| 00:44.29 | brlcad | starseeker: I'm thinking that a simple "revert to last saved" is basically equivalent to the prior behavior |
| 00:44.45 | brlcad | that requires no specific logic |
| 00:46.32 | brlcad | ``Erik: "etags" is new?? :) |
| 00:47.19 | brlcad | oh, or maybe you mean the web-based browsing/tagging interfaces like the lxr |
| 01:21.42 | *** join/#brlcad ries (~ries@190.9.171.121) | |
| 01:33.48 | brlcad | ``Erik: also, homestarrunner updated ;) |
| 02:56.44 | *** join/#brlcad ries_nicked (~ries@190.9.171.121) | |
| 04:03.52 | *** join/#brlcad FreezingCold (~FreezingC@135.0.41.14) | |
| 04:07.09 | *** join/#brlcad FreezingCold (~FreezingC@135.0.41.14) | |
| 04:08.50 | *** join/#brlcad FreezingCold (~FreezingC@135.0.41.14) | |
| 04:09.58 | *** join/#brlcad FreezingCold (~FreezingC@135.0.41.14) | |
| 04:18.46 | *** join/#brlcad FreezingCold (~FreezingC@135.0.41.14) | |
| 04:44.19 | *** join/#brlcad hcurtis_ (b82d2950@gateway/web/freenode/ip.184.45.41.80) | |
| 04:48.16 | *** join/#brlcad Zhao_Anqing (~clouddrif@2001:da8:e000:1a08:659e:1d4a:2fcc:8d82) | |
| 05:46.23 | *** join/#brlcad FreezingCold (~FreezingC@135.0.41.14) | |
| 06:03.54 | *** join/#brlcad FreezingCold (~FreezingC@135.0.41.14) | |
| 06:04.16 | *** join/#brlcad FreezingAlt (~FreezingC@135.0.41.14) | |
| 06:09.05 | *** join/#brlcad FreezingDroid (~FreezingC@135.0.41.14) | |
| 06:36.18 | *** join/#brlcad hcurtis (b82d2950@gateway/web/freenode/ip.184.45.41.80) | |
| 07:00.37 | *** join/#brlcad d_rossberg (~rossberg@66-118-151-70.static.sagonet.net) | |
| 07:06.45 | brlcad | d_rossberg: commented on all of them and saw your notes on those of interest to you |
| 07:07.08 | brlcad | looked good to me too |
| 07:10.10 | d_rossberg | the proposals are ok - but the patches are still missing |
| 07:13.12 | brlcad | okay, will press |
| 07:18.25 | *** join/#brlcad FreezingCold (~FreezingC@135.0.41.14) | |
| 07:25.36 | *** join/#brlcad luca79 (~luca@net-37-117-82-213.cust.vodafonedsl.it) | |
| 07:40.28 | *** join/#brlcad merzo (~merzo@user-94-45-58-138-1.skif.com.ua) | |
| 08:17.56 | *** join/#brlcad richa (uid11933@gateway/web/irccloud.com/x-iqgkqeadkqetdfev) | |
| 08:23.33 | *** join/#brlcad hoiji (671b082a@gateway/web/cgi-irc/kiwiirc.com/ip.103.27.8.42) | |
| 08:25.55 | Zhao_Anqing | hi, I have submmitted a patch about NMG to sourceforge. Pls help me to review it, thx. |
| 08:39.07 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) | |
| 09:21.01 | *** join/#brlcad teepee_ (bc5c2133@gateway/web/freenode/ip.188.92.33.51) | |
| 09:32.49 | *** join/#brlcad teepee (~teepee@gateway/tor-sasl/teepee) | |
| 09:42.32 | *** join/#brlcad infinite (~infinite@14.139.122.114) | |
| 11:11.30 | *** join/#brlcad FreezingCold (~FreezingC@205.211.52.161) | |
| 11:28.45 | starseeker | brlcad: the question is when things are being saved. My impression was that any change made in the Archer edit panels is applied immediately, so there is no "last saved" to revert to |
| 11:44.54 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) | |
| 11:50.08 | Notify | 03BRL-CAD:starseeker * 60342 (brlcad/trunk/src/tclscripts/archer/Arb4EditFrame.tcl brlcad/trunk/src/tclscripts/archer/Arb5EditFrame.tcl and 2 others): All the other arbs inherit from Arb8, so just need to add the buttons to their individual panels. |
| 12:05.15 | Notify | 03BRL-CAD:starseeker * 60343 brlcad/trunk/src/tclscripts/archer/EhyEditFrame.tcl: Add Ehy revert/checkpoint support |
| 12:10.29 | *** join/#brlcad andrei__ (~IceChat77@188.26.180.58) | |
| 12:13.03 | Notify | 03BRL-CAD:starseeker * 60344 brlcad/trunk/src/tclscripts/archer/EllEditFrame.tcl: Add Ell revert/checkpoint support |
| 12:19.20 | *** join/#brlcad ries (~ries@190.9.171.121) | |
| 12:20.13 | Notify | 03BRL-CAD:starseeker * 60345 brlcad/trunk/src/tclscripts/archer/EpaEditFrame.tcl: Add Epa revert/checkpoint support |
