| 00:37.29 | starseeker | ``Erik: expired... |
| 00:40.06 | ``Erik | starseeker: http://paste.lisp.org/display/138172 |
| 00:46.21 | starseeker | hrm |
| 00:47.32 | starseeker | ``Erik: are you using Qt4 or Qt5? |
| 00:53.43 | ``Erik | 4, and the -dev stuff was not installed, so the test shouldn't have said to build it :/ |
| 00:53.51 | starseeker | nods |
| 00:54.09 | ``Erik | (this is an i386 ubuntu, fwiw) |
| 00:55.03 | starseeker | did you explicitly enable the QT option? |
| 00:55.29 | starseeker | well, it builds but segfaults here... |
| 00:56.19 | starseeker | will have to try the no-dev install in a vm later |
| 01:10.33 | ``Erik | no, just a clang based build |
| 01:11.37 | ``Erik | http://brlcad.org/~erik/tmp/CMakeCache.txt |
| 01:50.40 | *** join/#brlcad Notify (~notify@66-118-151-70.static.sagonet.net) | |
| 01:57.40 | kanzure | huh, phoenix is around for a few more months of work? |
| 02:01.54 | brlcad | at least two more |
| 02:03.05 | brlcad | he's just about to get started on the holy grail task, boolean eval |
| 02:03.53 | brlcad | that should about close the loop for robust visualization and polygonal conversion of any geometry |
| 02:35.14 | kanzure | cool. |
| 04:49.14 | starseeker | pokes Notify |
| 05:32.07 | *** join/#brlcad caen23_ (~caen23@92.83.185.253) | |
| 05:39.11 | *** join/#brlcad kimz (~AndChat56@14.139.122.114) | |
| 06:00.35 | *** join/#brlcad ``Erik (~erik@pool-173-67-38-235.bltmmd.fios.verizon.net) | |
| 06:49.24 | *** join/#brlcad d_rossberg (~rossberg@66-118-151-70.static.sagonet.net) | |
| 07:04.35 | brlcad | goes walkabout |
| 07:15.40 | *** join/#brlcad kimz (~AndChat56@14.139.122.114) | |
| 08:11.25 | *** join/#brlcad kesha_ (~kesha@14.139.122.114) | |
| 08:28.30 | *** join/#brlcad harmanpr1et (~harman@202.164.53.122) | |
| 08:35.03 | *** join/#brlcad kesha_ (~kesha@14.139.122.114) | |
| 08:48.24 | *** join/#brlcad Ch3ck (~Ch3ck@195.24.220.16) | |
| 08:49.07 | *** join/#brlcad Izak_ (~Izak@195.24.220.16) | |
| 08:51.52 | *** join/#brlcad kesha_ (~kesha@14.139.122.114) | |
| 11:10.13 | *** join/#brlcad Notify (~notify@66-118-151-70.static.sagonet.net) | |
| 11:38.03 | *** join/#brlcad mpictor_ (~mpictor_@2600:1015:b10e:3bdf:0:4b:a505:9101) | |
| 12:10.41 | *** join/#brlcad mpictor_ (~mpictor_@2600:1015:b10e:3bdf:0:4b:a505:9101) | |
| 12:22.32 | Notify | 03BRL-CAD Wiki:195.24.220.16 * 5749 /wiki/User:Izak/GSOC_2013_logs: /* From June 17th to June 21 */ |
| 12:22.34 | Notify | 03BRL-CAD Wiki:IIIzzzaaakkk * 5750 /wiki/User:Izak/GSOC_2013_logs: /* From June 17th to June 21 */ |
| 12:22.36 | Notify | 03BRL-CAD Wiki:IIIzzzaaakkk * 5751 /wiki/User:Izak/GSOC_2013_logs: /* From June 17th to June 21 */ |
| 12:22.38 | Notify | 03BRL-CAD Wiki:IIIzzzaaakkk * 5752 /wiki/User:Izak/GSOC_2013_logs: /* From June 24th to June 29th */ |
| 12:22.40 | Notify | 03BRL-CAD Wiki:NyahCh3ck20 * 0 /wiki/File:Preliminary_tests_on_Pull_routine.png: this tests the pull command without object,tests attempt to pull a primitive. |
| 12:22.42 | Notify | 03BRL-CAD Wiki:Vladbogolin * 5754 /wiki/User:Vladbogolin/GSoC2013/Logs: |
