| 00:12.33 | *** join/#brlcad sid__ (6ce24073@gateway/web/freenode/ip.108.226.64.115) | |
| 00:17.38 | sid__ | want to claim link orphaned websites, familiarizing brl-cad wiki...i found list of orphaned pages, but where do i link them? |
| 00:22.00 | Notify | 03GCI: javamonn: Create a flex+bison tutorial - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/7985245 |
| 00:27.02 | ``Erik | sid__ which gci url? |
| 00:27.42 | sid__ | http://brlcad.org/wiki/Special:Lonelypages |
| 00:28.24 | sid__ | this is the actual gci url |
| 00:28.25 | sid__ | http://www.google-melange.com/gci/task/view/google/gci2012/8095206 |
| 00:32.03 | ``Erik | they should be linked from related pages in a reasonable fashion... the first step is to create a document explaining how they'll be linked for review |
| 00:32.44 | ``Erik | like, um, GeometryREQFAIL is related to the GeometryREQ page, so that might be a good page to link from |
| 00:34.30 | sid__ | so do the document first explaining how i will link, upload that, then wait for approval? what does it mean to "link from"? |
| 00:35.54 | sid__ | like GeometryREQ, i can start with that page and add links to the page? |
| 00:55.45 | ``Erik | yes, document explaining what you intend to do, there'll be feedback on that, once that plan is approved, you modify the wiki pages |
| 00:57.09 | ``Erik | and GeometryREQ would be a good page to add a to GeometryREQFAIL on |
| 00:59.56 | sid__ | ok, understand...thanks |
| 01:01.52 | ``Erik | np, good luck |
| 01:01.58 | sid__ | thanks bye |
| 01:06.08 | *** join/#brlcad milamber (~devlin@d118-75-244-176.try.wideopenwest.com) | |
| 01:21.40 | Notify | 03GCI: Sid Robinson: Link all of our orphaned website wiki pages - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/8095206 |
| 01:28.34 | *** join/#brlcad Skriptkid (~Skriptkid@117.208.186.187) | |
| 02:08.25 | *** join/#brlcad Skriptkid (~Skriptkid@117.208.186.187) | |
| 02:12.27 | *** join/#brlcad milamber (~devlin@d118-75-244-176.try.wideopenwest.com) | |
| 02:40.29 | *** join/#brlcad milamber (~devlin@d118-75-244-176.try.wideopenwest.com) | |
| 05:10.27 | *** join/#brlcad milamber (~devlin@d118-75-244-176.try.wideopenwest.com) | |
| 06:13.41 | *** join/#brlcad EricPoehlsen (~Eric@ip-109-41-71-150.web.vodafone.de) | |
| 06:45.15 | *** join/#brlcad cristina (~quassel@79.114.150.220) | |
| 07:17.58 | *** join/#brlcad Ashish101 (75c22479@gateway/web/freenode/ip.117.194.36.121) | |
| 07:17.59 | *** join/#brlcad NikolayKotsev (4e5aab27@gateway/web/freenode/ip.78.90.171.39) | |
| 07:18.53 | Ashish101 | Hello... I just came in to ask why i have no replys on my Task -http://www.google-melange.com/gci/task/view/google/gci2012/8017216 |
| 07:22.41 | Ashish101 | And yet another request....... http://www.google-melange.com/gci/task/view/google/gci2012/8123204 --- This task can i make a sample wordpress site that can show you and give u an idea how i want to see brlcad...... Ps the guy currently working on the task has finished its time and if there is a follow up task to this i would like to work on it...... Pps. I will make the site not on .wordpress.org domain but on a custom su |
| 07:24.08 | NikolayKotsev | I'm here to ask a question about other task. The question is same as yesterday. Do the mentor of this : http://www.google-melange.com/gci/task/view/google/gci2012/7992230 want us to use something like "Subtree merging" or something else? |
| 07:39.49 | *** join/#brlcad andrei_ (~andrei@79.117.232.57) | |
| 08:24.53 | *** join/#brlcad Ashish101 (75c22479@gateway/web/freenode/ip.117.194.36.121) | |
| 08:26.23 | *** join/#brlcad cristina (~quassel@79.114.150.220) | |
| 08:33.42 | NikolayKotsev | Hello. I would like to ask a question. Do the mentor of this : http://www.google-melange.com/gci/task/view/google/gci2012/7992230 want us to use something like "Subtree merging" or something else? |
| 10:44.35 | *** join/#brlcad Silvrous (4f704459@gateway/web/freenode/ip.79.112.68.89) | |
| 11:10.45 | *** join/#brlcad Skriptkid (~Skriptkid@117.208.186.187) | |
| 11:14.11 | *** part/#brlcad Skriptkid (~Skriptkid@117.208.186.187) | |
| 11:23.46 | *** join/#brlcad Skriptkid (~Skriptkid@117.208.186.187) | |
| 11:25.49 | caen23 | Skriptkid: can i have the password for the mac slave? Bcmacslave! does not seem to work? |
