| 00:05.09 | starseeker | andromeda-galaxy: yep, that's it |
| 00:19.09 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) | |
| 00:40.58 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) | |
| 01:00.05 | *** join/#brlcad ofnlut_ (~ofnlut_@c-68-48-58-20.hsd1.dc.comcast.net) | |
| 01:12.48 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) | |
| 01:33.07 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) | |
| 01:58.04 | Notify | 02GCI:o7p9bxbnyj * 5786731743805440 : Task Claimed - I would like to work on this task. |
| 01:58.09 | Notify | 02GCI:gjeet * 5907948270256128 : Deadline extended - The deadline of the task has been extended with 1 days and 22 hours. |
| 01:58.24 | Notify | 02GCI:deepakkumarsharma * 5786731743805440 : Task Assigned - This task has been assigned to Andromeda Galaxy. You have 100 hours to complete this task, good luck! |
| 01:58.34 | Notify | 02GCI:ch3ck * 5907948270256128 : Deadline extended - The deadline of the task has been extended with 1 days and 0 hours. |
| 01:59.04 | Notify | 02GCI:brlcad * 6366572662751232 : Task Closed - Congratulations, this task has been completed successfully. |
| 01:59.14 | Notify | 02GCI:brlcad * 5806249618702336 : Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to... |
| 01:59.16 | Notify | 02GCI:brlcad * 5806249618702336 : How many regions? - Aditya, how many regions did you end up creating? There should be a single region object for every distinct piece of geometry (each "part"). If... |
| 01:59.16 | Notify | 02GCI:tannousmarc * 5893656028381184 : What I did - First, I tried using simian on my VM, and after 2 hours of letting it work I realized that there is no point in doing that and finally got... |
| 01:59.26 | Notify | 02GCI:tannousmarc * 5893656028381184 : Ready for review - The work on this task is ready to be reviewed. |
| 01:59.39 | Notify | 02GCI:tannousmarc * 5893656028381184 Identify and eliminate dead code (100+ lines) https://www.google-melange.com/gci/task/view/google/gci2014/5893656028381184: Also, something to help out others ... |
| 02:01.06 | Notify | 03BRL-CAD:brlcad * 63745 brlcad/trunk/CHANGES: peter replaced the db5_enc_len global array with a macro in r63739 per gci task http://www.google-melange.com/gci/task/view/google/gci2014/5814267383119872 |
| 02:01.07 | gcibot | Eliminate any library global variable #3 |
| 02:01.07 | gcibot | Status: Closed |
| 02:01.07 | gcibot | Mentor(s): Mandeep Kaur, Jacob B |
| 02:01.14 | Notify | 03BRL-CAD:brlcad * 63747 brlcad/trunk/include/db5.h: remove the db5_enc_len[] global array now that it's been replaced with DB5_ENC_LEN(). |
| 02:01.28 | Notify | 03BRL-CAD:brlcad * 63746 brlcad/trunk/src/libbu/y2038/time64.c: it's not handy when it causes strictness compilation failures. remove unused var. |
| 02:02.30 | Notify | 02GCI:brlcad * 6366572662751232 : well played - haha, I guess this task was not specific enough. The intent was to model a manual hand drill (the kind that you turn manually with your hands), not... |
| 02:06.56 | Notify | 02GCI:o7p9bxbnyj * 5786731743805440 : Ready for review - The work on this task is ready to be reviewed. |
| 02:56.34 | *** join/#brlcad alisha (~alisha@115.185.171.113) | |
| 03:38.16 | *** join/#brlcad deepak_ (~chatzilla@202.164.53.117) | |
| 03:40.19 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) | |
| 04:39.08 | andromeda-galaxy | anyone know where I can find some fairly complex NURBS geometry? |
| 04:50.04 | *** join/#brlcad Marctannous (5679c4d5@gateway/web/freenode/ip.86.121.196.213) | |
| 04:50.11 | Marctannous | good morning everyone |
| 04:50.19 | Marctannous | did anyone have any chance of looking over my task? |
| 04:54.22 | Notify | 03BRL-CAD:brlcad * 63748 brlcad/trunk/NEWS: cliff added a bot chull subcommand to create convex hulls around geometry (todo: reconcile against how the CLI would get extended if we did concave hulls too .. still chull? just hull? envelope?). |
| 04:56.01 | Notify | 03BRL-CAD:brlcad * 63749 brlcad/trunk/NEWS: worth calling out the robustness and performance improvements to NURBS Booleans by nick in addition to the existing new feature item. |
| 04:57.54 | Notify | 03BRL-CAD:brlcad * 63750 brlcad/trunk/NEWS: nick exposed the evaluated shaded mode drawing in archer via a preferences dialog as well as adding it to the context menu. |
| 05:02.43 | Notify | 03BRL-CAD:brlcad * 63751 brlcad/trunk/src/conv/step/g-step/Assembly_Product.cpp: removed unused vars |
| 05:05.36 | Notify | 02GCI:shetaksroc * 6662339411574784 : Task Claimed - I would like to work on this task. |
| 05:36.45 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) | |
| 05:55.23 | *** join/#brlcad FreezingCold (~FreezingC@135.0.41.14) | |
| 05:59.23 | Notify | 03BRL-CAD:brlcad * 63752 (brlcad/trunk/src/conv/step/step-g/MeasureValue.cpp brlcad/trunk/src/conv/step/step-g/MeasureValue.h): match the STEPEntity::Load() signature to avoid type mismatch warnings. looks like MeasureWithValue already unpacks the measure value, so here can just mimic that bit of logic. |
| 06:02.37 | Notify | 02GCI:brlcad * 6662339411574784 : Task Assigned - This task has been assigned to Archana. You have 100 hours to complete this task, good luck! |
| 06:02.57 | Notify | 02GCI:zehata * 6187982620983296 : Task Claimed - I would like to work on this task. |
| 06:07.43 | Notify | 02GCI:brlcad * 5893656028381184 : Task Closed - Congratulations, this task has been completed successfully. |
| 06:12.18 | Notify | 02GCI:brlcad * 6187982620983296 : Task Assigned - This task has been assigned to Zenon. You have 100 hours to complete this task, good luck! |
| 06:13.08 | Notify | 02GCI:brlcad * 5786731743805440 : Task Closed - Congratulations, this task has been completed successfully. |
| 06:34.11 | Notify | 02GCI:o7p9bxbnyj * 6347760236232704 : Task Claimed - I would like to work on this task. |
| 06:34.52 | Notify | 02GCI:popescuandrei * 6347760236232704 : Task Assigned - This task has been assigned to Andromeda Galaxy. You have 100 hours to complete this task, good luck! |
| 06:35.15 | *** join/#brlcad andrei_ (c35a6e7d@gateway/web/freenode/ip.195.90.110.125) | |
| 06:35.41 | andrei_ | hello |
| 06:35.46 | andrei_ | ooh, no tasks to review :O |
| 06:39.50 | andrei_ | takes the time to work on some new tasks |
| 06:55.04 | *** join/#brlcad kesha_ (~kesha@106.51.132.236) | |
| 06:58.34 | *** join/#brlcad kesha_ (~kesha@106.51.132.236) | |
| 07:11.53 | *** join/#brlcad kesha_ (~kesha@106.51.132.236) | |
| 07:16.51 | andrei_ | brlcad: you here? |
| 07:17.11 | andrei_ | ~seen brlcad |
| 07:17.13 | infobot | brlcad is currently on #bzflag #stepcode #gsoc #brlcad, last said: 'you have to make this future-proof to someone that is going to glance at this file X years from now long after everyone has forgotten that the limit values were never hooked up'. |
| 07:37.59 | Notify | 02GCI:o7p9bxbnyj * 6347760236232704 : Ready for review - The work on this task is ready to be reviewed. |
| 07:38.54 | Notify | 02GCI:o7p9bxbnyj * 6347760236232704 : Output command - The output png file was the result of converting the brlcad-modeled-output.pix generated by the following rt command to png with pix-png; the... |
| 07:41.15 | Notify | 02GCI:popescuandrei * 6347760236232704 : None - Hello, Andromeda! Perhaps it's just my impression but the L looks 2D compared to the other letters that look 3D. It makes it a bit confusing. Also,... |
| 07:41.16 | Notify | 02GCI:popescuandrei * 6347760236232704 : Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements... |
| 07:45.36 | Notify | 02GCI:o7p9bxbnyj * 6347760236232704 : B semicircles - I actually put the B semicircles overlapping slightly like that on purpose, as I thought it added a little bit more distinctiveness than is... |
| 07:47.41 | Notify | 02GCI:popescuandrei * 6347760236232704 : None - If you put the B semicircles on purpose, leave them like that :). Also, if you can quickly fix the L, the task is done, from my point of view. |
