| 00:10.27 | Notify | 03GCI: Alexandur Osenov: Compile BRL-CAD using Dev-C++ - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/7945220 |
| 00:38.24 | Notify | 03GCI: Johannes Schulte: Calculate plate-mode triangle mesh (BOT) surface areas - Some annotations The INTCLAMPs had no deeper use, they were just part of the old function, I copied this part from. I removed them now to make the code not to big und complex Thanks for the /include/bn hint, beside the triangle function, I could also use a... http://www.google-melange.com/gci/task/view/google/gci2012/8088204 |
| 00:47.48 | Notify | 03GCI: Johannes Schulte: Calculate plate-mode triangle mesh (BOT) surface areas - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/8088204 |
| 02:31.10 | Notify | 03GCI: Alexandur Osenov: Compile BRL-CAD using Dev-C++ - Claim Removed The claim on this task has been removed, someone else can claim it now. http://www.google-melange.com/gci/task/view/google/gci2012/7945220 |
| 02:31.15 | Notify | 03GCI: Alexandur Osenov: Compile BRL-CAD using Dev-C++ - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/7945220 |
| 02:55.28 | *** join/#brlcad milamber (~devlin@d118-75-244-176.try.wideopenwest.com) | |
| 03:09.16 | *** join/#brlcad milamber (~devlin@d118-75-244-176.try.wideopenwest.com) | |
| 03:20.23 | *** join/#brlcad milamber (~devlin@d118-75-244-176.try.wideopenwest.com) | |
| 03:40.13 | Notify | 03GCI: Harmanpreet Singh: Compile BRL-CAD using Dev-C++ - Task Assigned This task has been assigned to Alexandur Osenov. You have 48 hours to complete this task, good luck! http://www.google-melange.com/gci/task/view/google/gci2012/7945220 |
| 03:42.40 | Notify | 03GCI: Melange: Compile with -Wwrite-strings, fix warnings that ensue - Task Reopened Melange has detected that the final deadline has passed and it has reopened the task. http://www.google-melange.com/gci/task/view/google/gci2012/8090205 |
| 03:44.05 | Notify | 03GCI: Melange: Design a prototype CAD GUI layout (#3) - Task Reopened Melange has detected that the final deadline has passed and it has reopened the task. http://www.google-melange.com/gci/task/view/google/gci2012/8136209 |
| 03:59.46 | Notify | 03GCI: Harmanpreet Singh: Compile BRL-CAD using Dev-C++ - Keep the task claimed if you want your submitted work reviewed Hi Alexandur, If you want your submitted work reviewed you should keep the task claimed. Since you unclaimed the task after submitting your work and then reclaim it, so now your work in not in the queue of tasks awaiting... http://www.google-melange.com/gci/task/view/google/gci2012/7945220 |
| 04:06.55 | Notify | 03GCI: Harmanpreet Singh: Create a utility library (LIBBU) API unit test ... for vlb.c - Task Assigned This task has been assigned to Arjun Govindjee. You have 48 hours to complete this task, good luck! http://www.google-melange.com/gci/task/view/google/gci2012/8036205 |
| 04:52.28 | Notify | 03GCI: gcking: Compile with -Wwrite-strings, fix warnings that ensue - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/8090205 |
| 04:57.21 | Notify | 03GCI: Arjun Govindjee: Create a utility library (LIBBU) API unit test ... for vlb.c - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/8036205 |
| 05:06.39 | Notify | 03GCI: gcking: Compile with -Wwrite-strings, fix warnings that ensue - Just finished my work Can I reclaim the task and upload my work? http://www.google-melange.com/gci/task/view/google/gci2012/8090205 |
| 05:17.58 | Notify | 03GCI: Sean: Create an artistic screenshot - Task Closed Congratulations, this task has been completed successfully. http://www.google-melange.com/gci/task/view/google/gci2012/8025213 |
| 05:20.50 | Notify | 03GCI: Sean: Create a utility library (LIBBU) API unit test ... for vlb.c - Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once you re-submit your work. http://www.google-melange.com/gci/task/view/google/gci2012/8036205 |
