At the end of 2007, preparations to convert BRL-CAD's CVS repository to Subversion began. The cvs2svn tool was used to perform the conversion, initially with version 1.5.1 but later using the latest available 2.0.1 version. The page is provided for historic reference on how the repository was converted including the steps that were taken.

Using version 1.5.1, cvs2svn using all default options took over 7 hours of processing before it filled up available hard disk space (only 3GB was available at the time). More space was made available and cvs2svn version 2.0.1 was installed, which provided a new more direct and faster method of extracting data from the CVS repository. Using the same default options, version 2.0.1 took just under 3 hours. The conversion was performed by Christopher Sean Morrison (aka brlcad). The details of this conversion process are documented in following.

CVS repository preparations

As cvs2svn reported issues in the repository processing, some repairs to BRL-CAD's CVS root was required. Working on a copy of the CVS root files, this included fixing five directory subtrees that were in the Attic:

html/manuals/Attic/mged4.0
html/Attic/release-notes
Attic/libitcl
Attic/libtcl
Attic/libtk

These directories seemed to expose a bug in cvs2svn's Attic processing. Initial thoughts were that someone had manually moved directories into the Attic, but upon further investigation it seemed more likely that this was perhaps actually proper behavior for an old version of CVS. All of the files in the Attic subdirs were properly marked as dead, and they were a hierarchy of ,v files that were properly marked as Dead revisions in that Attic subdir. Also, the directory "deletions" into the Attic were performed by multiple developers (namely butler, parker, and pjt iirc) during the late 90's, when the repository was located on an old IRIX server with an old version of cvs (pre 1.10 but unknown).

The workaround solution used, without needing to modify cvs2svn, was to create Attic directories throughout the hierarchy subfolders, move the ,v files into their respective Attic directory for each subfolder, and then move the directory up one level out of the Attic. The Attic/libitcl directory conflicted with an existing libitcl/ directory, so it was simply purged given it would not have been beneficial to preserve that external dependency history.

Another message reported by cvs2svn was that there was (exactly) one commit that had non-ascii characters. Upon investigation, it was a commit that contained an ñ in utf-8 so the --encoding option was added to use utf-8. At that point, the options being used were:

cvs2svn --encoding=utf_8 --cvs-revnums --auto-props=auto-props --eol-from-mime-type --mime-types=mime.types --dumpfile=/path/to/brlcad.dumpfile /path/to/cvs/repository

Upon performing a full checkout of the entire newly imported Subversion repository, the checkout failed in a branch (rel-5-1-branch) on checkout of cup.g from html/manuals/mged/. Upon review of the CVS root files, it was not apparent what was unique about cup.g,v other than the fact that there also existed a Cup.g,v (both of which existed in the Attic). As that file was entirely a triviality as a v4 binary BRL-CAD database file used in a documentation example, both the uppercase and lowercase files were removed.

The executable bit

Although not a critical issue as the property can easily be set on files after they're imported into Subversion, there were problems with files that were properly set as executable in CVS not getting properly set in Subversion. Some scripts got the setting while others did not, other files that CVS did not make executable upon checkout (like C source files) were getting marked as executable. It seemed to be a mix of problems, some caused by inconsistent permissions set on the CVS root files and by unexpected cvs2svn behavior that is inconsistent with the behavior of CVS.

There were indeed inconsistent permissions on the CVS root files that needed adjusting to make sure everything that should or should not be mode ugo+x had the appropriate bit setting. With the repository repaired, attention was directed at the making sure the auto-props file also has the property set on corresponding files. Even with the auto-props carefully customized to list for the files that should be executable, they still came across without the exec bit set. In fact, it seemed the care and attention more categorically made all scripts files, for example, not have the executable properly set. As the executable property is not critical, the files had the property set manually once the SVN repository went on-line.

UPDATE: Shortly after first posting this article, one of the cvs2svn developers (Michael Haggerty via IRC, thanks mhagger) contacted Sean regarding this write-up and the issues encountered with the BRL-CAD cvs2svn conversion. He reviewed the config and input file settings and noted that the executable bit problems were directly the result of the auto-props file settings being used. Contrary to SVN's behavior, cvs2svn interprets as meaning unset that property instead of setting it. So, the file needed to have something like instead of just to ensure the property was set. This was at least the behavior as of version 2.0.1 of cvs2svn. It was subsequently suggested that cvs2svn not diverge from SVN's behavior and instead allow a ! indicate the explicit unsetting of properties.

