| 00:27.21 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) | |
| 01:03.57 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) | |
| 01:16.39 | *** join/#brlcad nmz787_i (~nmccorkx@134.134.139.72) | |
| 02:00.36 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) | |
| 03:11.02 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) | |
| 04:00.45 | *** join/#brlcad FreezingCold (~FreezingC@135.0.41.14) | |
| 05:26.43 | Notify | 02GCI:brlcad * 5855100174073856 : Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to... |
| 05:30.22 | Notify | 02GCI:brlcad * 5855100174073856 : improvement - Vladimir, this second version is looking like am improvement, but I think a few changes will make it even better. First off, the angles between the... |
| 05:31.55 | Notify | 03BRL-CAD:brlcad * 63886 brlcad/trunk/src/libbu/scan.c: todo: skip delim chars better so any chars can be a delimiter, not sensitive to format specifier cases. just loop over them and skip until we encounter a non-delimiter. |
| 05:51.35 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) | |
| 06:01.09 | unicodesnowman | Notify looks like an epic bot o.o |
| 06:02.29 | brlcad | very useful |
| 06:05.18 | unicodesnowman | wonders how the melange integration works, maybe something org-admin related |
| 06:12.54 | brlcad | it just listens to the change notifications which go out via e-mail and is aware of their format |
| 06:13.31 | brlcad | the org just has to specify an address to send, which we have a general catch-all tracker for exactly this kind of activity |
| 06:16.06 | unicodesnowman | aha, neat! |
| 06:27.21 | Notify | 03BRL-CAD:brlcad * 63887 (brlcad/trunk/include/CMakeLists.txt brlcad/trunk/include/gcv.h): separate the translation-realted utility functions into their own header. belong in a subdir, but let things settle down a bit to see if these are even still relevant as public API or whether they should be private. |
| 06:29.48 | Notify | 03BRL-CAD:brlcad * 63888 brlcad/trunk/include/CMakeLists.txt: still need gcv.h |
| 06:33.52 | Notify | 03BRL-CAD:brlcad * 63889 (brlcad/trunk/include/CMakeLists.txt brlcad/trunk/include/gcv.h): stub in an earlier simpler version of the main api being worked on to checkpoint. it's an initial stub based on filter channels, very simple. added as a new gcv_api.h header, though it too should live in a subdir or gcv.h proper later. |
| 06:39.01 | Notify | 02GCI:smriti7545 * 5252586642866176 : Claim Removed - The claim on this task has been removed, someone else can claim it now. |
| 07:19.40 | Notify | 03BRL-CAD:brlcad * 63890 brlcad/trunk/src/libgcv/CMakeLists.txt: stub in a matching preliminary gcv application executable that does nothing, but explores the API in use. this matches the preliminary API and is undesirable in this form, but checkpointing as it was a funtionally workable. |
| 07:36.19 | *** join/#brlcad andrei_ (c35a6e7d@gateway/web/freenode/ip.195.90.110.125) | |
| 07:44.02 | Notify | 03BRL-CAD:brlcad * 63891 (brlcad/trunk/include/gcv_api.h brlcad/trunk/src/libgcv/gcv.c): another earlier form, this one a bit more stable and simple in that it avoided having the lib allocate filter constructs. similar to the prior form, but this simplified how you'd construct a chain of event as separate filter actions with reading and writing from files as special case filters (default intending to be a |
| 07:44.04 | Notify | read/write pipe). |
| 07:59.34 | *** join/#brlcad YashM (~YashM@117.198.3.93) | |
| 08:05.17 | *** join/#brlcad andrei_ (c35a6e7d@gateway/web/freenode/ip.195.90.110.125) | |
| 08:08.34 | *** join/#brlcad unicodesnowman (~unicodesn@167.160.164.140) | |
| 08:33.35 | *** join/#brlcad ries (~ries@D979C47E.cm-3-2d.dynamic.ziggo.nl) | |
