| 02:11.48 | starseeker | sad news |
| 02:44.52 | brlcad | ``Erik: news entry for libpng update |
| 03:46.02 | Notify | 03BRL-CAD:phoenixyjll * 55991 brlcad/trunk/src/libbrep/intersect.cpp: Perform Newton iterations to get more accurate intersection points. |
| 04:04.12 | Notify | 03BRL-CAD:brlcad * 55992 brlcad/trunk/HACKING: new news submission link (old still works too... but they're not in sync) |
| 04:28.16 | Notify | 03BRL-CAD:phoenixyjll * 55993 brlcad/trunk/src/librt/primitives/brep/brep_debug.cpp: Plot the 3D curves at last, in case that it may be blocked by the 2D curves. |
| 06:01.11 | Notify | 03BRL-CAD:phoenixyjll * 55994 brlcad/trunk/src/libbrep/intersect.cpp: If there are points on the line, there should be an intersection, and the following code will work - don't need to calculate points_on_line, which will cause some cases to fail. |
| 06:05.13 | Notify | 03BRL-CAD:phoenixyjll * 55995 brlcad/trunk/src/libbrep/intersect.cpp: Display number of curve segments and number of single points. |
| 06:09.34 | Notify | 03BRL-CAD:phoenixyjll * 55996 brlcad/trunk/src/librt/primitives/brep/brep_debug.cpp: 2D points should be plotted after evaluation. |
| 06:39.05 | *** join/#brlcad d_rossberg (~rossberg@66-118-151-70.static.sagonet.net) | |
| 06:42.48 | *** join/#brlcad evgeny (~Miranda@109.194.34.184) | |
| 07:07.59 | *** join/#brlcad caen23_ (~caen23@92.81.171.202) | |
| 07:58.46 | *** join/#brlcad caen23 (~caen23@92.81.171.202) | |
| 09:48.37 | *** join/#brlcad n_reed_ (~molto_cre@66-118-151-70.static.sagonet.net) | |
| 10:22.06 | *** join/#brlcad caen23 (~caen23@92.81.171.202) | |
| 10:55.59 | Notify | 03BRL-CAD Wiki:Phoenix * 5645 /wiki/User:Phoenix/GSoc2013/Reports: /* Week 4 */ |
| 10:57.12 | Notify | 03BRL-CAD Wiki:Phoenix * 0 /wiki/File:Rcc_circle.png: |
| 10:59.12 | Notify | 03BRL-CAD Wiki:Phoenix * 5647 /wiki/User:Phoenix/GSoc2013/Reports: /* Test Results */ |
| 11:03.51 | Notify | 03BRL-CAD Wiki:Phoenix * 0 /wiki/File:Rcc_3dcurve.png: |
| 11:04.04 | Notify | 03BRL-CAD Wiki:Phoenix * 5649 /wiki/User:Phoenix/GSoc2013/Reports: /* Test Results */ |
| 11:06.27 | Notify | 03BRL-CAD Wiki:Phoenix * 0 /wiki/File:Rcc_point.png: |
| 11:08.55 | Notify | 03BRL-CAD Wiki:Phoenix * 5651 /wiki/User:Phoenix/GSoc2013/Reports: /* Test Results */ |
| 11:09.46 | Notify | 03BRL-CAD Wiki:Phoenix * 5652 /wiki/User:Phoenix/GSoc2013/Reports: /* Test Results */ |
| 11:15.37 | ``Erik | <- a bit confused about this news entry vs notify thing, the libpng 1.6.2 news line was part of the same commit that the upgrade itself was on, 55986... the only other one since about a month ago was brlcad's... where did notify fail? |
| 11:16.22 | Notify | 03BRL-CAD Wiki:Phoenix * 0 /wiki/File:Rcc_ortho_3d.png: |
| 11:16.55 | Notify | 03BRL-CAD Wiki:Phoenix * 0 /wiki/File:Rcc_ortho_2d.png: |
| 11:17.26 | Notify | 03BRL-CAD Wiki:Phoenix * 0 /wiki/File:Rcc_ortho_zoom.png: |
| 11:22.20 | Notify | 03BRL-CAD Wiki:Phoenix * 5656 /wiki/User:Phoenix/GSoc2013/Reports: /* Test Results */ |
| 11:22.53 | Notify | 03BRL-CAD Wiki:Phoenix * 5657 /wiki/User:Phoenix/GSoc2013/Reports: /* Test Results */ |
| 11:23.29 | Notify | 03BRL-CAD Wiki:Phoenix * 5658 /wiki/User:Phoenix/GSoc2013/Reports: /* Test Results */ |
| 11:58.41 | *** join/#brlcad evgeny (~Miranda@109.194.34.184) | |
| 13:26.14 | *** join/#brlcad jordisayol (~jordisayo@unaffiliated/jordisayol) | |
| 13:31.28 | *** join/#brlcad badtab (tomboy@gateway/shell/blinkenshell.org/x-yfeheeedlgzxjkrs) | |
