| 00:01.30 | andromeda-galaxy | in cv.h, there is an @file comment that has no declarations following it for a nonexistent file. Can I safely remove it? |
| 00:15.12 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) | |
| 00:28.01 | starseeker | andromeda-galaxy: might want to put the UNUSED question up to brlcad |
| 00:28.30 | starseeker | andromeda-galaxy: yes, I believe you can remove that |
| 00:35.30 | andromeda-galaxy | starseeker: okay, thanks! I did figure out a way around UNUSED |
| 00:35.41 | andromeda-galaxy | I modifyed the Doxyfile so tht UNUSED(x) -> x |
| 00:35.57 | andromeda-galaxy | starseeker: but now I've got one other question about the include/bu/ headers |
| 00:36.24 | andromeda-galaxy | some of them have the @addtogroup above the @file <headername.h>, and some below, |
| 00:36.32 | andromeda-galaxy | so some of them have that group containing that header and others don't |
| 00:36.35 | andromeda-galaxy | is that intentional? |
| 00:46.57 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) | |
| 01:07.14 | starseeker | andromeda-galaxy: offhand, I'd say that if the header has all of its contents in one group the header should be contained in the group, and otherwise not |
| 01:11.23 | andromeda-galaxy | ahhh |
| 01:11.41 | andromeda-galaxy | so it's likely on purpose then... I'll try to take a quick look through and check |
| 01:11.55 | andromeda-galaxy | so far, I've been trying to get all the @file declarations right... there are an amazing number missing |
| 01:57.27 | starseeker | andromeda-galaxy: our doxygen setup needs a lot of work - there have been several passes to arrive at the current approach, and even then it's not a for-sure final version |
| 01:58.09 | starseeker | if there are problems with how we're doing it now, we'll try to fix them - we want to eventually reach a point where our doxygen docs are the standard, high-quality developer guide to our libraries |
| 01:58.52 | starseeker | that's why libbu is so much further along than the other libs - each "pass" at doxygen got only so far, then lost steam |
| 01:59.34 | Notify | 02GCI:o7p9bxbnyj * 6391391198380032 : None - For this submission, I've fixed all of the warnings coming from libbu files that are in the output of 'make dox', and I've tried to set up all of the... |
| 01:59.40 | Notify | 02GCI:o7p9bxbnyj * 6391391198380032 : Ready for review - The work on this task is ready to be reviewed. |
| 02:01.21 | Notify | 02GCI:judebirch * 6383010643443712 : Done again - Thank you for telling me how I could make it better, I think I've done everything okay now |
| 02:01.31 | Notify | 02GCI:judebirch * 6383010643443712 : Ready for review - The work on this task is ready to be reviewed. |
| 02:14.09 | Notify | 02GCI:Melange * 5218710037987328 : Task Reopened - Melange has detected that the final deadline has passed and it has reopened the task. |
| 02:23.12 | starseeker | andromeda-galaxy: go ahead and apply the patch - looks OK |
| 02:27.56 | *** join/#brlcad andromeda_galaxy (~andromeda@108-225-17-54.lightspeed.sntcca.sbcglobal.net) | |
| 02:40.33 | starseeker | andromeda-galaxy: nevermind - I'm going to go ahead and apply it, because I'd like to rename a couple more things |
| 02:42.03 | andromeda-galaxy | starseeker: sorry, I had to leave and didn't see this... that sounds good to me; if you apply the renamed patch before the task is complete, are you able to leave a comment on the task? it would be useful to let the reviewer know that it had been already applied |
| 02:42.48 | starseeker | I don't know if I can comment - you can once you see the commit (should be a few seconds) |
| 02:44.04 | Notify | 03BRL-CAD:starseeker * 63860 (brlcad/trunk/include/bu/bu_tcl.h brlcad/trunk/include/bu/cmd.h and 19 others): Apply GCI patch https://www.google-melange.com/gci/task/view/google/gci2014/6391391198380032 for doxygen cleanup |
