| 00:21.02 | *** join/#brlcad FreezingCold (~FreezingC@135.0.41.14) | |
| 00:30.52 | *** join/#brlcad cwstirk (~charlie@c-71-56-216-45.hsd1.co.comcast.net) | |
| 01:10.36 | kintel | brlcad: Hey - I think we agree on the GSoC project selection and slot request for OpenSCAD. Do you need anything from us? |
| 01:44.06 | *** join/#brlcad FreezingCold (~FreezingC@135.0.41.14) | |
| 01:47.01 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) | |
| 02:01.26 | *** join/#brlcad FreezingCold (~FreezingC@135.0.41.14) | |
| 02:06.06 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) | |
| 02:28.05 | brlcad | kintel: yes, it's in the e-mail I sent -- need those willing to mentor to leave a private comment in melange |
| 04:13.21 | hcurtis | Hi, everyone. To create a patch file, I am entering "svn diff bad.c corrected.c > myPatch.patch", but the patch file it creates is empty. What am I doing wrong? |
| 04:17.56 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) | |
| 05:35.09 | *** join/#brlcad tofu_ (~sean@66-118-151-70.static.sagonet.net) | |
| 06:35.37 | *** join/#brlcad drv_ (~smuxi@dynamic-78-8-244-141.ssp.dialog.net.pl) | |
| 06:46.06 | drv_ | Hi again. Does anybody know that is written "rt_rhc_volume" function? Because it's written 2012 GCI, but I can't find this function in rhc.c. And analyze.c says that " TODO: primitives that still need implementing: (...) -rhc ". |
| 06:52.40 | *** join/#brlcad d_rossberg (~rossberg@66-118-151-70.static.sagonet.net) | |
| 07:17.49 | *** join/#brlcad merzo (~merzo@77-52-133-95.pool.ukrtel.net) | |
| 07:32.37 | *** join/#brlcad hoiji (671b082c@gateway/web/cgi-irc/kiwiirc.com/ip.103.27.8.44) | |
| 08:07.01 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) | |
| 08:35.49 | *** join/#brlcad merzo (~merzo@user-94-45-58-138-1.skif.com.ua) | |
| 09:47.46 | *** join/#brlcad albertcoder (~albert@117.210.212.122) | |
| 10:11.12 | *** join/#brlcad jasleen (~chatzilla@117.255.241.126) | |
| 10:17.19 | *** join/#brlcad gaganjyot (~gagan@27.255.252.57) | |
| 10:59.46 | *** join/#brlcad hoiji (671b082c@gateway/web/cgi-irc/kiwiirc.com/ip.103.27.8.44) | |
| 11:43.22 | *** join/#brlcad hcurtis (b82d45ca@gateway/web/freenode/ip.184.45.69.202) | |
| 11:47.28 | hcurtis | Fortunately, I was able to figure out the problem with my patch file. |
| 12:18.22 | *** join/#brlcad ries (~ries@190.9.171.121) | |
| 12:45.11 | *** join/#brlcad drv_ (~smuxi@dynamic-78-8-244-141.ssp.dialog.net.pl) | |
| 13:08.42 | *** join/#brlcad Zhao_Anqing (~clouddrif@183.157.160.27) | |
| 13:17.08 | *** join/#brlcad hoiji (671b082c@gateway/web/cgi-irc/kiwiirc.com/ip.103.27.8.44) | |
| 13:45.57 | *** join/#brlcad Anaphaxeton (~george@unaffiliated/anaphaxeton) | |
| 14:13.00 | *** join/#brlcad pandrei (~pandrei@188.26.187.72) | |
| 14:14.19 | *** join/#brlcad ries (~ries@190.9.171.121) | |
| 14:17.10 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) | |
| 14:33.27 | *** join/#brlcad Zhao_Anqing (~clouddrif@2001:da8:e000:1a08:e95f:5f08:c33:eb47) | |
| 14:38.42 | Notify | 03BRL-CAD:starseeker * 60398 brlcad/branches/openscenegraph/src/libfb/if_osg.cpp: Start trying to ease the osgViewer in as a functional component. |
| 14:57.03 | *** join/#brlcad infinite_ (~infinite@14.139.122.114) | |