| 11:27.28 | Skriptkid | caen23: Why would you need that? To login? |
| 11:27.55 | Skriptkid | Because the mac password is only for the master to authenticate the slave |
| 11:28.28 | Skriptkid | caen23: Anyway, regardless of your purpose, it's an Uppercase 'S.' "BcmacSlave!" |
| 11:29.10 | caen23 | well… when your mac is turned off, i can run the slave on mine |
| 11:29.33 | caen23 | thanks |
| 11:29.55 | Skriptkid | caen23: Sure :). But I suggest you create another slave for your machine |
| 11:30.14 | Skriptkid | Shall I add one more slave in the config? For your Mac? |
| 11:30.35 | caen23 | i don't think it's necessary, it's almost the same setup |
| 11:30.58 | Skriptkid | Okay |
| 11:31.33 | Skriptkid | Hang on |
| 11:31.37 | Skriptkid | I'll disconnect mine |
| 11:31.44 | caen23 | no need, unless you want to |
| 11:31.45 | Skriptkid | caen23 |
| 11:31.51 | Skriptkid | You aren't testing now? |
| 11:32.44 | Skriptkid | Two slaves with same name and password together will probably show up an error |
| 11:33.14 | caen23 | yesterday, i managed to get it to compile properly on the mac (needs a few adjustments to make the patch better, but it works), but your slave was not online so i couldn't run the build to see if it's okay. i will only use it when yours is offline :D |
| 11:33.42 | NikolayKotsev | Hello. I would like to ask a question. Do the mentor of this : http://www.google-melange.com/gci/task/view/google/gci2012/7992230 want us to use something like "Subtree merging" or something else? |
| 11:35.37 | Skriptkid | caen23: okay :) But are you sure you don't need a slave configured? It wont be of any trouble to me. It's a 5 minute process. |
| 11:37.35 | caen23 | i don't think it's necessary, i think it's the same setup, but if you want to, i'll pm you a password |
| 11:37.56 | Skriptkid | caen23: Alright |
| 11:39.03 | Skriptkid | caen23: If I'm not on IRC, leave it as a comment on your Mac Compilation errors task. |
| 11:49.11 | Skriptkid | brlcad: The slaves are downloading now. They just needed to be triggered by a change of trunk. |
| 11:51.16 | caen23 | you can force a build |
| 11:59.08 | *** join/#brlcad Skriptkid (~Skriptkid@117.208.184.37) | |
| 12:00.42 | caen23 | Skriptkid: your buildslave seems broken. i think you shouldn't run mkdir before create-slave. if you run mkdir, you become the owner of the directory, but if you don't, the slave is the owner. there are some errors related to that on the buildbot page |
| 12:03.20 | Skriptkid | caen23: But I haven't experienced any problem with that on any of the 4 platforms. I don't think the compilation errors are related to that. |
| 12:04.04 | caen23 | they're not compilation errors: http://crit.brlcad.org/buildbot/builders/mac-tester/builds/10/steps/svn/logs/stdio |
| 12:07.11 | Skriptkid | caen23: Thanks for pointing that out :) Ill fix it |
| 12:11.26 | Skriptkid | caen23: Did you attempt to connect through mac-slave? Because it just disconnected and when reconnected, the whole source is gone. |
| 12:11.46 | caen23 | right now, no |
| 12:12.49 | Skriptkid | OKay |
| 12:13.10 | Skriptkid | caen23: Did you fix the Mac compilation errors? |
| 12:13.14 | Skriptkid | on that task? |
| 12:14.05 | caen23 | yes, it now compiles properly on my machine, i want to know if buildbot says it's fine, too |
| 12:14.48 | Skriptkid | If it compiles on your machine, it will compile on buildbot. Beacuse buildbot uses the resources on your system |
| 12:15.35 | caen23 | i know, i just wanted to see it on that page :) |
| 12:16.10 | Skriptkid | okay. Then start your buildbot. |
| 12:16.29 | Skriptkid | caen23: Or you can wait |
| 12:16.59 | Skriptkid | (if the fixes have been applied yet.) Because min'es building now. |
| 12:17.08 | Skriptkid | *mines |
| 12:17.40 | Skriptkid | So it'll test it and you can read the report |
| 12:17.54 | caen23 | mine is started, but i can't figure out how to force a build if i haven't built once already |
| 12:18.36 | Skriptkid | I'l do it |
| 12:19.35 | Skriptkid | Login to buildbot |
| 12:19.38 | Skriptkid | check your pm |
| 12:23.11 | Skriptkid | caen23: Crap. That can't be done. Needs some more configuration of the master. Give me 5 mins. I'll do it and logout. You log in and force your build |
| 12:53.28 | *** join/#brlcad Skriptkid (~Skriptkid@117.208.184.37) | |
