| 00:17.51 | Notify | 03BRL-CAD:starseeker * 61443 brlcad/branches/openscenegraph/src/libdm/osg-test.cpp: Not actually fully working yet (havoc looks wrong) but start setting up to assemble vlists for regions. |
| 00:21.19 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) | |
| 00:21.41 | *** join/#brlcad maths22 (~maths22@66-118-151-70.static.sagonet.net) | |
| 00:22.27 | *** join/#brlcad starseeker (~starseeke@66-118-151-70.static.sagonet.net) | |
| 00:30.52 | Notify | 03BRL-CAD:starseeker * 61444 brlcad/branches/openscenegraph/src/libdm/osg-test.cpp: Recreating wireframes as regions isn't working, not sure what's wrong yet... |
| 00:46.19 | Notify | 03BRL-CAD:starseeker * 61445 brlcad/branches/openscenegraph/src/libdm/osg-test.cpp: Need to be aware that the vertArray might already have elements in it. Gets us closer, but missing the stipple for subtracted elements. |
| 00:52.21 | *** join/#brlcad Zhao_Anqing (clouddrift@222.205.5.187) | |
| 01:09.27 | Notify | 03BRL-CAD:starseeker * 61446 brlcad/branches/openscenegraph/src/libdm/osg-test.cpp: Get drawing working with the region optimization enabled. Need to look into creating just combs above regions to save memory, and lazily create lower level structure as needed, but shaping up. |
| 01:47.41 | *** join/#brlcad clock (~clock@77-58-143-135.dclient.hispeed.ch) | |
| 01:58.36 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) | |
| 02:22.55 | Notify | 03BRL-CAD Wiki:Hcurtis0010 * 7425 /wiki/Google_Summer_of_Code/2014: |
| 02:24.58 | Notify | 03BRL-CAD Wiki:Hcurtis0010 * 7426 /wiki/User:Hcurtis0010/GSoC2014/proposal: Replaced content with "TBD" |
| 02:58.11 | *** join/#brlcad hcurtis (b82d1b9f@gateway/web/freenode/ip.184.45.27.159) | |
| 03:01.13 | starseeker | urk. bundling freetype may be problematic: http://www.freetype.org/license.html |
| 03:16.58 | *** join/#brlcad clock (~clock@77-58-143-135.dclient.hispeed.ch) | |
| 03:25.48 | starseeker | great https://lists.gnu.org/archive/html/freetype/2013-06/msg00013.html |
| 03:26.40 | starseeker | wonders if we need to be LGPLv2.1 + excemption for freetype... |
| 03:27.25 | starseeker | that really sucks... I don't know of any viable freetype replacement |
| 03:29.25 | starseeker | unless we revive t1lib... |
| 03:34.19 | *** join/#brlcad teepee (~teepee@gateway/tor-sasl/teepee) | |
| 03:45.02 | Notify | 03BRL-CAD Wiki:Inderpreet * 7427 /wiki/User:Inderpreet/GSoC14/logs: /* Week 6 */ |
| 04:51.47 | *** join/#brlcad piyushparkash (~piyushpar@117.205.66.59) | |
| 04:51.51 | *** join/#brlcad ishwerdas (~ishwerdas@117.199.104.113) | |
| 05:29.02 | mihaineacsu | brlcad: as I might not be able to reach you during the weekend, after making the small mod on gqa to accept urls, what do you suggest I should take on next? |
| 05:36.50 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) | |
| 06:15.08 | *** join/#brlcad Zhao_Anqing (~clouddrif@183.157.160.10) | |
| 06:41.45 | *** join/#brlcad hoiji (671b082a@gateway/web/cgi-irc/kiwiirc.com/ip.103.27.8.42) | |
| 07:23.43 | *** join/#brlcad d_rossberg (~rossberg@66.118.151.70) | |
| 08:52.43 | *** join/#brlcad andrei_ (~IceChat77@188.26.183.174) | |