| 05:32.11 | Notify | 03GCI: Sean: Create a utility library (LIBBU) API unit test ... for vlb.c - looks good Only noticed a few issues on quick inspection: You should be using bu_malloc() and bu_free() instead of malloc() and free() directly. See our HACKING file for a list of functions that are replaced by our libbu versions for portability. The open... http://www.google-melange.com/gci/task/view/google/gci2012/8036205 |
| 05:40.39 | Notify | 03GCI: Sean: Create a numerics library (LIBBN) API unit test ... for vert_tree.c - few issues The patch looks good, but I did notice a few issues: file header (first line) does not match the actual file name. should use BN_TOL_DIST instead of the hard-coded 0.005 constant unless there's a paricular reason. if there is a reason, that should... http://www.google-melange.com/gci/task/view/google/gci2012/7994229 |
| 05:40.44 | Notify | 03GCI: Sean: Create a numerics library (LIBBN) API unit test ... for vert_tree.c - Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once you re-submit your... http://www.google-melange.com/gci/task/view/google/gci2012/7994229 |
| 05:40.49 | Notify | 03GCI: Sean: Create a numerics library (LIBBN) API unit test ... for vert_tree.c - Deadline extended The deadline of the task has been extended with 2 days and 0 hours. http://www.google-melange.com/gci/task/view/google/gci2012/7994229 |
| 05:50.48 | Notify | 03GCI: Harmanpreet Singh: Compile with -Wwrite-strings, fix warnings that ensue - Task Assigned This task has been assigned to gcking. You have 48 hours to complete this task, good luck! http://www.google-melange.com/gci/task/view/google/gci2012/8090205 |
| 05:51.08 | Notify | 03GCI: Sean: Calculate plate-mode triangle mesh (BOT) surface areas - now that's a patch Very nice work Johannes. We'll likely have a follow-on task to enable this new function and properly test it, but the implementation looks pretty good now. We'll be sure to credit you in our authorship notes on this one. I only noticed a couple issues,... http://www.google-melange.com/gci/task/view/google/gci2012/8088204 |
| 05:51.13 | Notify | 03GCI: Sean: Calculate plate-mode triangle mesh (BOT) surface areas - Task Closed Congratulations, this task has been completed successfully. http://www.google-melange.com/gci/task/view/google/gci2012/8088204 |
| 05:52.39 | Notify | 03GCI: Harmanpreet Singh: Compile with -Wwrite-strings, fix warnings that ensue - Yes The task has been reassigned to you and you can now upload your work for review. Good luck..!! http://www.google-melange.com/gci/task/view/google/gci2012/8090205 |
| 05:58.16 | Notify | 03GCI: Sean: Web interface (AJAX?) to MGED - Yep What you asked sounds correct. Should be fun! :) http://www.google-melange.com/gci/task/view/google/gci2012/7993224 |
| 05:59.06 | Notify | 03GCI: Sean: Find and Fix 5 spelling mistakes in at least 40 different files (#2) - Deadline extended The deadline of the task has been extended with 1 days and 0 hours. http://www.google-melange.com/gci/task/view/google/gci2012/8093205 |
| 05:59.31 | Notify | 03GCI: Sean: Find and Fix 5 spelling mistakes in at least 40 different files (#2) - patch format Be sure to submit your changes in proper single patch file format. See http://brlcad.org/wiki/Patches for help. http://www.google-melange.com/gci/task/view/google/gci2012/8093205 |
| 06:01.50 | *** join/#brlcad EricPoehlsen (~Eric@dslb-084-056-089-136.pools.arcor-ip.net) | |
| 06:04.24 | Notify | 03GCI: Sean: Find and Fix 10 spelling mistakes in at least 10 different files (#2) - welcome to reclaim Amit, you're welcome to reclaim the task and we'll help you learn how to make a patch so you can get credit for your work. Making patches are a fundamental skill that can be confusing at first, but is really very simple. If you need... http://www.google-melange.com/gci/task/view/google/gci2012/8103205 |