| 08:52.05 | Notify | 02GCI:Melange * 4956557716488192 : Task Reopened - Melange has detected that the final deadline has passed and it has reopened the task. |
| 09:05.27 | *** join/#brlcad andrei_ (c35a6e7d@gateway/web/freenode/ip.195.90.110.125) | |
| 09:26.27 | *** join/#brlcad mihaineacsu (~mihaineac@92.85.10.174) | |
| 09:53.36 | *** join/#brlcad merzo (~merzo@82-89-133-95.pool.ukrtel.net) | |
| 10:07.37 | *** join/#brlcad YashM (~YashM@117.198.3.93) | |
| 10:47.29 | Notify | 02GCI:vs37nx * 5001497033048064 : Task Claimed - I would like to work on this task. |
| 10:48.01 | Notify | 02GCI:popescuandrei * 5001497033048064 : Task Assigned - This task has been assigned to Jacob L. You have 100 hours to complete this task, good luck! |
| 11:28.07 | Notify | 02GCI: * : - |
| 11:28.26 | *** join/#brlcad raptor (~raptor@213.222.229.241) | |
| 12:06.52 | *** join/#brlcad d_rossberg (~rossberg@66-118-151-70.static.sagonet.net) | |
| 12:10.50 | *** join/#brlcad YashM (~YashM@117.198.3.93) | |
| 12:16.52 | Notify | 02GCI:krishna_ravi * 5028787255246848 : Ready for review - The work on this task is ready to be reviewed. |
| 12:20.33 | Notify | 02GCI:asadazam * 5213338241859584 : Task Claimed - I would like to work on this task. |
| 12:21.09 | Notify | 02GCI:mihaineacsu29 * 5213338241859584 : Task Assigned - This task has been assigned to Asad. You have 100 hours to complete this task, good luck! |
| 12:22.04 | Notify | 02GCI:asadazam * 5213338241859584 : Claim Removed - The claim on this task has been removed, someone else can claim it now. |
| 12:39.42 | Notify | 02GCI:rossberg * 5028787255246848 : None - Hmm, you replace one global variable (bu_n_malloc) by another one (bu_n_malloc_calls). bu_n_malloc_calls is still a global variable, only visible in... |
| 12:39.56 | Notify | 02GCI:rossberg * 5028787255246848 : Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to... |
| 12:42.15 | *** join/#brlcad YashM (~YashM@117.198.3.93) | |
| 13:04.27 | andrei_ | d_rossberg: hey, you around? |
| 13:11.41 | *** part/#brlcad andrei_ (c35a6e7d@gateway/web/freenode/ip.195.90.110.125) | |
| 13:11.45 | *** join/#brlcad andrei_ (c35a6e7d@gateway/web/freenode/ip.195.90.110.125) | |
| 13:18.25 | Notify | 03BRL-CAD Wiki:Ayushxjin1998 * 0 /wiki/User:Ayushxjin1998: |
| 13:22.09 | *** join/#brlcad luca79 (~luca@net-37-116-126-103.cust.vodafonedsl.it) | |
| 13:49.05 | *** join/#brlcad sofat (~sofat@202.164.45.204) | |
| 13:50.02 | d_rossberg | andrei_: ? |
| 13:50.43 | sofat | maths22, hello |
| 13:50.47 | andrei_ | do you have any idea of other tasks, or do you know what's up with brlcad? |
| 13:53.01 | sofat | i am checking the everything in code its correct |
| 13:53.50 | sofat | means my side the website is run correctly but i don't know why the menu i break when you accept my pull request ? |
| 13:53.50 | brlcad | andrei: you can add more if you like, but I was intentionally letting some of the harder ones get weeneed out before our last upload |
| 13:54.12 | sofat | you have any solution ? |
| 13:54.19 | andrei_ | brlcad: I've got no idea what to add, that's why I asked |
| 13:55.18 | d_rossberg | i added nr. 391 - 394; wouldn't add more because i would like to see first how hard they are |
| 13:55.32 | sofat | hello brlcad |
| 13:56.00 | andrei_ | d_rossberg: I don t think the last three are too difficult |
| 13:56.17 | sofat | i want to ask question regarding docbook work? |
| 13:56.40 | sofat | how much work is left in this project |
| 13:58.49 | d_rossberg | the patches for the unit tests don't compile, i.e. it isn't too easy |
| 13:59.09 | andrei_ | ah, I didn't know that, but it still seems doable |