| 09:08.27 | *** join/#brlcad teepee- (bc5c2133@gateway/web/freenode/ip.188.92.33.51) | |
| 09:14.37 | *** join/#brlcad Zhao_Anqing (~clouddrif@183.157.160.17) | |
| 09:42.14 | *** join/#brlcad Zhao_Anqing (~clouddrif@183.157.160.27) | |
| 09:43.16 | *** join/#brlcad piyushparkash (~piyushpar@117.205.66.59) | |
| 10:06.28 | *** join/#brlcad Zhao_Anqing (~clouddrif@183.157.160.19) | |
| 10:14.19 | *** join/#brlcad teepee- (bc5c2133@gateway/web/freenode/ip.188.92.33.51) | |
| 10:41.57 | Notify | 03BRL-CAD:d_rossberg * 61447 brlcad/trunk/src/conv/fast4-g.c: what was that? looks like a 10 years old typing error |
| 10:45.24 | *** join/#brlcad ishwerdas (~ishwerdas@117.199.104.113) | |
| 10:58.20 | Notify | 03BRL-CAD:d_rossberg * 61448 (rt^3/trunk/src/coreInterface/CMakeLists.txt rt^3/trunk/src/coreInterface/ConstDatabase.cpp rt^3/trunk/src/coreInterface/Database.cpp): applied "Sphere primitive implementation" from Andrei Popescu (http://sourceforge.net/p/brlcad/patches/279) with minor modifications |
| 10:58.27 | *** join/#brlcad caen23 (~caen23@92.83.166.162) | |
| 11:27.59 | *** join/#brlcad ishwerdas (~ishwerdas@117.199.99.240) | |
| 11:29.42 | n_reed | brlcad: hah, r61447, comma operator |
| 11:34.40 | starseeker | makes a note to look into https://github.com/nothings/stb/blob/master/stb_truetype.h |
| 11:51.52 | ``Erik | heh, zero point zero, zero then zero, whatever O.o I'm guessing it was well cloaked "0,0" before indent touched it |
| 12:09.27 | *** join/#brlcad teepee- (bc5c2133@gateway/web/freenode/ip.188.92.33.51) | |
| 12:10.41 | *** join/#brlcad Zhao_Anqing (~clouddrif@183.157.160.25) | |
| 12:18.32 | *** join/#brlcad teepee (~teepee@gateway/tor-sasl/teepee) | |
| 12:45.52 | *** join/#brlcad piyushparkash (~piyushpar@117.205.66.59) | |
| 13:06.02 | Notify | 03BRL-CAD:d_rossberg * 61449 brlcad/trunk/misc/win32-msvc/Dll/CMakeLists.txt: added the Sphere interface here too |
| 13:08.34 | Notify | 03BRL-CAD:d_rossberg * 61450 rt^3/trunk/src/coreInterface/Database.cpp: don't remove implicit attributes |
| 13:19.26 | Notify | 03BRL-CAD:ejno * 61451 brlcad/trunk/src/conv/3dm/3dm-g.cpp: correct code indentation |
| 15:05.06 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) | |
| 15:11.37 | *** join/#brlcad clock (~clock@77-58-143-135.dclient.hispeed.ch) | |
| 15:34.24 | *** join/#brlcad lans (c4cef7b8@gateway/web/cgi-irc/kiwiirc.com/ip.196.206.247.184) | |
| 15:37.39 | kanzure | any ideas why the extern 'c' methods aren't wrapped in python-brlcad? https://github.com/kanzure/brlcad/blob/master/src/librt/primitives/brep/brep.cpp |
| 15:38.06 | kanzure | maybe ctypesgen skips *.cpp files? |
| 15:38.15 | *** join/#brlcad hcurtis (b82d1b9f@gateway/web/freenode/ip.184.45.27.159) | |
| 15:38.23 | kanzure | rt_brep_plot does not appear in brlcad._bindins.librt |
| 15:43.14 | Notify | 03BRL-CAD:d_rossberg * 61452 brlcad/trunk/include/pstdint.h: apparently at least Visual Studio 2010 in necessary to get uintptr macros from the C library |
| 15:56.20 | kanzure | nevermind, it looks like some of them are mangled while others aren't |
| 15:56.25 | *** join/#brlcad clock (~clock@77-58-143-135.dclient.hispeed.ch) | |