| 13:31.49 | *** join/#brlcad mpictor_ (~mpictor_@140.sub-174-241-64.myvzw.com) | |
| 13:32.05 | *** join/#brlcad hickoryknoll (~hickorykn@66.118.151.70) | |
| 13:32.22 | *** join/#brlcad evgeny (~Miranda@109.194.34.184) | |
| 13:35.51 | jordisayol | I see that Archer changed its state from pre-alpha to alpha. Can I make it the default app for Linux mime types. The current app is mged |
| 13:45.04 | *** join/#brlcad evgeny (~Miranda@109.194.34.184) | |
| 13:45.35 | *** part/#brlcad evgeny (~Miranda@109.194.34.184) | |
| 13:46.59 | *** join/#brlcad badtab (tomboy@gateway/shell/blinkenshell.org/x-xocykplhfjbmiusx) | |
| 14:04.06 | Notify | 03BRL-CAD Wiki:Tbrowder * 5659 /wiki/DSP: /* A practical example [UNDER CONSTRUCTION] */ |
| 14:09.17 | *** join/#brlcad maths22_ (~gcimaths@66-118-151-70.static.sagonet.net) | |
| 14:12.34 | *** join/#brlcad crdueck_ (~cdk@24-212-219-10.cable.teksavvy.com) | |
| 14:14.39 | *** join/#brlcad ChanServ (ChanServ@services.) | |
| 14:14.39 | *** mode/#brlcad [+o ChanServ] by orwell.freenode.net | |
| 14:19.12 | *** join/#brlcad caen23 (~caen23@92.85.88.254) | |
| 14:20.13 | *** join/#brlcad archivist (~archivist@host81-149-189-98.in-addr.btopenworld.com) | |
| 14:22.59 | *** join/#brlcad KimK (~Kim__@wsip-184-176-200-171.ks.ks.cox.net) | |
| 14:47.56 | *** join/#brlcad mpictor (~mpictor_@235.sub-174-225-64.myvzw.com) | |
| 14:48.39 | Notify | 03BRL-CAD:carlmoore * 55997 (brlcad/trunk/src/tclscripts/lib/RtImage.tcl brlcad/trunk/src/tclscripts/rtwizard/lib/PictureTypeD.itcl brlcad/trunk/src/tclscripts/rtwizard/lib/PictureTypeE.itcl): remove trailing blanks/tabs |
| 15:02.21 | *** join/#brlcad evgeny (~Miranda@109.194.34.184) | |
| 15:03.34 | *** join/#brlcad ChanServ (ChanServ@services.) | |
| 15:03.34 | *** mode/#brlcad [+o ChanServ] by orwell.freenode.net | |
| 15:16.35 | *** join/#brlcad Eythor (82d0f702@gateway/web/freenode/ip.130.208.247.2) | |
| 15:17.02 | Eythor | hello |
| 15:18.22 | Eythor | hey is anybody here? |
| 15:57.00 | zero_level | Eythor: Please post your query and wait for someone to reply. |
| 16:01.56 | *** join/#brlcad ChanServ (ChanServ@services.) | |
| 16:01.56 | *** mode/#brlcad [+o ChanServ] by orwell.freenode.net | |
| 16:13.48 | *** join/#brlcad evgeny (~Miranda@77.106.106.192) | |
| 16:30.12 | Eythor | I was wondering about the task of moving comments from .c files to .h files is that still available? |
| 16:30.19 | *** join/#brlcad vladbogo (~vlad@188.25.237.173) | |
| 16:37.50 | *** join/#brlcad ChanServ (ChanServ@services.) | |
| 16:37.51 | *** mode/#brlcad [+o ChanServ] by orwell.freenode.net | |
| 16:47.25 | *** join/#brlcad mpictor_ (~mpictor_@185.sub-174-241-130.myvzw.com) | |
| 16:57.45 | *** join/#brlcad mpictor (~mpictor_@185.sub-174-241-130.myvzw.com) | |
| 17:39.08 | zero_level | Eythor you might want to have a look at this patch http://sourceforge.net/p/brlcad/patches/172/ |
| 17:43.20 | Eythor | ok I see, uhm is there anything else with the same complexity that I can do, that is as easy as i am a newbie? |
| 17:43.59 | *** join/#brlcad ChanServ (ChanServ@services.) | |
| 17:43.59 | *** mode/#brlcad [+o ChanServ] by orwell.freenode.net | |
| 17:54.48 | *** join/#brlcad ChanServ (ChanServ@services.) | |
| 17:54.48 | *** mode/#brlcad [+o ChanServ] by orwell.freenode.net | |
| 17:55.31 | zero_level | Eythor : you might want to look at TODO |
| 18:31.32 | zero_level | hi brlcad |
| 19:20.32 | *** join/#brlcad mpictor_ (~mpictor_@2600:1015:b11f:cc3a:0:49:1835:7f01) | |