| 12:22.44 | Notify | 03BRL-CAD Wiki:Harman052 * 5755 /wiki/User:Harman052/GSoc2013/Logs: Details Updated |
| 12:22.46 | Notify | 03BRL-CAD Wiki:IIIzzzaaakkk * 5756 /wiki/User:Izak/GSOC_2013_logs: /* Monthly Summary */ |
| 12:22.54 | Notify | 03BRL-CAD Wiki:IIIzzzaaakkk * 5757 /wiki/User:Izak/GSOC_2013_logs: /* From July 22th to July 27th */ |
| 12:23.25 | Notify | 03BRL-CAD:phoenixyjll * 56193 brlcad/trunk/src/libbrep/intersect.cpp: knots is still used below. Delete it after all use. |
| 12:23.30 | Notify | 03BRL-CAD:starseeker * 56194 brlcad/trunk/src/conv/3dm/3dm-g.cpp: This is ugly and probably not the generally correct thing to do, but if a 3dm object is not a Brep but has a Brep form, create that Brep form and import it into the .g file. |
| 12:23.32 | Notify | 03BRL-CAD:phoenixyjll * 56195 brlcad/trunk/src/libbrep/intersect.cpp: Handle degenerated cases (the curve is degenerated to a point) |
| 12:23.35 | Notify | 03BRL-CAD:phoenixyjll * 56196 brlcad/trunk/src/libbrep/intersect.cpp: Rename shadowed variables. |
| 12:23.40 | Notify | 03BRL-CAD:phoenixyjll * 56197 brlcad/trunk/src/libbrep/intersect.cpp: left should be set to NULL if it's deleted. Otherwise the below Split() will crash. |
| 12:24.34 | Notify | 03BRL-CAD:phoenixyjll * 56198 brlcad/trunk/src/librt/tests/test_ssi.cpp: common.h is included twice. |
| 12:24.43 | Notify | 03BRL-CAD:vladbogo * 56199 (brlcad/trunk/include/dm-qt.h brlcad/trunk/src/libdm/dm-qt.cpp): Set font size according to window size. |
| 12:42.52 | *** join/#brlcad cvds (~leila@s537510ac.adsl.online.nl) | |
| 12:46.51 | cvds | Hello. What would be a good way to both design a basic part and place multiple of them on a bigger part. Copying would work but then changes in the base component wont propagate. So I was thinking of wrapping them in a combination first such that I can place them with a matrix transformation. |
| 12:47.06 | cvds | or it could be that I am making things way to complicated |
| 12:48.47 | zero_level | I hope my summary on the list was fine ? |
| 13:47.53 | *** join/#brlcad kesha (~kesha@14.139.122.114) | |
| 13:58.47 | brlcad | cvds: it entirely depends how you copy the object -- putting them into a comb with matrices is the way to make changes to the base propagate |
| 14:03.54 | brlcad | zero_level: it was fine, why the concern? |
| 14:07.26 | zero_level | I like to have ack's. And found that most of the fellow students recieved. |
| 14:07.43 | zero_level | thus. |
| 14:08.33 | brlcad | ack :) |
| 14:08.59 | zero_level | rather ack(s) ;) |
| 14:11.26 | brlcad | zero_level: most of them I'd replied to have them do more .. would you like to do more? :) |
| 14:12.00 | brlcad | if you know something you could have done better, do it, don't wait for me to tell you ... don't just do the minimum you can get away with |
| 14:12.29 | brlcad | I can certainly be critical ... |
| 14:12.43 | brlcad | you like several other students top-posted a reply, don't do that |
| 14:12.59 | zero_level | to me that implies without being told. :-) |
| 14:13.57 | brlcad | you also stated what all the other groups were, but not group five, so I'm left to imagine or research what you will be doing next |
