| 00:20.44 | *** join/#brlcad clock (~clock@84-72-11-5.dclient.hispeed.ch) | |
| 00:47.17 | starseeker | brlcad: is there some trick to mat_t/matp_t? |
| 00:47.29 | starseeker | is freeing everything in sight... |
| 00:54.14 | *** join/#brlcad ries_ (~ries@190.9.171.121) | |
| 01:17.05 | Notify | 03BRL-CAD:starseeker * 61256 brlcad/branches/openscenegraph/src/libdm/osg-test.cpp: Might as well note that these don't improve the FPS... |
| 01:29.21 | *** join/#brlcad ries (~ries@190.9.171.121) | |
| 01:45.35 | *** join/#brlcad Zhao_Anqing (~clouddrif@183.157.160.28) | |
| 01:50.54 | *** join/#brlcad archivist (~archivist@host81-149-189-98.in-addr.btopenworld.com) | |
| 02:00.08 | *** join/#brlcad Zhao_Anqing (~clouddrif@183.157.160.8) | |
| 02:24.29 | hcurtis | Update: I am working on fast4-g. My thinking, planning, and researching are winding down, and I am coding. |
| 03:04.02 | *** join/#brlcad ejno (~ejno@unaffiliated/kazaik) | |
| 04:56.45 | *** join/#brlcad piyushparkash (~piyushpar@117.214.223.18) | |
| 06:01.03 | Notify | 03BRL-CAD Wiki:49.205.107.80 * 7259 /wiki/User:Krajkreddy/GSOC14/summary: /* Week3 */ |
| 06:16.22 | *** join/#brlcad albertcoder (~albertcod@202.164.53.117) | |
| 06:48.55 | *** join/#brlcad ishwerdas (~ishwerdas@59.91.113.96) | |
| 06:54.47 | *** join/#brlcad oana_ (~oana@188.209.97.130) | |
| 06:57.17 | *** join/#brlcad piyushparkash (~piyushpar@117.205.64.70) | |
| 07:27.36 | *** join/#brlcad KimK (~Kim__@ip68-102-30-143.ks.ok.cox.net) | |
| 08:40.27 | *** join/#brlcad merzo (~merzo@user-94-45-58-138-1.skif.com.ua) | |
| 08:47.06 | *** join/#brlcad archivist (~archivist@host81-149-189-98.in-addr.btopenworld.com) | |
| 08:48.45 | *** join/#brlcad alisha (~alisha@202.164.53.117) | |
| 08:53.50 | Notify | 03BRL-CAD:indianlarry * 61257 (brlcad/trunk/include/brep.h brlcad/trunk/src/libbrep/PullbackCurve.cpp and 3 others): Added additional tolerance to surface_GetClosestPoint3dFirstOrder() and trim_GetClosestPoint3dFirstOrder(), parameter "same_point_tol" is used to stop the solver and return true when it gets to a solution within this tolerance, parameter within_distance_tol" is used to return true if the closest |
| 08:53.52 | Notify | solution found is within this tolerance (meaning we couldn't find anything closer but we will settle for this). Also added a tolerance to ConsecutivePointsCrossClosedSeam() which is the tolerance used for the IsAtSeam() check. Added rendition of surface_GetIntervalMinMaxDistance() which takes as input the bounding box instead of the surface and interval to be used when caching the bounding boxes. Added addition logic |
| 08:53.54 | Notify | to resolve curve loop ambiguities when point lies on a seam or singularity looking at both previous and next points along loop. |
| 08:54.49 | *** join/#brlcad mihaineacsu (~mihaineac@92.85.193.175) | |
| 09:11.19 | *** join/#brlcad pandrei (~pandrei@188.25.172.182) | |
| 09:15.36 | *** join/#brlcad teepee- (bc5c2133@gateway/web/freenode/ip.188.92.33.51) | |
| 09:20.17 | *** join/#brlcad piyushparkash (~piyushpar@117.205.64.70) | |
| 09:37.13 | *** join/#brlcad teepee_ (bc5c2133@gateway/web/freenode/ip.188.92.33.51) | |
| 09:44.32 | Notify | 03BRL-CAD:indianlarry * 61258 brlcad/trunk/src/libbrep/PullbackCurve.h: tighten PBC_SEAM_TOL from 0.01 to 0.001 |
| 09:52.21 | *** join/#brlcad vladbogo (~vlad@195.216.218.10) | |
| 09:55.06 | *** join/#brlcad merzo (~merzo@user-94-45-58-138-1.skif.com.ua) | |