| 02:44.04 | gcibot | Doxygen cleanup for LIBBU || BRL-CAD || NeedsReview (3 days 19 hrs 1 min) || Isaac Kamga, Hardeep Singh Rai |
| 02:51.25 | starseeker | andromeda-galaxy: yeah, doesn't look like I can comment |
| 02:51.45 | andromeda-galaxy | starseeker: ok, I'll do it |
| 02:52.42 | andromeda-galaxy | starseeker: just curious, what did you change? |
| 02:52.43 | Notify | 02GCI:o7p9bxbnyj * 6391391198380032 : Patch already applied - starseeker already applied a slightly modified version of this patch to the main tree, so it probably won't apply cleanly. |
| 02:53.06 | starseeker | andromeda-galaxy: haven't changed anything yet - wanted to apply the patch before I did |
| 02:53.27 | andromeda-galaxy | ahh... |
| 02:53.43 | andromeda-galaxy | in that case, what are you planning on changing? you mentiond renaming a couple more things... |
| 02:54.18 | starseeker | renaming the DoxyfileLibs files primarily, but anything else I can do to clarify how this works |
| 02:55.02 | starseeker | I want to generate the inputs list for the toplevel Doxyfile.in too |
| 03:03.39 | andromeda-galaxy | ahh |
| 03:03.53 | andromeda-galaxy | makes sense.. |
| 03:44.48 | Notify | 02GCI:Melange * 6383010643443712 : No more Work can be submitted - Melange has detected that the deadline has passed and no more work can be submitted. The submitted work should be reviewed. |
| 03:59.58 | *** join/#brlcad YashM (~YashM@117.198.6.154) | |
| 04:00.58 | *** join/#brlcad FreezingCold (~FreezingC@135.0.41.14) | |
| 04:04.37 | *** join/#brlcad mihaineacsu (~mihaineac@92.81.146.119) | |
| 04:05.02 | Notify | 03BRL-CAD:starseeker * 63861 brlcad/trunk/include/bu/avs.h: remove extra closing bracket |
| 04:22.43 | Notify | 02GCI:honey * 5625032667561984 : Task Claimed - I would like to work on this task. |
| 04:26.10 | Notify | 02GCI:honey * 5625032667561984 : Claim Removed - The claim on this task has been removed, someone else can claim it now. |
| 04:48.25 | Notify | 02GCI:adrianneng * 4956557716488192 : Task Claimed - I would like to work on this task. |
| 04:52.07 | Notify | 02GCI:gjeet * 4956557716488192 : Task Assigned - This task has been assigned to Adrianne. You have 100 hours to complete this task, good luck! |
| 04:54.37 | Notify | 02GCI:gjeet * 5032082837340160 : Deadline extended - The deadline of the task has been extended with 2 days and 0 hours. |
| 05:05.25 | Notify | 02GCI:gjeet * 4938019295461376 : Hey hunar - I guess there's a little misunderstanding, as per rules of melange, one task can only be done by one person. You claimed the task, but didn't ask for... |
| 05:06.00 | *** join/#brlcad YashM_ (~YashM@117.198.0.136) | |
| 05:06.21 | Notify | 03BRL-CAD:starseeker * 63862 brlcad/trunk/include/bn/vlist.h: Tweak doxygen |
| 05:08.04 | Notify | 03BRL-CAD:starseeker * 63863 (brlcad/trunk/misc/doxygen/CMakeLists.txt brlcad/trunk/misc/doxygen/Doxyfile.in): Consolidate the individual lib dox targets and the overall target into one template. Autogenerate more of the inputs. |
| 05:11.24 | starseeker | andromeda-galaxy: That seems to make the individual dox-libbu target work better, as well as simplifying things overall |
| 05:11.35 | starseeker | make dox-libbn now also seems to be a tad more focused |
| 05:11.38 | andromeda-galaxy | starseeker: sounds good! |
| 05:12.41 | starseeker | they're all using one template now, so the output should at least be consistent... |
| 05:12.44 | *** join/#brlcad gjeet (75d6cceb@gateway/web/cgi-irc/kiwiirc.com/ip.117.214.204.235) | |
| 05:39.24 | Notify | 03BRL-CAD:starseeker * 63864 (brlcad/trunk/misc/doxygen/CMakeLists.txt brlcad/trunk/misc/doxygen/librt.dox): Add stub dox files for the other libraries. |
| 05:53.43 | *** join/#brlcad gcibot (ignacio@unaffiliated/ignaciouy/bot/gcibot) | |