| 06:11.36 | Notify | 03GCI: Sean: Design a prototype CAD GUI layout (#3) - welcome to reclaim Nikita, you're welcome and encouraged to reclaim the task (effectively restarting the clock). You are working on improving our usability and helping us design our next-generation user interface. You don't need to be familiar with MGED or Archer specifically, or even CAD... http://www.google-melange.com/gci/task/view/google/gci2012/8136209 |
| 08:11.03 | Notify | 03GCI: Melange: Crash our raytracer application reliably - Initial Deadline passed Melange has detected that the initial deadline has passed and it has set the task status to ActionNeeded. The student has 24 hours to submit the work before the task is reopened and sent back to the pool for other students to claim. http://www.google-melange.com/gci/task/view/google/gci2012/8018211 |
| 08:23.32 | Notify | 03GCI: Arjun Govindjee: Create a utility library (LIBBU) API unit test ... for vlb.c - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/8036205 |
| 08:25.19 | Notify | 03GCI: Arjun Govindjee: Create a utility library (LIBBU) API unit test ... for vlb.c - HACKING I read the whole HACKING file and I noticed a few other things I could fix in my code, so I fixed those too. Hopefully in the future I will be more successful at doing things right the first time. http://www.google-melange.com/gci/task/view/google/gci2012/8036205 |
| 09:03.42 | *** join/#brlcad luca79 (~luca@net-37-116-116-59.cust.dsl.vodafone.it) | |
| 11:22.14 | *** join/#brlcad d_rossberg (~rossberg@BZ.BZFLAG.BZ) | |
| 11:58.42 | Notify | 03GCI: Alexandur Osenov: Compile BRL-CAD using Dev-C++ - ok but after i generated it with cmake whats next? For example in the docs its described that if you generate it with MVS you`ll get a project file and so on.. So i am expecting to get the same for Dev-c++.. http://www.google-melange.com/gci/task/view/google/gci2012/7945220 |
| 12:29.41 | Notify | 03BRL-CAD Wiki:BufordjqbezxplgiGibes * 4851 /wiki/Consider_Doing_A_Cleanse_Estate_Planning: New page: This is precisely why exactly it is important to think that about these things before the golden years. When a Town files a property tax lien while combating your property, it takes top pr... |
| 12:31.02 | Notify | 03BRL-CAD Wiki:Erik * 0 /wiki/Special:Log/block: blocked [[User:BufordjqbezxplgiGibes]] with an expiry time of infinite (account creation disabled): Spamming links to external sites |
| 12:31.12 | Notify | 03BRL-CAD Wiki:Erik * 0 /wiki/Special:Log/delete: deleted "[[Consider Doing A Cleanse Estate Planning]]": content was: 'This is precisely why exactly it is important to think that about these things before the golden years. When a Town files a property tax lien while co...' (and the only contributor was '[[Special:Contributions/BufordjqbezxplgiGibes|BufordjqbezxplgiGibes]]') |
| 12:43.58 | *** join/#brlcad luca79 (~luca@net-37-116-116-59.cust.dsl.vodafone.it) | |
| 13:00.14 | *** join/#brlcad deep_inder_singh (~chatzilla@117.207.157.141) | |
| 13:01.16 | deep_inder_singh | I have claimed a task to find and fix 20 spelling mstakes in atleast 5 different files. I am currently on windows computer. I just want to know that how I can download the latest source of BRL-CAD on my computer. |
| 13:09.06 | caen23 | install tortoise svn, open command prompt and run the 'svn co' command here http://brlcad.org/wiki/Compiling |
| 13:09.48 | Notify | 03GCI: Aaron Keesing: Add a primitive surface area function ... for right hyperbolic cylinders (RHC) - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/7982218 |