| 07:48.31 | Notify | 02GCI:o7p9bxbnyj * 6347760236232704 : Ready for review - The work on this task is ready to be reviewed. |
| 07:48.56 | *** join/#brlcad merzo (~merzo@15-122-133-95.pool.ukrtel.net) | |
| 07:49.06 | Notify | 02GCI:o7p9bxbnyj * 6347760236232704 : New render - The nenw render was made with -e60 to rt, it makes thn depth on the 'l' a little bit clearer... |
| 07:50.42 | Notify | 02GCI:popescuandrei * 6347760236232704 : Perfect! - That's exactly what I meant! Awesome, Andromeda! You have fixed it in such a short time, congratulations! |
| 07:50.47 | Notify | 02GCI:popescuandrei * 6347760236232704 : Task Closed - Congratulations, this task has been completed successfully. |
| 07:56.11 | *** join/#brlcad MarcTannousSchoo (59eef606@gateway/web/cgi-irc/kiwiirc.com/ip.89.238.246.6) | |
| 07:56.25 | MarcTannousSchoo | brlcad, was my task okay? you closed it without nay additional comments |
| 07:57.05 | MarcTannousSchoo | ch3ck,starseeker,stragus thanks for the help last night with Linux, needed it. |
| 08:00.51 | Stragus | Cool, you got it all figured out now? :) |
| 08:01.40 | MarcTannousSchoo | Stragus, still have some problems installing the build, but can work on the source code for now, can't compile to see if it works yet |
| 08:01.47 | MarcTannousSchoo | will re-install brl-cad altogether when I get home |
| 08:01.48 | andrei_ | why? |
| 08:01.50 | andrei_ | I ll help you |
| 08:01.53 | andrei_ | if I m still around |
| 08:01.59 | MarcTannousSchoo | Had some weird issues when compiling |
| 08:02.04 | andrei_ | you probably miss some dependencies |
| 08:02.09 | Stragus | Probably, yes |
| 08:02.16 | MarcTannousSchoo | something along the lines error: you need a strstream/sstream compiler |
| 08:02.18 | andrei_ | there was someone who made packages of brlcad |
| 08:02.21 | andrei_ | Jordi, I believe |
| 08:02.29 | MarcTannousSchoo | googled around a lot and nobody had the same issue |
| 08:02.33 | andrei_ | that's probably g++ |
| 08:02.37 | MarcTannousSchoo | I thought so too |
| 08:02.42 | MarcTannousSchoo | so I updated my gcc and g++ |
| 08:02.45 | MarcTannousSchoo | still had the issue |
| 08:02.54 | Stragus | That sounds weird |
| 08:02.56 | MarcTannousSchoo | I'll just see if reinstalling solves the issue |
| 08:03.13 | Stragus | Give us the exact error message when you can |
| 08:03.14 | andrei_ | it sounds more like something caused by code |
| 08:03.17 | MarcTannousSchoo | Might have just been something obvious I was missing, it was around 23:30 when this happened |
| 08:03.39 | andrei_ | during uni, 23.30 was when I started working on stuff :)) |
| 08:03.49 | *** join/#brlcad ries (~ries@D979C47E.cm-3-2d.dynamic.ziggo.nl) | |
| 08:03.51 | MarcTannousSchoo | just a second stragus, I can give you the error right now |
| 08:03.55 | MarcTannousSchoo | I see we have logs |
| 08:04.12 | andrei_ | for some reason, few do |
| 08:04.26 | Stragus | tends to also start working around that time, working remotely will do that |
| 08:04.28 | MarcTannousSchoo | #error "Need a stringstream (sstream or strstream) to compile!" |
| 08:04.45 | MarcTannousSchoo | at around 57% of the "make install" process |
| 08:04.53 | MarcTannousSchoo | googled it a lot, nobody had the same issue |
| 08:05.05 | MarcTannousSchoo | not sure if the problem was on my side or with brlcad's src |
| 08:05.06 | Stragus | It's a custom #error in the source code |
| 08:05.19 | Stragus | Typically: #if badstuff #error ARGHH!! #endf |
| 08:05.21 | MarcTannousSchoo | yeah, it needed sstream.h or strstream.h |
| 08:05.24 | MarcTannousSchoo | I grepd it |
| 08:05.32 | MarcTannousSchoo | no idea how to manually add these |
| 08:06.17 | andrei_ | you should check out the svn again |
| 08:06.28 | andrei_ | if you get the same error, we ll look into i |
| 08:06.29 | andrei_ | t |
| 08:06.30 | MarcTannousSchoo | the code was along hte lines of |
| 08:06.34 | MarcTannousSchoo | along the lines of * |
| 08:06.57 | MarcTannousSchoo | ifndef strstream.h ifndef sstream.h error |
| 08:07.34 | Stragus | sstream.h is a standard C++ header |
| 08:07.41 | Stragus | Darn, Debian is messed up |
| 08:07.44 | MarcTannousSchoo | +1 |
| 08:07.51 | Stragus | You are probably missing some GCC related package somewhere |
| 08:07.58 | MarcTannousSchoo | how should I install it? |
| 08:08.08 | MarcTannousSchoo | one of you recommended I apt-get install build-essentials |
| 08:08.18 | MarcTannousSchoo | I sudo apt-get installd it and I still had the error |
| 08:08.36 | andrei_ | Marc, don t worry, we ll fix it :) |
| 08:08.48 | andrei_ | The bad thing with Linux is sometimes it needs a lot of fiddling |
| 08:08.55 | andrei_ | the good part is you can always do it yourself |
| 08:08.56 | andrei_ | :) |
| 08:08.58 | MarcTannousSchoo | IIRC packages I installed were Cmake, Simian, Svn, gcc, g++ |
| 08:09.13 | MarcTannousSchoo | also build-essentials |
| 08:09.55 | andrei_ | there are things than can break |
| 08:10.05 | andrei_ | i.e you need g++_x64 |
| 08:10.07 | andrei_ | instead of g++ |
| 08:10.08 | andrei_ | stuff like that |
| 08:10.09 | MarcTannousSchoo | oh |
| 08:10.10 | andrei_ | don t worry |
| 08:10.16 | Stragus | I'm sure Debian must have packaged the C++ headers into a different package |
| 08:10.21 | Stragus | Debian will do that, just to annoy people |
| 08:10.27 | andrei_ | hahah |
| 08:10.35 | MarcTannousSchoo | Why did I install Debian |
| 08:10.39 | MarcTannousSchoo | :( |
| 08:10.41 | andrei_ | it's good you did :) |
| 08:10.50 | MarcTannousSchoo | People of the internet told me Debian > Ubuntu |
| 08:10.53 | andrei_ | it's a more popular, easier distribution tree |
| 08:10.59 | MarcTannousSchoo | EASIER |
| 08:11.05 | Stragus | You'll probably need some kind of package named libstdc++6-4.2-dev or some other crap |
| 08:11.06 | MarcTannousSchoo | oh god |
| 08:11.13 | andrei_ | ^ |
| 08:11.16 | andrei_ | yeah, what Stragus said |
| 08:11.25 | andrei_ | I used archlinux for quite a while |
| 08:11.31 | Stragus | Neither Debian nor Ubuntu are good for programmers |
| 08:11.36 | Stragus | For normal users, perhaps |
| 08:11.41 | MarcTannousSchoo | I'm happy Sean closed my task first-try, I must be improving or he might have made a mistake |
| 08:11.41 | andrei_ | until I got tired of it needing to update every time I needed whatever |
| 08:12.01 | MarcTannousSchoo | Not sure if removing 500-600 lines of code was too much |
| 08:12.07 | andrei_ | Marc, come on |
| 08:12.10 | MarcTannousSchoo | I should've been smart and divided it into two tasks xD |
| 08:12.14 | andrei_ | focus on what's ahead |
| 08:12.18 | andrei_ | not on what's behind :) |
| 08:12.21 | MarcTannousSchoo | not sure what's ahaead |
| 08:12.27 | andrei_ | well, figure it out :) |
| 08:12.29 | andrei_ | claim a task |
| 08:12.31 | andrei_ | work some more |
| 08:12.33 | andrei_ | be more awesome |
| 08:12.35 | andrei_ | :) |
| 08:12.35 | MarcTannousSchoo | if the new task batch does not come out until I get home |
| 08:12.43 | MarcTannousSchoo | I'll get a new code duplication task I guess |
| 08:12.47 | andrei_ | I ve done a count |
| 08:12.54 | andrei_ | I m not sure when they'll be delivered |
| 08:12.58 | MarcTannousSchoo | There was a lot of duplication in Tcl files |
| 08:13.02 | andrei_ | but there are about 80+ new tasks |
| 08:13.05 | *** join/#brlcad YashM (~YashM@117.198.13.245) | |
| 08:13.09 | MarcTannousSchoo | But I had no idea about Tcl |
| 08:13.17 | MarcTannousSchoo | so I chose the C files |
| 08:13.30 | MarcTannousSchoo | oh, I should actually post a link here on IRC |
| 08:13.32 | MarcTannousSchoo | just a sec |
| 08:13.41 | andrei_ | Stragus: you have a point, I don t like ubuntu since it became bloated with stuff I never use |
| 08:13.43 | *** join/#brlcad d_rossberg (~rossberg@66-118-151-70.static.sagonet.net) | |
| 08:13.57 | andrei_ | like AudioDJ |
| 08:14.00 | MarcTannousSchoo | http://pastebin.com/z5TRvLqe , for anyone that does not want to run simian on their VM as it takes literally ages |