Mime types

The repository conversion went through yet another full conversion when it was discovered that several files in the repository had been marked as binary. While Subversion does have improved binary diff management than CVS, it still will not show you the diff or history of a file that is marked as binary. This was particularly detrimental in our repository as I originally used a standard Apache mime.types file in addition to a custom auto-props file. The Apache mime type for a .tcl file is application/x-tcl which Subversion only understands as "binary", making it difficult to view the history. The fix, of course, was to re-run the conversion without the Apache mime.types file but instead be much more more comprehensive about setting types in the auto-props file.

Single project vs multiproject

The default behavior of cvs2svn is to import all of the CVS modules (or projects) as a single project, putting module directories into each of the /trunk, /branches, and /tags directory. For BRL-CAD, this results in a hierarchy that looks like the following:

/trunk/CVSROOT/...srcs... /trunk/brlcad/...srcs... /trunk/...other_cvs_modules.../...srcs...

/branches/ansi-branch/brlcad/...srcs... /branches/windows-branch/brlcad/...srcs... /branches/...other_brlcad_branches.../brlcad/...srcs... /branches/...other_cvs_module_branches.../module/...srcs...

/tags/rel-5-2/brlcad/...srcs... /tags/rel-7-0-2/brlcad/...srcs... /tags/...other_brlcad_tags.../brlcad/...srcs... /tags/...other_module_tags.../module/...srcs...

Since BRL-CAD's modules really have been historically treated as entirely separate projects, it became apparent that a different hierarchy would be more desirable. It was not desirable to checkout the trunk and receive all of the former CVS modules. Similarly it was not desirable to have the extra module/project subdirectory in each of the tag and branch directories.

Instead of restructuring the layout after the import to Subversion, the BRL-CAD CVS repository conversion would be run through cvs2svn again as a "multiproject" import. It became necessary to create a cvs2svn options file where modules are individually listed. As a multiproject import, the following hierarchy results:

/CVSROOT/trunk/...srcs... /brlcad/trunk/...srcs... /...other_modules.../trunk/...srcs...

/brlcad/branches/ansi-branch/...srcs... /brlcad/branches/windows-branch/...srcs... /brlcad/branches/...other_brlcad_branches.../...srcs... /...other_modules.../branches/...other_module_branches.../...srcs...

/brlcad/tags/rel-5-2/...srcs... /brlcad/tags/rel-7-0-2/...srcs... /brlcad/...other_brlcad_tags.../...srcs... /...other_modules.../...other_module_tags.../...srcs...

This parallels the CVS root files more directly and their nature as independent projects. Upon conversion as a multiproject import, the repository was once again validated both manually and quantitatively. Creation of a Subversion repository from the dumpfile was verified. It was verified that a complete log could be extracted via "svn log" without error and that no warnings or errors existed in the cvs2svn verbose output. Also, a complete checkout of the SVN root was performed after upload to Sourceforge to verify no errors were evident.

It was later detected that permissions were incorrect on a limited set of the CVS root files (a couple dozen), but the property was fixed on those files after import into SVN.

cvs2svn Options

To perform the conversion, the following options file was used:

import re

from cvs2svn_lib.boolean import *
from cvs2svn_lib import config
from cvs2svn_lib.common import UTF8Encoder
from cvs2svn_lib.log import Log
from cvs2svn_lib.project import Project
from cvs2svn_lib.output_option import DumpfileOutputOption
from cvs2svn_lib.output_option import ExistingRepositoryOutputOption
from cvs2svn_lib.output_option import NewRepositoryOutputOption
from cvs2svn_lib.revision_reader import RCSRevisionReader
from cvs2svn_lib.revision_reader import CVSRevisionReader
from cvs2svn_lib.checkout_internal import InternalRevisionReader
from cvs2svn_lib.symbol_strategy import AllBranchRule
from cvs2svn_lib.symbol_strategy import AllTagRule
from cvs2svn_lib.symbol_strategy import BranchIfCommitsRule
from cvs2svn_lib.symbol_strategy import ExcludeRegexpStrategyRule
from cvs2svn_lib.symbol_strategy import ForceBranchRegexpStrategyRule
from cvs2svn_lib.symbol_strategy import ForceTagRegexpStrategyRule
from cvs2svn_lib.symbol_strategy import HeuristicStrategyRule
from cvs2svn_lib.symbol_strategy import RuleBasedSymbolStrategy
from cvs2svn_lib.symbol_strategy import UnambiguousUsageRule
from cvs2svn_lib.symbol_transform import RegexpSymbolTransform
from cvs2svn_lib.property_setters import AutoPropsPropertySetter
from cvs2svn_lib.property_setters import CVSBinaryFileDefaultMimeTypeSetter
from cvs2svn_lib.property_setters import CVSBinaryFileEOLStyleSetter
from cvs2svn_lib.property_setters import CVSRevisionNumberSetter
from cvs2svn_lib.property_setters import DefaultEOLStyleSetter
from cvs2svn_lib.property_setters import EOLStyleFromMimeTypeSetter
from cvs2svn_lib.property_setters import ExecutablePropertySetter
from cvs2svn_lib.property_setters import KeywordsPropertySetter
from cvs2svn_lib.property_setters import MimeMapper
from cvs2svn_lib.property_setters import SVNBinaryFileKeywordsPropertySetter