| 16:13.32 | *** join/#brlcad DrNoboto (~eric@74.94.121.230) | |
| 16:14.15 | DrNoboto | oh hey, it's archivist |
| 16:17.23 | *** join/#brlcad hcurtis (b82d1b9f@gateway/web/freenode/ip.184.45.27.159) | |
| 16:18.39 | hcurtis | Hi, everybody. Here's a good article about what's been going on lately with Linus Torvalds: http://www.infoworld.com/t/linux/linus-torvalds-developers-succeed-make-it-personal-245055?source=IFWNLE_nlt_stradev_2014-06-26 |
| 16:25.02 | Notify | 03BRL-CAD:starseeker * 61453 brlcad/branches/openscenegraph/src/libdm/osg-test.cpp: Attempt to generalize the drawing logic - managed to slow down the rendering in the process, needs more investigation. |
| 16:36.42 | Notify | 03BRL-CAD Wiki:Sean * 0 /wiki/User:Hcurtis0010/GSoC2014/proposal: content was: "TBD" (and the only contributor was "[[Special:Contributions/Hcurtis0010|Hcurtis0010]]") |
| 16:38.39 | Notify | 03BRL-CAD:starseeker * 61454 brlcad/branches/openscenegraph/src/libdm/osg-test.cpp: Return code of search apparently wasn't returning the count - need to check why, we don't need the results table here. |
| 16:40.26 | kanzure | what's the point of _on_brep_placeholder? |
| 16:48.27 | Notify | 03BRL-CAD:starseeker * 61455 brlcad/branches/openscenegraph/src/libdm/osg-test.cpp: Don't need to actually identify the assemblies, just see whether we have any - faster search. |
| 16:53.18 | *** join/#brlcad cwstirk (~charlie@c-24-9-78-79.hsd1.co.comcast.net) | |
| 16:58.43 | Notify | 03BRL-CAD:starseeker * 61456 brlcad/branches/openscenegraph/src/libdm/osg-test.cpp: Use a (much) faster search for assemblies. |
| 17:08.43 | Notify | 03BRL-CAD:starseeker * 61457 brlcad/trunk/doc/docbook/system/mann/en/search.xml: Improve a couple of the search examples |
| 17:09.39 | Notify | 03BRL-CAD:starseeker * 61458 brlcad/trunk/src/conv/step/g-ap214/Add_Tree.cpp: Previous method of assembly search was slow - probably need to rework the others too. |
| 17:20.28 | *** join/#brlcad vladbogo (~vlad@195.216.218.10) | |
| 17:21.57 | *** join/#brlcad alisha (~alisha@101.57.209.100) | |
| 17:25.21 | starseeker | makes a note of http://clb.demon.fi/files/RectangleBinPack/ as well to see if it makes sense to use with stb_truetype.h... |
| 17:33.39 | starseeker | let's toss http://code.google.com/p/freetype-gl/ on that list while we're at it... |
| 17:44.16 | starseeker | http://hamelot.co.uk/visualization/opengl-text-without-any-external-libraries/ |
| 18:01.05 | *** join/#brlcad clock (~clock@77-58-143-135.dclient.hispeed.ch) | |
| 18:06.23 | *** join/#brlcad alisha (~alisha@101.58.199.75) | |
| 18:14.35 | *** join/#brlcad piyushparkash (~piyushpar@117.205.64.18) | |
| 18:18.03 | *** join/#brlcad andrei__ (~IceChat77@86.127.147.243) | |
| 18:39.28 | Notify | 03BRL-CAD:n_reed * 61459 brlcad/branches/brep-debug/src/libged/brep.c: enable plotting isocurve-surface events |
| 18:55.16 | Notify | 03BRL-CAD:n_reed * 61460 brlcad/branches/brep-debug/src/libbrep/debug_plot.cpp: event curve is already 3d |
| 19:05.50 | *** join/#brlcad javampire (~ncsaba@p4FF71D8D.dip0.t-ipconnect.de) | |