| 08:14.18 | MarcTannousSchoo | that's all the code duplication in brlcad's src |
| 08:14.56 | MarcTannousSchoo | except for the ones in Factory.c, I fixed those |
| 08:14.58 | Stragus | andrei_, I'm very fond of Gentoo |
| 08:15.09 | andrei_ | really? |
| 08:15.29 | andrei_ | isn't compiling everything yourself a setback? |
| 08:15.34 | Stragus | It's great for programmers. Everything compiles to install |
| 08:16.01 | Stragus | No, it's amazing! You can build a whole system without any forced binary dependency on PulseAudio or any other garbage distributions try to force on you |
| 08:16.19 | MarcTannousSchoo | I guess I'll just get used to Linux on a "user-friendly" OS like Debian and in a few months/years get into the hardcore stuff like Gentoo :D |
| 08:16.36 | andrei_ | you don t need to get "hardcore" stuff unless you really use it |
| 08:16.52 | andrei_ | I used archlinux as it saved about 1h of battery on my laptop |
| 08:17.05 | andrei_ | (it s minimal, starts at about 300mb ) |
| 08:17.49 | Stragus | Right. With Gentoo or ArchLinux, you have freedom to build your system as you want it |
| 08:17.51 | *** join/#brlcad merzo (~merzo@15-122-133-95.pool.ukrtel.net) | |
| 08:18.10 | andrei_ | the problem with ArchLinux is pacman(it's version of apt-get) |
| 08:18.23 | andrei_ | it gets broken from time to time, and it s messy to fix |
| 08:18.37 | andrei_ | but yeah, building a system with exactly what you want/need is awesome |
| 08:18.46 | andrei_ | It costs you a day, then save you plenty others |
| 08:18.52 | MarcTannousSchoo | one thing I liked about linux was the downloading and apt-get directly into the terminal |
| 08:18.53 | Stragus | Compiling from scratch allows that, you choose your dependencies and options |
| 08:19.00 | MarcTannousSchoo | that's about the only thing that I liked xD |
| 08:19.05 | andrei_ | haha |
| 08:19.32 | Stragus | Give it time... :) I'm so used to having 8 desktops and switching instantly between them, Windows feels so awkward |
| 08:19.48 | MarcTannousSchoo | Stragus, you can do that on Windows too |
| 08:19.55 | MarcTannousSchoo | Dual monitor configuration allows for stuff like that |
| 08:19.55 | Stragus | uses a minimalistic window manager, I want absolutely instanteous response |
| 08:20.10 | MarcTannousSchoo | Also Debian does not recognize my second monitor for some reason |
| 08:20.14 | andrei_ | Stragus: why not 4 gpu's then? :)) |
| 08:20.22 | MarcTannousSchoo | :)) |
| 08:20.26 | Stragus | Nah. Switching instantly between desktops on the same monitor is faster than moving your eyes to a different monitor |
| 08:20.28 | MarcTannousSchoo | maybe he's on a laptop |
| 08:20.46 | Stragus | And I'm serious about this. Having all your desktops on the same monitor is better |
| 08:20.53 | MarcTannousSchoo | Stragus: you'll get used to it, and won't consider it a different monitor but an extension |
| 08:20.59 | Stragus | I have tried it |
| 08:21.19 | andrei_ | I usually get tangled in terminals |
| 08:21.20 | Stragus | It takes longer to rotate the head and focus the eyes than to switch desktop |
| 08:21.32 | andrei_ | got about 16 right now |
| 08:21.35 | andrei_ | with various stuff |
| 08:21.46 | MarcTannousSchoo | Also, is there any way I can cascade windows in debian? |
| 08:21.54 | Stragus | Sure, I must have about 16 too on all the desktops |
| 08:21.57 | MarcTannousSchoo | so if I have 4 terminals open they show up in my taskbar as just one? |
| 08:22.05 | andrei_ | uhm ... |
| 08:22.24 | MarcTannousSchoo | I'm used to that and having to navigate through all of them seems awkward ( long time windows user problems ) |
| 08:22.24 | Stragus | That depends on your window manager. I wouldn't want that though |
| 08:23.05 | *** join/#brlcad YashM_ (~YashM@117.215.32.244) | |
| 08:23.33 | Stragus | Ideally, you want an environment where you can navigate between your windows/terminals/programs without ever touching the mouse and with your eyes closed |
| 08:23.41 | andrei_ | :)) |
| 08:23.44 | andrei_ | that's a bit hardcore |
| 08:23.45 | Stragus | If you have that, you'll be efficient |
| 08:23.49 | andrei_ | for a highschool student |
| 08:23.54 | Stragus | Oh... right |
| 08:24.01 | MarcTannousSchoo | :)))\ |
| 08:24.03 | andrei_ | but I get your point |
| 08:24.08 | andrei_ | it's the same with Vim |
| 08:24.15 | MarcTannousSchoo | is there a command for switching between desktops? |
| 08:24.17 | andrei_ | some people are blazingly fast with Vim |
| 08:24.18 | MarcTannousSchoo | keyboard command I mean |
| 08:24.23 | andrei_ | Ctrl + arrow |
| 08:24.23 | MarcTannousSchoo | or can i map my keyboard under Linux? |
| 08:24.25 | andrei_ | afaik |
| 08:24.26 | Stragus | That depends on the window manager |
| 08:24.38 | Stragus | Ctrl+Alt+1, Ctrl+Alt+2, etc. is rather standard |
| 08:24.42 | mihaineacsu_away | if you're on osx, you could switch to iterm2 and split the window horizontaly/vertically for multiple sessions |
| 08:24.43 | MarcTannousSchoo | not sure what a window manager is but I have a Gnome desktop if that's what you mean |
| 08:25.01 | mihaineacsu_away | if not you can go for tmux or something simillar |
| 08:25.21 | MarcTannousSchoo | mihaineacsu, do you have the adobe suite on OSX? |
| 08:25.27 | mihaineacsu_away | yes, you do |
| 08:25.32 | MarcTannousSchoo | I wanted to know if it's any better than the windows version |
| 08:25.48 | MarcTannousSchoo | a lot of designers say it feels smoother |
| 08:25.51 | mihaineacsu | a while designers |
| 08:25.57 | mihaineacsu | used to switch because of that |
| 08:25.59 | MarcTannousSchoo | Photoshop/Illustrator/etc. |
| 08:26.02 | mihaineacsu | a while ago* |
| 08:26.18 | MarcTannousSchoo | I ll have to buy a laptop soon enough and am really considering macbooks right now |
| 08:26.21 | mihaineacsu | that's I did initially |
| 08:26.28 | mihaineacsu | that's why I* |
| 08:26.40 | MarcTannousSchoo | Also there's a lot of OSX-only design tools |
| 08:26.41 | MarcTannousSchoo | :/ |
| 08:26.50 | andrei_ | Marc: It's more complicated than I put it but: In windows, the GUI/Window Manager/UI is bound to the OS, it's one piece. On linux, it's a separate part |
| 08:26.58 | andrei_ | you have Gnome now, you could change to KDE |
| 08:27.04 | andrei_ | without reinstalling your system |
| 08:27.14 | Stragus | Or you could change to any of about 200 other window managers out there |
| 08:27.15 | andrei_ | the interface and the OS are connected as a client-server |
| 08:27.23 | MarcTannousSchoo | Yeah, I got that but people said Gnome is pretty User-firendly |
| 08:27.28 | andrei_ | it is |
| 08:27.39 | Stragus | It's rather slow though, and annoying |
| 08:27.50 | MarcTannousSchoo | what would you recommend Stragus? |
| 08:27.51 | Stragus | can't live without an instant response |
| 08:28.11 | Stragus | I would still recommend that you explore Linux through Gnome or KDE for now |
| 08:28.29 | *** join/#brlcad kesha_ (~kesha@106.51.132.236) | |
| 08:28.31 | MarcTannousSchoo | Marc's journey through the mystical lands of UNIX started yesterday |
| 08:28.37 | Stragus | When you get more experienced, you can try out more... efficient environments |
| 08:28.49 | andrei_ | there's a joke with Vim |
| 08:29.02 | andrei_ | Some users are blazingly fast with Vim, others just generate trully random text trying to exit it ... |
| 08:29.18 | MarcTannousSchoo | let me just google what Vim is |
| 08:29.21 | Notify | 02GCI:saurabh997 * 5042004748664832 : Task Claimed - I would like to work on this task. |
| 08:29.38 | MarcTannousSchoo | erm |
| 08:29.40 | MarcTannousSchoo | http://www.vim.org/ |
| 08:29.43 | Stragus | Vim is a text editor, designed to be very efficient, it's also the least user-friendly environment you can imagine |
| 08:29.45 | MarcTannousSchoo | what is that picture on their landing page |
| 08:29.50 | YashM_ | So nobody plays games here? |
| 08:29.54 | Stragus | You can not do *anything* unless you know the keyboard shortcuts |
| 08:30.00 | MarcTannousSchoo | how is that code-related |