Log().log_level = Log.VERBOSE

ctx.output_option = DumpfileOutputOption(
    dumpfile_path=r'/path/to/brlcad.dumpfile',
    )

ctx.dry_run = False
ctx.revision_reader = InternalRevisionReader(compress=True)
ctx.svnadmin_executable = r'svnadmin'
ctx.sort_executable = r'sort'
ctx.trunk_only = False

ctx.prune = True

ctx.utf8_encoder = UTF8Encoder(
    [
        'ascii',
        'utf8',
        ],
    )

ctx.filename_utf8_encoder = UTF8Encoder(
    [
        'ascii',
        ],
    )

ctx.symbol_strategy = RuleBasedSymbolStrategy()
ctx.symbol_strategy.add_rule(UnambiguousUsageRule())

ctx.username = None

ctx.svn_property_setters.extend([
    AutoPropsPropertySetter(
        r'/path/to/auto-props',
        ignore_case=True,
        ),

    CVSBinaryFileEOLStyleSetter(),
    CVSBinaryFileDefaultMimeTypeSetter(),

    EOLStyleFromMimeTypeSetter(),

    DefaultEOLStyleSetter(None),

    SVNBinaryFileKeywordsPropertySetter(),
    KeywordsPropertySetter(config.SVN_KEYWORDS_VALUE),
    ExecutablePropertySetter(),

    CVSRevisionNumberSetter(),

    ])

ctx.tmpdir = r'cvs2svn-tmp'
ctx.cross_project_commits = True
ctx.cross_branch_commits = True
ctx.retain_conflicting_attic_files = False

run_options.profiling = False

ctx.add_project(
    Project(
        r'/path/to/brlcad/CVSROOT',
        'CVSROOT/trunk',
        'CVSROOT/branches',
        'CVSROOT/tags',
        )
    )
ctx.add_project(
    Project(
        r'/path/to/brlcad/brlcad',
        'brlcad/trunk',
        'brlcad/branches',
        'brlcad/tags'
        )
    )
ctx.add_project(
    Project(
        r'/path/to/brlcad/jbrlcad',
        'jbrlcad/trunk',
        'jbrlcad/branches',
        'jbrlcad/tags'
        )
    )
ctx.add_project(
    Project(
        r'/path/to/brlcad/rt^3',
        'rt^3/trunk',
        'rt^3/branches',
        'rt^3/tags'
        )
    )
ctx.add_project(
    Project(
        r'/path/to/brlcad/rtcmp',
        'rtcmp/trunk',
        'rtcmp/branches',
        'rtcmp/tags'
        )
    )
ctx.add_project(
    Project(
        r'/path/to/brlcad/web',
        'web/trunk',
        'web/branches',
        'web/tags'
        )
    )

Automatic properties

UPDATE: As noted above regarding the property settings, the auto-props file shown below was found to be not what we wanted with respect to how cvs2svn handles property settings that don't list a value. As of version 2.0.1, cvs2svn treats valueless auto-props property settings as an indicator that cvs2svn should explicitly unset the property instead of setting it. As this behavior may be changed in future versions, consult the cvs2svn documentation.

Regardless, the following auto-props file that was ultimately used for the BRL-CAD conversion is as follows:

