| 02:43.29 | *** part/#brlcad milamber (~devlin@d118-75-244-176.try.wideopenwest.com) | |
| 03:06.18 | tofu | starseeker: the build was failing just 'now' before I'd applied those changes, no -std flag |
| 03:07.51 | tofu | I saw the errors and thought something else was wrong myself, with the comments clearly in preprocessor protected sections |
| 03:08.42 | tofu | it took me a while of hunting forsomething else before I remembered that detail |
| 03:09.22 | tofu | so yeah, you weren't nuts .. you just didn't dig deep enough to realize it ;) |
| 03:11.21 | brlcad | and neither did I at the time, so you probably did seem nuts ;) |
| 03:38.15 | Notify | 03BRL-CAD Wiki:Ronshannon * 0 /wiki/User:Ronshannon: |
| 03:57.26 | Notify | 03BRL-CAD Wiki:Pat Griffin * 0 /wiki/User:Pat_Griffin: |
| 08:06.39 | *** join/#brlcad brlcad (~sean@66-118-151-70.static.sagonet.net) | |
| 08:07.56 | *** join/#brlcad starseeker (~starseeke@66-118-151-70.static.sagonet.net) | |
| 08:08.06 | *** join/#brlcad n_reed (~molto_cre@66-118-151-70.static.sagonet.net) | |
| 08:08.23 | *** join/#brlcad maths22 (~gcimaths@66-118-151-70.static.sagonet.net) | |
| 08:11.22 | *** join/#brlcad d_rossberg (~rossberg@66-118-151-70.static.sagonet.net) | |
| 09:47.27 | *** join/#brlcad merzo (~merzo@67-73-132-95.pool.ukrtel.net) | |
| 10:14.34 | *** join/#brlcad KimK (~Kim__@wsip-184-176-200-171.ks.ks.cox.net) | |
| 12:03.34 | *** join/#brlcad Notify (~notify@66-118-151-70.static.sagonet.net) | |
| 12:51.37 | *** join/#brlcad crdueck (~cdk@24.212.219.10) | |
| 13:35.08 | Notify | 03BRL-CAD:phoenixyjll * 55635 (brlcad/trunk/include/brep.h brlcad/trunk/src/libbrep/intersect.cpp): Begin to add P/P, P/C and P/S support. Implement ON_PX_EVENT for reporting the intersections. |
| 13:43.55 | Notify | 03BRL-CAD:phoenixyjll * 55636 brlcad/trunk/include/brep.h: remove the comma at end of enumerator list. |
| 13:48.58 | Notify | 03BRL-CAD:phoenixyjll * 55637 brlcad/trunk/src/libbrep/intersect.cpp: remove the unused variable names to quell compiler warnings. |
| 13:57.57 | Notify | 03BRL-CAD:phoenixyjll * 55638 (brlcad/trunk/src/libbrep/CMakeLists.txt brlcad/trunk/src/libbrep/Makefile.am brlcad/trunk/src/libbrep/px_event.cpp): Oops, forget to add px_event.cpp to the CMakeList and Makefile. |
| 13:58.51 | Notify | 03BRL-CAD Wiki:Phoenix * 5357 /wiki/User:Phoenix/GSoc2013/Reports: /* Community bonding */ |
| 15:35.52 | brlcad | waves |
| 16:29.40 | ``Erik | how goeth 7.24.0 ? |
| 16:45.08 | ``Erik | heh, nutty.. a movie review on twitter rot13'd to hide spoilers |
| 16:53.25 | *** join/#brlcad avneet (~avneet@202.164.53.122) | |
| 17:03.48 | brlcad | spoilage within tweet limits? can't be that big a spoil |
| 17:04.25 | brlcad | I guess that's enought room to say "Darth Vader is Luke's father" |
| 17:08.32 | Notify | 03BRL-CAD:brlcad * 55639 brlcad/trunk/src/librt/primitives/brep/brep.cpp: remove unused var |
| 17:28.29 | ``Erik | it was a terse harsh 4 tweet review... @zedshaw |
| 18:10.25 | Notify | 03BRL-CAD:carlmoore * 55640 brlcad/trunk/src/liboptical/sh_treetherm.c: provide solid_name in fixing warning messages |
| 18:24.02 | *** join/#brlcad vladbogo (~vlad@188.25.238.175) | |
| 18:25.12 | vladbogo | ls |
| 18:25.31 | vladbogo | hi all sorry about that :) |
| 18:52.31 | *** join/#brlcad vladbogo (~vlad@188.25.101.47) | |
| 19:07.16 | Notify | 03BRL-CAD:carlmoore * 55641 brlcad/trunk/src/util/dsp_add.c: clean up the handling of h and ? as help |
