| 01:42.30 | *** join/#brlcad FOSScookie (~brian@107-200-34-31.lightspeed.tulsok.sbcglobal.net) | |
| 01:44.28 | maths22 | brlcad: I feel like I should be doing something for you all, but I'm not sure what |
| 01:44.36 | maths22 | I just switched computers |
| 02:03.38 | *** join/#brlcad konro (~konro@41.205.22.53) | |
| 02:25.32 | brlcad | maths22: getting the new website online would be awesome :) |
| 02:26.42 | maths22 | can you tell me some steps that need doing? |
| 02:26.51 | maths22 | Obviously, the header is right now a problem |
| 02:27.07 | maths22 | Also, I will add the images |
| 02:28.00 | brlcad | I'd think first up is to review all the GCI-submitted website tasks (the wp themes) and review/merge them together |
| 02:28.17 | brlcad | anita's was quite impressive iirc |
| 02:28.32 | brlcad | they all had interesting aspects |
| 02:29.01 | maths22 | I think I right now am running anita's |
| 02:29.18 | brlcad | do you have a sense for what the major differences were? |
| 02:29.41 | brlcad | there were different quality menus |
| 02:30.30 | brlcad | two(?) were responsive design, but anita's menu overflowed and only had a simple underline |
| 02:30.40 | maths22 | I can't right now load the melange completed tasks list |
| 02:30.46 | maths22 | That is my problem with hers |
| 02:31.10 | brlcad | that's why I think the first step is to create a theme that takes the best from all of them |
| 02:31.44 | brlcad | or maybe even just shove all three into SVN and create a fourth were features are manually pulled in as cleanly as possible, but starting as simple as possible |
| 02:31.49 | maths22 | That would make sense |
| 02:32.16 | maths22 | I personally would use git for that, unless there is a compelling reason to create an svn repo |
| 02:32.37 | maths22 | Given that I don't have comitt access to the one with a web dir |
| 02:32.42 | maths22 | (not that I should yet) |
| 02:33.07 | brlcad | actually you do |
| 02:38.51 | brlcad | you have the ability to commit to the repo now (I mean c'mon, you've earned it) |
| 02:39.12 | brlcad | have had it for a while, but haven't been on hand to talk :) |
| 02:39.35 | brlcad | that said, git vs svn isn't interesting or important to me right now -- getting the site up is :) |
| 02:40.06 | brlcad | if git makes that easier for you personally, no problem |
| 02:40.22 | brlcad | git or svn would be fine, but I'd still want it to all push to at least sf.net if not our sf and github project pages eventually |
| 02:40.27 | maths22 | I guess I did more code work this year than I realized |
| 02:41.34 | maths22 | SVN is fine for me then |
| 02:41.51 | maths22 | Should I work in a branch or clean out the version from 2010? |
| 02:41.59 | brlcad | doesn't matter |
| 02:42.22 | maths22 | I think I will get rid of the 2010 stuff. It isn't doing anyone any good |
| 02:42.29 | maths22 | I think |
| 02:42.59 | brlcad | htdocs is the "web root" |
| 02:43.30 | brlcad | everything above it was documentation for the checkout, a place to put content not intended to go into the root |
| 02:43.36 | brlcad | like documentation |
| 02:44.04 | brlcad | it'd be good to commit a version of everything currently live on the website before deleting it |
| 02:44.12 | brlcad | just to have a backup |
| 02:44.51 | brlcad | I could work on doing that if you're not that familiar with svn yet |
| 02:45.55 | brlcad | or just take up the flag and make it yours - I can do a manual backup instead just as well |