| 06:01.07 | *** join/#brlcad gcibot (ignacio@unaffiliated/ignaciouy/bot/gcibot) | |
| 06:02.50 | *** join/#brlcad gcibot (ignacio@unaffiliated/ignaciouy/bot/gcibot) | |
| 06:05.26 | *** join/#brlcad gcibot (ignacio@unaffiliated/ignaciouy/bot/gcibot) | |
| 06:06.43 | *** join/#brlcad gcibot (ignacio@unaffiliated/ignaciouy/bot/gcibot) | |
| 06:23.16 | *** join/#brlcad YashM__ (~YashM@117.198.7.164) | |
| 06:29.00 | Notify | 02GCI:zehata * 5032082837340160 : Original Raw Files - Dear Mentors The problem had been solved ahead of time and I am happy to inform you that the original raw file and pictures have been... |
| 06:29.15 | Notify | 02GCI:zehata * 5032082837340160 : Ready for review - The work on this task is ready to be reviewed. |
| 07:00.11 | Notify | 02GCI:snapvai15 * 5564670123442176 : Task Claimed - I would like to work on this task. |
| 07:05.00 | Notify | 03BRL-CAD:starseeker * 63865 brlcad/trunk/include/bu/parallel.h: typo |
| 07:07.22 | Notify | 02GCI:snapvai15 * 5564670123442176 : Claim Removed - The claim on this task has been removed, someone else can claim it now. |
| 07:43.42 | *** join/#brlcad shardulc (7aaa18d3@gateway/web/freenode/ip.122.170.24.211) | |
| 07:44.03 | shardulc | hello everyone |
| 07:44.16 | shardulc | when are new tasks coming? especially dead code elimination ones? |
| 07:44.35 | shardulc | the existing dead code elimination tasks are all beginner tasks, so not everyone can claim them |
| 07:44.57 | shardulc | thanks! |
| 07:56.15 | Notify | 02GCI:smriti7545 * 5252586642866176 : Ready for review - The work on this task is ready to be reviewed. |
| 08:52.37 | *** join/#brlcad MarcTannous (5679c4d5@gateway/web/cgi-irc/kiwiirc.com/ip.86.121.196.213) | |
| 09:33.15 | *** join/#brlcad mandarj (75c32995@gateway/web/freenode/ip.117.195.41.149) | |
| 09:33.24 | mandarj | gcibot random BRL-CAD |
| 09:33.45 | mandarj | gcibot random |
| 09:33.49 | MarcTannous | ? |
| 09:50.53 | *** join/#brlcad mihaineacsu (~mihaineac@92.81.146.119) | |
| 10:07.51 | Notify | 02GCI:ishwerdas * 5049231098249216 : Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed... |
| 10:08.52 | Notify | 02GCI:ariessa * 4959197779197952 : Task Claimed - I would like to work on this task. |
| 10:11.07 | *** join/#brlcad alisha (~alisha@202.164.53.117) | |
| 10:13.24 | MarcTannous | morning guys |
| 10:15.15 | Notify | 02GCI:ishwerdas * 5049231098249216 : None - I really liked the way you explained your design. Just a few suggestions to make it look more better. The sidebar is confusing, You have objects and... |
| 10:16.17 | Notify | 02GCI:ishwerdas * 4959197779197952 : Task Assigned - This task has been assigned to ariessa. You have 100 hours to complete this task, good luck! |
| 10:20.38 | Notify | 02GCI:gjeet * 5032082837340160 : Wrong files - I guess you uploaded wrong files. In Code In Official Updated.zip there are some png files and pptx file.With raw files I meant the original software... |
| 10:20.58 | Notify | 02GCI:gjeet * 5032082837340160 : Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to... |
| 10:35.48 | Notify | 02GCI:somya_agrawal * 5625032667561984 : Task Claimed - I would like to work on this task. |
| 11:24.35 | Notify | 02GCI:deepakkumarsharma * 5625032667561984 : Task Assigned - This task has been assigned to Somya Agrawal. You have 100 hours to complete this task, good luck! |
| 11:25.14 | *** join/#brlcad merzo (~merzo@63-26-132-95.pool.ukrtel.net) | |
| 11:31.50 | YashM__ | ~seen brlcad |
| 11:31.52 | infobot | brlcad is currently on #brlcad #gsoc #stepcode #bzflag, last said: 'sudo should work now with those links in place'. |
| 11:53.48 | Notify | 02GCI:ariessa * 4959197779197952 : Claim Removed - The claim on this task has been removed, someone else can claim it now. |