| 08:30.04 | Notify | 02GCI:popescuandrei * 5042004748664832 : Task Assigned - This task has been assigned to saurabh pathak. You have 100 hours to complete this task, good luck! |
| 08:30.37 | MarcTannousSchoo | YashM_, I played League competitively on a national-level for the past 2 years, but have quit right now as it's pretty much gone to shit |
| 08:30.50 | MarcTannousSchoo | YashM_, nowadays I'm just a high rank on tetris |
| 08:31.01 | Stragus | Does Chess count? Or Scrabble, home-made AD&D... |
| 08:31.06 | YashM_ | Hehe |
| 08:31.33 | MarcTannousSchoo | You need others for Chess though and you have to wait for their move |
| 08:31.40 | MarcTannousSchoo | You want an instant response :P |
| 08:31.56 | Stragus | I make an exception for Chess :p |
| 08:32.14 | YashM_ | I play a lot of games ranging from indies to AAA :P |
| 08:32.28 | andrei_ | same as Marc, I keep dualboot as well |
| 08:32.31 | andrei_ | I play on windows |
| 08:32.42 | Stragus | I'm a little afraid of trying games, I know I can get hooked |
| 08:32.57 | Stragus | And since I work remotely from home, I could do nothing else for a month easily |
| 08:33.07 | MarcTannousSchoo | I'll have a very important exam in about an year, I am not touching MMOs |
| 08:33.20 | MarcTannousSchoo | They might just ruin my life |
| 08:33.21 | MarcTannousSchoo | :)) |
| 08:33.29 | andrei_ | but you will gain so many more ! |
| 08:33.37 | MarcTannousSchoo | Those legendary items tho |
| 08:33.44 | MarcTannousSchoo | They're not gonna grind themselves up, are they |
| 08:34.38 | Stragus | I did get hooked on Diablo 3 on Hardcore (normal had no interest), until server issues killed my character (permanently) twice in a row at Hell difficulty |
| 08:34.59 | Stragus | I complained to Blizzard and they actually gave me a refund |
| 08:35.02 | MarcTannousSchoo | Didn't they like remove the auction house for some reason? |
| 08:35.05 | YashM_ | lol |
| 08:35.11 | andrei_ | a refund of what sort ? |
| 08:35.20 | Stragus | Full purchase price, refunded |
| 08:35.26 | andrei_ | aah, I thought the character |
| 08:35.35 | andrei_ | their customer service tends to be alright |
| 08:35.42 | YashM_ | I heard Diablo II is much better than III |
| 08:35.53 | andrei_ | mh, that depends |
| 08:35.54 | Stragus | Yes, they completely messed up Diablo III |
| 08:35.55 | MarcTannousSchoo | That's just nostalgic people reviewing stuff |
| 08:35.59 | Stragus | The storyline is *pathetic* |
| 08:36.08 | MarcTannousSchoo | However some parts of D3 really are so poorly executed that |
| 08:36.13 | andrei_ | I somehow have the same view as Marc |
| 08:36.18 | Stragus | It's like a kid story, proper for a 7 years old. The vilains are all idiots, it's simplistic |
| 08:36.24 | MarcTannousSchoo | I don't even understand what they wanted to do |
| 08:36.35 | MarcTannousSchoo | Stragus: Also, all allies are actually baddies |
| 08:36.39 | MarcTannousSchoo | Stragus: epic plot twists |
| 08:36.46 | Stragus | Diablo is supposed to be dark, Diablo 3 made it a kid story |
| 08:36.49 | andrei_ | I like transformers storyline *flies away* |
| 08:36.59 | Stragus | Plot twists? They were all obvious miles ahead |
| 08:37.07 | MarcTannousSchoo | "plot twists" |
| 08:37.19 | YashM_ | So is anyone on Steam? |
| 08:37.29 | andrei_ | nah |
| 08:37.32 | MarcTannousSchoo | Don't install steam |
| 08:37.42 | MarcTannousSchoo | Your wallet will disappear |
| 08:37.56 | andrei_ | I d have a rather sexist joke regarding that |
| 08:38.02 | MarcTannousSchoo | :)) |
| 08:38.11 | Stragus | Ah Diablo 3... Some evil archdemon, the greatest tactician of hell and over-general of hell legions, turned out to be a complete idiot |
| 08:38.14 | YashM_ | I used to buy games with money I made online |
| 08:38.27 | Stragus | Laughing at the players and telling them his plans in advance |
| 08:38.38 | MarcTannousSchoo | Stragus, what about your ally becoming Diablo in the end though |
| 08:38.48 | MarcTannousSchoo | Or receiving his powers and turning evil or some shit |
| 08:38.51 | MarcTannousSchoo | Can't remember exactly |
| 08:38.52 | YashM_ | There's no currency for our country in Steam #thirdworld |
| 08:39.04 | MarcTannousSchoo | I'm off to classes though guys, have fun |
| 08:39.10 | Stragus | Have fun |
| 08:46.56 | Notify | 02GCI:anshul1 * 4531831353376768 : Ready for review - The work on this task is ready to be reviewed. |
| 08:50.18 | Notify | 02GCI:mehak_s * 6359310477033472 : None - Sir, Please assign me 1 more day. Thank You. :) |
| 08:51.15 | Notify | 02GCI:popescuandrei * 6359310477033472 : Deadline extended - The deadline of the task has been extended with 1 days and 12 hours. |
| 08:59.08 | Notify | 02GCI:gjeet * 4531831353376768 : None - Nice work, it's quite different from what I have seen so far. Can you please explain your design. I couldn't understand the relation of horse with BRL-CAD. ... |
| 08:59.33 | Notify | 02GCI:gjeet * 4531831353376768 : Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to... |
| 09:11.09 | *** join/#brlcad teepee- (bc5c2133@gateway/web/freenode/ip.188.92.33.51) | |
| 09:13.53 | Notify | 02GCI:ljudusika * 5845550716944384 : Task Claimed - I would like to work on this task. |
| 09:14.33 | Notify | 02GCI:popescuandrei * 5845550716944384 : Task Assigned - This task has been assigned to Ljudusika. You have 100 hours to complete this task, good luck! |
| 09:19.51 | *** join/#brlcad teepee- (bc5c2133@gateway/web/freenode/ip.188.92.33.51) | |
| 09:21.48 | *** join/#brlcad YashM (~YashM@117.222.65.200) | |
| 09:23.31 | *** join/#brlcad merzo (~merzo@user-94-45-58-138-1.skif.com.ua) | |
| 09:23.40 | *** join/#brlcad YashM (~YashM@117.222.65.200) | |
| 10:10.42 | *** join/#brlcad adityagulati (dce32db2@gateway/web/cgi-irc/kiwiirc.com/ip.220.227.45.178) | |
| 10:21.43 | *** join/#brlcad andrei___ (c35a6e7d@gateway/web/freenode/ip.195.90.110.125) | |
| 10:27.26 | *** join/#brlcad verlet (uid57073@gateway/web/irccloud.com/x-dibfgqryweauijye) | |
| 10:29.36 | verlet | Hi |
| 10:29.44 | andrei___ | hello, verlet ! |
| 10:30.02 | verlet | I'm looking at getting my hands sort of stuck in |
| 10:30.08 | verlet | Contributing wise |
| 10:30.58 | andrei___ | awesome ! :) |
| 10:31.11 | andrei___ | By the way, have to ask, lots of traffic from it these days, are you participating in Google Code-in? |
| 10:31.25 | verlet | I'll level with you, I'm looking at maybe doing a Google summer of code thing with brlcad if brlcad are doing it, but I'd really like to get acquainted with the project first |
| 10:32.14 | andrei___ | verlet: to be quite honest, we can't know beforehand if we'll get accepted. I(personally) don t know even if the organization will apply |
| 10:32.30 | andrei___ | but sure, is there anything I can help you with? |
| 10:33.00 | verlet | How can I help, haha |
| 10:33.08 | andrei___ | first of all |
| 10:33.20 | andrei___ | do you have the sourcecode checked out from svnd |
| 10:33.22 | andrei___ | svn* |
| 10:33.23 | andrei___ | and compiled? |
| 10:33.29 | andrei___ | did you build brlcad? |
| 10:33.33 | andrei___ | if not, you can do that |
| 10:34.44 | verlet | I will do that. I'm on a 3 hour bus ride at the moment, thought I'd just drop into the irc and say hello and see what the first steps are |
| 10:34.44 | andrei___ | http://brlcad.org/wiki/Compiling |
| 10:35.14 | andrei___ | well, verlet, you have to keep in mind that during this period we're a bit packed with google Code-in |
| 10:35.24 | andrei___ | we do answer, and we are always looking for new contributors :) |
| 10:35.29 | andrei___ | but it might take us a bit more to do so |
| 10:35.52 | verlet | No worries, I'm a patient guy :) |
| 10:35.53 | andrei___ | most developers that I know of do read the backlog and answer |
| 10:36.05 | andrei___ | so if you ask something, you will get an answer |
| 10:36.09 | andrei___ | just perhaps not instantly |
| 10:39.13 | verlet | What's the Google code in |