| 02:46.09 | brlcad | just let me know before files on brlcad.org are actually about to change |
| 02:49.03 | maths22 | I updated all the doc files |
| 02:49.37 | maths22 | I was thinking I would comitt those, and then commit the current version (right now the real site and the svn repo have nothing to do with each other) |
| 02:50.06 | maths22 | could you set up a beta.brlcad.org (or something like that) subdomain? |
| 02:50.48 | brlcad | yeah, commit early, commit often |
| 02:50.49 | brlcad | never fear committing frequently ;) |
| 02:51.23 | brlcad | and yes, subdomains are set up easily -- just let me know what you want |
| 02:52.24 | maths22 | beta.brlcad.org so I can test without breaking the site or working in a subdir that will mess up links |
| 02:53.09 | Notify | 03BRL-CAD:maths22 * 59663 (web/trunk/AUTHORS web/trunk/README): Updated AUTHORS to include maths22Updated README to match the current mysql-backed website |
| 02:53.58 | maths22 | first commit! |
| 02:54.35 | maths22 | should I comitt the whole current www version |
| 02:55.03 | maths22 | all files (or should some be excluded from version control besides wp [that is what I will replace it with]) |
| 03:09.05 | maths22 | brlcad: also, I only remember 2 wp theme tasks: |
| 03:09.10 | maths22 | http://www.google-melange.com/gci/task/view/google/gci2013/4671617942683648 |
| 03:09.11 | gcibot | Create Wordpress theme for BRL-CAD website |
| 03:09.11 | gcibot | Status: Closed |
| 03:09.11 | gcibot | Mentor(s): Sean |
| 03:09.15 | maths22 | http://www.google-melange.com/gci/task/view/google/gci2013/5956421170495488 |
| 03:09.16 | gcibot | Create Wordpress theme for BRL-CAD website #2 |
| 03:09.16 | gcibot | Status: Closed |
| 03:09.16 | gcibot | Mentor(s): Sean |
| 03:09.27 | maths22 | Apparently gcibot is still live |
| 03:10.01 | brlcad | http://beta.brlcad.org/ is in place |
| 03:11.10 | brlcad | I left the instructions in place for /d /viewvc /buildbot and /xref |
| 03:12.47 | brlcad | ideally, the current www version is committed, but there is almost certainly content that should not be committed for a variety of reasons (legal and otherwise) |
| 03:13.08 | brlcad | if you can sort out what's actually in use / active, that would be good |
| 03:13.26 | *** join/#brlcad FOSScookie (~brian@107-200-34-31.lightspeed.tulsok.sbcglobal.net) | |
| 03:13.53 | brlcad | maths22: you know what, let's not obsess on the past for web work |
| 03:14.15 | brlcad | it's not like our C code heritage and it's far more lacking in merit |
| 03:14.54 | brlcad | if you can leave the current web root alone (on the filesystem), that's good enough for archival |
| 03:15.23 | maths22 | ok |
| 03:15.27 | brlcad | new root is a new empty beta.brlcad.org dir -- we can identify and merge in new content as needed |
| 03:15.30 | maths22 | thanks |
| 03:15.30 | brlcad | so you can start fresh |
| 03:15.37 | maths22 | what do you mean by instructions |
| 03:15.45 | brlcad | and do whatever you like with the svn module |
| 03:16.04 | brlcad | instructions == the apache directives |
| 03:16.45 | maths22 | ok |
| 03:17.24 | maths22 | I will eventually figure out a way for xref to auto-update (cron job)? |
| 03:17.38 | maths22 | I'm not going to add that to svn (for now at least) |
| 03:18.12 | maths22 | I'm thinking I'll bring in gallery as is (after I check it for passwords) |
| 03:21.20 | maths22 | actually, I won't |
