| 01:03.10 | ``Erik | developer doublespeak: https://twitter.com/healthcare_dev/status/473102504952336384/photo/1 |
| 01:16.32 | *** join/#brlcad milamber (~devlin@d118-75-244-176.try.wideopenwest.com) | |
| 01:18.21 | *** join/#brlcad KimK (~Kim__@ip68-102-30-143.ks.ok.cox.net) | |
| 01:25.26 | *** join/#brlcad hcurtis (b82d1ab1@gateway/web/freenode/ip.184.45.26.177) | |
| 01:25.50 | hcurtis | brlcad: Hi, Sean. |
| 02:27.02 | brlcad | maths22: awesome, thanks! |
| 02:27.21 | brlcad | maths22: any problems encountered or was the upgrade pretty straightforward? |
| 02:55.39 | hcurtis | brlcad: The GSoC expectations list talked about an interaction schedule. Do you think we need to set one up, or do you like how we're doing things now? |
| 03:01.16 | Notify | 03BRL-CAD:brlcad * 61054 brlcad/trunk/ChangeLog: merge all of the commits going into the 7.24.2 release, through r57446 plus cherry picking most of the release branch revisions that were documented in the trunk commit log messages. next release should pick up from r57446 instead of by date. |
| 03:05.16 | Notify | 03BRL-CAD:brlcad * 61055 (brlcad/branches/RELEASE/ChangeLog Property Changed: and 10 others): merge trunk c61054 to get the updated ChangeLog for release. next release should use this revision instead of the usual date range due to having to cherry-pick so many subsequent merges. |
| 03:08.06 | Notify | 03BRL-CAD:brlcad * 61056 brlcad/trunk/HACKING: keep a note for the next release (not valid syntax) that we need to merge from a specific revision that overlaps date-wise |
| 03:09.57 | Notify | 03BRL-CAD:brlcad * 61057 brlcad/branches/RELEASE/NEWS: looking like today is finally release day. |
| 03:16.52 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) | |
| 03:28.08 | hcurtis | Update: I've been reading the install file and the Contributors' Guide to BRL-CAD. |
| 03:32.32 | *** join/#brlcad teepee (~teepee@gateway/tor-sasl/teepee) | |
| 03:33.56 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) | |
| 03:40.17 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) | |
| 03:53.57 | brlcad | hcurtis: asking you to report your progress/activity regularly here was setting up an interaction schedule |
| 03:54.31 | hcurtis | Ok |
| 03:55.22 | hcurtis | Do you like the way I'm doing it? |
| 03:56.14 | hcurtis | By the way, congratulations on the new release. |
| 03:57.52 | brlcad | like the way you're doing what? |
| 03:58.25 | brlcad | your update messages here have been fine |
| 03:59.19 | brlcad | only critique is that they're somewhat non-progressive reports/activity, and non-technical |
| 04:01.16 | Notify | 03BRL-CAD:brlcad * 61058 (brlcad/branches/STABLE/AUTHORS brlcad/branches/STABLE/BUGS and 926 others): merge RELEASE branch from r55757 to HEAD, making this the final release sources for 7.24.2 |
| 04:06.10 | hcurtis | Ok. I've been trying to answer my questions on my own, and I'm often able to. Maybe that's why there aren't more technical questions. |
| 04:09.10 | Notify | 03BRL-CAD Wiki:Patrickhead * 0 /wiki/User:Patrickhead: |
| 04:15.04 | hcurtis | brlcad: Would you like me to finish the libbu task (making my dynamic allocation program work using BRL-CAD functions) before I work again on fast4-g, or does it not matter to you which one I get done first? |
| 04:29.24 | brlcad | the libbu task was to help you with understanding fast4-g just a little better |
| 04:29.51 | brlcad | basically, it's a task that shows how compiling occurs |
| 04:30.39 | brlcad | not strictly necessary for the fast4-g task because that's already set up within our build system |
| 04:31.18 | brlcad | but it is a fundamental understanding that is expected of devs |
| 04:33.21 | hcurtis | Ok |