| 13:27.15 | Notify | 03GCI: Daniel Rossberg: Add a primitive surface area function ... for right hyperbolic cylinders (RHC) - Task Assigned This task has been assigned to Aaron Keesing. You have 72 hours to complete this task, good luck! http://www.google-melange.com/gci/task/view/google/gci2012/7982218 |
| 13:27.38 | *** join/#brlcad EricPoehlsen (~Eric@ip-109-46-2-35.web.vodafone.de) | |
| 14:06.36 | Notify | 03GCI: Daniel Rossberg: Create a utility library (LIBBU) API unit test ... for vlb.c - Your VLB_BLOCK_SIZE is fragile At the moment it's the same as in vlb.c but you can't be sure that this is true in the future too. Any idea how to solve this? (Maybe with a bu_vlb_capacity() function?) And why isn't one memset sufficient (line 73 & 74)? http://www.google-melange.com/gci/task/view/google/gci2012/8036205 |
| 14:06.51 | Notify | 03GCI: Daniel Rossberg: Create a utility library (LIBBU) API unit test ... for vlb.c - Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once you re-submit your... http://www.google-melange.com/gci/task/view/google/gci2012/8036205 |
| 14:42.41 | ``Erik | deep_inder_singh: 'tortoise' has svn tools for windows |
| 14:43.03 | ``Erik | http://tortoisesvn.net/ |
| 14:45.22 | *** join/#brlcad Skriptkid (~Skriptkid@117.202.103.250) | |
| 14:52.02 | *** join/#brlcad mayankmadan (~mayankmad@115.240.43.116) | |
| 14:57.16 | Notify | 03GCI: gcking: Compile with -Wwrite-strings, fix warnings that ensue - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/8090205 |
| 15:04.33 | *** join/#brlcad deep_inder_singh (~chatzilla@117.207.157.141) | |
| 15:08.21 | Notify | 03GCI: Osaze: Create a technical screenshot - Fixed Hello Sean! I managed to render the geometry! I found out that there was a directory called /Default in the database that was causing the problem and just deleted it. http://www.google-melange.com/gci/task/view/google/gci2012/8022221 |
| 15:08.35 | *** part/#brlcad mayankmadan (~mayankmad@115.240.43.116) | |
| 15:08.51 | Notify | 03GCI: Osaze: Create a technical screenshot - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/8022221 |
| 15:26.11 | *** join/#brlcad Al_Da_Best (Al_Da_Best@5e0efe76.bb.sky.com) | |
| 15:35.19 | *** join/#brlcad Silvrous (4f704459@gateway/web/freenode/ip.79.112.68.89) | |
| 15:36.14 | Silvrous | brlcad: What did you mean by "make sure ac>val when you access av[]" ? |
| 15:43.53 | d_rossberg | Silvrous: what happens when you are running your test without any command line parameter? |
| 15:45.44 | Silvrous | you mean "make test"? It runs, no exceptions or errors. |
| 15:49.14 | d_rossberg | no, i mean tester_bn_vert_tree |
| 15:50.07 | d_rossberg | or "add_test(bn_vert_tree_null tester_bn_vert_tree)" |
| 15:50.44 | Notify | 03GCI: Melange: Modify IRC notifier output - Task Reopened Melange has detected that the final deadline has passed and it has reopened the task. http://www.google-melange.com/gci/task/view/google/gci2012/7979224 |
| 15:51.45 | Notify | 03GCI: Melange: Crash our raytracer application reliably - Task Reopened Melange has detected that the final deadline has passed and it has reopened the task. http://www.google-melange.com/gci/task/view/google/gci2012/8018211 |
| 15:55.00 | Silvrous | so the executable file of the test? |
| 15:59.08 | d_rossberg | yes, the test program you wrote in bn_vert_tree.c |
| 16:01.18 | Silvrous | i haven't run it like that, let me reboot to linux to see. |
| 16:11.29 | *** join/#brlcad Silvrous (4f704459@gateway/web/freenode/ip.79.112.68.89) | |
| 16:12.21 | Silvrous | It gives a segmentation fault, but other tests also do |
| 16:12.43 | Silvrous | tester_bn_list for instance |
| 16:26.40 | Notify | 03GCI: Thilo: Find and Fix 10 spelling mistakes in at least 10 different files (#2) - IRC Hi sean, Do you have an IRC chat? http://www.google-melange.com/gci/task/view/google/gci2012/8103205 |