| 10:47.59 | andrei___ | in a way, it is similar to GSoC, but it's for high school students |
| 10:48.27 | andrei___ | it involves high school students getting real world experience for the first time, interacting with open source organizations |
| 10:48.35 | andrei___ | but unlike gsoc, where you've got a 12 week project |
| 10:48.46 | andrei___ | they have a list of modular tasks, that usually take them a day or two |
| 10:56.06 | andrei___ | you can check it out yourself |
| 10:56.06 | andrei___ | https://www.google-melange.com/gci/homepage/google/gci2014 |
| 10:59.37 | Notify | 02GCI:thevk * 5874350083276800 : Task Claimed - I would like to work on this task. |
| 11:01.00 | Notify | 02GCI:popescuandrei * 5874350083276800 : Task Assigned - This task has been assigned to Vladimir Kuznetsov. You have 100 hours to complete this task, good luck! |
| 11:05.12 | Notify | 02GCI:mehak_s * 6359310477033472 : Thank You - Thank You sir. |
| 11:34.04 | *** join/#brlcad rohitagarwal (~Ravi@14.194.242.35) | |
| 11:35.36 | Notify | 02GCI:adityagulati * 5806249618702336 : Ready for review - The work on this task is ready to be reviewed. |
| 11:53.27 | *** join/#brlcad teepee- (bc5c2133@gateway/web/freenode/ip.188.92.33.51) | |
| 11:57.19 | *** join/#brlcad YashM (~YashM@59.88.31.146) | |
| 12:59.56 | *** join/#brlcad infobot (ibot@rikers.org) | |
| 12:59.56 | *** topic/#brlcad is Topic for #brlcad: BRL-CAD || http://brlcad.org || logs: http://ibot.rikers.org/%23brlcad/ || Welcome GCI 2014 participants! If you're participating, be patient when asking questions... we're very busy and sometimes have packed schedules. We will respond if you are still on IRC: learn screen+irssi. | |
| 13:00.03 | Marctannous | you submitted so many tasks in the past few days :) |
| 13:00.24 | ignacio | :P |
| 13:04.50 | Notify | 02GCI:Melange * 5765799415382016 : Task Reopened - Melange has detected that the final deadline has passed and it has reopened the task. |
| 13:07.22 | *** join/#brlcad ignacio (~IgnacioUy@unaffiliated/ignaciouy/bot/gcibot) | |
| 13:08.02 | *** join/#brlcad YashM (~YashM@117.248.201.128) | |
| 13:10.49 | *** join/#brlcad FreezingCold (~FreezingC@135.0.41.14) | |
| 13:12.17 | *** join/#brlcad teepee- (bc5c2133@gateway/web/freenode/ip.188.92.33.51) | |
| 13:16.32 | Notify | 02GCI:tannousmarc * 5338260117127168 : Task Claimed - I would like to work on this task. |
| 13:17.07 | Notify | 02GCI:popescuandrei * 5338260117127168 : Task Assigned - This task has been assigned to Marc Tannous. You have 96 hours to complete this task, good luck! |
| 13:19.04 | *** join/#brlcad YashM_ (~YashM@59.88.27.19) | |
| 13:24.17 | *** join/#brlcad _gcibot_ (ignacio@sunjammer.sugarlabs.org) | |
| 13:25.08 | *** join/#brlcad gcibot (ignacio@sunjammer.sugarlabs.org) | |
| 13:25.13 | *** join/#brlcad gcibot (ignacio@unaffiliated/ignaciouy/bot/gcibot) | |
| 13:28.37 | *** join/#brlcad kesha_ (~kesha@106.51.132.236) | |
| 13:31.27 | *** join/#brlcad teepee- (bc5c2133@gateway/web/freenode/ip.188.92.33.51) | |
| 13:32.30 | *** join/#brlcad merzo (~merzo@user-94-45-58-138-1.skif.com.ua) | |
| 13:37.22 | *** join/#brlcad parth_21 (75c83173@gateway/web/cgi-irc/kiwiirc.com/ip.117.200.49.115) | |
| 13:38.40 | parth_21 | HI!! Mentors |
| 13:40.04 | parth_21 | I would like to know that have I been blocked?? |
| 13:41.41 | *** join/#brlcad ries (~ries@D979C47E.cm-3-2d.dynamic.ziggo.nl) | |
| 13:41.48 | andrei_ | parth_21: keep the discussion public |
| 13:42.08 | andrei_ | parth_21: you haven't been blocked. You just weren't credited for work that wasn't yours |
| 13:43.40 | parth_21 | Would I be credited for my completed tasks for BRL-CAD |
| 13:44.22 | andrei_ | if you manage to actually submit your work, of course :) |
| 13:45.03 | andrei_ | there is no issue on our side with you particularly, we rejected all forge attempts :) |
| 13:45.09 | andrei_ | and keep doing so |
| 13:45.52 | parth_21 | That work was mine As I have already said that I have accesed to the document ""Introduction to MGED"" |
| 13:46.29 | parth_21 | I unclaimed that task because I have got some other easy task |
| 13:46.32 | YashM_ | andrei_, do you know if new tasks are scheduled to come? |
| 13:46.48 | andrei_ | YashM: there are about 80 new, but I don t know when |
| 13:47.06 | andrei_ | YashM: try pinging brlcad or maths22, one of them has to know |
| 13:47.16 | YashM_ | andrei_, :o I'll be waiting for it :) |
| 13:47.22 | YashM_ | Code or UI? |
| 13:47.24 | YashM_ | or both |
| 13:47.32 | andrei_ | think both |
| 13:47.45 | parth_21 | Can i do more mor BRL-CAD tasks |
| 13:47.49 | andrei_ | you can |
| 13:47.58 | Marctannous | parth_21, if you submit your own work taht is |
| 13:48.02 | andrei_ | as I said, there s no problem regarding doing more tasks |
| 13:48.17 | andrei_ | if you complete them in the right way, they will be closed and completed |
| 13:48.27 | andrei_ | as it happens with any other student |
| 13:48.34 | parth_21 | thanks as i told you that task was done by me |
| 13:49.02 | andrei_ | parth_21: you keep saying that. We did look and we did find plenty of similarities |
| 13:49.12 | andrei_ | also, if I remember correctly, it wasn't even your first attempt |
| 13:49.50 | parth_21 | I swear that tasks were done by me |
| 13:50.45 | mihaineacsu | parth_21: what task did you claim? |
| 13:51.12 | parth_21 | model BRL-CAD in BRL-CAD |
| 13:51.43 | andrei_ | I recall that mihaineacsu _did_ tell you once not to submit someone else's work |
| 13:52.17 | parth_21 | I don; |
| 13:52.43 | parth_21 | I dont know who is mihaineacsu |
| 13:54.10 | parth_21 | I was told by Rohit this morning that I had been blocked by you |
| 13:54.39 | andrei_ | http://www.google-melange.com/gci/task/view/google/gci2014/4936325870387200 this is your task. |
| 13:54.40 | gcibot | Design a website icon set for brlcad.org |
| 13:54.40 | gcibot | Status: Closed |
| 13:54.40 | gcibot | Mentor(s): Isaac Kamga, Gauravjeet Singh |
| 13:55.07 | andrei_ | http://www.google-melange.com/gci/task/view/google/gci2014/6082457623330816 and this one submitted before |
| 13:55.08 | gcibot | Model BRL-CAD logo in BRL-CAD #3 |
| 13:55.08 | gcibot | Status: Closed |
| 13:55.08 | gcibot | Mentor(s): Mihai Neacsu, Gauravjeet Singh |
| 13:56.00 | andrei_ | They do seem similar |
| 13:56.02 | andrei_ | or am I wrong? |
| 13:56.47 | Marctannous | they even have the exact same file sizes -.- |
| 13:56.51 | parth_21 | I told you abot the icon set task how i did it each and every thing which was closed by me |
| 13:57.20 | andrei_ | also, someone complained about http://www.google-melange.com/gci/task/view/google/gci2014/4936325870387200 being forged |
| 13:57.22 | gcibot | Design a website icon set for brlcad.org |
| 13:57.22 | gcibot | Status: Closed |
| 13:57.22 | gcibot | Mentor(s): Isaac Kamga, Gauravjeet Singh |
| 13:58.10 | parth_21 | Pls read the comments |
| 13:58.37 | parth_21 | in that task I have properly described about my task |
| 13:58.37 | andrei_ | I did. |
| 13:58.50 | andrei_ | my strategy for designing icons was first creating sone good icons in an desktop app named ICONION and then modifying them in photoshop. It seems easy but i did a lot of effort in first selecting app downloading the app and then modifying the icons in Photoshop. I spent a day on this task. These icons are recommended for your new website for menus like documentation ,gallery, home , blog etc. |
| 13:59.05 | parth_21 | And then please let me know the query |
| 13:59.19 | andrei_ | This doesn't seem specific at all |
| 13:59.34 | parth_21 | I cant see anyone who complaint about me |
| 13:59.36 | andrei_ | In any case, I need to leave. You aren't "blocked" and there is no "penalty" on you |
| 13:59.48 | parth_21 | Thanks for that |
| 13:59.49 | andrei_ | you just need to submit your own work |
| 13:59.53 | andrei_ | and explain your choices |
| 13:59.58 | andrei_ | like every other student does |
| 14:00.15 | andrei_ | bye, people ! |
| 14:00.16 | parth_21 | And I will and was be submitting my own task |