| 12:59.54 | Notify | 03GCI: Melange: Create an "MGED Interface" reference sheet (#2) - No more Work can be submitted Melange has detected that the deadline has passed and no more work can be submitted. The submitted work should be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/8017216 |
| 12:59.55 | Notify | 03GCI: Erythreas34: Crash Archer reliably (#3) - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/7994230 |
| 12:59.56 | Notify | 03GCI: Erythreas34: Crash Archer reliably (#3) - Claim Removed The claim on this task has been removed, someone else can claim it now. http://www.google-melange.com/gci/task/view/google/gci2012/7994230 |
| 12:59.57 | Notify | 03GCI: javamonn: Compile with -Wold-style-definition, fix warnings that ensue - Where do I submit? Where can I submit the build log, and also a revised patch? I made a couple tweaks to the patch, it wouldn't compile before apparently. As far as termio, it has two functions in which the parameter types are system dependent. In the old c... http://www.google-melange.com/gci/task/view/google/gci2012/8114205 |
| 12:59.58 | Notify | 03GCI: Melange: Create a utility library (LIBBU) API unit test ... for hash.c - Task Reopened Melange has detected that the final deadline has passed and it has reopened the task. http://www.google-melange.com/gci/task/view/google/gci2012/8031205 |
| 12:59.59 | Notify | 03GCI: Harmanpreet Singh: Create a flex+bison tutorial - Task Assigned This task has been assigned to javamonn. You have 48 hours to complete this task, good luck! http://www.google-melange.com/gci/task/view/google/gci2012/7985245 |
| 13:00.00 | Notify | 03GCI: Harmanpreet Singh: Find and Fix 10 spelling mistakes in at least 10 different files (#2) - Task Assigned This task has been assigned to amit.daBeast. You have 72 hours to complete this task, good luck! http://www.google-melange.com/gci/task/view/google/gci2012/8103205 |
| 13:00.01 | Notify | 03GCI: Nikolay Kotsev: Demonstrate merging two independent repos with GIT, write tutorial - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/7992230 |
| 13:00.02 | Notify | 03GCI: Sean: Link all of our orphaned website wiki pages - Task Assigned This task has been assigned to Sid Robinson. You have 72 hours to complete this task, good luck! http://www.google-melange.com/gci/task/view/google/gci2012/8095206 |
| 13:00.03 | Notify | 03GCI: Sean: Demonstrate merging two independent repos with GIT, write tutorial - Task Assigned This task has been assigned to Nikolay Kotsev. You have 72 hours to complete this task, good luck! http://www.google-melange.com/gci/task/view/google/gci2012/7992230 |
| 13:00.04 | Notify | 03GCI: Sean: Mock up new BRL-CAD website interface design (#5) - anything The site design can be mocked up in pretty much anything that we can preview. Using WP is acceptable BUT you can't just put our content into WP, turn a few modules on and off, set some colors, and call it done. For any of the design mock up tasks, any submitted design... http://www.google-melange.com/gci/task/view/google/gci2012/8123204 |
| 13:00.05 | Notify | 03GCI: Sean: Mock up new BRL-CAD website interface design (#5) - professional appeal Amitoj, your design still lacks a usable professional appeal, but I think you've now put in reasonable effort on this task to call it complete. You fulfilled the submission criteria and responded to our critique, so thank you for your efforts. Your design... http://www.google-melange.com/gci/task/view/google/gci2012/8123204 |
| 13:00.06 | Notify | 03GCI: Sean: Mock up new BRL-CAD website interface design (#5) - Task Closed Congratulations, this task has been completed successfully. http://www.google-melange.com/gci/task/view/google/gci2012/8123204 |
| 13:00.07 | Notify | 03GCI: Sean: Find and Fix 5 spelling mistakes in at least 40 different files (#2) - see See http://brlcad.org/wiki/Compiling or http://brlcad.org/wiki/Deuces for help getting started. http://www.google-melange.com/gci/task/view/google/gci2012/8093205 |
| 13:00.08 | Notify | 03GCI: Sean: Set up a Buildbot continuous integration compile slave for Linux - why is there no build? It seems to indicate that no build has been attempted? Same with the win-tester builder. There should be a build log, even if it's a failure... http://www.google-melange.com/gci/task/view/google/gci2012/8125203 |