| 15:01.04 | infinite_ | d_rossberg: Hi! I made the changes in nirt.c, did make install but make install is giving me this error file INSTALL cannot set permissions on "/usr/brlcad/dev-7.24.1/share/./AUTHORS" |
| 15:01.42 | brlcad | infinite_: you do not need to install to run the apps |
| 15:01.49 | brlcad | they'll be in your build tree |
| 15:01.56 | brlcad | (in the bin directory) |
| 15:02.43 | brlcad | hcurtis: glad to hear it |
| 15:03.10 | brlcad | drv_: it means that implementation from 2012 is either unreviewed or flawed |
| 15:03.36 | brlcad | so you could review it, clean it up, see if it works as described, maybe make a test case for it |
| 15:03.41 | brlcad | that would be a useful patch |
| 15:06.49 | infinite_ | brlcad: Initially, I was just doing "make" and running it but changes were not reflected, so I tried using make install |
| 15:08.33 | *** join/#brlcad infinite_ (~infinite@14.139.122.114) | |
| 15:09.31 | *** join/#brlcad todor_nikolov (~tnikolov@95.180.128.105) | |
| 15:09.56 | brlcad | infinite_: if rebuilding is successful, then you must have been doing something else wrong :) |
| 15:11.36 | todor_nikolov | Hi everyone |
| 15:12.16 | todor_nikolov | I downloaded the virtual machine and followed instructions, but I still have problems with building the program |
| 15:12.32 | brlcad | hello todor_nikolov |
| 15:14.20 | todor_nikolov | can i have some help |
| 15:14.48 | *** join/#brlcad gaganjyot (~gagan@27.255.252.57) | |
| 15:18.27 | *** join/#brlcad FreezingCold (~FreezingC@205.211.52.162) | |
| 15:20.29 | d_rossberg | infinite_: "sudo make install" would probable do it, but i'm setting the installation path to one in my home directory, e.g. "/home/rossber/bin/brlcad" |
| 15:20.37 | brlcad | todor_nikolov: sure |
| 15:20.51 | Notify | 03BRL-CAD:starseeker * 60399 brlcad/branches/openscenegraph/src/libfb/if_osg.cpp: Make a stab at creating an osg event handler that calls framebuffer updates - since nothing shows in the viewport when using a viewer currently (might have to draw to a texture and paint it on triangles for the scene graph, as opposed to the current raw opengl?) this isn't immediately useful. Checkpointing it because it does seem to |
| 15:20.54 | Notify | make the call when the event occurs. |
| 15:22.30 | d_rossberg | and i'm setting the path to /home/rossberg/bin/brlcad/bin in my login file |
| 15:22.47 | brlcad | todor_nikolov: I've heard a comment saying there is a problem, but I still have no information about what that problem is or what was tried ... so it's kind of impossible to help without more information, no? :) |
| 15:23.04 | todor_nikolov | I am building and sending the log into a file |
| 15:23.28 | todor_nikolov | Then I will upload it to pastebin |
| 15:23.31 | brlcad | you are reading the output, I hope :) |
| 15:24.02 | brlcad | build logs can seem complicated, but not when you step and read exactly what it's telling you ... useful to become experienced reading output from a build |
| 15:24.08 | brlcad | s/useful/necessary/ |
| 15:24.18 | brlcad | I'll help you decipher what's going on |
| 15:25.05 | ankesh11 | brlcad: Wanted to discuss about the issue of incorporating the Benchmark website using a MediaWiki extension. |
| 15:25.36 | ankesh11 | Would it be hard to deploy a subdomain to a mediawiki independent setup? |
| 15:26.40 | brlcad | ankesh11: not sure what you mean |