| 16:36.53 | ``Erik | Silvrous: if you try to access past the end of the array, you'll risk segfaults, page faults or undefined data... |
| 16:37.52 | ``Erik | ac tells you the length of the av array, so'z don't reference av with a val > ac |
| 16:37.56 | *** join/#brlcad Skriptkid (~Skriptkid@117.202.103.250) | |
| 16:41.16 | Silvrous | right, so I need to check if ac is >=3. Should I do it with bu_bomb? |
| 16:41.26 | Notify | 03GCI: Thilo: Find and Fix 10 spelling mistakes in at least 10 different files (#2) - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/8103205 |
| 16:42.51 | Silvrous | as in, if (ac < 3 ) bu_bomb(...) |
| 16:43.32 | ``Erik | no, bu_bomb is for seriously bad stuff, normal behavior is to display a help message and return EXIT_FAILURE; |
| 16:45.18 | *** join/#brlcad EricPoehlsen (~Eric@dslb-084-056-089-136.pools.arcor-ip.net) | |
| 16:47.01 | Silvrous | With printf, right? Also another thing, apparently the header name is incorrect, but every test I've seen aside from a couple in libbn uses the format I've used |
| 16:48.59 | Notify | 03GCI: Skriptkid: Web interface (AJAX?) to MGED - exec? Okay, I'm thinking of using the 'exec' or a similar function, which executes terminal commands, in PHP for this, along with AJAX. But mged takes all input when it is being run, and not as command line arguments. Any suggestions or ideas on how commands can be sent to it?(I'm looking... http://www.google-melange.com/gci/task/view/google/gci2012/7993224 |
| 16:49.29 | ``Erik | um, fprintf(stderr, "blah blah", ...); is good, too |
| 16:49.40 | ``Erik | which header name? |
| 16:50.21 | ``Erik | Skriptkid: mged can take input as command line arguments, or you could pipe it... |
| 16:50.33 | ``Erik | $ mged ktank.g tops |
| 16:51.11 | Skriptkid | ''Erik: Could you tell me what piping is? |
| 16:51.41 | ``Erik | echo "command 1; command 2 |
| 16:51.46 | ``Erik | command 3" | mged bah.g |
| 16:52.39 | Skriptkid | OKay. Thanks. :) |
| 16:52.47 | ``Erik | you could do nutty stuff like: mged bah.g tops | sed 's/.*/l &/' | mged bah.g |
| 16:53.59 | Silvrous | First line of the file, which in my case is T E S T _ V E R T _ T R E E . C . Apparently it doesn't match the name of the file, bn_vert_tree.c , but no tests apart from the tri_tri_isect ones use BN in the header. |
| 16:55.21 | ``Erik | Silvrous: the spaced out capitalized name is just supposed to be the name of the file, period... it's a "Hi, my name is" type thing |
| 16:55.50 | Silvrous | Then that means that all the other tests have wrong headers. Should I change them? |
| 16:56.59 | ``Erik | you're confusing me a bit, you mean the file frontmatter, not the header file? |
| 17:00.01 | Silvrous | ``Erik: Sorry for not being clear. This is what Sean said: "file header (first line) does not match the actual file name." And, for instance, /src/libbu/tests/bu_timer.c has the first line " /* T E S T _ T I M E R . C " |
| 17:03.39 | ``Erik | yeah, that one is wrong, they should all match the file names |
| 17:03.55 | Silvrous | OK, I'll change them :) |
| 17:04.06 | ``Erik | there was probably a big file migration where src/libbu/test_timer.c was renamed to src/libbu/tests/bu_timer.c and the file contents weren't updated |
| 17:04.21 | Silvrous | All of them are like that |
| 17:04.30 | ``Erik | I think the tests/ subdir is a fairly new thing |
| 17:05.19 | ``Erik | july 19th by starseeker, I'll go find a good heavy stick to beat on him with for not updating the file contents |
| 17:05.51 | Notify | 03GCI: Thilo: Find and Fix 10 spelling mistakes in at least 10 different files (#2) - Claim Removed The claim on this task has been removed, someone else can claim it now. http://www.google-melange.com/gci/task/view/google/gci2012/8103205 |