[auto-props]
*.[0-9] = svn:mime-type=text/plain;svn:eol-style=native
*.a = svn:mime-type=application/octet-stream
*.ac = svn:eol-style=native;svn:mime-type=text/plain
*.ai = svn:mime-type=application/illustrator
*.am = svn:eol-style=native;svn:mime-type=text/plain
*.asc = svn:eol-style=native;svn:mime-type=text/plain
*.avi = svn:mime-type=video/x-msvideo
*.awk = svn:eol-style=native;svn:mime-type=text/plain
*.bat = svn:eol-style=CRLF;svn:mime-type=text/plain;svn:executable
*.bmp = svn:mime-type=image/bmp
*.c = svn:eol-style=native;svn:mime-type=text/plain
*.cc = svn:eol-style=native;svn:mime-type=text/plain
*.chm = svn:mime-type=application/octet-stream
*.com = svn:eol-style=native;svn:mime-type=text/plain
*.cpp = svn:eol-style=native;svn:mime-type=text/plain
*.cs = svn:eol-style=native;svn:mime-type=text/plain
*.css = svn:mime-type=text/css;svn:eol-style=native
*.csv = svn:eol-style=native;svn:mime-type=text/plain
*.cur = svn:mime-type=application/octet-stream
*.cxx = svn:eol-style=native;svn:mime-type=text/plain
*.decls = svn:eol-style=native;svn:mime-type=text/plain
*.def = svn:eol-style=native;svn:mime-type=text/plain
*.doc = svn:mime-type=text/plain
*.dsp = svn:eol-style=CRLF;svn:mime-type=text/plain
*.dsw = svn:eol-style=CRLF;svn:mime-type=text/plain
*.dylib = svn:mime-type=application/octet-stream
*.enc = svn:eol-style=native;svn:mime-type=text/plain
*.eps = svn:mime-type=application/postscript
*.f = svn:eol-style=native;svn:mime-type=text/plain
*.g = svn:mime-type=application/octet-stream
*.gif = svn:mime-type=image/gif
*.gpgkey = svn:mime-type=application/gpg-keys
*.gtar = svn:mime-type=application/x-gtar
*.gz = svn:mime-type=application/x-gtar
*.h = svn:eol-style=native;svn:mime-type=text/plain
*.hpp = svn:eol-style=native;svn:mime-type=text/plain
*.hqx = svn:mime-type=application/mac-binhex40
*.htm = svn:mime-type=text/html;svn:eol-style=native
*.html = svn:mime-type=text/html;svn:eol-style=native
*.hxx = svn:eol-style=native;svn:mime-type=text/plain
*.ico = svn:mime-type=image/x-icon
*.igs = svn:mime-type=model/iges
*.in = svn:eol-style=native;svn:mime-type=text/plain
*.itcl = svn:eol-style=native;svn:mime-type=text/plain
*.itk = svn:eol-style=native;svn:mime-type=text/plain
*.jar = svn:mime-type=application/java-archive
*.java = svn:eol-style=native;svn:mime-type=text/plain
*.jpeg = svn:mime-type=image/jpeg
*.jpg = svn:mime-type=image/jpeg
*.l = svn:eol-style=native;svn:mime-type=text/plain
*.log = svn:eol-style=native;svn:mime-type=text/plain
*.m4 = svn:eol-style=native;svn:mime-type=text/plain
*.man* = svn:mime-type=text/plain;svn:eol-style=native
*.mov = svn:mime-type=video/quicktime
*.mp3 = svn:mime-type=audio/mpeg
*.mpg = svn:mime-type=video/mpeg
*.ms = svn:eol-style=native;svn:mime-type=text/plain
*.msg = svn:eol-style=native;svn:mime-type=text/plain
*.n = svn:eol-style=native;svn:mime-type=text/plain
*.nsi = svn:mime-type=text/plain;svn:eol-style=native
*.pbxproj = svn:mime-type=text/plain;svn:eol-style=native
*.pdf = svn:mime-type=application/pdf
*.php = svn:mime-type=text/plain;svn:eol-style=native
*.pix = svn:mime-type=image/x-rgb
*.pl = svn:eol-style=native;svn:executable;svn:mime-type=text/plain
*.perl = svn:eol-style=native;svn:executable;svn:mime-type=text/plain
*.plist = svn:mime-type=text/plain
*.png = svn:mime-type=image/png
*.ppm = svn:mime-type=image/x-portable-pixmap
*.ppt = svn:mime-type=application/vnd.ms-powerpoint
*.ps = svn:mime-type=application/postscript
*.psd = svn:mime-type=application/photoshop
*.py = svn:eol-style=native;svn:executable;svn:mime-type=text/plain
*.qpg = svn:mime-type=text/xml;svn:eol-style=native
*.r = svn:eol-style=native;svn:mime-type=text/plain
*.rc = svn:eol-style=CRLF;svn:mime-type=text/plain
*.res = svn:eol-style=native;svn:mime-type=text/plain
*.rgb = svn:mime-type=image/x-rgb
*.rt = svn:eol-style=native;svn:executable;svn:mime-type=text/x-sh
*.rtf = svn:mime-type=text/rtf
*.s = svn:eol-style=native;svn:mime-type=text/plain
*.sh = svn:eol-style=native;svn:executable;svn:mime-type=text/x-sh
*.sln = svn:eol-style=CRLF
*.smil = svn:mime-type=application/smil
*.so = svn:mime-type=application/octet-stream
*.spec = svn:eol-style=native;svn:mime-type=text/plain
*.svg  = svn:mime-type=image/svg+xml
*.svgz = svn:mime-type=image/svg+xml
*.swf = svn:mime-type=application/x-shockwave-flash
*.tcl = svn:eol-style=native;svn:mime-type=text/plain
*.tk = svn:eol-style=native;svn:mime-type=text/plain
*.terms = svn:eol-style=native;svn:mime-type=text/plain
*.test = svn:eol-style=native;svn:mime-type=text/plain
*.tex = svn:mime-type=text/x-tex
*.tgz = svn:mime-type=application/x-gtar
*.tif = svn:mime-type=image/tiff
*.tiff = svn:mime-type=image/tiff
*.tr = svn:eol-style=native;svn:mime-type=text/plain
*.txt = svn:mime-type=text/plain;svn:eol-style=native
*.vbs = svn:eol-style=native;svn:mime-type=text/plain;svn:executable
*.vcf = svn:mime-type=text/x-vcard
*.vcproj = svn:eol-style=CRLF;svn:mime-type=text/plain
*.xbm = svn:mime-type=image/x-xbitmap
*.xls = svn:mime-type=application/vnd.ms-excel
*.xml = svn:mime-type=text/xml;svn:eol-style=native
*.y = svn:mime-type=text/plain;svn:eol-style=native
*.zip = svn:mime-type=application/zip
.cvsignore = svn:mime-type=text/plain;svn:eol-style=native
AUTHORS* = svn:eol-style=native;svn:mime-type=text/plain
BUGS* = svn:eol-style=native;svn:mime-type=text/plain
COPYING* = svn:eol-style=native;svn:mime-type=text/plain
ChangeLog* = svn:eol-style=native;svn:mime-type=text/plain
HACKING* = svn:eol-style=native;svn:mime-type=text/plain
INSTALL* = svn:eol-style=native;svn:mime-type=text/plain
Makefile* = svn:eol-style=native;svn:mime-type=text/plain
NEWS* = svn:eol-style=native;svn:mime-type=text/plain
README* = svn:eol-style=native;svn:mime-type=text/plain
TODO* = svn:eol-style=native;svn:mime-type=text/plain
### catch-all for files starting and ending in all caps with optional (e.g. READ.ME)
[A-Z._][A-Z._]*[A-Z._] = svn:eol-style=native;svn:mime-type=text/plain