| 09:55.21 | *** join/#brlcad jordisayol (~jordisayo@unaffiliated/jordisayol) | |
| 10:09.39 | Notify | 03BRL-CAD:indianlarry * 61259 brlcad/trunk/src/librt/primitives/brep/brep_debug.cpp: Added new 'brep' sub-command 'UV' to draw 3d bounding box from input UV intervals:command - brep somebrep.s plot UV surface_index u1 u2 v1 v2mged> brep brep.s1 plot 0 1 5 0 10Can also be used to draw 3d iso of U or V by forcing one or the other to same value:V iso at v=5 - brep brep.s1 plot 0 0 6 5 5Also added plot usage for 'UV' |
| 10:09.41 | Notify | and missing 'Suv' sub-commands. |
| 10:16.19 | *** join/#brlcad albertcoder (~albertcod@202.164.53.117) | |
| 10:18.19 | Notify | 03BRL-CAD:indianlarry * 61260 brlcad/trunk/src/librt/primitives/brep/brep.cpp: Updated logic for shifting loops that straddle a closed seam. |
| 10:25.27 | Notify | 03BRL-CAD:indianlarry * 61261 brlcad/trunk/src/librt/primitives/brep/brep.cpp: When building trim polygon and encounter singularity we need to bridge with a UV line. Added logic to make sure bridge is connected in the right direction CW or CCW depending on the loop and which side of the UV the singularity is on. |
| 10:29.45 | *** join/#brlcad Zhao_Anqing (~clouddrif@183.157.160.17) | |
| 10:38.02 | *** join/#brlcad albertcoder (~albertcod@202.164.53.117) | |
| 10:51.56 | *** join/#brlcad pandrei (~pandrei@188.25.172.182) | |
| 11:12.07 | *** part/#brlcad piyushparkash (~piyushpar@117.205.64.70) | |
| 11:24.27 | Notify | 03BRL-CAD:tbrowder2 * 61262 brlcad/branches/d-binding/misc/d-bindings/F.pm: add another shared function; format |
| 11:25.26 | Notify | 03BRL-CAD:tbrowder2 * 61263 brlcad/branches/d-binding/misc/d-bindings/test_hdr.h: add somw more test objects |
| 11:28.25 | *** join/#brlcad teepee_ (bc5c2133@gateway/web/freenode/ip.188.92.33.51) | |
| 11:32.44 | Notify | 03BRL-CAD Wiki:Popescu.andrei1991 * 7260 /wiki/User:Popescu.andrei1991/devlogs2014: /* Week 4 */ |
| 11:48.49 | *** join/#brlcad merzo (~merzo@user-94-45-58-138-1.skif.com.ua) | |
| 11:57.50 | *** join/#brlcad teepee (~teepee@gateway/tor-sasl/teepee) | |
| 12:17.53 | Notify | 03BRL-CAD:tbrowder2 * 61264 brlcad/branches/d-binding/misc/d-bindings/F.pm: typo |
| 12:20.01 | Notify | 03BRL-CAD:tbrowder2 * 61265 brlcad/branches/d-binding/misc/d-bindings/D.pm: reset name hash for every input file (each is a separate D module with its own namespace) |
| 12:22.03 | Notify | 03BRL-CAD:tbrowder2 * 61266 brlcad/branches/d-binding/misc/d-bindings/HObj.pm: rethink conversion function; use power of regexes |
| 12:27.03 | *** join/#brlcad ries (~ries@190.9.171.121) | |
| 12:32.15 | *** join/#brlcad vladbogo (~vlad@195.216.218.10) | |
| 12:38.36 | *** join/#brlcad clock (~clock@84-72-11-5.dclient.hispeed.ch) | |
| 12:42.40 | *** join/#brlcad vladbogo (~vlad@195.216.218.10) | |
| 12:44.10 | *** join/#brlcad vladbogo (~vlad@195.216.218.10) | |
| 13:04.45 | *** join/#brlcad teepee- (bc5c2133@gateway/web/freenode/ip.188.92.33.51) | |
| 13:27.42 | *** join/#brlcad piyushparkash (~piyushpar@117.205.64.70) | |
| 13:28.05 | Notify | 03BRL-CAD:bob1961 * 61267 (brlcad/trunk/include/bu/cmd.h brlcad/trunk/src/libbrep/PullbackCurve.cpp): Mods for compiling on Windows. |
| 13:34.51 | Notify | 03BRL-CAD:tbrowder2 * 61268 brlcad/branches/d-binding/misc/d-bindings/HObj.pm: start refactoring conversion code back into its own subroutine; put regexes in their own module |