| 17:05.52 | caen23 | if you go inside a tests/ dir and run `head -1 *` you can see which do not match |
| 17:06.01 | caen23 | in libbu it's about half |
| 17:09.52 | Silvrous | I'll put the namechanges in the task patch |
| 17:10.46 | ``Erik | there might be centering space changes, too... lemme whack it with the script |
| 17:11.31 | Silvrous | ah ok then |
| 17:12.30 | Silvrous | caen23: yeah, just the bitv ones match |
| 17:12.32 | ``Erik | bleh, the script isn't as magic as I'd hoped... it's brlcad/sh/header.sh if you want to play with it some to see if it does things differently from your mods |
| 17:16.45 | Silvrous | my previous test tasks used the same wrong name header... |
| 17:16.56 | Silvrous | <PROTECTED> |
| 17:17.03 | caen23 | ``Erik: do you happen to know if a latex2pdf converter comes with the standard latex package? |
| 17:20.14 | ``Erik | I don't believe it does... I usually use pdflatex, myself |
| 17:22.17 | caen23 | as in… this one? http://www.tug.org/applications/pdftex/ |
| 17:22.19 | ``Erik | but I'm a bit old school, I built a makefile like this http://elfga.com/~erik/latex/Makefile 15 years ago and just re-use it ... |
| 17:23.16 | ``Erik | huh, pdflatex comes in teTeX |
| 17:24.15 | ``Erik | http://www.tug.org/tetex/ |
| 17:24.53 | caen23 | seems abandoned? |
| 17:27.13 | ``Erik | *shrug* or "done", last update to the freebsd port of it was july of 2012 |
| 17:27.55 | ``Erik | http://www.tug.org/texlive/ |
| 17:30.42 | caen23 | i'm on a mac and mactex is heavy (2 gb), i was hoping i could get away with only building pdflatex :( |
| 17:34.38 | Notify | 03GCI: Skriptkid: Web interface (AJAX?) to MGED - First Step A very basic CLI-Ajax interface I've managed to come up with. No bells and whistles or niceties. So the next thing is to figure out the mged-PHP interaction. http://www.google-melange.com/gci/task/view/google/gci2012/7993224 |
| 17:35.08 | Notify | 03GCI: Skriptkid: Web interface (AJAX?) to MGED - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/7993224 |
| 17:35.26 | ``Erik | if you have an account on a machine with it, you could always do it remote... if it's not a big doc, I can do it on one of mine |
| 17:35.45 | Notify | 03BRL-CAD:carlmoore * 54128 brlcad/trunk/src/librt/primitives/brep/brep.cpp: remove trailing blanks/tabs |
| 17:37.26 | caen23 | i'm trying to build pdf docs for buildbot, and it requires pdflatex |
| 17:47.40 | Notify | 03GCI: Sean: Compile BRL-CAD using Dev-C++ - That's what you're supposed to figure out Alexander, that's what this task has you figure out. What is next? You tell us. Several other people have attempted this task and gotten farther, so you should review the entire prior discussion here and look at all the previous attempts to see how it... http://www.google-melange.com/gci/task/view/google/gci2012/7945220 |
| 17:49.41 | Notify | 03GCI: Sean: Create a technical screenshot - Task Closed Congratulations, this task has been completed successfully. http://www.google-melange.com/gci/task/view/google/gci2012/8022221 |
| 17:50.36 | Notify | 03GCI: Sean: Create a technical screenshot - looks a lot better The latest set looks a whole lot better and will make a nice addition. Do you have a link to the dragon model that you imported? We need to be able to cite and credit them for the model. http://www.google-melange.com/gci/task/view/google/gci2012/8022221 |
| 17:51.51 | *** join/#brlcad Skriptkid_ (~Skriptkid@117.202.103.250) | |
| 17:58.21 | Notify | 03GCI: Sean: Web interface (AJAX?) to MGED - mged mged can take commands in a whole variety of ways including one-at-a-time but it's best to establish a back-end "session" with mged so that you don't have to keep re-invoking it. That way you can stream back responses/output too for commands like "rt" that take a while. http://www.google-melange.com/gci/task/view/google/gci2012/7993224 |