| 13:00.09 | Notify | 03GCI: Sean: Set up a Buildbot continuous integration compile slave for Linux - Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once you re-submit your work. http://www.google-melange.com/gci/task/view/google/gci2012/8125203 |
| 13:00.10 | Notify | 03GCI: Sean: Update our VM disk image - nice work Cezar, that looks really good. The dev-7.22.1 is correct, not .0 since that would be for a rel- version. The bullet failure is interesting (worthy of task?). As for the README and brlcad-build, I believe that was cleaned out due to the VM size getting a little out of hand. What are you up to... http://www.google-melange.com/gci/task/view/google/gci2012/8013221 |
| 13:00.11 | Notify | 03GCI: Sean: Update our VM disk image - Task Closed Congratulations, this task has been completed successfully. http://www.google-melange.com/gci/task/view/google/gci2012/8013221 |
| 13:00.12 | Notify | 03GCI: Sean: Create a numerics library (LIBBN) API unit test ... for poly.c - indentation Note that the indentation is still wrong. You used spaces for indentation and our style calls for mixed spaces and tabs. (4spc, 1tab, 1tab+4spcs, 2tabs, etc). You've put good effort, but please take note of the this detail in any future patches. http://www.google-melange.com/gci/task/view/google/gci2012/7984226 |
| 13:00.13 | Notify | 03GCI: Sean: Create an "MGED Interface" reference sheet (#2) - layout, concise So content-wise, you are spot-on and have done well to describe everything listed. The layout/style/design, however, is a bit insane though... :) 10 pages! Try to fit that all on just 1 or 2 pages. These will be "print-quality" pages, so it's okay to go all the... http://www.google-melange.com/gci/task/view/google/gci2012/8017216 |
| 13:00.14 | Notify | 03GCI: Sean: Create an "MGED Interface" reference sheet (#2) - Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once you re-submit your work. http://www.google-melange.com/gci/task/view/google/gci2012/8017216 |
| 13:00.15 | Notify | 03GCI: Sean: Create an "MGED Interface" reference sheet (#2) - Deadline extended The deadline of the task has been extended with 2 days and 0 hours. http://www.google-melange.com/gci/task/view/google/gci2012/8017216 |
| 13:00.16 | Notify | 03GCI: Cezar: Fix Mac OS X compilation errors under Buildbot - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/8081208 |
| 13:00.17 | Notify | 03GCI: Sean: Compile BRL-CAD on Windows using Cygwin (attempt #2) - Task Closed Congratulations, this task has been completed successfully. http://www.google-melange.com/gci/task/view/google/gci2012/7961226 |
| 13:00.18 | Notify | 03GCI: Sean: Create a COMPREHENSIVE unit test for bn_dist_pt3_pt3() - Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once you re-submit your work. http://www.google-melange.com/gci/task/view/google/gci2012/7973230 |
| 13:00.19 | Notify | 03GCI: Sean: Create a COMPREHENSIVE unit test for bn_dist_pt3_pt3() - almost :) Heh, almost. Now you have the reverse problem. The scanf() function says %lf must be a double, yet you're providing a fastf_t. You need to scan into a double and copy into a fastf_t in order to pass to the function (see include/vmath.h: VMOVE()). Use point_t... http://www.google-melange.com/gci/task/view/google/gci2012/7973230 |
| 13:00.20 | Notify | 03GCI: Sean: Create a COMPREHENSIVE unit test for bn_dist_pt3_pt3() - Deadline extended The deadline of the task has been extended with 1 days and 0 hours. http://www.google-melange.com/gci/task/view/google/gci2012/7973230 |
| 13:00.21 | Notify | 03GCI: Sean: Fix Mac OS X compilation errors under Buildbot - Task Assigned This task has been assigned to Cezar. You have 48 hours to complete this task, good luck! http://www.google-melange.com/gci/task/view/google/gci2012/8081208 |
| 13:00.22 | Notify | 03GCI: Cezar: Fix Mac OS X compilation errors under Buildbot - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/8081208 |
| 13:00.23 | Notify | 03GCI: Cezar: Fix Mac OS X compilation errors under Buildbot - Patch This patch seems to work on my Mac, and it didn't break GCC compilation either. But I'm not sure if the changes are safe. Also, it's committed as r54119 http://www.google-melange.com/gci/task/view/google/gci2012/8081208 |