| 14:00.25 | parth_21 | Bye andrei_ |
| 14:00.47 | Notify | 02GCI:mjuvekar7 * 5293529710460928 : Rough Idea? - Can you give me a rough idea about how to go about this task? |
| 14:06.38 | Notify | 02GCI:rossberg * 5806249618702336 : None - Looks good. A region turret with epa.1 would make it even better. |
| 14:06.39 | Notify | 02GCI:rossberg * 5806249618702336 : Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to... |
| 14:10.19 | Notify | 02GCI:adityagulati * 5806249618702336 : Query - Sir, I didn't quite understand what you mean, Do I need to make a new turret or Make a new region containing epa.1 or Something else. Regards, ... |
| 14:11.44 | Notify | 02GCI:adityagulati * 5806249618702336 : Ready for review - The work on this task is ready to be reviewed. |
| 14:13.52 | *** join/#brlcad rohitagarwal (~Rohit@49.249.53.75) | |
| 14:14.18 | *** join/#brlcad parth_21 (75c83173@gateway/web/cgi-irc/kiwiirc.com/ip.117.200.49.115) | |
| 14:14.28 | *** join/#brlcad archivist (~archivist@host81-149-189-98.in-addr.btopenworld.com) | |
| 14:15.30 | Notify | 02GCI:rossberg * 5806249618702336 : None - The turret is an independent part of the tank, eg it could be turned. That's why you should make a region of it. Eg by creating a region "turret" and... |
| 14:16.20 | Notify | 02GCI:rossberg * 5806249618702336 : Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to... |
| 14:21.21 | Notify | 02GCI:adityagulati * 5806249618702336 : Ready for review - The work on this task is ready to be reviewed. |
| 14:22.09 | Notify | 02GCI:rossberg * 5293529710460928 : None - Take the files generated in the mentioned task (the CSV tables) and generated a .g file with the comgeom-g program. This probably doesn't work. So you... |
| 14:24.55 | Notify | 02GCI:rohit_agarwal * 6424327624851456 : Ready for review - The work on this task is ready to be reviewed. |
| 14:25.10 | Notify | 02GCI:rossberg * 5806249618702336 : Task Closed - Congratulations, this task has been completed successfully. |
| 14:26.35 | Notify | 02GCI:rohit_agarwal * 6424327624851456 : 2 Files Uploaded - I have uploaded the following two files- Animation 2.xcf/.png |
| 14:26.45 | Notify | 02GCI:adityagulati * 5839755866537984 : Task Claimed - I would like to work on this task. |
| 14:29.57 | Notify | 02GCI:gjeet * 5839755866537984 : Task Assigned - This task has been assigned to Aditya Gulati. You have 100 hours to complete this task, good luck! |
| 14:33.32 | *** join/#brlcad alisha_ (~alisha@115.241.152.220) | |
| 14:36.10 | Notify | 02GCI:rossberg * 6424327624851456 : None - Is it possible to make it continuously moving without the short stops? |
| 14:36.25 | Notify | 02GCI:rossberg * 6424327624851456 : Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to... |
| 14:39.35 | Notify | 02GCI:rohit_agarwal * 6424327624851456 : Ready for review - The work on this task is ready to be reviewed. |
| 14:41.06 | Notify | 02GCI:rohit_agarwal * 6424327624851456 : No stops in the new file - I removed the stop and uploaded the new file (Animation 2 continuous.gif) |
| 14:44.06 | Notify | 02GCI:rossberg * 6424327624851456 : Task Closed - Congratulations, this task has been completed successfully. |
| 14:46.25 | *** join/#brlcad teepee- (bc5c2133@gateway/web/freenode/session) | |
| 14:48.38 | adityagulati | can someone tell me how to get a white background while rendering |
| 14:49.40 | YashM_ | rt -C 255/255/255 |
| 14:50.46 | adityagulati | Thanks |
| 14:50.55 | adityagulati | I was using small c |
| 14:51.08 | adityagulati | instead of capital C |
| 14:53.39 | *** join/#brlcad kesha_ (~kesha@106.51.132.236) | |
| 14:54.11 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) | |
| 14:54.23 | Notify | 02GCI:rohit_agarwal * 6349681697226752 : Task Claimed - I would like to work on this task. |
| 14:54.32 | *** part/#brlcad rohitagarwal (~Rohit@49.249.53.75) | |
| 14:55.11 | *** join/#brlcad teepee- (bc5c2133@gateway/web/freenode/session) | |
| 15:00.57 | *** part/#brlcad adityagulati (dce32db2@gateway/web/cgi-irc/kiwiirc.com/ip.220.227.45.178) | |
| 15:01.06 | Notify | 02GCI:adityagulati * 5839755866537984 : Ready for review - The work on this task is ready to be reviewed. |
| 15:02.47 | Notify | 02GCI:gjeet * 6349681697226752 : Task Assigned - This task has been assigned to Rohit Agarwal. You have 100 hours to complete this task, good luck! |
| 15:09.01 | Notify | 02GCI:mjuvekar7 * 4824199776436224 : Task Claimed - I would like to work on this task. |
| 15:10.19 | Notify | 02GCI:mehak_s * 6359310477033472 : Ready for review - The work on this task is ready to be reviewed. |
| 15:12.24 | Notify | 02GCI:utkarshsingh341 * 6080352686702592 : Task Claimed - I would like to work on this task. |
| 15:16.00 | Notify | 02GCI:rossberg * 4824199776436224 : Task Assigned - This task has been assigned to mandarj. You have 100 hours to complete this task, good luck! |
| 15:16.48 | *** join/#brlcad teepee- (bc5c2133@gateway/web/freenode/session) | |
| 15:18.10 | Notify | 02GCI:rossberg * 6080352686702592 : Task Assigned - This task has been assigned to utkarshsingh. You have 100 hours to complete this task, good luck! |
| 15:21.47 | Notify | 02GCI:utkarshsingh341 * 6080352686702592 : None - there was a design guideline given in the description. do we have to refer to the same color schemes, font-styles etc. and i wanted to know from... |
| 15:25.55 | *** join/#brlcad teepee- (bc5c2133@gateway/web/freenode/ip.188.92.33.51) | |
| 15:25.58 | *** join/#brlcad MarcTannous (5679c4d5@gateway/web/cgi-irc/kiwiirc.com/session) | |
| 15:26.27 | *** join/#brlcad MarcTannous (5679c4d5@gateway/web/cgi-irc/kiwiirc.com/ip.86.121.196.213) | |
| 15:28.12 | *** join/#brlcad teepee (~teepee@gateway/tor-sasl/teepee) | |
| 15:28.44 | Notify | 03BRL-CAD:carlmoore * 63753 (brlcad/trunk/doc/html/manuals/mged/mged_gui.html brlcad/trunk/include/pstdint.h and 14 others): many minor fixes, usually involving the use of apostrophe (do not confuse its and it's) |
| 15:29.12 | Notify | 03BRL-CAD:peter-sa * 63754 brlcad/trunk/src/libbu/tests/bu_semaphore.c: Apply GCI task https://www.google-melange.com/gci/task/view/google/gci2014/6370679909777408 with slight modifications that fixes the bu_semaphore tests on single-core systems by setting BU_PARALLEL_DEBUG in order to allow the creation of more than one thread on single-core systems. |
| 15:29.13 | gcibot | Fix any failing unit test #9 |
| 15:29.13 | gcibot | Status: Closed |
| 15:29.13 | gcibot | Mentor(s): Gauravjeet Singh, Dishank |
| 15:29.46 | Notify | 02GCI:arnav * 5765799415382016 : Task Claimed - I would like to work on this task. |
| 15:30.07 | Notify | 02GCI:arnav * 5765799415382016 : Claim Removed - The claim on this task has been removed, someone else can claim it now. |
| 15:37.39 | Notify | 02GCI:mihaineacsu29 * 6080352686702592 Design a new website landing page for BRL-CAD #7 https://www.google-melange.com/gci/task/view/google/gci2014/6080352686702592: None Hello utkarshsingh, ... |
| 15:40.25 | Notify | 02GCI:alonzo_ * 5872132672192512 : Task Claimed - I would like to work on this task. |
| 15:41.43 | Notify | 02GCI:mihaineacsu29 * 5872132672192512 : Task Assigned - This task has been assigned to ofnlut_. You have 100 hours to complete this task, good luck! |
| 15:47.50 | Notify | 03BRL-CAD:peter-sa * 63755 brlcad/trunk/src/libbn/tests/CMakeLists.txt: Apply GCI task https://www.google-melange.com/gci/task/view/google/gci2014/5028266490462208 that adds unit tests for the libbn quaternion functions in src/libbn/qmath.c. |
| 15:47.51 | gcibot | Create numerics library (LIBBN) unit test for qmath.c |
| 15:47.52 | gcibot | Status: Closed |
| 15:47.52 | gcibot | Mentor(s): Hardeep Singh Rai, Gauravjeet Singh |
| 15:49.11 | *** join/#brlcad andrei_ (050cdde7@gateway/web/freenode/ip.5.12.221.231) | |
| 15:52.24 | Notify | 02GCI:surajgoel1225 * 6178630262587392 : Ready for review - The work on this task is ready to be reviewed. |