| 14:14.44 | zero_level | <PROTECTED> |
| 14:14.52 | brlcad | otherwise, your update was good |
| 14:14.58 | zero_level | interpolate. |
| 14:15.11 | zero_level | shld have mentioned it. |
| 14:15.25 | brlcad | I know that, but I'm sure nobody else did |
| 14:15.42 | brlcad | don't give your reader work unnecessarily |
| 14:16.34 | zero_level | alright |
| 14:16.46 | brlcad | I could have stated all this in an e-mail, but then it wasn't technically relevant and technical summary was the purpose |
| 14:17.13 | brlcad | your techinical summary was fine |
| 14:17.58 | cvds | brlcad: thanks |
| 14:18.24 | brlcad | so just future reference, a lack of reply is not to imply a lack of interest or anything really! a lack of information is not information :) |
| 14:18.35 | brlcad | at least in this context |
| 14:37.08 | *** join/#brlcad Ch3ck (~Ch3ck@195.24.220.16) | |
| 14:51.59 | *** join/#brlcad caen23 (~caen23@92.83.185.253) | |
| 15:37.35 | cvds | is there a tutorial somewhere on the oed command ? |
| 15:50.37 | cvds | nevermind, I am blind |
| 16:04.13 | *** join/#brlcad kesha (~kesha@14.139.122.114) | |
| 16:29.04 | *** join/#brlcad maths22 (~gcimaths@66-118-151-70.static.sagonet.net) | |
| 16:36.52 | Ch3ck | facing a problem here with creating patches that apply cleanly |
| 16:37.07 | Ch3ck | just created the patch for stubbing the pull routine into brlcad |
| 16:37.17 | Ch3ck | applied the patch to working copy of brlcad |
| 16:37.23 | Ch3ck | did an svn diff |
| 16:37.52 | Ch3ck | reverted the patch and applied the newly created svn diff patch |
| 16:39.03 | Ch3ck | it gives me this error "can't find file to patch at input line 5 |
| 16:39.04 | Ch3ck | Perhaps you used the wrong -p or --strip option? |
| 16:39.04 | Ch3ck | The text leading up to this was: |
| 16:39.04 | Ch3ck | -------------------------- |
| 16:39.04 | Ch3ck | |Index: include/ged.h |
| 16:39.04 | Ch3ck | |=================================================================== |
| 16:39.05 | Ch3ck | |--- include/ged.h(revision 56199) |
| 16:39.07 | Ch3ck | |+++ include/ged.h(working copy) |
| 16:39.09 | Ch3ck | -------------------------- |
| 16:39.11 | Ch3ck | File to patch: |
| 16:39.17 | Ch3ck | don't really have a go ahead here.. |
| 17:01.51 | Ch3ck | Sorry guys found the problem was patching from the wrong directory. Everything is fine |
| 17:38.30 | *** join/#brlcad caen23_ (~caen23@92.85.81.7) | |
| 18:27.17 | *** join/#brlcad Ch3ck (~Ch3ck@195.24.220.16) | |
| 18:30.17 | *** join/#brlcad vladbogo (~vladbogo@188.25.237.68) | |
| 18:33.26 | *** join/#brlcad kesha (~kesha@14.139.122.114) | |
| 18:42.20 | *** join/#brlcad Izak_ (~Izak@195.24.220.16) | |
| 19:13.35 | *** join/#brlcad kesha_ (~kesha@14.139.122.114) | |
| 19:31.53 | *** join/#brlcad harmanpreet (~harman@linuxfor.info) | |
| 20:47.59 | ``Erik | http://randomascii.wordpress.com/2013/07/16/floating-point-determinism/ |
| 21:26.12 | starseeker | ``Erik: that's just depressing |
| 22:16.25 | *** join/#brlcad KimK (~Kim__@wsip-184-176-200-171.ks.ks.cox.net) | |