| 13:00.24 | Notify | 03GCI: Sean: Fix Mac OS X compilation errors under Buildbot - Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once you re-submit your work. http://www.google-melange.com/gci/task/view/google/gci2012/8081208 |
| 13:00.25 | Notify | 03GCI: Cezar: Update our VM disk image - Title Yes, I think the Bullet failure could be fixed as a task. My ova is 3.37 GB, twice the size of the original. Imported, it's almost 10 GB. Pretty large. I'll try condensing the README even more. http://www.google-melange.com/gci/task/view/google/gci2012/8013221 |
| 13:00.26 | Notify | 03GCI: Sean: Fix Mac OS X compilation errors under Buildbot - compiles, but... That's not a safe change. The bu_offsetof() macro intentionally leverages a compiler built-in offsetof() macro/function. The version you left assumes that if a given structure were allocated at memory address 0, the offset into the array is fixed. In practice, that... http://www.google-melange.com/gci/task/view/google/gci2012/8081208 |
| 13:00.27 | Notify | 03GCI: Sean: Update our VM disk image - where Where's the extra size coming from? Did the original not have BRL-CAD pre-installed? http://www.google-melange.com/gci/task/view/google/gci2012/8013221 |
| 13:00.28 | Notify | 03GCI: Sean: Compile with -Wold-style-definition, fix warnings that ensue - sourceforge You can submit your updated files to our Sourceforget patches tracker and just leave a comment here with the URL. You can attach files to the tracker item you create. As for the crazy ifdef logic, just create three copies of the copy_Tio() declaration... http://www.google-melange.com/gci/task/view/google/gci2012/8114205 |
| 13:00.29 | Notify | 03GCI: Sean: Link all of our orphaned website wiki pages - see where it fits See where the results fit in. You plan sounds reasonable on the surface. How they get linked into the page will matter, though and you shouldn't just cold-drop a link on the page. It needs to flow with the page like everything else. Grouping the fails/sets together... http://www.google-melange.com/gci/task/view/google/gci2012/8095206 |
| 13:00.30 | Notify | 03GCI: Melange: Web interface (AJAX?) to MGED - Task Reopened Melange has detected that the final deadline has passed and it has reopened the task. http://www.google-melange.com/gci/task/view/google/gci2012/7993224 |
| 13:00.31 | Notify | 03GCI: Sean: Compile with -Wwrite-strings, fix warnings that ensue - have the right idea Sounds like you have/had the right idea before you unclaimed. Instead of removing lines of code, though, you'll need to propagate 'const' in a lot of places. http://www.google-melange.com/gci/task/view/google/gci2012/8090205 |
| 13:00.32 | Notify | 03GCI: Sean: Create numerics library (LIBBN) API unit test ... for axis.c - reclaim You're welcome to reclaim the task. http://www.google-melange.com/gci/task/view/google/gci2012/8022215 |
| 13:00.33 | Notify | 03GCI: Sean: Compile BRL-CAD using Dev-C++ - he one that works? You should use any generator that works with Dev-C++. http://www.google-melange.com/gci/task/view/google/gci2012/7945220 |
| 13:00.34 | Notify | 03GCI: Sean: Compile BRL-CAD using Dev-C++ - Deadline extended The deadline of the task has been extended with 0 days and 12 hours. http://www.google-melange.com/gci/task/view/google/gci2012/7945220 |
| 13:00.35 | Notify | 03GCI: Cezar: Update our VM disk image - Size I forgot to remove the previous installation, but even now, the VM is 9.55 in size and the *.ova is the same. Could all the updates amount to so much space? http://www.google-melange.com/gci/task/view/google/gci2012/8013221 |
| 13:00.36 | Notify | 03GCI: Sean: Add a command-line option that sets an object color temporarily - close questions Your questions are basically asking "where's the code that does this for me?" We never said there was. ;) The task could involve the rt_do_cmd() if you like, but it's enough work to figure out how to set the color (see what some of the ged... http://www.google-melange.com/gci/task/view/google/gci2012/8126202 |
| 13:00.37 | Notify | 03GCI: Sean: Update our VM disk image - nope Unlikely that space is related to updates. You should figure out where all the space is going. What are your top-100 directories, for example. How do those compare with the old and new? Something like: find / -type directory -exec du -ks {} \; will probably take a long time, but should give you... http://www.google-melange.com/gci/task/view/google/gci2012/8013221 |