| 19:07.33 | Notify | 03BRL-CAD:brlcad * 55642 brlcad/trunk/include/brep.h: more comment conversion for the new PP PC functions // -> /* */ and eliminate tons of trailing ws. |
| 19:17.12 | *** join/#brlcad Ch3ck (29cac69d@gateway/web/freenode/ip.41.202.198.157) | |
| 19:18.10 | Ch3ck | Hi everyone i just wish to know when i am to submit my design document on the wiki pages.. |
| 19:24.46 | Notify | 03BRL-CAD Wiki:77.220.1.218 * 5358 /wiki/User:Izak: |
| 19:30.28 | *** join/#brlcad cstirk (~quassel@c-71-56-216-45.hsd1.co.comcast.net) | |
| 19:43.01 | *** join/#brlcad mpictor (~mark@99-93-104-202.lightspeed.iplsin.sbcglobal.net) | |
| 19:51.23 | Notify | 03BRL-CAD Wiki:77.220.1.218 * 5359 /wiki/User:Izak: /* PROJECT SUMMARY */ |
| 19:52.03 | brlcad | vladbogo: about what? |
| 19:55.43 | vladbogo | brlcad: I accidentally sent a "ls" message |
| 19:59.10 | brlcad | starseeker: trying to figure out some cmakeness and could use some pointers |
| 19:59.13 | brlcad | vladbogo: ah, no worries |
| 20:07.02 | mpictor | brlcad: when you guys move to github, are you planning to make perplex/re2c/lemon a separate project? |
| 20:07.47 | brlcad | mpictor: we're not moving brl-cad to github anytime soon |
| 20:08.01 | mpictor | oh ok |
| 20:08.15 | mpictor | ``Eric said something, but I guess I misunderstood |
| 20:08.48 | brlcad | when he said we were "moving to github" a couple weeks ago, he meant we'll be converting our src/other/step sources to those in stepcode on github |
| 20:09.02 | mpictor | oic |
| 20:09.34 | brlcad | we're in the middle of preparing a major release, so it's just on hold until after |
| 20:09.51 | brlcad | erik might have mentioned the git svn mirror he set up |
| 20:10.35 | brlcad | http://brlcad.org/brlcad.git |
| 20:10.40 | mpictor | yea he did |
| 20:11.43 | mpictor | I was thinking of putting perplex/lemon/re2c up by themselves so it would be easier to grab them to rebuild the generated sources |
| 20:12.11 | mpictor | I think I found a regression in the lemon-based parser, where it isn't setting initializers |
| 20:12.34 | brlcad | the intent has been for those to be their own project, since they are so generally useful |
| 20:14.28 | brlcad | i think nick just sorta ran out of steam making it be its own thing once he got it all working, but he did talk about setting something up |
| 20:14.44 | mpictor | have you spoken with kesha recently? I haven't in the last several days |
| 20:14.50 | mpictor | oh ok |
| 20:15.33 | mpictor | is thinking of putting it on github as "baffled-citrus" |
| 20:16.04 | mpictor | (as opposed to perplexed lemon) |
| 20:18.39 | n_reed | laughs uncontrollably at baffled-citrus |
| 20:22.17 | mpictor | for a minute, I was worried that I was the only one who saw humor in that :) |
| 20:32.33 | mpictor | n_reed: not a regression after all |
| 20:34.20 | mpictor | now I need to figure out why attr initializers aren't being set by either parser |
| 20:45.57 | *** join/#brlcad Izak (4ddc01da@gateway/web/freenode/ip.77.220.1.218) | |
| 20:46.50 | Guest67778 | ``Erik: Please can I have your e-mail address ? |
| 20:54.30 | ``Erik | izak: you already have it and sent email to it... (It didn't seem like a response was necessary, is there something you need help with?) |
| 20:58.52 | brlcad | izak, Guest67778: you should download a real IRC client -- the web interface is not suitable for gsoc |