| 12:25.56 | Notify | 03BRL-CAD:starseeker * 60346 brlcad/trunk/src/tclscripts/archer/EtoEditFrame.tcl: Add Eto revert/checkpoint support |
| 12:35.23 | *** join/#brlcad infinite (~infinite@14.139.122.114) | |
| 12:36.59 | *** join/#brlcad hcurtis (b82d2950@gateway/web/freenode/ip.184.45.41.80) | |
| 12:37.55 | infinite | hi there! the output on mged is diplayed via which files,for example, say we give rt command, then the status no of rays hitting, whether it failed or not, such information is written by which files ? |
| 12:39.26 | Notify | 03BRL-CAD:starseeker * 60347 brlcad/trunk/src/tclscripts/archer/ExtrudeEditFrame.tcl: Add Extrude revert/checkpoint support |
| 12:40.47 | starseeker | infinite: um. If you're looking for where the originating strings are stored, your best bet is to identify a subset of the string that is constant and grep for it in the source code |
| 12:46.31 | *** join/#brlcad Zhao_Anqing (~clouddrif@183.157.160.22) | |
| 12:48.26 | Notify | 03BRL-CAD:starseeker * 60348 brlcad/trunk/src/tclscripts/archer/GripEditFrame.tcl: Add Grip revert/checkpoint support |
| 12:50.17 | ``Erik | brlcad: not etags, was a standalone like cscope I thought? *shrug* I'd said "use cscope" to someone a couple years ago and you mentioned a similar tool that you thought would be better for students. imma have to look into the homestar update, it's not in my rss reader :/ |
| 12:52.34 | ``Erik | infinite: when you run rt from mged, all output goes to streams or sockets... rt writes text info to stdout and that's wired to mged using the unix pipe(2) mechanism... (I believe it even works that way on our windows build, thus the historic "nt or better") |
| 12:56.51 | *** join/#brlcad infinite (~infinite@14.139.122.114) | |
| 12:57.41 | Notify | 03BRL-CAD:starseeker * 60349 brlcad/trunk/src/tclscripts/archer/HalfEditFrame.tcl: Add Half revert/checkpoint support. There seems to be a problem rotating the half primitive. |
| 13:00.48 | *** join/#brlcad ao30002 (~ao30002@93.180.192.236) | |
| 13:04.01 | *** join/#brlcad infinite (~infinite@14.139.122.114) | |
| 13:04.31 | Notify | 03BRL-CAD:starseeker * 60350 brlcad/trunk/src/tclscripts/archer/HypEditFrame.tcl: Add Hyp revert/checkpoint support |
| 13:26.19 | Notify | 03BRL-CAD:starseeker * 60351 brlcad/trunk/src/tclscripts/archer/MetaballEditFrame.tcl: Add Metaball revert/checkpoint support |
| 13:28.02 | *** join/#brlcad ries_nicked (~ries@190.9.171.121) | |
| 13:38.21 | Notify | 03BRL-CAD:starseeker * 60352 brlcad/trunk/src/tclscripts/archer/PartEditFrame.tcl: Add Part revert/checkpoint support |
| 13:57.04 | *** join/#brlcad gaganjyot_ (~gagan@101.215.4.148) | |
| 14:02.25 | Notify | 03BRL-CAD:starseeker * 60353 brlcad/trunk/src/tclscripts/archer/PipeEditFrame.tcl: Add partial support for pipe revert/checkpoint - there's more to this one, and it doesn't look like Archer holds the full information about the pipe's current state. TODO |
| 14:19.14 | *** join/#brlcad gaganjyot_ (~gagan@101.215.4.148) | |
| 14:25.08 | Notify | 03BRL-CAD:starseeker * 60354 brlcad/trunk/src/tclscripts/archer/RhcEditFrame.tcl: Add Rhc revert/checkpoint support |
| 14:27.06 | *** join/#brlcad infinite (~infinite@14.139.122.114) | |
| 14:30.37 | Notify | 03BRL-CAD:starseeker * 60355 brlcad/trunk/src/tclscripts/archer/RpcEditFrame.tcl: Add Rpc revert/checkpoint support |
| 14:49.42 | Notify | 03BRL-CAD:starseeker * 60356 (brlcad/trunk/src/tclscripts/archer/EllEditFrame.tcl brlcad/trunk/src/tclscripts/archer/SuperellEditFrame.tcl): Tweak Ell and add support for Superell. Not sure superell editing is fully working... |
| 14:50.19 | *** part/#brlcad gaganjyot_ (~gagan@101.215.4.148) | |
| 14:56.06 | Notify | 03BRL-CAD:starseeker * 60357 brlcad/trunk/src/tclscripts/archer/TgcEditFrame.tcl: Add Tgc revert/checkpoint support |
