | *** part/#brlcad alezakos (~kongr45gp@unaffiliated/alezakos) | |
| 15:19.22 | Notify | 03GCI: Skriptkid: Integrate new thread affinity interface into LIBBU and LIBRT - Compilation Errors Compilation errors fixed http://www.google-melange.com/gci/task/view/google/gci2012/8070202 |
| 15:22.52 | *** join/#brlcad Skriptkid_ (~Skriptkid@117.202.106.44) | |
| 15:23.07 | *** part/#brlcad Skriptkid (~Skriptkid@117.202.106.44) | |
| 15:29.53 | maths22 | ``Erik: I will redwonload the file in case I opened it in notepad and corrupted it. |
| 15:33.11 | ``Erik | if you want, I can make a tarball or zip file of all those emails, so you can grab 'em all in one whack |
| 15:59.18 | *** join/#brlcad Skriptkid (~Skriptkid@117.202.106.44) | |
| 16:31.28 | *** join/#brlcad milamber (~devlin@d118-75-244-176.try.wideopenwest.com) | |
| 16:43.39 | Notify | 03GCI: Deep Inder Singh: Layout "MGED Interface" Reference Document - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/7953233 |
| 16:44.19 | Notify | 03GCI: Sean: Layout "MGED Interface" Reference Document - Task Assigned This task has been assigned to Deep Inder Singh. You have 72 hours to complete this task, good luck! http://www.google-melange.com/gci/task/view/google/gci2012/7953233 |
| 16:47.20 | Notify | 03GCI: Yatharth Agarwal: Add missing documentation for any one command (#2) - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/8126204 |
| 16:47.40 | *** join/#brlcad Skriptkid (~Skriptkid@117.202.106.44) | |
| 16:50.41 | YatharthROCK | d_rossberg, Ready for review |
| 16:51.35 | YatharthROCK | brlcad, Can you close this task? d_rossberg already approved it. See patch-v4. http://www.google-melange.com/gci/task/view/google/gci2012/8126204 |
| 16:55.07 | YatharthROCK | ``Erik, Are you a mentor? And how do you get some of your messages to appear differently? |
| 16:55.15 | YatharthROCK | is trying to do it |
| 16:55.35 | YatharthROCK | is happy he figured it out |
| 16:55.53 | YatharthROCK | says the same thing works in Googe Talk |
| 16:56.15 | YatharthROCK | realizes that both are based on XMPP/Jabber, so that would be logical |
| 16:56.21 | YatharthROCK | likes easter eggs |
| 17:04.13 | Notify | 03GCI: gcking: Append CMake build flags to the end of a compile line - Ready for review Can you please review my work? http://www.google-melange.com/gci/task/view/google/gci2012/8106206 |
| 17:04.15 | *** join/#brlcad Skriptkid (~Skriptkid@117.202.106.44) | |
| 17:04.54 | Notify | 03GCI: Melange: Integrate new thread affinity interface into LIBBU and LIBRT - No more Work can be submitted Melange has detected that the deadline has passed and no more work can be submitted. The submitted work should be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/8070202 |
| 17:10.46 | Notify | 03GCI: Melange: Append CMake build flags to the end of a compile line - No more Work can be submitted Melange has detected that the deadline has passed and no more work can be submitted. The submitted work should be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/8106206 |
| 17:28.42 | *** join/#brlcad Skriptkid (~Skriptkid@117.202.106.44) | |
| 17:56.38 | *** join/#brlcad brlcad_ (~brlcad@ip72-193-246-126.lv.lv.cox.net) | |
| 17:57.39 | brlcad_ | i need to replace strcmp and malloc with the similar bu calls, but i forgot how to access the reference sheet that explains what function should be replaced with bu_ functions |
| 17:57.49 | brlcad_ | functions* |
| 17:57.59 | gmercer015 | ^ |
| 18:02.10 | caen23_ | gmercer015: read HACKING |
| 18:06.42 | *** join/#brlcad Skriptkid (~Skriptkid@117.202.106.44) | |
| 18:09.11 | gmercer015 | thanks |
| 18:14.09 | ``Erik | YatharthROCK: yes, I used /me (ctcp action command), and irc is irc, not jabber :D |
| 18:15.20 | ``Erik | brlcad_: vegas? O.o and should we have a standard for man page section names? there was discussion on EXAMPLE vs EXAMPLES earlier |