| 14:00.05 | andrei_ | brlcad: you've mentioned "last upload" , when I said there are no more tasks, I was looking in the internal repo, not on melange |
| 14:04.42 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) | |
| 14:05.05 | *** join/#brlcad sajid_ (7d1409f9@gateway/web/freenode/ip.125.20.9.249) | |
| 14:13.08 | sajid_ | leave #brlcad |
| 14:13.13 | *** part/#brlcad sajid_ (7d1409f9@gateway/web/freenode/ip.125.20.9.249) | |
| 14:19.31 | *** join/#brlcad sofat (~sofat@202.164.45.208) | |
| 14:23.42 | sofat | brlcad, please tell me |
| 14:29.17 | *** join/#brlcad YashM (~YashM@117.198.3.93) | |
| 14:31.32 | *** join/#brlcad nmz787_i (nmccorkx@nat/intel/x-jzdjqkxjugpzelce) | |
| 14:41.28 | *** join/#brlcad gcibot (ignacio@unaffiliated/ignaciouy/bot/gcibot) | |
| 14:42.28 | *** join/#brlcad sofat (~sofat@202.164.45.204) | |
| 14:43.52 | *** join/#brlcad raptor_ (~raptor@213.222.229.241) | |
| 14:47.15 | *** join/#brlcad YashM (~YashM@117.198.3.93) | |
| 15:07.07 | *** join/#brlcad YashM (~YashM@117.198.3.93) | |
| 15:18.30 | *** join/#brlcad sofat (~sofat@202.164.45.204) | |
| 15:43.28 | Notify | 02GCI:estafador * 6752373200388096 : Ready for review - The work on this task is ready to be reviewed. |
| 15:45.11 | *** join/#brlcad notify-web (~notify-we@192.30.252.33) | |
| 15:45.11 | notify-web | [13web] 15sofathitesh opened pull request #4: Theme files (06master...06master) 02http://git.io/Sivyhw |
| 15:45.11 | *** part/#brlcad notify-web (~notify-we@192.30.252.33) | |
| 15:48.39 | sofat | maths22, sent you pull request please accept it |
| 15:52.46 | Notify | 02GCI:estafador * 6752373200388096 : About Layout Design - Green Top Bar: I designed the top bar in light green as it is a relieving colour which helps to relieve users from stress when they are... |
| 15:55.52 | Notify | 02GCI:rossberg * 6752373200388096 : None - Simple, but nevertheless it contains some nice ideas. |
| 15:56.12 | Notify | 02GCI:rossberg * 6752373200388096 : Task Closed - Congratulations, this task has been completed successfully. |
| 15:56.43 | MarcTannous | d_rossberg : Were the icons in my UI design that good? |
| 15:56.53 | MarcTannous | Not the first design who takes my tool icons with copy paste |
| 15:59.01 | d_rossberg | MarcTannous: to be honest, i haven't looked so much at the icons design; i more ore less expect that they are copied from somewhere |
| 15:59.38 | d_rossberg | i look at the over-all gui design, especially for unique features/ideas |
| 16:00.09 | d_rossberg | and the last design had such a unique one |
| 16:00.12 | MarcTannous | They're quite an important part to be honest, but I'll just take it as people liking my design, was just expecting at least a notice from them |
| 16:00.27 | MarcTannous | Common courtesy |
| 16:05.59 | *** join/#brlcad sofat (~sofat@202.164.45.204) | |
| 16:11.08 | *** join/#brlcad luca79 (~luca@net-37-116-126-103.cust.vodafonedsl.it) | |
| 16:37.07 | *** join/#brlcad sofat (~sofat@202.164.45.204) | |
| 16:47.00 | Notify | 03BRL-CAD:n_reed * 63892 (brlcad/trunk/include/gcv_api.h brlcad/trunk/src/libgcv/gcv.c): Address warning 'gcv_filter(...) hides constructor for struct gcv_filter'. Doing gcv_execute(gcv_filter) instead of gcv_filter(gcv_filter), but perhaps gcv_do(gcv_action) or gcv_run(gcv_program) would be more intuitive? |
| 16:55.08 | *** join/#brlcad nmz787_i (nmccorkx@nat/intel/x-xjwdidkjqwtiybhc) | |
| 17:01.19 | brlcad | n_reed: that is a work in progress, the names continued to move around after that towards something different (gcv_filter() became the generalized form of a reader+writer initializer |
| 17:03.30 | brlcad | (don't let that stop you from making other changes, I'll merge accordingly, just to know that it's definitely not an initial or final state) ;) |