| 15:53.21 | Notify | 03BRL-CAD:peter-sa * 63756 brlcad/trunk/doc/docbook/system/mann/en/brep.xml: Apply GCI task https://www.google-melange.com/gci/task/view/google/gci2014/5786731743805440 that expands the 'brep' command man page to include a short description of most of the command's options, as well as a few more examples. |
| 15:53.21 | gcibot | Update and expand our "brep" command manual page |
| 15:53.21 | gcibot | Status: Closed |
| 15:53.21 | gcibot | Mentor(s): Sean, Ch3ck |
| 16:01.40 | andromeda-galaxy | brlcad: just so you know, I was just investigating the test empty parsing stuff and using \0 in the CMakeLists.txt also doesn't work; CMake still strips it, and \\0 gives a literal '\0'. |
| 16:01.44 | andromeda-galaxy | in the string |
| 16:06.03 | andromeda-galaxy | andrei_, Stragus: just looking over your distro discussion from last night... I'll chime in here on Stragus's side with 'Gentoo is awesome' --- but also note thta if you try to use something like Paludis for package management instead of portage, it can get at least as broken as pacman... |
| 16:09.07 | Notify | 02GCI:anshul1 * 4531831353376768 : None - sir i compared it with a horse which always wins a derby race amongst all the CAD softwares.... and it would be in a blank t-shirt and the last line, it... |
| 16:17.36 | Notify | 03BRL-CAD:peter-sa * 63757 (brlcad/trunk/include/bn/vectfont.h brlcad/trunk/include/vectfont.h and 4 others): Apply GCI task https://www.google-melange.com/gci/task/view/google/gci2014/5309182718771200 that removes the tp_c* global variables. |
| 16:17.37 | gcibot | Eliminate any library global variable #2 |
| 16:17.37 | gcibot | Status: Closed |
| 16:17.37 | gcibot | Mentor(s): Isaac Kamga, Popescu Andrei |
| 16:31.06 | Notify | 02GCI:samrat_singh * 5625032667561984 : Task Claimed - I would like to work on this task. |
| 16:40.52 | Notify | 02GCI:deepakkumarsharma * 5625032667561984 : Task Assigned - This task has been assigned to Sammy. You have 100 hours to complete this task, good luck! |
| 16:43.22 | *** join/#brlcad YashM_ (~YashM@59.88.27.19) | |
| 16:51.40 | Notify | 02GCI:ekamjot01 * 5907948270256128 : Ready for review - The work on this task is ready to be reviewed. |
| 16:53.21 | Notify | 02GCI:ekamjot01 * 5907948270256128 : Uploaded - Hi!! I uploaded another design of video. I hope it seems good. Thanks. Regards Ekamjot |
| 16:58.02 | Notify | 02GCI:skyler_007 * 6169030943571968 : Final work - Thank you for all the suggestions. Please view the final files, ie 1. BRL-Large-screen design.pdf 2. changes.txt 3. BRL- Small... |
| 16:58.12 | Notify | 02GCI:skyler_007 * 6169030943571968 : Ready for review - The work on this task is ready to be reviewed. |
| 16:59.52 | *** join/#brlcad teepee- (bc5c2133@gateway/web/freenode/ip.188.92.33.51) | |
| 17:19.42 | *** join/#brlcad witness___ (uid10044@gateway/web/irccloud.com/x-qlieakotaccioxpg) | |
| 17:21.21 | *** join/#brlcad MarcUNIX (5679c4d5@gateway/web/cgi-irc/kiwiirc.com/ip.86.121.196.213) | |
| 17:23.05 | Notify | 02GCI:Melange * 6169030943571968 : No more Work can be submitted - Melange has detected that the deadline has passed and no more work can be submitted. The submitted work should be reviewed. |
| 17:27.38 | *** join/#brlcad MarcUNIX (5679c4d5@gateway/web/cgi-irc/kiwiirc.com/ip.86.121.196.213) | |
| 17:28.07 | MarcUNIX | Finally I managed to make both my monitors work on Debian and just found out about the multi-workspace stuff on Linux |
| 17:28.08 | MarcUNIX | this is awesome |
| 17:28.10 | MarcUNIX | :O |
| 17:29.17 | andromeda-galaxy | MarcUNIX: what WM/DE are you using? |
| 17:30.59 | MarcUNIX | WM/DE=? |
| 17:31.11 | MarcUNIX | I'm on Debian 7.5 with a gnome Desktop environment if that's what you are asking |
| 17:31.49 | andromeda-galaxy | ah.. gnome 3 |
| 17:31.59 | andromeda-galaxy | (DE stands for Desktop Environment, WM for Window Manager) |
| 17:32.28 | andromeda-galaxy | I'm using Xmonad for a WM... |
| 17:37.40 | Notify | 03BRL-CAD:starseeker * 63759 brlcad/trunk/doc/docbook/system/mann/en/CMakeLists.txt: Stub in a bot man page - just arg list so far, no details |
| 17:38.12 | Notify | 03BRL-CAD:starseeker * 63760 brlcad/trunk/CMakeLists.txt: Backwards compatibility for pre 3.0 CMake. |
| 17:44.48 | Notify | 02GCI:o7p9bxbnyj * 6099389458153472 : Task Claimed - I would like to work on this task. |
| 17:51.00 | *** join/#brlcad sofat (~sofat@202.164.45.204) | |
| 18:09.25 | Notify | 02GCI:aalok_sathe * 4938019295461376 : Ready for review - The work on this task is ready to be reviewed. |
| 18:11.17 | *** join/#brlcad MarcTannous (5679c4d5@gateway/web/cgi-irc/kiwiirc.com/ip.86.121.196.213) | |
| 18:11.41 | MarcTannous | Through a series of unfortunate mistakes I messed up xorg.conf to the point where linux failed to boot and was giving me just a blinking cursor |
| 18:11.58 | MarcTannous | So I just formatted the whole partition and will try installing Debian again tommorow :( |
| 18:12.05 | MarcTannous | Should I install Debian or Ubuntu guys? |
| 18:12.47 | Notify | 02GCI:deepakkumarsharma * 6099389458153472 : Task Assigned - This task has been assigned to Andromeda Galaxy. You have 100 hours to complete this task, good luck! |
| 18:15.43 | mihaineacsu | MarcTannous: try Ubuntu first :) |
| 18:16.00 | MarcTannous | I have no idea how I can possibly be this bad |
| 18:16.18 | MarcTannous | All I wanted to do was get my second monitor working properly and I somehow got to the point of having to format the partition |
| 18:16.25 | MarcTannous | In the course of 10 minutes |
| 18:16.27 | mihaineacsu | don't...for now, don't :) |
| 18:16.40 | mihaineacsu | of course, it might work better on ubuntu |
| 18:17.01 | MarcTannous | don't what? |
| 18:17.11 | mihaineacsu | don't try too hard to get the second monitor working |
| 18:17.26 | MarcTannous | I'm done with highschool until January |
| 18:17.37 | MarcTannous | I'll start trying to re-install tomorrow morning |
| 18:17.38 | MarcTannous | First thing |
| 18:17.44 | mihaineacsu | if you end up with the blinking cursor you can still restore to your initial setup |
| 18:18.13 | MarcTannous | meh, a lot of people said I should try Ubuntu |
| 18:18.29 | MarcTannous | Will try Ubuntu |
| 18:18.56 | andrei_ | it's the most introductory linux system |
| 18:18.58 | andrei_ | a lot like windows |
| 18:19.53 | MarcTannous | Just the thought of having to re-install all those packages |
| 18:19.55 | MarcTannous | oh god |
| 18:21.16 | mihaineacsu | :) |
| 18:21.32 | andrei_ | actually, Marc |
| 18:21.37 | andrei_ | ubuntu comes with quite a lot |
| 18:21.38 | andrei_ | of packages |
| 18:21.43 | MarcTannous | thank god |
| 18:21.43 | andrei_ | I honestly doubt you d have to reinstall much |
| 18:21.52 | mihaineacsu | yeah |
| 18:22.39 | MarcTannous | cmake,gcc,g++,simian? |
| 18:22.51 | MarcTannous | probably all but simian are already installed, right? |
| 18:23.18 | andrei_ | yeah |
| 18:23.20 | andrei_ | simian isn't |
| 18:23.27 | andrei_ | but as far as I remember |
| 18:23.29 | andrei_ | it s extremely light |
| 18:24.50 | MarcTannous | yup |
| 18:24.56 | MarcTannous | and the only one not causing issues :P |
| 18:25.21 | MarcTannous | hope the strstream/sstream automatically fixes itself with Ubuntu, if it doesn't, it's probably an issue with the src code that I will report |
| 18:25.31 | MarcTannous | strstream/sstream issue* |
| 18:35.27 | Notify | 03BRL-CAD:starseeker * 63761 brlcad/trunk/src/librt/test_shape_recognition.cpp: more shape recognition tests |
| 18:40.31 | *** join/#brlcad alisha_ (~alisha@115.241.237.48) | |
| 18:41.45 | starseeker | confound it, there's a problem with g-step |
| 18:44.28 | *** join/#brlcad milamber (~devli_000@104-9-73-54.lightspeed.cicril.sbcglobal.net) | |
| 18:50.36 | starseeker | MarcTannous: that's almost certainly some package you need to install |
| 18:50.47 | starseeker | (strstream/sstream) |
| 18:50.53 | starseeker | did apt-cache report anything? |
| 18:51.55 | MarcTannous | strstrream/sstream are C libraries |
| 18:51.59 | MarcTannous | and gcc was up-to-darte |
