| 00:02.56 | *** join/#brlcad merzo (~merzo@195-178-132-95.pool.ukrtel.net) | |
| 00:16.08 | Notify | 03GCI:Alex * 6304634838712320 Write a manual page for MGED's ''brep'' command: Ready for review - The work on this task is ready to be reviewed. |
| 00:19.11 | *** join/#brlcad merzo (~merzo@177-26-132-95.pool.ukrtel.net) | |
| 01:11.42 | Notify | 03GCI:Mandeep Kaur * 5795924014006272 Update xref to use BRL-CAD 7.24.0: Task Assigned - This task has been assigned to Jacob B. You have 72 hours to complete this task, good luck! |
| 01:27.23 | Notify | 03GCI:Jacob B * 5795924014006272 Update xref to use BRL-CAD 7.24.0: Ready for review - The work on this task is ready to be reviewed. |
| 01:34.34 | maths22 | brlcad: are centroids relative to the db origin or to the origin of the object? |
| 01:55.45 | Notify | 03GCI:Kristian Hansen * 4967846266273792 Identify and eliminate code duplication (100+ lines) #3: Ready for review - The work on this task is ready to be reviewed. |
| 02:26.18 | maths22 | also, what is the mat matrix stored within a circle |
| 02:26.27 | maths22 | sorry, I meant within a vol |
| 02:44.39 | Notify | 03GCI:Sean * 5795924014006272 Update xref to use BRL-CAD 7.24.0: Task Closed - Congratulations, this task has been completed successfully. |
| 02:46.22 | maths22 | never mind all my questions |
| 02:49.18 | Notify | 03GCI:Jacob B * 5385202599723008 Implement a centroid function for gridded volumes (VOL): Task Claimed - I would like to work on this task. |
| 02:51.10 | *** join/#brlcad maths22 (~gcimaths@66-118-151-70.static.sagonet.net) | |
| 02:57.47 | brlcad | maths22: centroids should be relative to the global origin |
| 02:57.57 | brlcad | most primitives to not have a local origin concept |
| 02:59.15 | Notify | 03GCI:Sean * 5385202599723008 Implement a centroid function for gridded volumes (VOL): Task Assigned - This task has been assigned to Jacob B. You have 72 hours to complete this task, good luck! |
| 02:59.18 | maths22 | I have done that now by applying the mat matrix |
| 03:00.15 | maths22 | Patch submitted to melange |
| 03:00.25 | Notify | 03GCI:Jacob B * 5385202599723008 Implement a centroid function for gridded volumes (VOL): Ready for review - The work on this task is ready to be reviewed. |
| 03:01.23 | maths22 | By the way, I will do the drupal upgrade task next |
| 03:13.22 | Notify | 03GCI:Sean * 6304634838712320 Write a manual page for MGED's ''brep'' command: close enough - Alex, that is a valid patch file, hurrah! You've certainly made a lot of progress and put effort into... |
| 03:14.59 | Notify | 03BRL-CAD:brlcad * 58965 brlcad/trunk/doc/docbook/system/mann/en/CMakeLists.txt: apply gci patch http://www.google-melange.com/gci/task/view/google/gci2013/6304634838712320 from 'Alex', heavily modified. fixed the xml tag errors, used the simpler boilerplate, but left the various write-up mistakes. he put a lot of effort and iterations in, hopefully someone will follow-on. |
| 03:15.00 | Notify | 03GCI:Sean * 6304634838712320 Write a manual page for MGED's ''brep'' command: Task Closed - Congratulations, this task has been completed successfully. |
| 03:15.02 | gcibot | Write a manual page for MGED's ''brep'' command |
| 03:15.02 | gcibot | Status: Closed |
| 03:15.02 | gcibot | Mentor(s): Sean |
| 03:21.29 | Notify | 03GCI:Sean * 6304634838712320 Write a manual page for MGED's ''brep'' command http://www.google-melange.com/gci/task/view/google/gci2013/6304634838712320: follow-on task A follow-on to this task... |
| 03:26.36 | Notify | 03GCI:Sean * 6304634838712320 Write a manual page for MGED's ''brep'' command: full name - Never mind about providing your full name -- I found it from your other GCI tasks. Thanks again. |
| 03:27.09 | Notify | 03BRL-CAD:brlcad * 58966 brlcad/trunk/AUTHORS: credit Alexander Lotsu with his various GCI task contributions. namely, he's provided an initial brep man page, a windows maintainer solicit, a command quick ref, and a phone design. |
| 03:50.34 | Notify | 03GCI:Sean * 5257831183810560 Model a martini glass for a business card diagram: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to... |