| 04:35.24 | hcurtis | brlcad: I'll get the libbu task done first. |
| 04:37.46 | brlcad | just so you know, given an entire week has passed and those were the objectives for the week prior, we're quickly approaching a point of having to change direction entirely and rediscuss |
| 04:38.30 | brlcad | just keep doing the best you can, know you've been working hard |
| 04:42.35 | hcurtis | brlcad: I appreciate your advice and your patience. Also, I'm completely open to your suggestions about a possible change in direction and such. |
| 05:01.50 | *** join/#brlcad piyushparkash (~piyushpar@202.164.53.117) | |
| 05:45.12 | *** join/#brlcad teepee (~teepee@gateway/tor-sasl/teepee) | |
| 05:47.31 | *** join/#brlcad KimK (~Kim__@ip68-102-30-143.ks.ok.cox.net) | |
| 06:36.15 | Notify | 03BRL-CAD Wiki:Hcurtis0010 * 7186 /wiki/User:Hcurtis0010/GSoC2014/logs: /* Week 2 */ |
| 08:00.21 | *** join/#brlcad piyushparkash (~piyushpar@202.164.53.117) | |
| 08:35.24 | *** join/#brlcad KimK (~Kim__@ip68-102-30-143.ks.ok.cox.net) | |
| 08:37.18 | *** join/#brlcad caen23 (~caen23@92.83.166.162) | |
| 08:58.03 | *** join/#brlcad teepee- (bc5c2133@gateway/web/freenode/ip.188.92.33.51) | |
| 09:51.10 | *** join/#brlcad piyushparkash (~piyushpar@202.164.53.117) | |
| 10:24.54 | Notify | 03BRL-CAD:tbrowder2 * 61059 (brlcad/branches/d-binding/misc/d-bindings/README.txt =================================================================== and 39 others): rename to clarify contents |
| 10:56.22 | *** join/#brlcad vladbogo (~vlad@188.27.64.224) | |
| 11:54.09 | maths22 | brlcad: the upgrade was very straightforward |
| 12:02.06 | *** join/#brlcad teepee- (bc5c2133@gateway/web/freenode/ip.188.92.33.51) | |
| 12:21.58 | Notify | 03BRL-CAD:tbrowder2 * 61060 brlcad/branches/d-binding/misc/d-bindings/extract-grammar.pl: reading grammar mostly ok but one issue remains (plus minor formatting differences): WHILE is being missed |
| 12:35.46 | brlcad | awesome |
| 12:35.58 | brlcad | shame there's not a good way to automate that |
| 12:43.57 | *** join/#brlcad luca79 (~luca@net-37-116-122-253.cust.vodafonedsl.it) | |
| 13:20.15 | *** join/#brlcad kesha (~kesha@14.139.122.114) | |
| 13:26.07 | caen23 | quit |
| 13:26.30 | *** join/#brlcad caen23 (~caen23@92.83.166.162) | |
| 13:37.11 | *** join/#brlcad raj12lnm (31cd6b50@gateway/web/freenode/ip.49.205.107.80) | |
| 13:44.09 | *** join/#brlcad ries (~ries@190.9.171.121) | |
| 14:04.22 | *** join/#brlcad teepee- (bc5c2133@gateway/web/freenode/ip.188.92.33.51) | |
| 14:34.46 | *** join/#brlcad teepee- (bc5c2133@gateway/web/freenode/ip.188.92.33.51) | |
| 14:42.31 | Notify | 03BRL-CAD:tbrowder2 * 61061 brlcad/branches/d-binding/misc/d-bindings/c-grammar.txt: replace leading spaces with tabs for ease of reproducing |
| 14:49.54 | Notify | 03BRL-CAD:tbrowder2 * 61062 brlcad/branches/d-binding/misc/d-bindings/c-grammar.txt: restore spaces for the productions in CAPS |
| 14:50.37 | Notify | 03BRL-CAD:brlcad * 61063 (brlcad/branches/RELEASE/NEWS brlcad/branches/RELEASE/TODO and 5 others): final version bump and doc update for 7.24.2 release |
| 14:54.01 | Notify | 03BRL-CAD:brlcad * 61064 (brlcad/branches/STABLE/NEWS brlcad/branches/STABLE/TODO and 16 others): merge c61063 from RELEASE to get the remaining version bump and doc updates, should have been in prior merge |
| 15:29.27 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) | |
| 15:31.01 | *** join/#brlcad milamber (~devlin@d118-75-244-176.try.wideopenwest.com) | |
| 15:39.14 | Notify | 03BRL-CAD:starseeker * 61065 (brlcad/trunk/src/other/stepcode/src/clstepcore/instmgr.cc brlcad/trunk/src/other/stepcode/src/clstepcore/instmgr.h): The insertion mechanism for the sortedMaster array performed very badly in the case where a large file has a batch of low-id-number entities towards the end of the file. Tossing in std::map in place of that array avoids the bad corner case, but we may pay a performance |