| 20:59.18 | Guest67778 | Thanks. Can you point me to any relevant books on constructive solid geometry which woull help with the project ? |
| 21:00.12 | Guest67778 | I have the xchat client but my I have connection problems now. That is why I am using this web interface |
| 21:00.31 | brlcad | what sort of connection problems? |
| 21:00.58 | brlcad | we're going to need to talk with you effectively for GSoC, so hopefully this can be sorted out |
| 21:01.35 | Guest67778 | The lines are slow right now due to the extreme rains |
| 21:02.10 | Guest67778 | Yes. I am working on getting more relaible and faster connection |
| 21:02.17 | brlcad | so how does using a web connection speed anything up? |
| 21:02.22 | brlcad | it's actually more overhead |
| 21:04.54 | Guest67778 | Do you think my Aggreement to participation requirements is adequate? |
| 21:05.37 | brlcad | how does using a web connection speed anything up? |
| 21:07.49 | Guest67778 | I intend to get a personal web connection with access to better speeds. The overheads in the cyber cafe will be eliminated |
| 21:08.14 | brlcad | the requirements were spelled out in detail ... if you did what the e-mails said, then that will be adequate otherwise it will not |
| 21:08.17 | brlcad | at a glance, you look fine |
| 21:08.34 | brlcad | Guest67778: so you're dodging my questions, that's really not appreciated |
| 21:08.39 | brlcad | you don't need to dodge, just answer honestly |
| 21:09.07 | brlcad | "I'm in a cyber cafe and they don't let me install xchat" sounds like it might be closer to the truth than "it's too slow" |
| 21:09.42 | brlcad | or, "it's too slow at home where I have xchat, but right now I'm in an internet cafe" |
| 21:10.08 | brlcad | I can't guess your situation, you have to state it clearly |
| 21:11.08 | Guest67778 | I am at a cyber cafe and the internet lines are used by a dozen people making the connection slower |
| 21:12.25 | Guest67778 | I intend to get a personal internet connection which I will use alone. I think this will be faster and I 'll use xchat |
| 21:14.56 | brlcad | Guest67778: so are you on your own computer? how're you going to write code? |
| 21:16.50 | Guest67778 | I am on my computer. I intend to write code in my closet not at the cyber cafe. I intend to get connected to the internet from home |
| 21:16.57 | brlcad | so then the question comes full circle |
| 21:17.01 | brlcad | I don't understand what connection speed has to do with using xchat vs a web interface if it's your computer... |
| 21:17.43 | brlcad | so it'll be slow in xchat and slow(er) in a browser ... is there some other problem? |
| 21:18.20 | Guest67778 | When I open xchat it keeps showing n |
| 21:19.15 | Guest67778 | messages like Disconnection from peers . I think this will be inappropriate to log in and quit |
| 21:20.56 | brlcad | Guest67778: are you familar with screen+irssi? |
| 21:21.40 | Guest67778 | No I am not. What is it? |
| 21:23.13 | brlcad | a way to maintain a persistent connection across local disconnects |
| 21:23.22 | brlcad | do you have access to a server anywhere? |
| 21:23.28 | brlcad | that you can ssh into |
| 21:24.44 | brlcad | Guest67778: what operating system are you using? |
| 21:25.57 | brlcad | Guest67778: and try typing "/nick thisisatest" |
| 21:53.59 | *** join/#brlcad caen23 (~caen23@92.85.92.235) | |
| 23:24.48 | starseeker | brlcad: what's the issue? |
| 23:27.43 | starseeker | (sorry, been away from the machine all day) |