| 04:03.35 | Notify | 03GCI:Sean * 5257831183810560 Model a martini glass for a business card diagram: almost perfect - This model is almost what we need, but there are some issues to think about Sharan. First off, the... |
| 04:05.50 | Notify | 03GCI:Sean * 5876128501727232 Implement a platform independent re-entrant sort function: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s)... |
| 04:06.05 | Notify | 03GCI:Sean * 5876128501727232 Implement a platform independent re-entrant sort function: Deadline extended - The deadline of the task has been extended with 1 days and 0 hours. |
| 04:25.13 | Notify | 03GCI:Sean * 5876128501727232 Implement a platform independent re-entrant sort function: credit where credit is due - Johannes, this is looking really good but there is one major problem with the... |
| 04:39.35 | Notify | 03GCI:Sean * 4967846266273792 Identify and eliminate code duplication (100+ lines) #3: Patch format - Kristian, I missed your earlier comment but wish I hadn't... you put in good effort but on code... |
| 04:39.40 | Notify | 03GCI:Sean * 4967846266273792 Identify and eliminate code duplication (100+ lines) #3: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned... |
| 04:40.00 | Notify | 03GCI:Sean * 4967846266273792 Identify and eliminate code duplication (100+ lines) #3: Deadline extended - The deadline of the task has been extended with 1 days and 12 hours. |
| 04:43.11 | Notify | 03GCI:Sean * 6441518265008128 Design a T-Shirt for BRL-CAD #3: not understanding - Deep, I don't think you're understanding the feedback. You've made the design even wider!... Wide text is bad. It... |
| 04:43.21 | Notify | 03GCI:Sean * 6441518265008128 Design a T-Shirt for BRL-CAD #3: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy... |
| 04:43.31 | Notify | 03GCI:Sean * 6441518265008128 Design a T-Shirt for BRL-CAD #3: Deadline extended - The deadline of the task has been extended with 2 days and 0 hours. |
| 04:46.56 | Notify | 03GCI:Sean * 5495828743454720 Write a script to complete all DocBook image tag updates: Review - Starseeker, would you review this? Looks reasonable to me at a glance, but not sure if you had... |
| 04:55.25 | Notify | 03GCI:Sean * 5385202599723008 Implement a centroid function for gridded volumes (VOL): Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned... |
| 04:55.27 | Notify | 03GCI:Sean * 5385202599723008 Implement a centroid function for gridded volumes (VOL): minor stylistic - Jacob, this looks good to me. Only issues I note are cosmetic code conventions issues that... |
| 04:57.49 | Notify | 03BRL-CAD:brlcad * 58967 (brlcad/trunk/src/conv/dxf/dxf.h brlcad/trunk/src/conv/iges/PullbackCurve.h and 14 others): apply gci patch http://www.google-melange.com/gci/task/view/google/gci2013/6380108822609920 from agkphysics that puts consistent header guards in place for all of src/conv |
| 04:57.49 | gcibot | Consistent preprocessor include guards for all src/conv/ headers |
| 04:57.50 | gcibot | Status: Closed |
| 04:57.50 | gcibot | Mentor(s): Sean |
| 04:58.08 | Notify | 03GCI:Deep Inder Singh * 6441518265008128 Design a T-Shirt for BRL-CAD #3: Understand - Ok Sean, Now i understand your feedback. That i was confused what is widened. now i keep your instructions... |
| 05:00.33 | Notify | 03GCI:Sean * 6380108822609920 Consistent preprocessor include guards for all src/conv/ headers: paste the script? - Since the task is closed, how about just pasting the script here in a comment?... |
| 06:02.19 | Notify | 03GCI:Kristian Hansen * 4967846266273792 Identify and eliminate code duplication (100+ lines) #3: Didn't use SVN to get source code - I would release it in a patch format, but I downloaded it as a... |
| 06:05.29 | Notify | 03GCI:Anita Leung * 4573705707454464 Design new Archer splash screen #2: Task Claimed - I would like to work on this task. |
| 06:09.44 | Notify | 03GCI:Mandeep Kaur * 4573705707454464 Design new Archer splash screen #2: Task Assigned - This task has been assigned to Anita Leung. You have 72 hours to complete this task, good luck! |
| 07:49.42 | Notify | 03GCI:Daniel Rossberg * 5876128501727232 Implement a platform independent re-entrant sort function: Deprecated genptr_t - Using void* is Ok. |