| 17:58.25 | Notify | 03GCI: Sean: Web interface (AJAX?) to MGED - Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once you re-submit your work. http://www.google-melange.com/gci/task/view/google/gci2012/7993224 |
| 18:10.22 | Silvrous | I think I may have found a bug in Add_vert_and_norm() |
| 18:12.05 | Silvrous | I only saw today that a part of my tests fail when it is given an already existing vertex, it can't find it and makes a new one |
| 18:13.17 | Silvrous | If the existing vertex has index 0 it works, if it's 1 it fails. |
| 18:14.11 | *** join/#brlcad Skriptkid (~Skriptkid@117.202.103.250) | |
| 18:33.09 | *** join/#brlcad Skriptkid (~Skriptkid@117.202.103.250) | |
| 18:45.36 | *** join/#brlcad EricPoehlsen (~Eric@dslb-084-056-089-136.pools.arcor-ip.net) | |
| 18:55.24 | Notify | 03GCI: Osaze: Create a technical screenshot - Thanks! Thanks for the congrats! Here is the link to the dragon model that I imported (http://grabcad.com/library/dragon-charm) http://www.google-melange.com/gci/task/view/google/gci2012/8022221 |
| 20:28.40 | *** join/#brlcad KimK (~Kim__@wsip-184-176-200-171.ks.ks.cox.net) | |
| 21:41.47 | Notify | 03BRL-CAD:starseeker * 54129 (brlcad/trunk/src/librt/test_botpatches.cpp brlcad/trunk/src/librt/test_subdivision.cpp): Fix compilation with newer opennurbs |
| 21:47.58 | Notify | 03GCI: BrendenD15: Design a commercial CAD comparison diagram - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/8141203 |
| 22:16.13 | Notify | 03BRL-CAD:starseeker * 54130 brlcad/trunk/CMakeLists.txt: Windows uses neither X11 nor Aqua, but still needs OpenGL and enables Tk. |
| 22:17.27 | ``Erik | huh, "trackbar.pl" for irssi, cool beans |
| 22:17.54 | starseeker | ``Erik: sorry about not updating the filenames |
| 22:18.28 | starseeker | out of curiosity - why do we use that particular convention? |
| 22:18.40 | ``Erik | doesn't bother me, I was just being theatrical :D I think silvrous fixed 'em all |
| 22:19.14 | starseeker | heh |
| 22:19.19 | ``Erik | um, I d'no, the spaced and capped style always bothered me... putting the filename in might be a relic from back when hard drives were slightly less reliable and you'd frequently get files in your lost+found/ dirs |
| 22:19.30 | starseeker | is often guilty of forgetting to update that name |
| 22:19.44 | starseeker | winces |
| 22:19.51 | starseeker | yeah, that would suck |
| 22:20.08 | ``Erik | the styling of the filename is probably an artifact of old army style, when all forms were in caps by regulation, etc |
| 22:21.08 | ``Erik | puts on his drill sergeant voice |
| 22:21.35 | starseeker | sees if turning OpenGL and Tk on helped the Windows build... |
| 22:21.39 | ``Erik | LOWER CA... O.o ? LOWER CASE? THIS IS THE GODDAMN ARMY, SON, WE DON'T DO ANYTHING LOWER, NOW HOLD THAT SHIFT KEY DOWN AND ENTER THE DATA! |
| 22:21.50 | starseeker | heh |
| 22:22.01 | starseeker | like the early lisp days |
| 22:22.06 | starseeker | or, excuse me, LISP |
| 22:22.35 | ``Erik | I'm not sure early hollerith readers had the bandwidth to have two case sets |
| 22:22.54 | starseeker | point |
| 22:23.31 | ``Erik | so, yeh, trackbar.pl... if you use irssi, I recommend checking it out |
| 22:24.05 | ``Erik | puts a horizontal mark at your last activity, so you can quickly scroll up to the last place you read after you're afk |
| 22:24.41 | ``Erik | <-- was looking for some script fu to do /mark and put a horizontal mark, thsi one does the updating automagically :D |
| 23:43.25 | *** join/#brlcad maths22_ (~Thunderbi@c-50-141-159-74.hsd1.il.comcast.net) | |
| 23:43.32 | *** part/#brlcad maths22_ (~Thunderbi@c-50-141-159-74.hsd1.il.comcast.net) | |