| 14:56.08 | *** join/#brlcad infinite_ (~infinite@14.139.122.114) | |
| 14:57.39 | Notify | 03BRL-CAD:starseeker * 60358 brlcad/trunk/src/tclscripts/archer/EllEditFrame.tcl: No, should keep ell consistent. |
| 15:04.57 | Notify | 03BRL-CAD:starseeker * 60359 brlcad/trunk/src/tclscripts/archer/TorusEditFrame.tcl: Add Tor revert/checkpoint support. That's the last of the 'easy' ones - Bot, Brep, Comb, Sketch and Pipe appear to be more involved |
| 15:08.43 | *** join/#brlcad infinite_ (~infinite@14.139.122.114) | |
| 15:43.57 | *** join/#brlcad cwstirk (~charlie@c-71-56-216-45.hsd1.co.comcast.net) | |
| 16:03.19 | *** join/#brlcad FreezingCold (~FreezingC@205.211.50.162) | |
| 17:30.28 | *** join/#brlcad starseek1r (~starseeke@66-118-151-70.static.sagonet.net) | |
| 17:33.51 | *** join/#brlcad hsrai_ (~hsrai@202.164.53.116) | |
| 17:38.49 | *** join/#brlcad hoiji (671b082a@gateway/web/cgi-irc/kiwiirc.com/ip.103.27.8.42) | |
| 17:59.59 | *** join/#brlcad FreezingCold (~FreezingC@135.0.41.14) | |
| 19:09.14 | *** join/#brlcad LordOfBikes (~armin@dslb-088-066-134-078.pools.arcor-ip.net) | |
| 19:26.52 | *** join/#brlcad witness___ (uid10044@gateway/web/irccloud.com/x-snellfiysjwgakxh) | |
| 19:45.51 | *** join/#brlcad FOSScookie (~brian@107-200-34-31.lightspeed.tulsok.sbcglobal.net) | |
| 19:56.46 | *** join/#brlcad albertcoder (~albert@202.164.53.117) | |
| 20:07.43 | *** join/#brlcad gaganjyot (~gaganjyot@101.215.72.190) | |
| 20:15.35 | ``Erik | this may be the only funny april fools internet thing I've seen this year: http://lists.freebsd.org/pipermail/svn-src-head/2014-April/057249.html (new signal EMACS: editor too big) |
| 20:28.31 | albertcoder | brlcad, hello! I have read the comment on my proposal. I would be grateful if you could shed some more light on the integration of data analysis tools with materials database project. |
| 20:35.20 | *** join/#brlcad ao30002 (~ao30002@93.180.192.236) | |
| 20:54.09 | *** part/#brlcad gaganjyot (~gaganjyot@101.215.72.190) | |
| 21:27.37 | ``Erik | scratch that, the "subversion moving to git" one was funny, too O.o |
| 21:33.48 | *** join/#brlcad `ishwerdas (~gjeet@59.91.114.145) | |
| 22:23.24 | *** join/#brlcad FreezingCold (~FreezingC@135.0.41.14) | |
| 22:33.53 | Notify | 03BRL-CAD:starseeker * 60360 brlcad/trunk/TODO: Add a reminder note to merge get_eyemodel with the view command. |
| 23:12.13 | *** join/#brlcad raj12lnm (6ad889c2@gateway/web/freenode/ip.106.216.137.194) | |
| 23:12.53 | raj12lnm | hi all. |
| 23:13.10 | raj12lnm | i needed help regarding a primitive |
| 23:13.52 | raj12lnm | so basically I wanted to know from the CAD experts in the team regarding the strengths of BRLCAD in handling NURB or BREP |
| 23:14.01 | raj12lnm | I am trying to understand the process. |
| 23:15.05 | raj12lnm | Till now , with some emails exchanged with WU (GSoC student with BRLCAD in 2013) I have understood regarding the external library in use OpenNURBS |
| 23:15.43 | raj12lnm | now unlike the simple primitive nurbs don't have a straight forward way of creation. |
| 23:15.48 | raj12lnm | and so shld it be. |
| 23:16.25 | raj12lnm | by what i understand, NURB are set of equations. |
| 23:17.19 | raj12lnm | I need assistence or pointers on to finding the dependent libraries, methods used for NURBS. |
| 23:17.34 | raj12lnm | Please help in this regard. |
| 23:17.38 | raj12lnm | Thanks. :) |
| 23:18.25 | raj12lnm | ok. |
| 23:18.32 | raj12lnm | looks like people are away. |
| 23:19.21 | raj12lnm | brlcad, ``Erik, kanzure, javampire : ?? |
| 23:36.59 | raj12lnm | I think emails are best way to converse. :) |
| 23:37.19 | raj12lnm | Goodnight guys. Its like 5 am here in India, |
| 23:48.14 | *** join/#brlcad cwstirk (~charlie@c-71-56-216-45.hsd1.co.comcast.net) | |