| 13:00.38 | Notify | 03GCI: Sean: Implement a primitive centroid function ... for elliptical hyperboloids (EHY) - in the comments Aaron, that looks fantastic, but it certainly could be included in the source code comments. See http://brlcad.svn.sourceforge.net/viewvc/brlcad/brlcad/trunk/src/librt/primitives/ehy/ehy.c for an example of another primitive with... http://www.google-melange.com/gci/task/view/google/gci2012/7975237 |
| 13:00.39 | Notify | 03GCI: Cezar: Update our VM disk image - brlcad-build Apparently, it's because I kept the brlcad-build directory. Should I remove the contents? http://www.google-melange.com/gci/task/view/google/gci2012/8013221 |
| 13:00.40 | Notify | 03GCI: Cezar: Update our VM disk image - Docs Could it be because of the docs? With the conversion to DocBook, it now generates quite a lot of PDFs. http://www.google-melange.com/gci/task/view/google/gci2012/8013221 |
| 13:00.41 | Notify | 03GCI: Skriptkid: Set up a Buildbot continuous integration compile slave for Linux - Downloading It's downloading now. Unless somebody forces a build("Force Build" option on the page of the slave,) it does not download the source untill there's a new revision, which will trigger it. http://www.google-melange.com/gci/task/view/google/gci2012/8125203 |
| 13:00.42 | Notify | 03GCI: Skriptkid: Set up a Buildbot continuous integration compile slave for Linux - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/8125203 |
| 13:00.43 | Notify | 03GCI: Skriptkid: Add a command-line option that sets an object color temporarily - So... This task only involves adding that option support, but not doing anything with it? http://www.google-melange.com/gci/task/view/google/gci2012/8126202 |
| 13:29.15 | Notify | 03GCI: Cezar: Update our VM disk image - Readme I got the Readme down to 288 words, is this enough? http://www.google-melange.com/gci/task/view/google/gci2012/8013221 |
| 13:32.17 | *** join/#brlcad EricPoehlsen (~Eric@ip-109-84-235-235.web.vodafone.de) | |
| 13:38.52 | *** join/#brlcad Skriptkid (~Skriptkid@117.208.184.37) | |
| 14:36.44 | *** join/#brlcad Skriptkid (~Skriptkid@117.208.184.37) | |
| 14:42.15 | Notify | 03GCI: Vibhav Pant: Implement a primitive volume function ... for gridded volumes (VOL) - Could the deadline be extended Due to lack of time, I could not work on the patch. Could you please extended the deadline with 2 days? http://www.google-melange.com/gci/task/view/google/gci2012/7998215 |
| 14:53.30 | *** join/#brlcad Ashish101 (75c22479@gateway/web/freenode/ip.117.194.36.121) | |
| 15:02.48 | Notify | 03GCI: Cezar: Fix Mac OS X compilation errors under Buildbot - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/8081208 |
| 15:15.13 | Ashish101 | Hello....one very small question ... in the command windows--- below everything what is the meaning of cent(EXT ETC) and lots of random nubers ?? |
| 15:21.56 | Ashish101 | ?? |
| 15:31.42 | *** join/#brlcad Suryajith (~Stattrav@122.170.69.244) | |
| 15:35.00 | *** join/#brlcad Skriptkid (~Skriptkid@117.208.184.37) | |
| 15:41.15 | Ashish101 | Anyone there ?? |
| 15:48.24 | *** join/#brlcad Skriptkid (~Skriptkid@117.208.184.37) | |
| 15:50.24 | andrei_ | Ashish101: I am not entirely sure but you might be looking at a binary file |
| 15:50.35 | Ashish101 | Oh thanks :) |
| 16:13.47 | *** join/#brlcad Alex___ (d405882d@gateway/web/freenode/ip.212.5.136.45) | |
| 16:13.56 | Alex___ | gci mentors? |
| 16:24.37 | Ashish101 | Alex____: |
| 16:24.53 | Ashish101 | Read the instructions at the top of the page |
| 16:25.20 | Ashish101 | After logs... logs: |
| 16:25.50 | Ashish101 | Just ask ur question :P I myself have been corrected lots of times for this.... |
| 16:27.23 | ``Erik | Ashish101: those are not random numbers, the cent() values are the view center (lookat) in cartesian coords |
| 16:27.50 | Ashish101 | Thanks..... :) A TON |
| 16:28.28 | ``Erik | np, um, sz is "size", the orthographic projection stretch, um, should be one that's something like ae for azimuth/elevation |
| 16:28.46 | Ashish101 | :) |