| 08:02.05 | *** join/#brlcad d_rossberg (~rossberg@66-118-151-70.static.sagonet.net) | |
| 08:04.29 | Notify | 03GCI:Alex * 6304634838712320 Write a manual page for MGED's ''brep'' command: follow on task - Thanks for editing my work sorry there were some errors, i will checkout the follow on work. |
| 08:06.20 | Notify | 03GCI:Melange * 4673576447770624 Reproduce any 5 unconfirmed open bug reports: Task Reopened - Melange has detected that the final deadline has passed and it has reopened the task. |
| 08:42.07 | *** join/#brlcad avneet (~avneet@202.164.53.122) | |
| 08:42.45 | avneet | exit |
| 08:42.49 | avneet | exit |
| 08:43.03 | avneet | exithi |
| 08:45.35 | *** join/#brlcad Kn_king (~Kn_king@195.24.220.16) | |
| 08:48.52 | *** join/#brlcad Chick_ (~Chick_@195.24.220.16) | |
| 08:50.24 | Chick_ | hi need help compiling brlcad |
| 08:52.22 | Chick_ | when i run the configure script i get this error: Can't find Tcl configuration definitions |
| 08:53.30 | d_rossberg | Chick_: you shouldn't use configure any more, use CMake instead |
| 08:54.59 | d_rossberg | e.g. see INSTALL |
| 08:59.01 | *** join/#brlcad merzo (~merzo@user-94-45-58-138-1.skif.com.ua) | |
| 09:20.27 | *** join/#brlcad devinder_ (~devinder@202.164.53.117) | |
| 09:20.40 | devinder_ | exit |
| 10:01.52 | Notify | 03GCI:Sharan Narayan * 5257831183810560 Model a martini glass for a business card diagram: Ready for review - The work on this task is ready to be reviewed. |
| 10:03.57 | Notify | 03GCI:Sharan Narayan * 5257831183810560 Model a martini glass for a business card diagram: Didn't Understand - I was confused and made two versions i have included 2 .g files, 2 wireframes, 2... |
| 10:23.34 | *** join/#brlcad witness__ (uid10044@gateway/web/irccloud.com/x-fhraojbehhvwofow) | |
| 10:49.53 | *** join/#brlcad gjeet (~gjeet@117.220.146.250) | |
| 11:17.23 | Notify | 03GCI:AdityaGulati * 5260604122071040 Design a BRL-CAD business card #5: Task Claimed - I would like to work on this task. |
| 11:17.29 | *** join/#brlcad Chick_ (~Chick_@195.24.220.16) | |
| 11:20.24 | Notify | 03GCI:Gauravjeet Singh * 5260604122071040 Design a BRL-CAD business card #5: Task Assigned - This task has been assigned to AdityaGulati. You have 72 hours to complete this task, good luck! |
| 13:01.49 | Chick_ | im currently running the make benchmark script of brlcad and its taking too much time can i abort it and proceed to make install? |
| 14:05.37 | Notify | 03GCI:Luke Blue * 5509389028950016 Design a BRL-CAD Sticker #10: Task Claimed - I would like to work on this task. |
| 14:10.22 | Notify | 03GCI:Mandeep Kaur * 5509389028950016 Design a BRL-CAD Sticker #10: Task Assigned - This task has been assigned to Luke Blue. You have 72 hours to complete this task, good luck! |
| 14:15.38 | Notify | 03GCI:Melange * 5256659194609664 Design a cover image or banner for our Facebook page (and/or another social media site) #10: Initial Deadline passed - Melange has detected that the initial deadline... |
| 14:57.05 | *** join/#brlcad merzo (~merzo@user-94-45-58-138-1.skif.com.ua) | |
| 15:08.07 | Notify | 03BRL-CAD:carlmoore * 58968 brlcad/trunk/doc/docbook/system/mann/en/brep.xml: fix a spelling, and remove trailing blanks/tabs |
| 15:38.26 | Notify | 03GCI:Jacob B * 5385202599723008 Implement a centroid function for gridded volumes (VOL): Ready for review - The work on this task is ready to be reviewed. |
| 15:41.07 | *** join/#brlcad gjeet (~gjeet@117.220.146.250) | |
| 15:46.34 | *** join/#brlcad merzo (~merzo@user-94-45-58-138-1.skif.com.ua) | |
| 15:47.40 | *** part/#brlcad gjeet (~gjeet@117.220.146.250) | |
| 15:50.26 | Notify | 03GCI:Cameron * 4972733939056640 Create a BRL-CAD presentation template #2: Task Claimed - I would like to work on this task. |
| 15:53.42 | Notify | 03GCI:Mandeep Kaur * 4972733939056640 Create a BRL-CAD presentation template #2: Task Assigned - This task has been assigned to Cameron. You have 72 hours to complete this task, good luck! |
| 15:54.06 | *** join/#brlcad kesha__ (~kesha@49.202.238.96) | |
| 15:57.02 | Notify | 03GCI:Deep Inder Singh * 6441518265008128 Design a T-Shirt for BRL-CAD #3: Ready for review - The work on this task is ready to be reviewed. |