| 15:39.16 | Notify | penalty in other situations - depending on what the bottle necks are, this may be work revisiting. For now, this seems to work well enough. |
| 15:44.08 | *** join/#brlcad oana_ (~elf11@p5.eregie.pub.ro) | |
| 15:48.58 | Notify | 03BRL-CAD Wiki:ChasewiiohuoowrWeniger * 0 /wiki/User:ChasewiiohuoowrWeniger: |
| 16:02.40 | *** join/#brlcad clock (~clock@84-72-11-5.dclient.hispeed.ch) | |
| 16:54.39 | Notify | 03BRL-CAD:brlcad * 61066 NIL: Tagging release 7.24.2 |
| 17:00.54 | ``Erik | woohoo! |
| 17:17.08 | Notify | 03BRL-CAD Wiki:Sudstoit24 * 0 /wiki/User:Sudstoit24: |
| 17:20.40 | *** join/#brlcad devinder (~chatzilla@202.164.53.117) | |
| 17:26.18 | *** join/#brlcad cwstirk (~charlie@c-107-2-138-189.hsd1.co.comcast.net) | |
| 17:42.09 | ``Erik | yuh oh, wwdc is asploding the interwebz |
| 17:55.24 | Notify | 03BRL-CAD:tbrowder2 * 61067 brlcad/branches/d-binding/misc/d-bindings/extract-grammar.pl: issues still open |
| 17:59.15 | *** join/#brlcad raj12lnm (31cd6b50@gateway/web/freenode/ip.49.205.107.80) | |
| 17:59.21 | raj12lnm | hi all. |
| 17:59.31 | raj12lnm | did you see my patches on sf ? |
| 18:02.22 | Notify | 03BRL-CAD Wiki:Albertcoder * 7187 /wiki/User:Albertcoder/GSoC2014/logs: /* Week 2 */ |
| 18:13.38 | brlcad | raj12lnm: the patches get updated when someone works them |
| 18:15.52 | brlcad | notifications are sent out every change too |
| 18:15.54 | raj12lnm | brlcad: ok |
| 18:16.03 | raj12lnm | brlcad : one more quick question |
| 18:16.08 | raj12lnm | if you are free |
| 18:16.56 | raj12lnm | can we change the argument in metaball definition : as fastf_t *vert[5] to fastf_t **vert ? |
| 18:17.06 | brlcad | ``Erik: thanks, didn't realize that was today .. maybe there will finally be a macbook pro update |
| 18:17.10 | brlcad | likes http://buyersguide.macrumors.com/#Mac |
| 18:18.25 | brlcad | raj12lnm: possibly, but have to inspect all the places it's used .. memory allocation issues |
| 18:18.29 | brlcad | raj12lnm: why? |
| 18:18.45 | raj12lnm | i think that provides a standard |
| 18:19.14 | raj12lnm | and i just tested it compiles perfectly alright if one makes that change |
| 18:19.32 | brlcad | compiling isn't the issue :) |
| 18:20.43 | raj12lnm | brlcad : the uses are also matching |
| 18:20.45 | raj12lnm | for instance |
| 18:21.14 | raj12lnm | <PROTECTED> |
| 18:21.18 | brlcad | compiling just means it's type-compatible with how it's being used and that's what I would expect |
| 18:22.03 | raj12lnm | so in that case as i found the uses, there must not be any issue changing it |
| 18:22.06 | brlcad | if the structure has a pointer to a pointer, then the calling locations need to allocate that array |
| 18:22.18 | raj12lnm | can u change it in the repo ? A quick commit from your side :) |
| 18:22.26 | brlcad | raj12lnm: you're not understanding |
| 18:23.25 | raj12lnm | brlcad : tell me then |
| 18:23.38 | raj12lnm | the only pace it used is proc-db/metaball.c |
| 18:24.05 | raj12lnm | also in that place the callee function allocates the variable whihc is in consistent with the desired changes |
| 18:29.20 | brlcad | raj12lnm: which metaball definition are you referring to? the one in include/rtgeom.h has no such array and that's what I presumed you were referring to (that IS the metaball definition) |
| 18:29.36 | Notify | 03BRL-CAD:tbrowder2 * 61068 brlcad/branches/d-binding/misc/d-bindings/extract-grammar.pl: whew, formatting issues solved, still no WHILE |
| 18:30.08 | raj12lnm | brlcad : yes, metaball structure doesnt contain that |