| 19:26.13 | *** join/#brlcad mpictor_ (~mpictor_@2600:1015:b11f:cc3a:0:49:1835:7f01) | |
| 19:32.30 | *** join/#brlcad ChanServ (ChanServ@services.) | |
| 19:32.30 | *** mode/#brlcad [+o ChanServ] by orwell.freenode.net | |
| 19:35.41 | *** join/#brlcad avneet (~avneet@202.164.53.122) | |
| 19:36.02 | *** join/#brlcad mpictor (~mpictor_@c-67-177-102-131.hsd1.in.comcast.net) | |
| 19:37.46 | Notify | 03BRL-CAD Wiki:Vladbogolin * 5660 /wiki/User:Vladbogolin/GSoC2013/Logs: |
| 19:43.58 | *** join/#brlcad mpictor (~mpictor_@c-67-177-102-131.hsd1.in.comcast.net) | |
| 19:50.21 | *** join/#brlcad ChanServ (ChanServ@services.) | |
| 19:50.21 | *** mode/#brlcad [+o ChanServ] by orwell.freenode.net | |
| 19:51.01 | *** join/#brlcad hickoryknoll (~hickorykn@66-118-151-70.static.sagonet.net) | |
| 20:03.41 | Notify | 03BRL-CAD Wiki:Izakkayems * 5661 /wiki/User:Izak/GSOC_2013_logs: /* From July 8th to July 13th */ |
| 20:04.54 | Notify | 03BRL-CAD Wiki:NyahCh3ck20 * 5662 /wiki/User:NyahCh3ck20/GSoc2013/Coding_Repor: /* 8 July - 14 July */ |
| 20:11.00 | *** join/#brlcad Izak_ (29cac02f@gateway/web/freenode/ip.41.202.192.47) | |
| 20:24.48 | *** join/#brlcad Eythor (2eb6b809@gateway/web/freenode/ip.46.182.184.9) | |
| 20:26.54 | ``Erik | Eythor: the TODO file is full of possibilities. you could also look at the bugs/feature requests on sourceforge, http://brlcad.org/~sean/ideas.html or just decide where your interests are and discuss them here |
| 20:30.29 | *** join/#brlcad ChanServ (ChanServ@services.) | |
| 20:30.29 | *** mode/#brlcad [+o ChanServ] by orwell.freenode.net | |
| 20:34.55 | Eythor | I've been looking at this site http://brlcad.org/wiki/Deuces and am interested in moving some comments around but I'm not sure if any or all of those tasks are done. Like I said I would like do that and can you tell me where I would send the changes? |
| 20:41.06 | zero_level | Eythor chages are applied by patches. You will fimnd more information here http://brlcad.org/wiki/Patches |
| 20:43.05 | Eythor | Thank you very much :) and sorry for my newbness :) |
| 20:48.51 | *** join/#brlcad tofu_ (~sean@66-118-151-70.static.sagonet.net) | |
| 20:51.15 | *** join/#brlcad ejno_ (~ejno@66-118-151-70.static.sagonet.net) | |
| 20:51.17 | *** join/#brlcad caen23_ (~caen23@92.85.88.254) | |
| 20:54.43 | *** join/#brlcad ChanServ (ChanServ@services.) | |
| 20:54.43 | *** mode/#brlcad [+o ChanServ] by orwell.freenode.net | |
| 21:00.42 | *** join/#brlcad dtidrow_desk (~dtidrow@c-68-84-167-135.hsd1.mi.comcast.net) | |
| 21:09.42 | *** join/#brlcad Don_desk (~dtidrow@c-68-84-167-135.hsd1.mi.comcast.net) | |
| 21:25.30 | *** join/#brlcad mpictor_ (~mpictor_@2601:d:b280:9:cc8d:62c7:12d3:4ab8) | |
| 21:39.49 | *** join/#brlcad mpictor_ (~mpictor_@c-67-177-102-131.hsd1.in.comcast.net) | |
| 22:14.29 | *** join/#brlcad mpictor (~mark@2601:d:b280:9:d63d:7eff:fe2d:2505) | |
| 22:44.22 | *** join/#brlcad Notify (~notify@66-118-151-70.static.sagonet.net) | |
| 22:45.18 | Notify | 03BRL-CAD:carlmoore * 55998 brlcad/trunk/src/fb/fbzoom.c: add run-with-no-arguments, h, ? ; remove old h in favor of s 1024; change 2 defaults from 0 to 1024 |
| 22:47.04 | *** part/#brlcad jordisayol (~jordisayo@unaffiliated/jordisayol) | |
| 23:30.38 | *** join/#brlcad mpictor_ (~mpictor_@2601:d:b280:9:51e:698e:7a7f:e345) | |
| 23:41.12 | *** join/#brlcad crdueck (~cdk@24-212-219-10.cable.teksavvy.com) | |
| 23:57.22 | *** join/#brlcad mpictor_ (~mpictor_@67.177.102.131) | |