| 15:26.47 | brlcad | it's easy to create a new subdomain |
| 15:26.59 | brlcad | bench.brlcad.org or whatever |
| 15:27.00 | todor_nikolov | http://pastebin.com/X611kmp8 |
| 15:27.10 | brlcad | todor_nikolov: would you use a different pastebin? |
| 15:27.19 | brlcad | the .com is unreachable by many of our devs |
| 15:27.24 | ``Erik | ../../../lib/libtk.so.8.5: file not recognized: File truncated |
| 15:27.52 | ``Erik | something killed ld or something, remove the libtk.so.8.5 file and try building again |
| 15:28.32 | ankesh11 | That's right, I mentioned that earlier too. hsrai suggested we should deploy the benchmark website using mediawiki, as it would use the current infrastructure. I am of the opinion leveraging mediawiki would not be useful in this case. |
| 15:29.05 | *** join/#brlcad merzo (~merzo@user-94-45-58-138-1.skif.com.ua) | |
| 15:29.29 | todor_nikolov | http://paste.ubuntu.com/7217484/ |
| 15:31.06 | brlcad | ankesh11: I think you should write a proper cost-benefit matrix comparing mediawiki with laravel (or whatever) if your proposal is selected |
| 15:31.24 | todor_nikolov | It says the file does not exist |
| 15:31.27 | brlcad | I'd like to see what the tradeoffs are before deciding that bit of critical architecture |
| 15:31.48 | brlcad | todor_nikolov: it does not say that |
| 15:32.04 | todor_nikolov | rm: cannot remove `libtk.so.8.5': No such file or directory |
| 15:32.07 | brlcad | it says it DOES exist .. but that it's invalid (truncated, too short) |
| 15:32.29 | brlcad | you're issued rm on the wrong path |
| 15:32.32 | todor_nikolov | erik said to delete it, and i went in lib folder and its not there |
| 15:32.53 | brlcad | what's the full path? |
| 15:33.13 | todor_nikolov | path is ../../../lib/libtk.so.8.5 or /lib/libtk.so.8.5 |
| 15:33.13 | brlcad | notice the path is relative to that last make[1] line |
| 15:33.24 | brlcad | no and no |
| 15:33.33 | todor_nikolov | oh its inside the project |
| 15:33.39 | brlcad | the first is not a full path, it's a relative path |
| 15:33.58 | brlcad | the latter is a full path, but is not the right one (you made that up) |
| 15:34.36 | todor_nikolov | I found the file |
| 15:34.45 | todor_nikolov | its in brlcad-build/lib |
| 15:34.50 | ankesh11 | Fair enough, will try to compare their pros and cons. |
| 15:35.26 | todor_nikolov | again but this time with another lib |
| 15:36.01 | todor_nikolov | CMakeFiles/tk.dir/unix/tkUnixButton.c.o: file not recognized: File truncated |
| 15:36.32 | todor_nikolov | will removing build dir and cmake from scratch help? |
| 15:36.40 | *** join/#brlcad merzo (~merzo@user-94-45-58-138-1.skif.com.ua) | |
| 15:37.33 | ``Erik | todor_nikolov: probably |
| 15:39.19 | brlcad | todor_nikolov: it looks like you probably aborted the build at some point |
| 15:39.30 | brlcad | so yeah, starting over or running make clean is in order |
| 15:39.33 | todor_nikolov | i did that |
| 15:39.44 | brlcad | don't do that :) |
| 15:40.20 | brlcad | er, depends on what "that" is .. don't interrupt a build ;) |
| 15:40.55 | todor_nikolov | i got that :) |
| 16:15.06 | *** join/#brlcad infinite_ (~infinite@14.139.122.114) | |