UPDATE: The auto-props shown above is shown for historic purposes only. If you're looking for an up-to-date auto-props file to work with, you may want to try using this one from Sean instead.

Results and statistics

The final cvs2svn processing was performed on:

FreeBSD bz.bzflag.bz 5.2.1-RELEASE FreeBSD 5.2.1-RELEASE #0: Mon Feb 23 20:45:55 GMT 2004 root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC i386 Intel(R) Celeron(R) CPU 2.40GHz w/ 1GB mem

The conversion resulted in a 2.8GB dumpfile and provided the following summary statistics:

cvs2svn Statistics: ------------------ Total CVS Files: 20127 Total CVS Revisions: 147514 Total CVS Branches: 73233 Total CVS Tags: 281841 Total Unique Tags: 80 Total Unique Branches: 32 CVS Repos Size in KB: 516588 Total SVN Commits: 29886 First Revision Date: Thu Dec 15 19:06:47 1983 Last Revision Date: Mon Dec 31 15:25:14 2007 ------------------ Timings (seconds): ------------------ 1647 pass1 CollectRevsPass 0 pass2 CollateSymbolsPass 483 pass3 FilterSymbolsPass 1 pass4 SortRevisionSummaryPass 2 pass5 SortSymbolSummaryPass 459 pass6 InitializeChangesetsPass 342 pass7 BreakRevisionChangesetCyclesPass 568 pass8 RevisionTopologicalSortPass 155 pass9 BreakSymbolChangesetCyclesPass 341 pass10 BreakAllChangesetCyclesPass 376 pass11 TopologicalSortPass 330 pass12 CreateRevsPass 15 pass13 SortSymbolsPass 14 pass14 IndexSymbolsPass 3112 pass15 OutputPass 7844 total (initial pass with mime.types was 9573 total)

The result is a contiguous history of BRL-CAD development that has gone from RCS to CVS and now to SVN preserving more than 25 years of revision history. The conversion was completed on January 10th, 2008.

category:Historical documentation

Keys	Action
`?`	Open this help
`n`	Next page
`p`	Previous page
`s`	Search