| 15:59.18 | Notify | 03GCI:Deep Inder Singh * 6441518265008128 Design a T-Shirt for BRL-CAD #3: Mistake - I accidently upload file name as : backgroundnew1.jpg The designs are in file t-shirt(againrevised).rar ... |
| 16:20.34 | *** join/#brlcad merzo (~merzo@user-94-45-58-138-1.skif.com.ua) | |
| 16:27.16 | maths22 | Notify doesn't seem to be working noew |
| 16:27.34 | maths22 | never mind; my IRC client was scrolled up |
| 16:36.35 | brlcad | starseeker: would you take a look and see if this is what you wanted: http://www.google-melange.com/gci/task/view/google/gci2013/5495828743454720 |
| 16:36.36 | gcibot | Write a script to complete all DocBook image tag updates |
| 16:36.37 | gcibot | Status: NeedsReview (47 hours, 26 minutes left) |
| 16:36.37 | gcibot | Mentor(s): starseeker, Sean |
| 16:51.52 | Notify | 03GCI:Sean * 5257831183810560 Model a martini glass for a business card diagram: it's a mix - Sharan, So the idea is just like a mix of Glass1.jpg and render1.jpg. It'll look more like glass1.jpg... |
| 16:52.28 | Notify | 03GCI:Sean * 5257831183810560 Model a martini glass for a business card diagram: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to... |
| 16:56.06 | Notify | 03BRL-CAD:brlcad * 58969 (brlcad/trunk/src/librt/primitives/table.c brlcad/trunk/src/librt/primitives/vol/vol.c): apply gci patch http://www.google-melange.com/gci/task/view/google/gci2013/5385202599723008 from maths22 that implements a centroid function for vol objects. cool. |
| 16:56.07 | Notify | 03GCI:Sean * 5385202599723008 Implement a centroid function for gridded volumes (VOL): Task Closed - Congratulations, this task has been completed successfully. |
| 16:56.08 | gcibot | Implement a centroid function for gridded volumes (VOL) |
| 16:56.08 | gcibot | Status: Closed |
| 16:56.08 | gcibot | Mentor(s): Sean |
| 16:56.46 | Notify | 03GCI:Sean * 5385202599723008 Implement a centroid function for gridded volumes (VOL): applied - Your patch was applied in r58969, excellent work. |
| 16:59.36 | Notify | 03GCI:Sean * 6441518265008128 Design a T-Shirt for BRL-CAD #3: Task Closed - Congratulations, this task has been completed successfully. |
| 16:59.41 | Notify | 03GCI:Sean * 6441518265008128 Design a T-Shirt for BRL-CAD #3: getting better - Thanks for all your efforts, Deep. I think brlcad_white_tshirt2 looked best of the set. |
| 17:04.11 | Notify | 03GCI:Jacob B * 6067909797347328 Update Drupal installation: Task Claimed - I would like to work on this task. |
| 17:06.26 | Notify | 03GCI:Mandeep Kaur * 6067909797347328 Update Drupal installation: Task Assigned - This task has been assigned to Jacob B. You have 72 hours to complete this task, good luck! |
| 17:09.27 | Notify | 03GCI:Jacob B * 6067909797347328 Update Drupal installation: Ready for review - The work on this task is ready to be reviewed. |
| 17:10.47 | Notify | 03GCI:Sharan Narayan * 5257831183810560 Model a martini glass for a business card diagram: Ready for review - The work on this task is ready to be reviewed. |
| 17:30.46 | *** join/#brlcad merzo (~merzo@user-94-45-58-138-1.skif.com.ua) | |
| 17:59.54 | Notify | 03GCI:Melange * 4932878790033408 Fix at least 8 spelling mistakes in at least 8 different files #7: Initial Deadline passed - Melange has detected that the initial deadline has passed and it has set... |
| 19:00.04 | Notify | 03BRL-CAD:starseeker * 58970 brlcad/trunk/src/libbn/plane.c: Handle the case where we have two or more equal points passed to the 3pts_collinear routine - fixes unit test #254. |
| 19:08.18 | Notify | 03BRL-CAD:starseeker * 58971 brlcad/trunk/src/libbn/tests/CMakeLists.txt: Three identical points are degenerately collinear - this is an API decision whether this is a success or failure, for now assume success. |
| 19:15.14 | starseeker | brlcad: I think that's got it - let me apply the diff quick and make sure |
| 19:27.33 | Notify | 03BRL-CAD:carlmoore * 58972 brlcad/trunk/src/fb/gif-fb.c: remove some braces (and an unneeded 'break'), but where I eliminated an 'else', I put in some braces to help readability |