| 16:27.36 | Notify | 03BRL-CAD:starseeker * 60400 brlcad/branches/openscenegraph/src/libfb/if_osg.cpp: It looks like the issue is rather more fundamental. Essentially, when we invoke the viewer, we're activating the 'this is a scene' aspect of openscenegraph and that doesn't appear to interact well with the low-level drawing calls in the framebuffer. Several options here - figure out what's going on with Tk's events, see if something a |
| 16:27.39 | Notify | bit more modern like glfw makes a better container, or map adrt's 'framebuffer is a texture on triangles' approach to the libfb framebuffer drawing. All have drawbacks, but it looks like digging deeper into Tk is what will have to happen, at least in the short run. |
| 16:29.55 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) | |
| 16:30.29 | Notify | 03BRL-CAD:starseeker * 60401 brlcad/branches/openscenegraph/src/libfb/if_osg.cpp: Fix the 'load the libs' viewer invocation - we still need that. |
| 16:33.17 | *** join/#brlcad todor_nikolov (~tnikolov@95.180.128.105) | |
| 16:52.06 | *** join/#brlcad FreezingCold (~FreezingC@205.211.52.163) | |
| 17:10.57 | todor_nikolov | Build successfull, thanks for the help |
| 17:17.18 | Notify | 03BRL-CAD:starseeker * 60402 brlcad/branches/openscenegraph/src/libfb/if_osg.cpp: Trying to see how mged+libdm remain properly drawn... looks like they do a custom event handling setup. Not exactly sure how/if that can map to the libfb api - start experimenting. |
| 17:24.04 | *** join/#brlcad gaganjyot (~gagan@27.255.252.57) | |
| 17:24.48 | *** join/#brlcad todor_nikolov (~tnikolov@95.180.128.103) | |
| 17:27.35 | *** join/#brlcad Anaphaxet0n (~george@unaffiliated/anaphaxeton) | |
| 18:52.56 | *** join/#brlcad gaganjyot (~gagan@27.255.252.57) | |
| 19:12.42 | Notify | 03BRL-CAD:starseeker * 60403 brlcad/branches/openscenegraph/src/libfb/if_osg.cpp: Even if we do customize the Tk bindings, not sure how to properly manage this - mged appears to be using a global somehow. |
| 19:38.56 | brlcad | starseeker: mged accesses the INTERP global |
| 19:40.17 | *** join/#brlcad infinite_ (~infinite@14.139.122.114) | |
| 20:03.12 | *** join/#brlcad ``Erik_ (~erik@pool-74-103-94-19.bltmmd.fios.verizon.net) | |
| 20:04.08 | *** join/#brlcad _zxq9_ (~ceverett@FL9-125-199-207-150.okn.mesh.ad.jp) | |
| 20:11.11 | *** join/#brlcad FreezingCold (~FreezingC@135.0.41.14) | |
| 20:31.51 | *** join/#brlcad hcurtis_ (4ab29c68@gateway/web/freenode/ip.74.178.156.104) | |
| 20:56.13 | *** join/#brlcad hcurtis (4ab29c68@gateway/web/freenode/ip.74.178.156.104) | |
| 20:59.44 | Notify | 03BRL-CAD:starseeker * 60404 brlcad/branches/openscenegraph/src/libfb/if_osg.cpp: Need to make sure we're set up to display. |
| 21:19.55 | *** join/#brlcad infinite_ (~infinite@14.139.122.114) | |
| 22:13.08 | *** join/#brlcad teepee (~teepee@gateway/tor-sasl/teepee) | |
| 23:06.08 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) | |
| 23:07.27 | *** join/#brlcad drv_ (~smuxi@dynamic-78-8-244-141.ssp.dialog.net.pl) | |
| 23:17.13 | *** join/#brlcad hcurtis (4ab29c68@gateway/web/freenode/ip.74.178.156.104) | |
| 23:30.45 | Notify | 03BRL-CAD:starseeker * 60405 (brlcad/branches/openscenegraph/INSTALL brlcad/branches/openscenegraph/configure and 5 others): Do some experimenting with glfw to see if it represents an improvement over Tk for this application. Not getting something quite right with the opengl view, but checkpoint testing thus far. |