| 12:16.35 | Notify | 02GCI:tannousmarc * 5796868252499968 Class diagram for Coreinterface #2 https://www.google-melange.com/gci/task/view/google/gci2014/5796868252499968: Why this took so long Initially, I started... |
| 12:16.35 | gcibot | [[ Class diagram for Coreinterface #2 || BRL-CAD || NeedsReview (44 hrs 6 min) || Popescu Andrei, Daniel_R ]] |
| 12:16.36 | Notify | 02GCI:tannousmarc * 5796868252499968 : Ready for review - The work on this task is ready to be reviewed. |
| 12:18.30 | Notify | 02GCI:ariessa * 5218710037987328 : Task Claimed - I would like to work on this task. |
| 12:18.35 | Notify | 02GCI:zehata * 5032082837340160 : Re: Wrong Files - Dear Mentors, I have used PowerPoint for the image editing as I was unable to use either Gimp or Photoshop on my computer. I had saved the files... |
| 12:18.50 | Notify | 02GCI:mihaineacsu29 * 5218710037987328 : Task Assigned - This task has been assigned to ariessa. You have 100 hours to complete this task, good luck! |
| 12:54.37 | Notify | 02GCI:ariessa * 5218710037987328 : Claim Removed - The claim on this task has been removed, someone else can claim it now. |
| 15:40.09 | *** join/#brlcad MarcTannous (5679c4d5@gateway/web/cgi-irc/kiwiirc.com/ip.86.121.196.213) | |
| 16:56.48 | Notify | 02GCI:vkostov * 5049231098249216 : Ready for review - The work on this task is ready to be reviewed. |
| 17:00.44 | Notify | 02GCI:brlcad * 5252586642866176 : needs more - Smriti, thank you uploading your work, but this needs more work. First, the task description asks you to submit an AVI or URL, not a WMV file. Second,... |
| 17:00.53 | Notify | 02GCI:brlcad * 5252586642866176 : Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to... |
| 17:00.58 | Notify | 02GCI:brlcad * 5252586642866176 : Deadline extended - The deadline of the task has been extended with 2 days and 2 hours. |
| 17:03.35 | YashM__ | brlcad, you here? |
| 17:06.24 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) | |
| 17:18.56 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) | |
| 17:22.43 | *** join/#brlcad gcibot (ignacio@unaffiliated/ignaciouy/bot/gcibot) | |
| 17:26.53 | YashM__ | Are new tasks coming anytime soon? |
| 17:51.49 | Notify | 02GCI:rossberg * 5796868252499968 : Not bad - but you should omit the methods and parameters of Object too (they are errors in it anyway), rearrange the primitive classes such that the image can... |
| 17:51.50 | Notify | 02GCI:rossberg * 5796868252499968 : Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to... |
| 17:51.51 | Notify | 02GCI:rohit_agarwal * 5836136417067008 : Another Request - Sir my video is almost complete. It only requires some finishing touches. I just need a little time for editing and uploading it. I will... |
| 18:03.06 | *** join/#brlcad ries (~ries@D979C47E.cm-3-2d.dynamic.ziggo.nl) | |
| 18:10.07 | Notify | 02GCI:rossberg * 6383010643443712 : Deadline extended - The deadline of the task has been extended with 2 days and 0 hours. |
| 18:12.32 | Notify | 02GCI:rossberg * 6383010643443712 : Not bad - At the first sight the model looks OK, but this task requires a rendered image too. Could you please upload a ray-traced image of your geometry? |
| 18:12.37 | Notify | 02GCI:rossberg * 6383010643443712 : Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to... |
| 18:17.06 | *** join/#brlcad alisha (~alisha@101.60.175.173) | |
| 18:17.54 | *** join/#brlcad albertcoder (~albertcod@202.164.45.208) | |
| 18:20.15 | *** join/#brlcad sofat (~sofat@202.164.45.204) | |
| 18:20.48 | *** join/#brlcad sofat (~sofat@202.164.45.204) | |
| 18:23.39 | Notify | 02GCI:judebirch * 6383010643443712 : Ready for review - The work on this task is ready to be reviewed. |
| 18:26.07 | *** join/#brlcad michaelx2000 (~Thunderbi@61.245.163.61) | |
| 18:33.46 | *** join/#brlcad sofat (~sofat@202.164.45.204) | |