| 13:47.20 | Notify | 03BRL-CAD:starseeker * 61269 brlcad/branches/openscenegraph/src/libdm/osg-test.cpp: The optimizer helps improve FPS. |
| 14:17.19 | Notify | 03BRL-CAD:tbrowder2 * 61270 brlcad/branches/d-binding/misc/d-bindings/R.pm: correct typo |
| 14:20.31 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) | |
| 14:30.01 | *** join/#brlcad teepee- (bc5c2133@gateway/web/freenode/ip.188.92.33.51) | |
| 14:33.53 | *** join/#brlcad KimK (~Kim__@ip68-102-30-143.ks.ok.cox.net) | |
| 14:34.00 | *** join/#brlcad vladbogo (~vlad@195.216.218.10) | |
| 15:14.58 | *** join/#brlcad teepee- (bc5c2133@gateway/web/freenode/ip.188.92.33.51) | |
| 15:16.02 | *** join/#brlcad piyushparkash (~piyushpar@117.205.64.70) | |
| 15:33.19 | ``Erik | supposedly, there's a 2.5t army truck in this picture: http://cheezburger.com/8219217664 |
| 15:34.19 | clock | ``Erik, I could find it in the picture! |
| 15:43.48 | Notify | 03BRL-CAD:indianlarry * 61271 (brlcad/trunk/src/conv/step/step-g/GeometricallyBoundedSurfaceShapeRepresentation.cpp =================================================================== and 111 others): Newly supported STEP AP203 types. |
| 15:46.09 | Notify | 03BRL-CAD:indianlarry * 61272 brlcad/trunk/src/conv/step/step-g/BSplineSurface.cpp: Added code to destructor to cleanup list of control points. |
| 15:54.23 | *** join/#brlcad teepee- (bc5c2133@gateway/web/freenode/ip.188.92.33.51) | |
| 16:02.38 | Notify | 03BRL-CAD:indianlarry * 61273 brlcad/trunk/src/conv/step/step-g/step-g.cpp: Output timings for SCL to load and step-g to convert. |
| 16:38.12 | *** join/#brlcad alisha (~alisha@101.59.122.92) | |
| 16:57.18 | *** join/#brlcad ishwerdas (~ishwerdas@59.91.238.171) | |
| 17:22.10 | *** join/#brlcad KimK (~Kim__@ip68-102-30-143.ks.ok.cox.net) | |
| 17:27.51 | Notify | 03BRL-CAD:indianlarry * 61274 brlcad/trunk/src/conv/step/step-g/ConnectedFaceSet.cpp: Changed debugging CPP symbol to _DEBUG_TESTING_ and modified debug code slightly to include static variable that I can modify while debugging. Just a common place I come back to when debugging. |
| 17:33.49 | *** join/#brlcad piyushparkash (~piyushpar@117.205.64.70) | |
| 17:37.17 | *** join/#brlcad albertcoder (~albertcod@117.234.185.26) | |
| 17:46.23 | Notify | 03BRL-CAD:tbrowder2 * 61275 brlcad/branches/d-binding/misc/d-bindings/HObj.pm: organize D conversion processing cleaner; factor out some debug code into a separate function |
| 17:55.58 | Notify | 03BRL-CAD:tbrowder2 * 61276 brlcad/branches/d-binding/misc/d-bindings/HObj.pm: in the output D file report which C objects actually needed conversion |
| 17:56.38 | *** join/#brlcad piyushparkash (~piyushpar@117.205.64.70) | |
| 17:58.55 | *** join/#brlcad alisha (~alisha@101.58.210.157) | |
| 18:07.49 | Notify | 03BRL-CAD:indianlarry * 61277 brlcad/trunk/src/conv/step/step-g/ContextDependentShapeRepresentation.cpp: Fixed for case where we don't have a complex type and just have a single Shape_Representation_Relationship entity. |
| 18:11.18 | Notify | 03BRL-CAD:tbrowder2 * 61278 brlcad/branches/d-binding/misc/d-bindings/D.pm: add a bit more reporting info (need to return number of objects from the final conversion functio to do that); simplify some code |
| 18:38.34 | *** join/#brlcad vladbogo (~vlad@86.127.153.90) | |