| 03:21.27 | maths22 | I want to do it as cleanly as possible |
| 03:21.28 | brlcad | not using a wp gallery extension? |
| 03:21.34 | maths22 | that is what I am realizing |
| 03:21.41 | maths22 | I should build from the ground up |
| 03:22.14 | brlcad | heh, no fewer than 40 options in the wp plugins directory |
| 03:24.00 | Notify | 03BRL-CAD:maths22 * 59664 web/trunk/README: Added missing close parend |
| 03:25.00 | Notify | 03BRL-CAD:maths22 * 59665 (web/trunk/htdocs/.htaccess =================================================================== and 6 others): Cleaned out htdocs of all old files so we can start new and only reuse oldcontent as desired. |
| 03:26.18 | brlcad | maths22: the top-level docs aren't sacred |
| 03:26.33 | brlcad | you're welcome to rework them or eliminate or change as needed |
| 03:26.43 | brlcad | just need some place to stash files not in the web root |
| 03:26.48 | brlcad | however you achieve that is fine with me |
| 03:27.05 | brlcad | if what's there works, great |
| 03:27.21 | brlcad | otherwise, you should make it work :) |
| 04:10.18 | Notify | 03BRL-CAD:brlcad * 59666 brlcad/trunk/src/libged/simulate/simrt.c: rewrite to not peek into vls internals |
| 04:15.21 | *** join/#brlcad konro (~konro@41.205.22.53) | |
| 04:34.08 | Notify | 03BRL-CAD:brlcad * 59667 brlcad/trunk/include/bu.h: undo r59655 as the 'offset' most definitely should not be signed. if it's ever a negative value, our routines will heartily crash. the msvc warning was almost certainly due to trickery in bu_vls_nibble() which lets one unroll an offset back to zero (i.e., it's a false positive, but a really hard one to detect). need to fix the nibbler. src/libbu |
| 04:34.26 | Notify | 03BRL-CAD:brlcad * 59668 brlcad/trunk/src/libbu/vls.c: undo r59655 as the 'offset' most definitely should not be signed. if it's ever a negative value, our routines will heartily crash. the msvc warning was almost certainly due to trickery in bu_vls_nibble() which lets one unroll an offset back to zero (i.e., it's a false positive, but a really hard one to detect). need to fix the nibbler. |
| 04:39.50 | *** join/#brlcad konro_ (~konro@41.205.22.53) | |
| 04:50.47 | *** join/#brlcad FOSScookie (~brian@107-200-34-31.lightspeed.tulsok.sbcglobal.net) | |
| 05:03.26 | Notify | 03BRL-CAD:brlcad * 59669 (brlcad/trunk/include/bu.h brlcad/trunk/src/libbu/vls.c): rewrite bu_vls_nibble() so that it only performs unsigned math on the size_t struct elements. this should appease compilers that don't realize we already accounted for negative nibbles that prevent vls_offset from ever underflowing beyond zero. this is an overall readability cleanup anyways with comments added for good measure. we |
| 05:03.28 | Notify | make the len paramter an off_t to reflect it's offset characteristic (i.e., intentionally signed), even though the vls_offset field is intentionally unsigned (unfortunate pre-c99 name). |
| 05:08.41 | *** join/#brlcad konro (~konro@41.205.22.53) | |
| 05:20.54 | *** join/#brlcad konro_ (~konro@41.205.22.53) | |
| 05:27.40 | *** join/#brlcad konro (~konro@41.205.22.53) | |
| 05:33.03 | Notify | 03BRL-CAD:brlcad * 59670 brlcad/trunk/src/libged/joint.c: convert the joint error handler that prints a ---^ errror indicator line from knowing anything about vls internals. looks like the logic that was there was actually incorrect in a number of ways (using offset for length, printing vls_str without accounting for offset, etc), so this should actually make it right too. |