| 18:34.16 | Notify | 02GCI:rossberg * 5049231098249216 : In general not bad - But I can't image how this will be CAD. Therefore you should put some live in your mock-up: A geometry, some icons (showing this is really a... |
| 18:34.26 | Notify | 02GCI:rossberg * 5049231098249216 : Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to... |
| 18:35.00 | *** join/#brlcad albertcoder (~albertcod@202.164.45.208) | |
| 18:37.04 | *** join/#brlcad albertcoder (~albertcod@202.164.45.208) | |
| 18:37.35 | Notify | 02GCI:tannousmarc * 5796868252499968 : Thank you for the clarifications - Having not worked with class diagrams before and this being my probably 3rd or 4th time ever working on something... |
| 18:40.22 | Notify | 02GCI:tannousmarc * 5796868252499968 : Regarding the source - Data was collected from a local repo of rt^3, the diagram was created with the online program suggested in the reference of this task,... |
| 18:40.52 | Notify | 02GCI:tannousmarc * 5796868252499968 : Ready for review - The work on this task is ready to be reviewed. |
| 18:43.58 | *** join/#brlcad sofat (~sofat@202.164.45.204) | |
| 18:48.12 | *** join/#brlcad coderalbert (~albertcod@202.164.45.208) | |
| 18:50.23 | *** join/#brlcad sofat (~sofat@202.164.45.204) | |
| 18:52.18 | Notify | 02GCI:rossberg * 6383010643443712 : This is unfortunately not a ray-traces image - If you are doing a ray-trace (for example in archer: Raytrace->rt->512x512) you get a black window only. But the... |
| 18:52.38 | Notify | 02GCI:rossberg * 6383010643443712 : Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to... |
| 18:54.46 | *** join/#brlcad albert_coder (~albertcod@202.164.45.204) | |
| 19:11.08 | Notify | 02GCI:rossberg * 5796868252499968 Class diagram for Coreinterface #2 https://www.google-melange.com/gci/task/view/google/gci2014/5796868252499968: Some issues The arrows are wrong (direction... |
| 19:11.09 | gcibot | [[ Class diagram for Coreinterface #2 || BRL-CAD || NeedsWork || Popescu Andrei, Daniel_R ]] |
| 19:11.09 | Notify | 02GCI:rossberg * 5796868252499968 : Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to... |
| 19:28.28 | *** join/#brlcad d_rossberg (~rossberg@66-118-151-70.static.sagonet.net) | |
| 19:29.11 | *** join/#brlcad sofat (~sofat@202.164.45.204) | |
| 19:36.24 | *** join/#brlcad albert_coder (~albertcod@202.164.45.204) | |
| 20:01.55 | Notify | 02GCI:judebirch * 6383010643443712 : Ray-Tracing File - I clicked the 'Raytrace current view' button and I didn't get any file from it, when I clicked rt at the top it worked so I used the snipping... |
| 20:02.05 | Notify | 02GCI:judebirch * 6383010643443712 : Ready for review - The work on this task is ready to be reviewed. |
| 20:37.19 | *** join/#brlcad FreezingCold (~FreezingC@135.0.41.14) | |
| 21:55.13 | *** join/#brlcad ries (~ries@D979C47E.cm-3-2d.dynamic.ziggo.nl) | |
| 22:07.29 | *** join/#brlcad teepee_ (~teepee@gateway/tor-sasl/teepee) | |
| 23:07.18 | Notify | 02GCI:zehata * 5032082837340160 : Ready for review - The work on this task is ready to be reviewed. |
| 23:11.24 | Notify | 02GCI:brlcad * 6391391198380032 : Task Closed - Congratulations, this task has been completed successfully. |
| 23:18.01 | Notify | 02GCI:brlcad * 6383010643443712 : Task Closed - Congratulations, this task has been completed successfully. |
| 23:28.18 | Notify | 02GCI:judebirch * 6383010643443712 : Thank you - Thank you very much for all the help you gave me |
| 23:29.54 | Notify | 02GCI:judebirch * 5265298621988864 : Task Claimed - I would like to work on this task. |
| 23:34.09 | gcibot | For GCIL users, the leaderboard now force https connection. |
| 23:43.11 | Notify | 02GCI:brlcad * 5265298621988864 : Task Assigned - This task has been assigned to Jude. You have 100 hours to complete this task, good luck! |