| 19:06.25 | Notify | 03BRL-CAD:ejno * 61461 (brlcad/trunk/src/conv/3dm/3dm-g.cpp brlcad/trunk/src/conv/CMakeLists.txt): refactor; move into a class so we don't have to pass many arguments around; improve layer hierarchy generation; don't add objects to a layer if they are used in an idef; move command-line part into a separate file (for libgcv) |
| 19:24.47 | Notify | 03BRL-CAD:starseeker * 61462 brlcad/trunk/src/conv/3dm/3dm-g.cpp: include stdio.h for sscanf |
| 19:28.59 | Notify | 03BRL-CAD:ejno * 61463 brlcad/trunk/src/conv/3dm/conv3dm-g.cpp: fix typo |
| 19:42.51 | *** join/#brlcad ankesh11_ (uid8015@gateway/web/irccloud.com/session) | |
| 19:53.37 | Notify | 03BRL-CAD:n_reed * 61464 brlcad/trunk/src/libbrep/intersect.cpp: rename more vars for readability |
| 20:07.02 | Notify | 03BRL-CAD:ejno * 61465 (brlcad/trunk/src/conv/3dm/3dm-g.cpp brlcad/trunk/src/conv/3dm/conv3dm-g.cpp brlcad/trunk/src/conv/3dm/conv3dm-g.h): add indentation lines to end of files; simplify idef creation function |
| 20:21.17 | *** join/#brlcad ankesh11 (uid8015@gateway/web/irccloud.com/x-kfnoofstjejhkhst) | |
| 20:30.50 | Notify | 03BRL-CAD Wiki:Popescu.andrei1991 * 7428 /wiki/User:Popescu.andrei1991/devlogs2014: /* Week 6 */ |
| 20:39.47 | *** join/#brlcad DarkCalf (~DarkCalf@173.231.40.98) | |
| 20:43.33 | Notify | 03BRL-CAD Wiki:Ankeshanand * 7429 /wiki/User:Ankeshanand/GSoC14/logs: /* Week 6 */ |
| 20:57.35 | *** join/#brlcad piyushparkash (~piyushpar@117.205.64.18) | |
| 20:59.46 | Notify | 03BRL-CAD:ejno * 61466 (brlcad/trunk/src/conv/3dm/conv3dm-g.cpp brlcad/trunk/src/conv/3dm/conv3dm-g.h): store database names in one location |
| 21:06.49 | Notify | 03BRL-CAD:n_reed * 61467 brlcad/branches/brep-debug/src/libbrep/intersect.cpp: flip my bool to fix isocurve-surface association in plots |
| 21:12.21 | Notify | 03BRL-CAD:n_reed * 61468 (brlcad/branches/brep-debug/src/libbrep/debug_plot.cpp brlcad/branches/brep-debug/src/libged/brep.c): color brep1 and brep2 plots differently for clarity |
| 21:15.14 | Notify | 03BRL-CAD:n_reed * 61469 (brlcad/branches/brep-debug/src/libbrep/debug_plot.cpp brlcad/branches/brep-debug/src/libbrep/debug_plot.h brlcad/branches/brep-debug/src/libbrep/intersect.cpp): remove unused parameter |
| 21:24.00 | *** join/#brlcad caen23_ (~caen23@92.83.166.162) | |
| 21:28.28 | Notify | 03BRL-CAD:n_reed * 61470 (brlcad/branches/brep-debug/doc/docbook/system/mann/en/search.xml brlcad/branches/brep-debug/include/pstdint.h and 13 others): sync from trunk through r61469 |
| 21:30.59 | *** join/#brlcad KimK (~Kim__@ip68-102-30-143.ks.ok.cox.net) | |
| 21:43.38 | Notify | 03BRL-CAD Wiki:Albertcoder * 7430 /wiki/User:Albertcoder/GSoC2014/logs: /* Week 6 */ |
| 22:05.38 | *** join/#brlcad mihaineacsu (~mihaineac@92.85.193.175) | |
| 22:17.52 | *** join/#brlcad FreezingCold (~FreezingC@135.0.41.14) | |
| 22:47.37 | *** join/#brlcad FreezingCold (~FreezingC@135.0.41.14) | |
| 23:19.55 | Notify | 03BRL-CAD:starseeker * 61471 (brlcad/branches/openscenegraph/include/dm.h brlcad/branches/openscenegraph/include/ged.h and 103 others): Not quite there yet, but this is the first stage of extracting view management from libged and moving it into libdm. |
| 23:32.17 | *** join/#brlcad FreezingCold (~FreezingC@135.0.41.14) | |