| 18:15.41 | ``Erik | doh, heh, should read further |
| 18:16.21 | ``Erik | gmercer015: you can also grep bu.h for the func name |
| 18:19.07 | ``Erik | starseeker: http://paste.lisp.org/display/134223 |
| 18:26.54 | Notify | 03GCI: Stefan: Compile BRL-CAD using Dev-C++ - Claim Removed The claim on this task has been removed, someone else can claim it now. http://www.google-melange.com/gci/task/view/google/gci2012/7945220 |
| 18:30.01 | Notify | 03GCI: bill_cooperman: Create a utility library (LIBBU) API unit test ... for malloc.c - Claim Removed The claim on this task has been removed, someone else can claim it now. http://www.google-melange.com/gci/task/view/google/gci2012/7953237 |
| 18:33.05 | *** join/#brlcad Skriptkid (~Skriptkid@117.202.106.44) | |
| 18:56.18 | Notify | 03BRL-CAD:bob1961 * 54109 brlcad/trunk/src/tclscripts/archer/SketchEditFrame.tcl: Added the ability to toggle between detailed sketch edit mode and general sketch edit mode (Archer). |
| 19:10.17 | *** join/#brlcad YatharthROCK (~YatharthR@95.175.83.246) | |
| 19:26.04 | ``Erik | <PROTECTED> |
| 19:27.22 | maths22 | ``Erik: do you want me to run it on #maths22 with the set of files? |
| 19:34.29 | ``Erik | that's up to you, I was just looking at the contents of the notices queue when I tested it last.. you can spam #notify if you want |
| 19:42.15 | maths22 | I am putting them out on notify right now. |
| 19:43.29 | maths22 | I will stop it. Some of them look really strange. |
| 19:45.01 | ``Erik | your regex's sometimes pick up the html chunk and sometimes the plain text chunk |
| 19:45.33 | ``Erik | that was the reason for the really long regex to find the position, it searched for the plaintext variant |
| 19:47.05 | maths22 | The HTML variant is easier to reliably find things in. I will see if I can make it work. |
| 19:49.04 | ``Erik | if I had the time and interest, my approach would be to split the mail into parts as specified my mime, grab the html one, then use something like closure-html to parse the file to a dom and directly grab the pieces... that'd be the most robust |
| 19:49.16 | ``Erik | s/my mime/by mime/ |
| 19:52.40 | maths22 | What does that last line mean? |
| 19:53.02 | ``Erik | sed substitution pattern, s/<old>/<new>/ |
| 20:12.42 | *** join/#brlcad rptynan (~poiuyt@86-46-73-14-dynamic.b-ras1.wtd.waterford.eircom.net) | |
| 20:26.52 | *** join/#brlcad milamber (~devlin@d118-75-244-176.try.wideopenwest.com) | |
| 20:57.04 | Notify | 03BRL-CAD:r_weiss * 54110 brlcad/trunk/src/other/openNURBS/opennurbs_system.h: Bug fix in file "opennurbs_system.h" for the update to openNURBS 20121024. There was a problem when the update patch was applied. This should fix/improve building on Windows. |
| 21:24.59 | Notify | 03BRL-CAD:r_weiss * 54111 brlcad/trunk/src/other/openNURBS/CMakeLists.txt: Bug fix in "CMakeLists.txt" for the update to openNURBS 20121024. Changed setting to not build "opennurbs_precompiledheader.cpp". This should fix/improve building on Windows. |
| 22:06.18 | Notify | 03BRL-CAD:carlmoore * 54112 brlcad/trunk/src/conv/dxf/bot-bldxf.c: remove h option, and combine Usage statements |
| 22:09.40 | starseeker | eep |
| 22:09.57 | starseeker | this is impressive, in a scary sort of way: http://gamesareevil.com/2010/03/developers-developers-developers/ |
| 22:17.15 | andrei | "so many places to work at " |
| 23:12.44 | starseeker | brlcad: do you suppose a valid GCI task could be to set up the timelineJS setup? http://timeline.verite.co/ |
| 23:13.26 | starseeker | would like to try using that to organize some historical timelines for BRL-CAD and BRL history... |
| 23:18.18 | starseeker | or if there's a better timeline module that'd be cool too... |
| 23:44.41 | maths22 | ``Erik: could I have some more time? I am having some issues with the parsing, and cannot work more on it today. |