| 18:30.15 | raj12lnm | mk_metaball has that |
| 18:30.26 | raj12lnm | which is a function in libwdb.h |
| 18:30.39 | raj12lnm | and defined in src/libwdb/metaball.c |
| 18:31.44 | brlcad | ahhh, THAT is different |
| 18:32.12 | brlcad | clarity, it's a good thing |
| 18:35.46 | raj12lnm | ok! So what do you think about that ? |
| 18:36.57 | raj12lnm | brlcad: |
| 18:37.26 | *** join/#brlcad cstirk (~charlie@c-107-2-138-189.hsd1.co.comcast.net) | |
| 18:37.37 | *** join/#brlcad teepee (~teepee@gateway/tor-sasl/teepee) | |
| 18:40.51 | brlcad | raj12lnm: yeah, a function definition is certainly more easily changed than a structure definition |
| 18:41.05 | brlcad | there may be some external callers, but a function sig change is compatible |
| 18:41.28 | brlcad | so back to the original question, why? |
| 18:41.31 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) | |
| 18:41.50 | brlcad | "provides a standard" doesn't really explain why |
| 18:43.11 | raj12lnm | in the ars we have a two dimension array |
| 18:43.20 | raj12lnm | although it is required there |
| 18:43.35 | raj12lnm | but if we have a 2-D array i think it is easire |
| 18:43.43 | raj12lnm | but the current is not hard either :) |
| 18:44.07 | raj12lnm | easire as in to wrap in different languages |
| 18:44.12 | raj12lnm | like python wrapping |
| 18:44.29 | raj12lnm | but as i said the current is not very-hard either |
| 18:47.30 | brlcad | raj12lnm: go ahead and make the change and submit it as a patch (including all/any callers) |
| 18:48.42 | Notify | 03BRL-CAD:tbrowder2 * 61069 brlcad/branches/d-binding/misc/d-bindings/extract-grammar.pl: now all issues are solved--reads and writes grammar correctly |
| 18:48.49 | raj12lnm | ok. I will do them. |
| 18:50.58 | brlcad | <PROTECTED> |
| 19:05.57 | raj12lnm | brlcad : I will find other good opertunities to submit the patch. |
| 19:06.23 | raj12lnm | I think since there is already a back log of patches. If you do the required change tht will be good :) |
| 19:18.36 | *** join/#brlcad piyushparkash (~piyushpar@202.164.53.117) | |
| 19:45.15 | Notify | 03BRL-CAD Wiki:Ankeshanand * 7188 /wiki/User:Ankeshanand/GSoC14/logs: /* Update logs for 2nd June */ |
| 19:52.57 | *** join/#brlcad vladbogo (~vlad@188.27.64.224) | |
| 20:04.02 | Notify | 03BRL-CAD:tbrowder2 * 61070 brlcad/branches/d-binding/misc/d-bindings/extract-grammar.pl: correct comment |
| 20:05.35 | Notify | 03BRL-CAD Wiki:Vladbogolin * 7189 /wiki/User:Vladbogolin/GSoC2014/Logs: /* Week 2 */ |
| 20:11.19 | Notify | 03BRL-CAD:carlmoore * 61071 brlcad/trunk/ChangeLog: ONLY remove trailing blanks/tabs (review of jobs shown at this end shows I do NOT check that file's spellings |
| 20:18.01 | *** join/#brlcad devinder (~chatzilla@202.164.53.117) | |
| 20:39.01 | Notify | 03BRL-CAD Wiki:Ankeshanand * 7190 /wiki/User:Ankeshanand/GSoC14/logs: /* Week 3 */ |
| 20:39.14 | Notify | 03BRL-CAD:carlmoore * 61072 brlcad/trunk/doc/docbook/system/man1/en/g-vrml.xml: provide -b and -e explanation in g-vrml |
| 21:04.57 | Notify | 03BRL-CAD:carlmoore * 61073 brlcad/trunk/doc/docbook/system/man1/en/g-x3d.xml: g-x3d manpage fixes: supply a space before an ending period, and explain -P |
| 21:20.34 | *** join/#brlcad impulse (~impulse@TOROON4828W-LP140-02-2925027964.dsl.bell.ca) | |
| 21:24.14 | *** join/#brlcad stirk (~charlie@c-107-2-138-189.hsd1.co.comcast.net) | |
| 21:27.26 | *** join/#brlcad cwstirk (~charlie@c-24-9-78-79.hsd1.co.comcast.net) | |
| 21:39.40 | starseeker | this is kind of interesting looking: http://msharov.github.io/ustl/ |
| 21:51.17 | *** join/#brlcad FreezingCold (~FreezingC@135.0.41.14) | |
| 23:56.46 | *** join/#brlcad cwstirk (~charlie@c-107-2-138-189.hsd1.co.comcast.net) | |