| 16:29.16 | ``Erik | as you adjust the view using the mouse, those change... if you give someone all those numbers (plus window size), they can replicate exactly what you're looking at |
| 16:36.07 | Alex___ | i have a task to compile brl-cad with dev c++, but CMAKE says that the compiler is broken |
| 16:37.57 | Skriptkid | quit |
| 16:42.12 | *** join/#brlcad Skriptkid (~Skriptkid@117.208.184.37) | |
| 16:47.50 | Skriptkid | brlcad: All platforms on buildbot are done downloading source. Mac has compiled successfully(caen23's efforts, I belive, I take no credit) and is running benchmark. Linux is compiling. Can you please review it again now? |
| 16:49.57 | *** join/#brlcad EricPoehlsen (~Eric@ip-109-84-104-197.web.vodafone.de) | |
| 16:50.42 | Notify | 03GCI: Alexandur Osenov: Compile BRL-CAD using Dev-C++ - generators So Dev is based on MINGW so i selected mingw makefiles and also selected specified compilers->and selected dev c++ compilers And get an error that says that my compiler is broken (which is not true) and "cant compile simple test program" http://www.google-melange.com/gci/task/view/google/gci2012/7945220 |
| 16:58.01 | Notify | 03BRL-CAD:starseeker * 54120 NIL: Create branch for some bullet testing. |
| 17:01.16 | Notify | 03GCI: Melange: Crash our raytracer application reliably - Task Reopened Melange has detected that the final deadline has passed and it has reopened the task. http://www.google-melange.com/gci/task/view/google/gci2012/8018211 |
| 17:09.14 | Notify | 03GCI: Ashish: Create an "MGED Interface" reference sheet (#2) - Done I had no idea how to coincise 10 pages into 1-2 so i just ollowed the example http://izatxamir.files.wordpress.com/2010/04/visio-2007-quick-reference-1.jpg here Hope this is good enough http://www.google-melange.com/gci/task/view/google/gci2012/8017216 |
| 17:12.31 | Notify | 03GCI: Ashish: Create an "MGED Interface" reference sheet (#2) - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/8017216 |
| 17:16.48 | *** join/#brlcad milamber (~devlin@d118-75-244-176.try.wideopenwest.com) | |
| 17:17.26 | *** join/#brlcad louipc (~louipc@archlinux/fellow/louipc) | |
| 17:18.06 | Ashish101 | Is this ok ?? ---- http://www.google-melange.com/gci/work/download/google/gci2012/8017216?id=17001 |
| 17:19.43 | *** join/#brlcad Al_Da_Best (Al_Da_Best@5e0e112c.bb.sky.com) | |
| 17:53.05 | *** join/#brlcad Skriptkid_ (~Skriptkid@117.208.184.37) | |
| 17:53.42 | *** part/#brlcad Skriptkid (~Skriptkid@117.208.184.37) | |
| 17:54.13 | *** join/#brlcad milamber (~devlin@d118-75-244-176.try.wideopenwest.com) | |
| 18:21.37 | *** join/#brlcad Skriptkid (~Skriptkid@117.208.184.37) | |
| 18:30.42 | caen23 | Skriptkid: regarding buildbot on windows have you seen this? http://buildbot.net/buildbot/docs/current/manual/cfg-buildsteps.html#visual-c |
| 18:30.57 | caen23 | i think you'll need to create a new build factory and attach it to the windows slave |
| 18:41.43 | Notify | 03BRL-CAD:caen23 * 54121 brlcad/trunk/include/bu.h: Suppress Clang warnings regarding offsetof |
| 18:54.05 | NikolayKotsev | Hello. I would like to ask a question. Do the mentor of this : http://www.google-melange.com/gci/task/view/google/gci2012/7992230 want us to use something like "Subtree merging" or something else? |
| 19:04.28 | Notify | 03BRL-CAD:starseeker * 54122 (brlcad/branches/bullet/INSTALL brlcad/branches/bullet/configure.cmake.sh brlcad/branches/bullet/src/other/CMakeLists.txt): Add stripped down version of bullet 2.81 - simulate command doesn't build with this version yet. |
| 19:20.19 | Notify | 03GCI: amit.daBeast: Find and Fix 10 spelling mistakes in at least 10 different files (#2) - Error while importing I keep getting this error whenever I try importing the BRL-CAD (the error is similiar a comment another person posted) Failed to import appliance C:/Users/Amit/Desktop/BRL-CAD_7.21.0_ubuntu_10.04_LTS_x86_r49726.ova. Could... http://www.google-melange.com/gci/task/view/google/gci2012/8103205 |
| 19:28.44 | *** join/#brlcad Silvrous (4f704459@gateway/web/freenode/ip.79.112.68.89) | |
| 19:29.10 | Silvrous | How do I unit test a memory freeing function such as bn_gauss_free ? |
| 19:33.04 | andrei_ | what's the function prototype? |
| 19:39.30 | Silvrous | void bn_gauss_free(struct bn_gauss *p) |
| 19:40.13 | andrei_ | hmm |
| 19:40.33 | andrei_ | First, try for a null parameter |