| 19:27.58 | Notify | 03BRL-CAD:starseeker * 58973 (brlcad/trunk/doc/docbook/articles/en/TEMPLATE.xml brlcad/trunk/doc/docbook/articles/en/build_pattern.xml and 35 others): Commit slightly modified version of patch from Andromeda Galaxy (GCI Task #5495828743454720) that scripted the update of the remaining image tags. The original patches undid some DocBook symbol specifications, so those needed to be removed from the patch, but |
| 19:28.00 | Notify | otherwise a nice job. |
| 19:30.39 | starseeker | brlcad: if we want to define the follow-on task, it is now to use those purpose specific objects to make both the PDF and HTML images look right in the various outputs using the various sizing options |
| 19:31.14 | starseeker | brlcad: should I write that up? That one can't be scripted, since each image will be different |
| 19:32.07 | starseeker | needs Apache FOP for the PDF output |
| 19:35.34 | Notify | 03BRL-CAD:starseeker * 58974 brlcad/trunk/src/libbn/tests/CMakeLists.txt: Only seeing bn_plane_isect_line_lseg failures now. |
| 20:09.44 | Notify | 03GCI:Johannes Schulte * 5876128501727232 Implement a platform independent re-entrant sort function: Ready for review - The work on this task is ready to be reviewed. |
| 20:11.14 | Notify | 03GCI:Johannes Schulte * 5876128501727232 Implement a platform independent re-entrant sort function: Next try - Thanks for your explanation, thats what my "source naming"-question was all about. |
| 20:18.15 | Notify | 03GCI:Johannes Schulte * 5876128501727232 Implement a platform independent re-entrant sort function http://www.google-melange.com/gci/task/view/google/gci2013/5876128501727232: None Oops, shame... |
| 20:22.12 | Notify | 03GCI:Kristian Hansen * 4967846266273792 Identify and eliminate code duplication (100+ lines) #3: Please reply - Please respond to my previous question, don't want the same thing happening again. |
| 21:33.46 | *** join/#brlcad remadenika (~remadenik@91.210.100.196) | |
| 21:35.09 | Notify | 03BRL-CAD Wiki:HaileyDesai * 0 /wiki/User:HaileyDesai: |
| 21:41.55 | *** join/#brlcad dosudlux (~dosudlux@91.210.100.131) | |
| 21:49.21 | Notify | 03BRL-CAD:tbrowder2 * 58975 (brlcad/trunk/include/bu.h brlcad/trunk/include/pkg.h and 58 others): updates to get BRL-CAD C source files compiled warning- and error-freewith a C++ compiler:added const (and casts) as necessary to eliminate many instances of:warning: deprecated conversion from string constant to 'char*' [-Wwrite-strings]in the process had to add some char and const char variables for charand const |
| 21:49.23 | Notify | char pointer usesuccessful debug build on Debian 7, 64-bit:no warnings or errors (except for the usual from libgiam, tcl, and step)successful 'make regress'successful bu_redblack_test with 'make test' |
| 22:19.54 | Notify | 03BRL-CAD:tbrowder2 * 58976 brlcad/trunk/src/libbn/mat.c: rename var 'new' which is a C++ keyword; also rename associated vars for consistency |
| 22:28.24 | Notify | 03BRL-CAD:tbrowder2 * 58977 brlcad/trunk/src/util/azel.c: remove old, erroneous line which was replaced by the following line and mistakenly not removed |
| 22:30.49 | Notify | 03BRL-CAD:tbrowder2 * 58978 brlcad/trunk/src/sig/smod.c: remove spurious func decl which is from string.h |
| 22:58.24 | Notify | 03BRL-CAD:starseeker * 58979 (brlcad/trunk/CMakeLists.txt brlcad/trunk/src/conv/step/CMakeLists.txt): Make a very strong effort to make sure file generation is complete for the step-g and g-step inputs - use a looping MD5 comparison script to make sure the file is stable over time before generate the stamp file rather than just creating the stamp after CMake thinks the exp2cxx process is complete. Even this can be |
| 22:58.26 | Notify | messed up by sufficiently bizarre I/O issues, but if a situation arises where the files are still changing even after being in a metastable state for a full second on the filesystem we can alter this setup and make the sleep length a parameter rather than fixing it at one second. |
| 23:11.14 | starseeker | invites anyone who was having issues with step-g in parallel building to take a wack at it with r58979 in place to see if that addresses the problem successfully |