| 18:52.08 | MarcTannous | did not run apt-cache, will do tomorrow when I install ubuntu |
| 18:52.18 | starseeker | but if it's a missing dev file (header, etc.) you can search for it with apt-cache search |
| 18:52.29 | starseeker | will tell you what package has it |
| 18:52.49 | MarcTannous | damn |
| 18:52.54 | MarcTannous | if only I knew that yesteday |
| 18:53.15 | MarcTannous | thank you though, I'm actually setting up a document right now with all the linux commands I should learn |
| 18:53.20 | starseeker | or if apt-cache doesn't have a file option (don't remember 100% for sure) the Debian package repository I htink has a search |
| 18:53.42 | starseeker | MarcTannous: well, your best bet for your second monitor is probably Ubuntu |
| 18:54.12 | MarcTannous | great |
| 18:54.14 | MarcTannous | :D |
| 18:54.17 | starseeker | most of the Debian based distros you're going to have to install at least some packages |
| 18:54.27 | MarcTannous | hope I'll get a really nice working environment going on |
| 18:54.59 | starseeker | I don't know if cmake is in by default, and you'll probably need the libXext-dev and libXi-dev packages |
| 18:55.24 | MarcTannous | wait wait |
| 18:55.29 | MarcTannous | let me note these |
| 18:55.35 | MarcTannous | cmake, liXext-dev and libXi-dev? |
| 18:55.39 | MarcTannous | for ubuntu? |
| 18:55.42 | starseeker | aren't they in doc/README.linux? |
| 18:55.53 | MarcTannous | not sure, I cleared my partition |
| 18:56.50 | starseeker | https://svn.code.sf.net/p/brlcad/code/brlcad/trunk/doc/README.Linux |
| 18:57.12 | starseeker | ok, libxi-dev and libxext-dev |
| 18:57.20 | starseeker | read the Ubuntu/Debian section |
| 18:57.41 | starseeker | you don't need the package generation part, but you will need everything else |
| 18:58.02 | MarcTannous | oh this is sweet |
| 18:58.08 | MarcTannous | I'll probably get Ubuntu running in no time |
| 18:58.22 | starseeker | I thought I posted that yesterday... must have got lost in the noise |
| 19:00.13 | starseeker | MarcTannous: make sure you note anything you need that's not there ;-) |
| 19:00.46 | MarcTannous | is there anything you know of that should be noted? |
| 19:02.19 | *** join/#brlcad FreezingCold (~FreezingC@135.0.41.14) | |
| 19:06.36 | MarcTannous | starseeker: ping |
| 19:08.51 | starseeker | not offhand |
| 19:09.09 | starseeker | but it's been a while since I set up a system from scratch |
| 19:09.38 | starseeker | if we figure out what the sstream thing was about, should add a note about it |
| 19:10.25 | MarcTannous | should do |
| 19:18.19 | *** join/#brlcad chick_ (~capslock@41.205.22.41) | |
| 20:20.05 | Stragus | MarcTannous, when you mess up the configuration of X, you can always just get a text-mode terminal and fix things manually |
| 20:20.21 | Stragus | But... it's a little hardcore for a first day on Linux, I'll give you that |
| 20:21.49 | ``Erik | MarcTannous: do you know anything about virtual consoles? (alt+f<number>) ? |
| 20:22.12 | MarcTannous | Stragus: I tried fixing it up by getting things back in nano |
| 20:22.17 | MarcTannous | Stragus: somehow messed it up even harder |
| 20:22.23 | MarcTannous | ``Erik: nope, what are those? |
| 20:23.35 | Stragus | Text-mode consoles that always work, no matter how badly broken X is :p |
| 20:23.37 | ``Erik | if you boot without X, you get a text screen... you can do alt+f1 alt+f2 alt+f3 alt+f4 ... to switch between completely different logins |
| 20:23.55 | ``Erik | if your X is jacked, you can do alt+ctl+f1 to force out of X to the first vc and fix X from there |
| 20:24.05 | ``Erik | if you have, say, 6 vc's, you can get back to X using alt+f7 |
| 20:24.22 | MarcTannous | Stragus: If I would've consulted the internet beforehand or had a little more experience, I would've solved it, but I went head first and failed miserably |
| 20:24.24 | ``Erik | and you can do alt+ctl+backspace to murder X |
| 20:24.31 | MarcTannous | ``Erik: Hope that works on Ubuntu as well, right? |
| 20:24.37 | Stragus | Works everywhere |
| 20:24.51 | ``Erik | even works on superior os's, like freebsd and solaris |
| 20:24.52 | MarcTannous | Will try it out tomorrow then |
| 20:25.03 | Stragus | ``Erik: Some "user-friendly" distributions don't let you murder X, they resurect it right away |
| 20:25.05 | teepee | no, at least the X kill tends to be disabled nowdays |
| 20:25.05 | ``Erik | I mean, other *nix os's, like ... |
| 20:25.52 | mihaineacsu | giggles at ``Erik's superior os's remark |
| 20:26.26 | ``Erik | um, hm, I vagually recall and issue like that with an ubuntu box, some "unity greeter" something was basically restarting X when it terminated... but if you end up starting X, it still dies right |
| 20:26.43 | ``Erik | an issue |
| 20:26.56 | ``Erik | if you end up starting X yourself |
| 20:27.06 | Stragus | Yes, something like that... I had to look into the process tree and kill the parent of whatever was restarting X |
| 20:27.09 | Stragus | Darn Ubuntu |
| 20:27.17 | ``Erik | should read and edit his lines before hitting return |
| 20:31.17 | *** join/#brlcad winghouchan (~winghouch@2.120.184.24) | |
| 20:32.22 | *** join/#brlcad winghouchan (~winghouch@2.120.184.24) | |
| 20:35.28 | *** join/#brlcad FreezingCold (~FreezingC@135.0.41.14) | |
| 20:46.24 | winghouchan | Any mentors online at the moment? |
| 20:48.37 | Stragus | pokes starseeker |
| 20:49.00 | Stragus | Just ask directly, someone will answer eventually |
| 20:49.25 | MarcTannous | + there are logs and mentors check those, so as long as you've asked your question and are still on IRC you'll most likely get a response |
| 20:51.05 | *** join/#brlcad FreezingCold (~FreezingC@135.0.41.14) | |
| 20:55.16 | Notify | 03BRL-CAD Wiki:Smritishah99 * 0 /wiki/User:Smritishah99: |
| 21:16.05 | MarcTannous | Okay guys, I'm out for the night |
| 21:16.07 | MarcTannous | have a good day |
| 21:27.51 | winghouchan | Stragus, MarcTannous: Yea, but I've asked a few questions over the past couple of days but haven't got a response yet :P |
| 21:29.23 | winghouchan | Stragus, MarcTannous: Thank you anyway :) It might just be timezones and me having school during the day, that makes me miss all the action |
| 21:29.37 | winghouchan | But never mind I can wait a bit |
| 21:31.28 | winghouchan | I'll ask again in case it has been missed in the logs: |
| 21:32.09 | winghouchan | Are there any definitive plans for the website? Or is it just on a to do list without a high priority? |
| 21:44.11 | winghouchan | Is it a good idea to share my email address for contact when I'm offline? |
| 21:44.29 | *** join/#brlcad ada_ (8284ad60@gateway/web/freenode/ip.130.132.173.96) | |
| 21:45.37 | *** join/#brlcad FreezingCold (~FreezingC@135.0.41.14) | |
| 21:59.43 | *** join/#brlcad FreezingCold (~FreezingC@135.0.41.14) | |
| 22:32.43 | Notify | 03BRL-CAD:carlmoore * 63762 brlcad/trunk/src/util/pixblend.c: initialize 6 variables to 0 (don't depend on system to set them to 0); provide an 'else' ('value' is 0.5 otherwise), and move gvalue=0.0 |
| 22:37.45 | *** join/#brlcad merzo (~merzo@227-114-132-95.pool.ukrtel.net) | |
| 22:48.45 | *** join/#brlcad alisha_ (~alisha@115.241.244.195) | |
| 23:07.03 | Notify | 03BRL-CAD Wiki:Andromeda-galaxy * 0 /wiki/User:Andromeda-galaxy: |
| 23:12.32 | Notify | 03BRL-CAD Wiki:Andromeda-galaxy * 0 /wiki/File:Nmg-wiki-tutorial-screenshot.png: |
| 23:13.24 | Notify | 03BRL-CAD Wiki:Andromeda-galaxy * 7829 /wiki/NMG: Created page with "[[category:tutorials]] {|align="right" |[[File:nmg-wiki-tutorial-screenshot.png|thumb|256px|Example NMG object created with "put"]] |} BRL-CAD contains a powerful Non-Mani..." |
| 23:15.53 | Notify | 03BRL-CAD Wiki:Andromeda-galaxy * 7830 /wiki/NMG: |
| 23:40.15 | andromeda-galaxy | I'm getting "input ended at non-terminal FSM state" from rt on an nmg that I created through the 'put' command manually, anyone have any idea why? |
| 23:54.42 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) | |