| 17:12.34 | *** join/#brlcad YashM (~YashM@117.198.3.93) | |
| 17:15.47 | *** join/#brlcad alisha (~alisha@223.225.225.108) | |
| 17:21.36 | andromeda-galaxy | brlcad: by the way, on the more tasks front, I mentioned this a couple of days ago, not sure if you saw it: is there any interest in having a set of GCI tasks for implementing generalized sweep for extrude, as discussed at about 19:06.10 in http://infobot.rikers.org/%23brlcad/20130819.html.gz? |
| 17:38.49 | sofat | brlcad, what is status of doc book project how much work is pending ? |
| 18:22.00 | *** join/#brlcad nmz787_i (~nmccorkx@192.55.54.40) | |
| 18:22.50 | *** join/#brlcad nmz787_i (~nmccorkx@192.55.54.40) | |
| 18:28.00 | *** join/#brlcad nmz787_i1 (~nmccorkx@134.134.139.76) | |
| 18:41.21 | sofat | brlcad, please tell me i want to do further work on this project |
| 19:22.44 | nmz787_i1 | python-brlcad crashes whether I used 7.24.0 or 7.24.2 :/ |
| 19:23.43 | nmz787_i1 | kanzure's repo get's further in nosetests than ncsaba's does, but their repos merged crash even sooner (segfault) |
| 19:24.41 | kanzure | haha |
| 19:24.48 | kanzure | (i'm not here at the moment.) |
| 19:30.24 | *** join/#brlcad Guest95640 (~IgnacioUy@2001:4830:134:7::11) | |
| 19:30.24 | *** join/#brlcad Guest95640 (~IgnacioUy@unaffiliated/ignaciouy) | |
| 19:31.12 | *** join/#brlcad FreezingCold (~FreezingC@135.0.41.14) | |
| 20:36.26 | *** join/#brlcad nmz787_i (~nmccorkx@192.55.54.40) | |
| 20:44.34 | Notify | 03BRL-CAD:n_reed * 63893 (brlcad/trunk/src/tclscripts/archer/Archer.tcl brlcad/trunk/src/tclscripts/archer/ArcherCore.tcl): Applying zclip values from preferences instead of the current settings conflicts with the normal semantics. Only do it when we're interactively changing the preference. |
| 21:11.16 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) | |
| 21:12.24 | Notify | 03BRL-CAD:n_reed * 63894 brlcad/trunk/src/tclscripts/archer/Archer.tcl: move duplicate switches to function |
| 21:26.36 | Notify | 03BRL-CAD:n_reed * 63895 brlcad/trunk/src/tclscripts/archer/ArcherCore.tcl: move duplicate switches to function |
| 21:36.23 | Notify | 03BRL-CAD:n_reed * 63896 brlcad/trunk/src/tclscripts/archer/Archer.tcl: consolidate duplicate code |
| 21:44.18 | krishna_ravi732 | Hi, is there any mentor for "Eliminate any library global variable #5 (https://www.google-melange.com/gci/task/view/google/gci2014/5028787255246848)"? |
| 21:44.20 | gcibot | [[ Eliminate any library global variable #5 || BRL-CAD || NeedsWork || Hardeep Singh Rai, Ch3ck ]] |
| 21:46.07 | krishna_ravi732 | Can anyone explain to me how bu_n_malloc_calls is a global variable? I thought it is a static local variable inside a function |
| 22:30.07 | Notify | 03BRL-CAD:n_reed * 63897 brlcad/trunk/src/tclscripts/archer/Archer.tcl: move duplicate code to function |
| 22:32.24 | Notify | 03BRL-CAD:carlmoore * 63898 (brlcad/trunk/doc/docbook/system/man1/en/pixcolors.xml brlcad/trunk/src/util/pixcolors.c): simplify some logic in pixcolors (don't need 'else' if 'if' part leads to an exit); touch up its man page |
| 22:36.12 | Stragus | A static local variable is still a global variable, except that it's only visible within that function |
| 22:36.59 | Stragus | The point is to get rid of global variables entirely, for a variety of reasons |
| 22:44.27 | Notify | 02GCI:angelacheng * 4956557716488192 : Task Claimed - I would like to work on this task. |
| 22:46.09 | Notify | 03BRL-CAD:n_reed * 63899 (brlcad/trunk/src/tclscripts/archer/Archer.tcl brlcad/trunk/src/tclscripts/archer/ArcherCore.tcl): consolidate duplicate menu definitions |
| 22:59.15 | Notify | 03BRL-CAD:n_reed * 63900 brlcad/trunk/src/tclscripts/archer/Archer.tcl: call parent method to avoid duplication |