| 19:41.10 | andrei_ | then check the struct bn_gauss fields and the function body, it might help you see how fields are used and which situations might cause trouble |
| 19:41.11 | andrei_ | :) |
| 19:59.17 | Silvrous | Thanks. |
| 19:59.31 | *** join/#brlcad Suryajith (~Stattrav@122.170.69.244) | |
| 20:03.23 | *** join/#brlcad ibot (~ibot@rikers.org) | |
| 20:03.23 | *** topic/#brlcad is BRL-CAD || http://brlcad.org || logs: http://ibot.rikers.org/%23brlcad/ || GCI STUDENTS: Have questions? Ask and STAY ON IRC. Don't ask if someone is here, ask what you intended to ask them. See http://brlcad.org/wiki/Deuces to get started! | |
| 20:20.04 | Silvrous | Well, I'm quite sure that passing a null to the function will cause a segfault. In this case I assume I can't test it, right? |
| 20:20.23 | Silvrous | the casae where it gets passed a null, I mean |
| 20:26.44 | andrei_ | no |
| 20:26.58 | andrei_ | I mean, in the test units I have written I have covered that case aswell |
| 20:30.58 | Silvrous | Yes, but in the case the function passes an element of the struct pointer to bu_free, so it would be like trying to do NULL->msr_gausses |
| 20:31.17 | Silvrous | but in this case* |
| 21:11.41 | Notify | 03BRL-CAD:caen23 * 54123 (brlcad/trunk/include/bu.h brlcad/trunk/misc/CMake/CompilerFlags.cmake): Remove #pragma directive and add a warning suppression flag when compiling with Clang. #pragma caused GCC to fail |
| 21:11.43 | Notify | 03GCI: Deep Inder Singh: Layout "MGED Interface" Reference Document - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/7953233 |
| 21:22.39 | Notify | 03GCI: Silvrous: Create a numerics library (LIBBN) API unit test ... for msr.c - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/8001225 |
| 21:23.29 | Notify | 03GCI: Daniela Aleksova: Add missing documentation for any one command (#3) - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/8117203 |
| 21:36.20 | Alex___ | under windows i need to build brl-cad with MVS 2010+ and try for my task i need to try to generate it with Dev c++ compilers? (http://www.google-melange.com/gci/task/view/google/gci2012/7945220) |
| 21:39.41 | Notify | 03GCI: Alexandur Osenov: Compile BRL-CAD using Dev-C++ - mentor Whats you irc chat name? I urgently need to ask you something.. And please give me more time for my task... http://www.google-melange.com/gci/task/view/google/gci2012/7945220 |
| 21:41.06 | *** join/#brlcad milamber (~devlin@d118-75-244-176.try.wideopenwest.com) | |
| 21:44.14 | Notify | 03GCI: Alexandur Osenov: Compile BRL-CAD using Dev-C++ - So far What I`ve tried so far: 1. Try to build brl-cad with Dev-C++ compilers -> failed 2. Succeded in building brl-cad with MVS 2010 3. Succeded in generating brl-cad with MVS 2010 4. Failed to generate it with MINGW makefile generator and Dev-C++ compilers -> The reason is that in... http://www.google-melange.com/gci/task/view/google/gci2012/7945220 |
| 22:00.22 | Notify | 03GCI: Sean: Compile BRL-CAD using Dev-C++ - Deadline extended The deadline of the task has been extended with 1 days and 0 hours. http://www.google-melange.com/gci/task/view/google/gci2012/7945220 |
| 22:03.03 | Notify | 03GCI: Sean: Add missing documentation for any one command (#3) - Task Assigned This task has been assigned to Daniela Aleksova. You have 48 hours to complete this task, good luck! http://www.google-melange.com/gci/task/view/google/gci2012/8117203 |
| 22:18.08 | *** join/#brlcad milamber (~devlin@d118-75-244-176.try.wideopenwest.com) | |
| 22:44.15 | Notify | 03GCI: amit.daBeast: Find and Fix 10 spelling mistakes in at least 10 different files (#2) - Error Fixed Never Mind, I've must have downloaded the wrong BRL-Cad file, I redownloaded BRL-Cad file and i dont get any problems with importing it http://www.google-melange.com/gci/task/view/google/gci2012/8103205 |
| 23:19.31 | Notify | 03GCI: amit.daBeast: Find and Fix 10 spelling mistakes in at least 10 different files (#2) - Patch File I've read on how to create and submit an patch file, but I'm unsure on what to do with it. If I find a mispelled coment, should copy all the contents in the file and paste into the patch file? Or is the patch file a place where i can put... http://www.google-melange.com/gci/task/view/google/gci2012/8103205 |