| 05:37.12 | Notify | 03BRL-CAD:brlcad * 59671 (brlcad/trunk/CHANGES brlcad/trunk/include/bu.h and 7 others): remove the duplicitous bu_vls_trunc2() function in favor of bu_vls_trunc(). difference was trunc2 ignoring negative values whereas trunc treated them as offsets from the end (instead of a length). instances are trivially updated to using trunc() so just remove it wholesale as minimally impacting. |
| 05:40.47 | Notify | 03BRL-CAD:brlcad * 59672 brlcad/trunk/src/libbu/tests/bu_vls.c: meh, just do nothing |
| 05:44.45 | Notify | 03BRL-CAD:brlcad * 59673 brlcad/trunk/src/conv/step/g-step/g-step.cpp: removed unused vars |
| 06:56.20 | *** join/#brlcad konro (~konro@41.205.22.53) | |
| 07:19.54 | *** join/#brlcad archivist (~archivist@host81-149-189-98.in-addr.btopenworld.com) | |
| 07:46.18 | *** join/#brlcad luca79 (~luca@net-37-117-179-126.cust.vodafonedsl.it) | |
| 08:02.05 | *** join/#brlcad konro (~konro@41.205.22.53) | |
| 08:51.40 | *** join/#brlcad FreezingCold (~FreezingC@135.0.41.14) | |
| 09:33.59 | *** join/#brlcad konro (~konro@41.205.22.53) | |
| 11:26.17 | *** join/#brlcad Anaphaxet0n (~george@unaffiliated/anaphaxeton) | |
| 12:01.46 | *** join/#brlcad FreezingCold (~FreezingC@205.211.50.161) | |
| 12:04.15 | *** join/#brlcad d_rossberg (~rossberg@66-118-151-70.static.sagonet.net) | |
| 12:43.28 | *** join/#brlcad FOSScookie (~brian@107-200-34-31.lightspeed.tulsok.sbcglobal.net) | |
| 12:46.12 | *** join/#brlcad FreezingCold (~FreezingC@205.211.50.163) | |
| 13:43.46 | *** join/#brlcad luca79 (~luca@net-37-117-179-126.cust.vodafonedsl.it) | |
| 14:41.14 | *** join/#brlcad luca79 (~luca@net-37-117-179-126.cust.vodafonedsl.it) | |
| 17:03.38 | *** join/#brlcad gaganjyot (~gagan@125.62.99.0) | |
| 19:04.32 | *** join/#brlcad Notify (~notify@66-118-151-70.static.sagonet.net) | |
| 19:05.31 | Notify | 03BRL-CAD:n_reed * 59674 brlcad/trunk/src/libbrep/intersect.cpp: add XEventProxy class to make creation of ON_X_EVENTs more readable |
| 19:05.52 | Notify | 03BRL-CAD:brlcad * 59675 brlcad/trunk/src/other/libregex/regex.h: irix defines _OFF_T |
| 19:06.23 | Notify | 03BRL-CAD:n_reed * 59676 brlcad/trunk/src/libbrep/intersect.cpp: move overlap boundary curve test to function |
| 19:06.38 | Notify | 03BRL-CAD:r_weiss * 59677 brlcad/trunk/src/libbu/uce-dirent.h: Change to compensate for the uce-dirent.h assuming windows does not have a direct.h header. |
| 19:06.42 | Notify | 03BRL-CAD Wiki:WmRobt-USER * 0 /wiki/User:WmRobt-USER: |
| 20:03.23 | *** join/#brlcad gaganjyot (~gagan@125.62.99.0) | |
| 21:55.07 | Notify | 03BRL-CAD:starseeker * 59678 brlcad/trunk/src/libbu/tests/CMakeLists.txt: bitv-tests is a CMake file - set the extension accordingly |
| 22:02.45 | Notify | 03BRL-CAD:starseeker * 59679 brlcad/trunk/src/libbu/tests/test_internals.h: Start adding the DLL foo that Windows MSVC needs... |
| 22:07.41 | Notify | 03BRL-CAD:starseeker * 59680 brlcad/trunk/src/libbu/tests/test_internals.h: Try to match the CMake generated define. |
| 22:29.14 | *** join/#brlcad FreezingCold (~FreezingC@135.0.41.14) | |
| 23:29.56 | Notify | 03BRL-CAD:starseeker * 59681 (brlcad/trunk/src/librt/search.c brlcad/trunk/src/librt/search.h): Checkpoint some debugging work on the -below function in search - it isn't reporting a comb based on the boolean test that I would expect it to report. |