| 18:44.52 | Notify | 03BRL-CAD:indianlarry * 61279 (brlcad/trunk/src/conv/step/STEPWrapper.cpp brlcad/trunk/src/conv/step/STEPWrapper.h): Added additional component name maps so converter checks to see if name already used. If name already used extends the name with an incrementing index until it finds an un-used name. Also added call to Factory::DeleteObjects() to cleanup after each object loaded and written to database. |
| 18:45.25 | Notify | 03BRL-CAD:vladbogo * 61280 brlcad/trunk/src/libfb/if_qt.cpp: Allocated the backing store for the framebufer. |
| 18:48.05 | *** join/#brlcad KimK (~Kim__@ip68-102-30-143.ks.ok.cox.net) | |
| 18:48.19 | *** join/#brlcad vladbogo (~vlad@86.127.153.90) | |
| 18:52.03 | Notify | 03BRL-CAD:tbrowder2 * 61281 brlcad/branches/d-binding/misc/d-bindings/G.pm: add NULL to the conversion map |
| 18:54.37 | Notify | 03BRL-CAD Wiki:Inderpreet * 7261 /wiki/User:Inderpreet/GSoC14/logs: /* Week 4 */ |
| 18:57.05 | Notify | 03BRL-CAD:tbrowder2 * 61282 brlcad/branches/d-binding/misc/d-bindings/G.pm: take it away for now because preprocessing should have rewritten it to some other form--it will take a more complex regex |
| 19:03.15 | *** join/#brlcad raj12lnm (uid35020@gateway/web/irccloud.com/x-tlkrxfoukexpaqlc) | |
| 19:21.03 | Notify | 03BRL-CAD:tbrowder2 * 61283 brlcad/branches/d-binding/misc/d-bindings/R.pm: first stab at a null detector regex |
| 19:21.50 | *** join/#brlcad andrei_ (~IceChat77@188.25.172.182) | |
| 19:22.11 | Notify | 03BRL-CAD:tbrowder2 * 61284 brlcad/branches/d-binding/misc/d-bindings/HObj.pm: hopefully not bragging too soon |
| 19:22.14 | andrei_ | ~seen d_rossberg |
| 19:22.19 | infobot | d_rossberg <~rossberg@66-118-151-70.static.sagonet.net> was last seen on IRC in channel #brlcad, 5d 4h 13m 48s ago, saying: 'i've to leave soon'. |
| 19:45.28 | Notify | 03BRL-CAD Wiki:Albertcoder * 7262 /wiki/User:Albertcoder/GSoC2014/logs: /* Week 4 */ |
| 20:10.34 | Notify | 03BRL-CAD:tbrowder2 * 61285 brlcad/branches/d-binding/misc/d-bindings/R.pm: oops, forgot the asterisks (duh) |
| 20:24.26 | Notify | 03BRL-CAD:starseeker * 61286 brlcad/branches/openscenegraph/src/libdm/osg-test.cpp: doesn't matter, so no need to change the setting. |
| 20:28.47 | Notify | 03BRL-CAD:starseeker * 61287 (brlcad/branches/openscenegraph/TODO brlcad/branches/openscenegraph/doc/docbook/system/man1/en/irdisp.xml and 21 others): Sync osg with trunk through r61286 |
| 20:28.53 | Notify | 03BRL-CAD Wiki:Vladbogolin * 0 /wiki/File:FirstDraw.png: |
| 20:32.55 | Notify | 03BRL-CAD Wiki:Vladbogolin * 7264 /wiki/User:Vladbogolin/GSoC2014/Logs: /* Week 4 */ |
| 20:33.37 | Notify | 03BRL-CAD:starseeker * 61288 (brlcad/branches/bullet/doc/docbook/system/man1/en/irdisp.xml brlcad/branches/bullet/doc/docbook/system/man1/en/lgt.xml and 20 others): Sync bullet with trunk up to r61287 |
| 20:56.27 | vladbogo | hi all |
| 20:57.43 | vladbogo | while uploading an image to the wiki I've noticed that creation of the thumbnail fails because /usr/bin/convert is missing |
| 21:14.40 | Notify | 03BRL-CAD:tbrowder2 * 61289 brlcad/branches/d-binding/misc/d-bindings/HObj.pm: correct D form (null is a value, not a type) |
| 21:44.01 | *** join/#brlcad caen23 (~caen23@92.83.166.162) | |
| 21:47.58 | Notify | 03BRL-CAD:tbrowder2 * 61290 brlcad/branches/d-binding/misc/d-bindings/test_hdr.h: add more test cases |
| 22:02.56 | *** join/#brlcad FreezingCold (~FreezingC@135.0.41.14) | |
| 23:00.30 | Notify | 03BRL-CAD Wiki:Ankeshanand * 7265 /wiki/User:Ankeshanand/GSoC14/logs: /* Update logs */ |